Scribd
Upload
69 views1 page

6.13.3 6.13.4 6.13.5 6.13.6 7.0 7.1 Safety 7.1.1

The document provides instructions for road compaction. Materials will be rolled longitudinally from the sides towards the center. An initial pass will be done with a non-vibrating compactor followed by two passes with a vibrating compactor weighing over 12 tons. Eight passes will then be done with a tire roller. The last compaction will use a non-vibrating compactor. Safety protocols include inductions, meetings, and PPE. Workers must report accidents and signage and barricades used as needed. Environmental practices include education, waste disposal, and ensuring machinery does not leak.

Uploaded by

sujeet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

6.13.3 6.13.4 6.13.5 6.13.6 7.0 7.1 Safety 7.1.1

The document provides instructions for road compaction. Materials will be rolled longitudinally from the sides towards the center. An initial pass will be done with a non-vibrating compactor followed by two passes with a vibrating compactor weighing over 12 tons. Eight passes will then be done with a tire roller. The last compaction will use a non-vibrating compactor. Safety protocols include inductions, meetings, and PPE. Workers must report accidents and signage and barricades used as needed. Environmental practices include education, waste disposal, and ensuring machinery does not leak.

Uploaded by

sujeet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

The materials shall be rolled in longitudinal direction from the sides to the centre of the

6.13.3
carriageway.
For compaction, two times rolls pass by non-vibrate compactor prior to two times rolls
6.13.4
pass by vibrate compactor. The roller shall weigh not less than 12 tonnes.
6.13.5 Eight times rolls pass compaction shall be carried out by tyre roller.
6.13.6 The last compaction shall be done by non-vibrate compactor.

7.0 Safety And Environment

7.1 Safety
Safety induction to be conducted to all new workers that involved to this activity and safety toll box
meeting shall be conducted every day to remind the workers about
7.1.1
concerning the safety.

All workers shall be provided with PPE (Personal Protective Equipment) and shall be worn at all time on
site. Safety Manager / Safety Supervisor shallensure all the workers
7.1.2
wear all the safety equipments provided.

7.1.3 All workers shall be advised to report any accident or injury to supervisor.
Proper and adequate provision of temporary signage’s and barricades at diversions and temporary haul
7.1.4 road as necessary (if applicable).
7.2 Environment

All workers shall educate on good environmental management practices and well
7.2.1
disciplined to environment.
The garbage bin shall be provided at the working area and Supervisor shall ensure its must be collected
7.2.2
regularly and disposed off at the approved dumpsite.
All workers shall ensure that all tools and equipment machinery are in good condition to avoid any oil
7.2.3
leakage that could harm to environment.

You might also like