GLISS MASTER —

VINCENT VAN DUYSEN 2015

1—
58

The Gliss Master series of wardrobes, designed by Vincent van Duysen in 2015, extends its possibilities,
offering a wardrobe with advanced features where the main focus is on the materials. 2020 marks the
introduction of new external and internal finishes, doors with new handles and some internal fittings designed
to improve the functionality and the design of the system.
Internal finishes – Molteni&C are revolutionising the frame of the wardrobe by enriching it with four new
internal finishes: dark chestnut, light chestnut, ivory Tatami and grey Tatami.
Doors – The wardrobe system is enhanced with a new range of doors: “Quick”, a melamine door in the two
Tatami and chestnut colours. “Start CV”, with a small applied handle reminiscent of a violin key with pewter
colour and bronze finishes. “Hollow”, with a fully recessed handle with pewter colour and bronze finishes.
As well as the iconic finishes, the door experiments the Glaze finish, a new texture skilfully crafted to give
the surface a brushed effect. “Bamboo”, the Molteni range is enriched with a door covered in Eco Skin in
the five colours, as well as constant research into materials and machining processes. It recalls the use of
bamboo as a coating for surfaces. All framed by a slim pewter colour or bronze profile. Internal fittings – Gliss
Master broadens its design potential with the introduction of new fittings for the Cave handle in the melamine
drawer fronts, with pewter colour and bronze finishes and optionally covered in Eco Skin in the five colours;
the option of inserting a supplementary internal partition grid, a sloping glass shoe rack shelf with inside LED,
and, lastly, a pull-out in natural cotton in the colour ecru laundry basket. Gliss Master, is constantly evolving
to offer end users new and prestigious design solutions for contemporary living.
DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS FINISHES
MASTER—
VINCENT
VAN DUYSEN
2015 Finishes melamine piqué fine grain melamine matt glossy glaze woods coloured pewter Eco Skin extraclear net glass
structure melamine front lacquer lacquer glass/ colour/ transparent
(XQ) colours colours etched bronze glass/
components coloured transparent
glass/ stopsol/
mirror stopsol

linear module base/lid

and corner module
back panel only linear only linear

wooden central partition

wooden external side panel

extension profile
central partition
or side panel frame
central only only
frame or glass glass transparent side panel

QUICK door *
only hinged
START / TWIN door door
excluding tatami only hinged
“A FILO” door and chestnut door

2— “A FILO” glass door profile

glass
58
BAMBOO door profile
panel
only hinged
HOLLOW door door

BLADE sliding door

GRIP door
only
NICHE door vertical

GLASS door profile

glass

SISTEMA 7 wood

SISTEMA 7 glass profile

glass

SWING door

WINDOW door profile

glass

SKIN door profile

panel

* only
ivory tatami, grey tatami,
light chestnut and dark chestnut
with handle and extension profiles
side matched as per the table
(see p. 50 of the price list)

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS FINISHES
MASTER—
VINCENT
VAN DUYSEN
2015 Finishes melamine piqué melamine Eco Skin fine grain transparent pewter grey larix dark/ matt
structure melamine structure pewter pewter glass colour/ saffiano silver lacquer
pewter colour/ colour/ colour/ bronze melamine cembran/ colours
(XQ)
bronze profile bronze bronze light
profile profile chestnut
and dark
internal fittings chestnut

shelf

wooden drawer fronts H 126/190/382

tray front (trouser holders/trinket trays)

front for open drawers / pull-out trays

glass drawer fronts/ profile

glass shelf
glass

drawer internal

dividing partitions - grid with shirt /sweater holders

island drawer unit

drawer unit

3— Island with glass top

58 colours Matt lacquer Glossy Coloured

Melamine structure Etched coloured Woods Eco Skin
YM larix dark BC chalk white lacquer glass glass EU eucalyptus grey
YA silver cembran PE pearl BC chalk white BC chalk white BC chalk white RG grey oak mink
WW white DN dune PE pearl PE pearl PE pearl RF graphite oak hemp
QC light chestnut PL platinum DN dune DN dune DN dune ivory
QS dark chestnut NE black PL platinum PL platinum PL platinum dark brown
QA ivory tatami AT anthracite NE black NE black NE black
QG grey tatami SE mustard AT anthracite AT anthracite AT anthracite
SI silica SE mustard SE mustard SE mustard
Melamine front DO dolomite grey SI silica SI silica SI silica
KA cartapaglia anthracite AL clay DO dolomite grey DO dolomite grey DO dolomite grey
KB cartapaglia white MK moka AL clay AL clay AL clay
KS cartapaglia silica CZ light blue grey MK moka MK moka MK moka
ZB silk chalk white SA sand CZ light blue grey CZ light blue grey CZ light blue grey
ZS silk silica RU ruby SA sand SA sand SA sand
ZT silk dove grey PX pewter colour RU ruby RU ruby RU ruby
QC light chestnut RX copper PX pewter colour PX pewter colour PX pewter colour
QS dark chestnut TO dove grey RX copper RX copper RX copper
QA ivory tatami PR petroleum blue TO dove grey TO dove grey TO dove grey
QG grey tatami BG burgundy PR petroleum blue PR petroleum blue PR petroleum blue
BG burgundy BG burgundy BG burgundy

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS TECHNICAL INFORMATION
MASTER—
VINCENT STRUCTURE
VAN DUYSEN
2015 BASE
Wooden particleboard panel faced with melamine and adjustable feet in contact with the ground.

COVER, PARTITION AND BACK PANEL

Wooden particleboard panel faced with melamine. The partitions are provided with adjustable feet in contact with the ground.

FINE GRAIN BACK PANEL

Chipboard coated with cylinder etched coextruded sheet of ABS-PMMA, painted in specific Molteni finish.

BACK PANEL, LID, SIDE PANEL AND CENTRAL PARTITION (GLASS)

Frame perimeter in painted extruded aluminium with 4 mm tempered glass. Available in different finishes.

SIDE PANEL (MELAMINE)

Wooden particleboard panel faced with melamine. Adjustable feet in contact with the ground.

SIDE PANEL (MATT OR GLOSSY LACQUERED IN THE COLOURS)

Wooden particleboard panel faced with melamine. Outside painted in the colours of the “Molteni Range”. Adjustable feet in contact with
the ground.

SIDE PANEL (WOOD)

Wooden particleboard panel with inner melamine facing and outer facing with sliced Oak (Quercus) or Eucalyptus (Eucalyptus globulus).
Adjustable feet in contact with the ground.

CENTRAL FRAME PARTITION

4— Frame perimeter in painted extruded aluminium.

58 COVERING PROFILES AND RUNNERS

Extruded aluminium covered with melamine facing or painted, with dust-proof seals.

FRONT EDGING
Anodised extruded aluminium, lacquered in the “Molteni Range” colours or faced with sliced Oak or Eucalyptus.

DOORS

MELAMINE (START - TWIN - “A FILO” - BLADE - GRIP - DEEP)

Wooden particleboard panel faced with melamine. Cushioned hinges and sliding system. Handles in various materials and finishes.

MATT OR GLOSSY LACQUERED IN THE COLOURS (START - “A FILO” - BLADE - GRIP - DEEP - NICHE - SWING)
Wooden particleboard panel faced with melamine, painted in the colours of the “Molteni Range”. Cushioned hinges and sliding system.
Handles in various materials and finishes. For the SWING model, the panel is trimmed using a painted aluminium extrusion.

WOOD (START - TWIN - “A FILO” - BLADE - GRIP - DEEP - NICHE)

Wooden particleboard panel faced with sliced Oak or Eucalyptus. Handles in various materials and finishes.

GLASS HINGED DOOR (“A FILO”)

Wooden particleboard panel faced with melamine, with a 5-mm-thick glass panel or mirror applied, painted in the colours of the “Molteni
Range”. Outer frame profile of anodised extruded aluminium. Cushioned hinges.

GLASS SLIDING DOOR (“A FILO”)

Frame in anodised extruded aluminium with mounted mirror or 5 mm glass, painted in “Molteni Range” colours.
Sliding system with shock absorbers.

GLASS / SISTEMA 7 glass DOORS

Extruded aluminium frame with 4mm thick glass, available in various finishes. Hinges with 180° opening, for hinged doors.
Patented folding mechanism for SISTEMA 7.

WINDOW doors
Frame in painted extruded aluminium with 5 mm glass available in different finishes. Recessed soft close hinges.

SKIN doors
Frame in painted extruded aluminium with honeycomb panel inserted and covered in eco-leather. Recessed soft close hinges.

SISTEMA 7 wood DOORS

Honeycomb panel painted in “Molteni Range” colours or covered with Oak or Eucalyptus wood veneer.
Handle in painted extruded aluminium. Hinges with 180° opening for hinged doors.
Patented folding mechanism.

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS TECHNICAL INFORMATION
MASTER—
VINCENT INTERNAL FITTINGS
VAN DUYSEN
2015 PULL-OUT SHIRT HOLDER
Painted parts made using a phenolic laminated panel. Front tray made of woodchip board faced with melamine. Bottom clad in eco-leather
DRAWER UNIT STRUCTURE FOR FRAME SIDES
Chipboard panel with melamine facing, painted in specific Molteni finish.
INNER SHELVES, DRAWER OR TRAY FRONT, MOVABLE TRAYS SET AND GRID WITH SHIRT AND SWEATER HOLDERS
Wooden particleboard panel faced with melamine.
INNER SHELVES WITH FRONT PROFILE
Chipboard panel covered with melamine facing, front profile in painted extruded aluminium.
INNER SHELVES IN ECO SKIN
Chipboard panel covered with melamine facing, front profile in painted extruded aluminium and upper covering in eco-leather.
CLOTHES RODS
Anodised aluminium rod. Tube support of chrome-plated plastic material.
GLASS FRONT PANEL AND GLASS SHELVES
In painted or extruded aluminium. 4-mm-thick tempered glass.
FINE GRAIN FRONT
Chipboard panel covered with cylinder etched coextruded sheet of ABS-PMMA, painted in specific Molteni finish. Perimeter profile in painted
extruded aluminium.

5— DRAWER AND TRAY INNER SIDES

Wooden particleboard panel faced with melamine.
58 DRAWER AND TRAY INNER BOTTOM
Wooden particleboard panel faced with melamine.
SHOE RACK AND TROUSER RACK PROFILES
In anodised or painted aluminium extrusion.
PULL-OUT MIRROR
Metal frame with mirror 4 mm th.
HANDLES AND VARIOUS ACCESSORIES
In various materials and finishes.
BASE, TOP AND SHELVES IN WOOD (ISLAND WITH GLASS DOORS)
Chipboard panel covered with wood veneer in Eucalyptus or Oak.
IONISER
See technical sheet enclosed with the product.

1
8
10

9
3 21
11 6 19
17
18
4
5
14
16

13 20
15
12

2
7

1 Top 17 Side glass panel

2 Base 18 Central glass partition
3 Partition 19 Central frame partition
4 Side 20 Drawer unit structure
5 Extension profile 21 Glass back panel
6 Back
7 Covering profile or bottom runner
8 Covering profile or top runner
9 Shelf th. 30
10 Clothes rails
11 Shoe rack shelf DRAWER INTERIOR
12 Drawers DRAWER BOTTOM
DATASHEET 13 Trouser holder - trinket trays
SIDES
REGISTERED 14 Grid with shirt and sweater holders
DESIGN 15 Pull-out mirror
IX.2020 16 Pull-out shirt holder

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS MODULARITY
MASTER—
VINCENT
VAN DUYSEN Modularity - Structure
2015 The widths 492 - 656 - 820 - 984 - 1312 - 464 (term. element) mm (19 3/8” - 25 7/8” -
32 1/4” - 38 3/4” - 51 5/8” - 18 1/4”) include the left side panel. The total width of the composition will include the final panel of th. 30 mm (1 1/8”).
Heights: tot. H 2343 (92 1/4”), door 2313 (91”), int.2253 (873/4”), sliding or flush sl. door inter. 2163 (85 1/8”)
tot. H 2439 (96”), door 2409 (94 7/8”), int. 2349 (92 1/2”), sliding or flush sl. door inter. 2259 (88 7/8”)
tot. H 2631 (103 5/8”), door 2601 (102 3/8”), int. 2541 (100”), sliding or flush sl. door inter. 2451 (96 1/2”)
tot. H 2919 (114 7/8”), door 2889 (113 3/8”), interior 2829 (111 3/8”), only hinged
Assembly instructions
For the assembling of a sliding and a flush sliding door wardrobe a minimum space of 6 cm (2 3/8”) is required considering the minimum height of the compartment.
Assembly of the corner element (for wardrobe with doors) requires a minimum extra height of 6 cm (2 3/8”).
Assembly of a wardrobe in an alcove requires a minimum extra side space of 4 cm (1 5/8”).
For hinged door wardrobes with lighting systems and/or SISTEMA 7 doors this product requires a minimum height of 5 cm (2”).

462 30 1 1/8” 626 30 1 1/8” 790 30 1 1/8” 954 30 1 1/8” 1282 30 1 1/8” 434 30 1 1/8”
18 1/4” 24 5/8” 31 1/8” 37 1/2” 50 1/2” 17 1/8”

595/ 420
435 16 1/4”
23 3/8”/ linear element linear element linear element linear element linear element terminal
17 1/8” element

6—
58
1670 78 5/8” 2162 85 1/8”
820 32 1/4” 820 32 1/4” 984 38 3/4” 656 25 7/8” 492 19 3/8”
984 38 3/4” 656 25 7/8” 820 32 1/4” 820 32 1/4” 492 19 3/8”

1834 72 1/4” 2326 91 5/8”

984 38 3/4” 820 32 1/4” 1312 51 5/8” 984 38 3/4”

1312 51 5/8” 492 19 3/8” 820 32 1/4” 820 32 1/4” 656 25 7/8”

2490 98”
1998 78 5/8”
984 38 3/4” 984 38 3/4” 492 19 3/8”
984 38 3/4” 984 38 3/4”
1312 51 5/8” 656 25 7/8” 492 19 3/8”
1312 51 5/8” 656 25 7/8”
820 32 1/4” 820 32 1/4” 820 32 1/4”

2654 104 1/2”

1312 51 5/8” 1312 51 5/8”
984 38 3/4” 984 38 3/4” 656 25 7/8”
492 19 3/8” 820 32 1/4” 820 32 1/4” 492 19 3/8”

2818 111”
656 25 7/8” 984 38 3/4” 492 19 3/8” 656 25 7/8”
984 38 3/4” 820 32 1/4” 984 38 3/4”

2982 117 3/8”

984 38 3/4” 984 38 3/4” 984 38 3/4”

3146 123 7/8”

1312 51 5/8” 1312 51 5/8” 492 19 3/8”
820 32 1/4” 820 32 1/4” 820 32 1/4” 656 25 7/8”

3310 130 3/8”

820 32 1/4” 820 32 1/4” 820 32 1/4” 820 32 1/4”
656 25 7/8” 1312 51 5/8” 1312 51 5/8”

3474 136 3/4”

984 38 3/4” 492 19 3/8” 984 38 3/4” 984 38 3/4”
1312 51 5/8” 820 32 1/4” 1312 51 5/8”

3638 143 1/4”

984 38 3/4” 984 38 3/4” 984 38 3/4” 656 25 7/8”
984 38 3/4” 820 32 1/4” 820 32 1/4” 984 38 3/4”
1312 51 5/8” 1312 51 5/8” 984 38 3/4”

3802 149 3/4”

1312 51 5/8” 984 38 3/4” 984 38 3/4” 492 19 3/8”
656 25 7/8” 1312 51 5/8” 1312 51 5/8” 492 19 3/8”
DATASHEET

REGISTERED 3966 156 1/8”

DESIGN
1312 51 5/8” 1312 51 5/8” 1312 51 5/8”
IX.2020 984 38 3/4” 984 38 3/4” 984 38 3/4” 984 38 3/4”

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS DOORS
MASTER—
VINCENT START-HOLLOW-TWIN QUICK-“A FILO”-BAMBOO GRIP hinged doors
VAN DUYSEN hinged doors hinged doors applicable only on structures
2015 applicable only on structures applicable only on structures with wood sides
with wood sides with wood sides

In the pairs of TWIN hinged

doors W 815, 979 and 1307,
are availables 2 handles
or handle only on right door.

total height total height

above floor above floor
1190 46 7/8” 1080 42 1/2”

The pairs of hinged doors START

and “A FILO” always have a handle
mounted on the right door.

NICHE doors WINDOW - SKIN door GLASS-SWING-SISTEMA 7 doors, th35

applicable only on structures applicable on all types applicable on all types
with wood sides of structures of structures

7— In the pairs of hinged doors

W 815, 979 and 1307, are
The hinged doors WINDOW GLASS-SWING doors
and SKIN are made with are made with
58 availables 2 handles recessed hinges fixed to base 180° hinges
or handle only on right and top, and have a thickness built into the side
door. of 30 mm (a Molteni exclusive)

total height handle total height

above floor height above floor
950 890
35” 1080 42 1/2”
37 3/8”

180° 180°
Sliding doors

maniglia
ad incasso

It is possible to make sliding door wardrobes

with doors of the following types: Detail of side panel
- QUICK with extension profile with BLADE door
- START
- “A FILO”
- GRIP
- BLADE

It is possible to make the external 7 1/4”

sliding door with two handles if 28
using the QUICK, “A FILO” or 1 1/8”
25 1”
BLADE door (full-height handle)
4 1/8”
and applying the surcharge 5 1/4” 13 5 1/4” 21,5
17,5
1/2” 5/8” 7/8”
30
1 1/8”
Flush sliding doors

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS DOORS
MASTER—
VINCENT
VAN DUYSEN
2015
155° opening (only for compartments with wooden sides)

On QUICK - START - TWIN - “A FILO” - BAMBOO - HOLLOW - GRIP - NICHE doors

it is also possible to use 155° opening hinges, with an extra charge per individual
door. In this case, it is necessary to take special care in inserting internal drawer units, trinket
trays and devices.

It is also necessary to comply with the diagrams provided here.

155° 155°

25 1” 25 1”

YES QUICK - “A FILO” - BAMBOO

HOLLOW - NICHE doors
NO START - TWIN - GRIP doors

8—
58

155° 155° 155°

30
25 1” 25 1” 1 1/8” 25 1”

YES QUICK - “A FILO” - BAMBOO

HOLLOW - NICHE doors
YES START - TWIN - GRIP doors
YES WINDOW - SKIN doors

NOT with GLASS doors

Hinged doors with key lock

For the hinged doors specified, a key lock can be fitted to order. There is a
additional cost for one or two doors.
It can even be fitted on a terminal element or a corner element (in compliance with the
handle installation rules).
For doors with a lock, the internal drawer units must be suspended.
Installation of only the lock can be requested, without a handle, always considering the
price of the START doors and the additional cost of the lock.

START door START door START door QUICK door HOLLOW door
handle type “M” handle type “E” handle type “CV” “A FILO” door

65 2 1/2” 65 2 1/2” 65 2 1/2” 65 2 1/2” 65 2 1/2”

1149 45 1/4”

1149 45 1/4”

1149 45 1/4”

1149 45 1/4”

1149 45 1/4”

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SISTEMA 7
MASTER—
VINCENT
VAN DUYSEN
2015 A new folding opening system with a patented mechanism which makes it possible, in the SISTEMA 7 can be applied to all Gliss Master structures with wood, glass or frame sides,
180° version, to open the unit entirely. but cannot be used with other Gliss Master doors.
The mechanism, light and silent, does not require tracks and therefore allows use of the The 90° and 180° folding door is applied to modules with width 790 and 954, while the
full height. hinged door is applied to single modules 380/462/626, double modules 790/954/1282
and the corner unit.
The hinged doors enable 180° opening and wardrobe width made to order; the special The 380 mm unit is specific for SISTEMA 7 with hinged door.
hinge pins are anchored to the base and the cover.
Anyhow, SISTEMA 7 hinge doors can be used. Reductions
90° and 180° folding openings can be reduced in height only.
The 90° opening, on the other hand, is an intermediate solution that can solve design 180° hinged openings can be reduced in height and in width up to 405 mm.
problems while maintaining a uniform design.
Notes
The thickness of the wood and glass door are 35 mm. The side panels follow the same logic as Gliss Master (see drawing •).

* = 180° Hinged (necessary for 180° opening and for wardrobes

with width made to order)

90° Folding opening 180° Folding opening

9— 380-15”
790/954 790/954 790/954
58 31 1/8” / 37 1/2” 31 1/8” / 37 1/2” 462-18 1/4” 31 1/8” / 37 1/2”

If the 90° folding door is on

an end unit with external door,
90°sx-left 90°dx-right provide filler: * 180°sx-left
180°sx
* 180°sx-left
50 mm (790 compartment)
120 mm (954 compartment)

Mixed 90°/ 180° Folding openings

90°sx-left 180°sx-left 180°dx-right * 180°dx-right 180°sx-left

180° Corner opening

* 180°sx-left 180°sx-left

1101 462 462

43 3/8” 18 1/4” 18 1/4”

*
43 3/8”
1101
18 1/4”

* 180°sx-left 180°dx-right
*
462

*
18 1/4”
462

180°sx-left 180°dx-right
*
wooden glass
side panels side panels
DATASHEET (•) (•)

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS CORNER ELEMENT
MASTER—
VINCENT Corner element D 595 - open or with GLASS/SWING/SISTEMA 7 doors Reductions
VAN DUYSEN The corner element can be reduced in height, width and depth.
2015
The corner element is supplied complete with base, top and backs (melamine faced In width, the reduction can be carried out either on one side only or on both sides, up to
structure, piqué or fine grain). Between the corner element and the adjacent modules, the a minimum width of 1101 mm.
central partitions in melamine, frame or glass must be inserted.
The corner element can also receive a side panel to close the composition. Reduction in depth can be done on one or on two sides, up to a minimum of 435 mm.
Compartments adjacent to the closed corner element can be open or closed with If only one side is reduced, that will be the side with the longest shelves (*).
GLASS, SWING or SISTEMA 7 (folding and hinged) doors.

Notes *
The shelf is not included in the price of the corner element.
Shelves and lids can be fitted with LED lighting bars, as indicated in the drawing below.

GLASS and SWING door

A
1081
1262

723
10— 543
melamine back
58

180°
or fine grain back
det. A

Solutions with SISTEMA 7

(only for corner unit 1101x1101)
1101
1282 180° Folding 180° Hinged

1101 462 462 1101

595

1282
1101
*
1101

1101
lighting bar
position
462

595

*
462

The corner element can be fitted with shelves and clothes rails, or with
this solution of drawer units that have a central partition H 1158 where
the desired drawer unit can be inserted. The drawer unit can be with
fronts W 420 or 584.

No type of drawer unit can be

inserted with frame or glass
sides

1158

30
462/626 195/31

only open or with

GLASS, SWING and SISTEMA 7 doors
DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS STRUCTURE
MASTER—
VINCENT
VAN DUYSEN
2015
Structure for walk-in closet

In version A, the structure (base, lid, central partitions, back and side panels) is in
melamine, in the same finish as the structure.
The back piece can also be provided in fine grain finish or in glass.
The side panels are always provided without extension profile (see detail).
In version B, the central partitions and sides are made with an aluminium frame with
pewter colour or bronze finish, with or without glass.
Base, lid and back piece are in melamine, in the same finish as the structure.
The back piece can also be provided in fine grain or glass finish.
Horizontal tags on the base and lid are made in a pewter colour or bronze finish like the
side frames.
In version C, given the presence of frame sides in pewter colour finish, the central and side
partitions in melamine are also made with from tags in pewter colour or bronze.

version A - Structure with wooden sides (melamine in the same colour as the structure) * Excluding module
with glass back
11— 30 30 30
1101
58 1282 462-626-790-954-1282 *

595
435

1101
1282
corner
element
In this solution the horizontal tags
are always made in the same finish
30 as the structure

version B - Structure with frame or glass sides (H max 2631)

central partition side panel
30 30 30
1101
1282 462-626-790-954-1282 *

The side panel

is always glass

1101
1282

corner
element
In this solution, the horizontal tags Compartments with frame or glass * Excluding module
are made in pewter colour or bronze sides must always include a shelf with glass back
finish, like the sides with frame or or a drawer unit
30
glass

version C - Structure with mixed sides (H max 2631)

A A

In this solution, the horizontal

tags are made in pewter colour
or bronze finish, like the sides
with frame or glass. Melamine
central partitions and sides are
made with front tag in pewter
colour or bronze pewter colour
or bronze
DATASHEET det. A
REGISTERED A
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS STRUCTURE
MASTER—
VINCENT
VAN DUYSEN
2015 Linear modules Side panels

Linear modules are made up of a base and lid always made in melamine in the same finish These are available in melamine, in the same finishes as the structure, frame and glass.
as the structure. The melamine version can be reduced in height and depth.
The back is available in the three versions indicated below. The side exterior is available also in matt lacquer, glossy lacquer or wood finish (vertical grain).
A1 and A2 can be reduced in height, width and depth if closed by sides and doors that are The standard finish on side panels is an extension profile in the coloured matt lacquer,
compatible with the requested reductions. pewter colour, bronze (to be specified in the Order).
A3 can be reduced only in height. The extension profiles for glossy lacquer or wood side panels always match the side
panels of the same finish.
Central partitions The frame and glass versions can be reduced only in height.
These are available in melamine, in the same finishes as the structure, frame and glass. Compartments with frame or glass sides must always include a shelf or a drawer unit.
The melamine version can be reduced in height and depth.
The frame and glass versions can be reduced only in height.
Compartments with frame or glass sides must always include a shelf or a drawer unit.

A1 - Melamine back A2 - Fine grain back A3 - Glass back

(only hinged GLASS, WINDOW
closet and SISTEMA 7 glass)

12—
58
2343 - 2439 - 2631 - 2919

2343 - 2439 - 2631 - 2919

2343 - 2439 - 2631

595/435 595/435 595

462-626-790 462-626-790 462-626-790

954-1282 954-1282 954
A1 A2 A3
Base, lid and back made Base and lid made in melamine finish Base and lid made in melamine finish
in melamine finish matching the structure. matching the structure. matching the structure.
The back is available also in piqué Back with fine grain finish It is possible to produce single finished
modules W 790/954 with lateral pieces in
glass by using the glass lids

Central partitions, th 30 Side panels, th 30

Warning:
frame sides and glass sides will only have holes at the position of the shelves. Complete hole
series at regular intervals 96 mm will involve an extra charge.

Melamine Melamine with Frame Glass Melamine Melamine with Glass

pewter colour or (only hinged (only hinged pewter colour or (only hinged
bronze profile for GLASS, SWING, GLASS, SWING, bronze profile for GLASS, SWING,
matching with WINDOW, SKIN, WINDOW, SKIN, matching with WINDOW, SKIN,
walk-in closet with walk-in closet and walk-in closet and walk-in closet with walk-in closet and
frame or glass sides SISTEMA 7) SISTEMA 7) frame or glass sides SISTEMA 7)
A
2343 - 2439 - 2631 - 2919

2343 - 2439 - 2631 - 2919

2283 - 2379 - 2571

2343 - 2439 - 2631

2343 - 2439 - 2631

2343 - 2439 - 2631

2343 - 2439 - 2631

2343 - 2439 - 2631

595/435 595/435 595 595 595/435 595/435 595

melamine pewter pewter pewter

finish colour/ colour/ colour/
bronze bronze bronze
structure finish finish finish
DATASHEET

REGISTERED det. A
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS
MASTER—
TWO-SIDED CORNER WARDROBE COMPOSITIONS WITH OUTWARD SWING DOORS
VINCENT
VAN DUYSEN
2015 Many of the solutions described below can be created with Gliss Master.
These layouts can be installed either with or without the external corner module.

** For this side, please consider the wooden side panel surcharge.

Solution A: Solution B:
Outward swing doors Outward swing door + Walk-in Closet
(NO glass back panels) (NO glass back panels)

Walk-in Closet

wooden side
wooden side
panel
panel wooden side
13— wooden side
panel ** panel **
58 rear finishing panel rear finishing panel
rear finishing panel

rear finishing panel

Solution C: Solution D:
Outward swing door + Inward swing door Outward swing door + Inward swing door
(example with glass back panels) (example with rear finishing panel)

glass back panel rear finishing panel

wooden side wooden side

wooden side panel wooden side panel
panel ** panel **
* *
rear finishing panel

rear finishing panel

* This compartment can be closed with a QUICK, “A FILO” and NICHE door (vertical and horizontal).
For glass backs, drawer units are mandatory for compartments with frame or glass sides.
For melamine structure, piqué or fine grain backs, use drawer units that are narrower than the module.

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS EXTERNAL CORNER UNIT
MASTER—
VINCENT
VAN DUYSEN
2015
External corner unit
Reductions
- It can be either open or fitted with doors. The external corner unit can be reduced in height, width and depth.
- It is always secured to the melamne central partitions of the adjacent wardrobes.
- The front profile can have a matt lacquered, pewter colour and bronze finish. * For this side, please consider the wooden central partition surcharge.
- Height, width and depth can be reduced.
- The external corner unit can be closed in all hinged door models.

5 59
59 5

14—
58

Solution A: Solution C:
with Doors Doors and Walk-in Closet

* *

NO NO
glass back panels glass back panels

Solution B: Solution D:
Walk-in Closet Doors andWalk-in Closet

* *

NO NO
glass back panels glass back panels

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS WARDROBE REDUCTIONS
MASTER—
VINCENT
VAN DUYSEN Structure reductions
2015
Type of reduction height width depth

Linear modules D 595 mm melamine back or fine grain back per millimetre per millimetre min -20 mm max -256 wardrobe / flush sliding ward. max -160 mm

Linear modules D 595 mm glass back per millimetre no reductions no reductions

Linear elements D 435 mm per millimetre per millimetre min -20 mm max -96 mm

Corner element for wardrobe with doors per millimetre no reductions no reductions

Corner element open or for GLASS/SWING doors 1 side up to 1101 x 1282 1 side up to mm 435
per millimetre
2 sides up to 1101 x 1101 2 sides up to mm 435

Terminal element per millimetre no reductions no reductions

Wooden central partition or side panel per millimetre reductions depend on linear modules
Frame or glass side panel or central partition per millimetre no reductions
External corner unit per millimetre up to mm 435 up to mm 435

The retailer should remember to verify the stability of wardrobes having a depth inferior to 595 mm and arrange to have anti-tilt devices mounted if necessary.

Door reductions
Type of reduction height width
15— Wooden hinged doors (QUICK - START - TWIN - “A FILO”- HOLLOW - GRIP - NICHE) per millimetre per millimetre

58 “A FILO” glass hinged doors per millimetre per millimetre

Wooden sliding doors (QUICK - START - “A FILO” - BLADE - GRIP) per millimetre ONLY doors W 979 and 1307 mm - reducible down to W 815 mm
“A FILO” glass sliding doors per millimetre no reductions
Wooden flush sliding doors (QUICK - START - TWIN - “A FILO” - HOLLOW - GRIP)
per millimetre no reductions
Flush sliding doors W 1471 mm cannot be reduced.
“A FILO” glass flush sliding doors per millimetre no reductions

SKIN doors no reductions no reductions

WINDOW / GLASS / SWING doors per millimetre reducible down to W 405 mm

SISTEMA 7 wood hinged door per millimetre reducible down to W 405 mm
SISTEMA 7 wood folding door per millimetre no reductions
SISTEMA 7 glass hinged door per millimetre reducible down to W 405 mm
SISTEMA 7 glass folding door per millimetre no reductions
BAMBOO hinged doors per millimetre at -15 mm intervals

Reductions of internal fittings

Type of reduction height width depth

Wood shelves per millimetre reductions depend on linear modules

Shelves with pewter colour profile per millimetre reductions depend on linear modules
Eco Skin shelves per millimetre reductions depend on linear modules
Glass shelves per millimetre reductions depend on linear modules
Clothes rails per millimetre
Central divider pieces 32 mm intervals reductions depend on linear modules
Internal drawers / trinket trays, trouser holders and
pull-out trays / grid with shirt and sweater holders / no reductions no reductions no reductions
shoe rack shelves /pull-out shirt holders / lighting
shelves / islands / movable trays

* If the corner shelves are reduced on two sides, consider double the cost.
Lighting bars can be reduced with a surcharge included in the fee for cutting the shelf.

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SPECIAL PROCESSING - INSPECTIONS
MASTER—
VINCENT
VAN DUYSEN
2015
Inspection on lid
with removable panel
for 626/790/954/1282
compartments (only on
hinged door compartment)

LED lights can also be

fitted on the top.
Only for compartments
with melamine sides.
Removable 10 th. panel
melamine finished structure 100
100

hole 595

150

PAISPCO1

16—
58 Inspection on base
with removable panel
for 626/790/954/1282
compartments (only on
hinged door compartment)

Only for compartments

with melamine sides. com
Removable 10 th. panel dim partm
ens en
ion t
melamine finished structure

100
100

hole 595

150

PAISPBA1

Inspection on side panel

with removable panel
min. 261
Removable 10 th. panel
melamine finished structure.
Only one inspection possible
per side panel. max. 888

min. min.
140 140

min. 208

PAISPSP1

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS REMOVABLE BACK PANEL
MASTER—
VINCENT
VAN DUYSEN
2015
The removable back is made by dividing
the back panel’s structure, and adding two fixed shelves
or 1 if starting from the base or top

same width
as the
compartment

Type 1
Type 1
- Back cut
17— - Additional back panel at fixed price
58 - Removable panel H max 1698 mm
W 462/626
W 790/954
W 1282

Type 2

- Back cut
- Removable panel H max 1734 mm
W 462/626
W 790/954
W 1282

Type 2

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SPECIAL PROCESSING - SHAPING
MASTER—
VINCENT
VAN DUYSEN
2015 min. 339
Only on hinged door compartment

Costs to consider:
320 - Back cut
- Lid cut
- Fixed shelf with surcharge for cut
(see page 106 of the price list for solid wood shelves)
- Back, fixed price

max. 461
Costs to consider:
- Back cut
- Base/lid/shelf in solid wood
2 cuts per shaped piece
- 2 additional panels
18— - Possible cut in side

58
min. 339

Notes
- Shaping in both height and width cannot be done on the same compartment.
- Confirmation to the customer of the feasibility of shaping will only be given after
checking with the Molteni&C Technical Office.

CUSTOM CUTS FOR ATTICS

Doors with slanting cut (only for wardrobes with solid wood sides) Standard or made to size doors (only for wardrobes with solid wood sides)
When preparing the order, indicate heights H1 and H2, as well as the width L, as shown Double compartments with hinged doors can be used for this solution.
in the example.
The price for the slanting cut for each door is the same as cutting for a hinged door, as
shown in the doors pages.
In this case a single module must be used with a QUICK, START, TWIN, “A FILO”,
HOLLOW and GRIP hinged door, with the melamine facade and matt lacquered finishes,
hinged on the higher side.
The structures can be standard or made to size.

H1

H2

L
DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS GLASS TOP FOR WARDROBES
MASTER—
VINCENT FINISHED WITH ONLY ONE
VAN DUYSEN
2015
COMPARTMENT W 790/954
To use only with: Glass finish Profile finish
- single linear module W 790 / W 954 transparent glass pewter colour
(no modular arrangement is possible) transparent stopsol glass bronze
- only with glass lateral pieces and glass back panel stopsol glass
- clothes rod cannot be mounted on the lid
- cannot be used with SISTEMA 7 doors

Increase valid for depths 595 - 23 3/8”

19—
58

W 790 - 31 1/8” W 954 - 37 1/2”

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS QUICK door th 25
MASTER— Notes
VINCENT Sliding doors and flush sliding doors are not available in H 2889.
VAN DUYSEN Door with full height handle included in the door thickness.
2015 The door is available only in the tatami melamine and chestnut versions with matching
With QUICK fronts in tatami melamine finish, it is advisable to make the
powder coated handle, as per the table.
structure and side panels in the same finish as the doors.
All the hinged doors have cushion-closing hinges. Side extension profiles are made in the same finish as the handle.
The sliding door have a shock absorber mechanism which allows them to open and close softly.
Hinges with 155° opening can be used and a key lock can be installed on
hinged doors.

QUICK door
ivory tatami melamine
grey tatami melamine
light chestnut melamine
dark chestnut melamine

FINISHES TO MATCH THE QUICK DOOR

PROFILE HANDLE/ EXTENSION PROFILE

DOOR PANEL
DOOR EXTENSION SIDE PANEL
20—
Ivory Tatami RAL7032 RAL7032
58
Grey Tatami RAL7039 RAL7039

Light Chestnut Bronze epoxy finish Bronze epoxy finish

Dark Chestnut Pewter colour epoxy finish Pewter colour epoxy finish

25 1”

hinged doors

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

flush sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS START door th 25
MASTER—
VINCENT
VAN DUYSEN
2015
Door with handles mounted on the front.
Notes
All the hinged doors have cushion-closing hinges. Sliding doors and flush sliding doors are not available in H 2889.
The sliding door have a shock absorber mechanism which allows them to open and close softly.
Hinges with 155° opening can be used and a key lock can be installed on With the fronts in melamine front finish and glaze, the exterior of the side
hinged doors. panel can be in matt lacquer or melamine finish like an internal structure.
To match the glaze finish door, we advise the side exterior finish in dolomite
Handles grey matt lacquer with handle and extension profiles in pewter colour or
Type “E” bronze.
Type “M”
Type “CV” ONLY for hinged opening

START door Type “E” Type “M” Type “CV”

standard surcharge € 41 each standard ONLY for hinged opening
melamine cartapaglia Finish Finish
tatami melamine Pewter colour pewter colour pewter colour
melamine silk structure bronze bronze
chestnut melamine with front insert:
matt lacquer colours matt lacquer colours
glaze woods

2 1/4”
57
glossy lacquer colours
vertical grain wood
21— Structure and front
insert:
58 bronze

hole 286
11 1/4”
pewter colour

hole 232
9 1/8”
45 1/4”
1150

hole 232
9 1/8”
hole 286
11 1/4”
15 3/4”
400

hole 286
11 1/4”

25 1”
2 1/4”
57

finishes

melamine matt lacquer vertical grain glossy lacquer glaze

hinged doors front colours wood colours

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

width 1471 (57 7/8”)

flush sliding doors

width 815 (32 1/8”)

DATASHEET width 979 (38 1/2”)

width 1307 (51 1/2”)

REGISTERED
DESIGN width 1471 (57 7/8”)

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS TWIN door th 25
MASTER—
VINCENT
VAN DUYSEN Door with pewter colour or bronze finish handle mounted on the front. Notes
2015 Flush sliding doors are not available in H 2889.
All the hinged doors have cushion-closing hinges. The sliding door have a shock absorber
mechanism which allows them to open and close softly. With the fronts in melamine front finish and glaze, the exterior of the side
Hinges with 155° opening can be used and a key lock can be installed on panel can be in matt lacquer or melamine finish like an internal structure.
hinged doors.
To match the glaze finish door, we advise the side exterior finish in dolomite
grey matt lacquer with handle and extension profiles in pewter colour or
bronze.

TWIN door Handle finish

pewter colour
melamine cartapaglia bronze
melamine tatami
melamine silk
chestnut melamine
matt lacquer colours
glaze
glossy lacquer colours
vertical grain wood

22—
58
hole 192 - 7 1/2”
240 - 9 1/2”

25 1”

finishes

melamine matt lacquer vertical grain glossy lacquer glaze

front colours wood colours
hinged doors

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element
flush sliding doors
width 815 (32 1/8”)
width 979 (38 1/2”)

width 1307 (51 1/2”)

width 1471 (57 7/8”)

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS “A FILO” door th 25
MASTER—
VINCENT
VAN DUYSEN Door with full-height handle included in the thickness of the door. Notes
2015
The door is available in the versions wood and glass. Sliding doors and flush sliding doors are not available in H 2889.
Glass hinged doors are not available in H 2889.
All the hinged doors have cushion-closing hinges. Flush sliding glass doors cannot be used in compositions with 3 doors.
The sliding door have a shock absorber mechanism which allows them to open and close softly.
Hinges with 155° opening can be used and a key lock can be installed on With the fronts in melamine cartapaglia, silk and glaze, the exterior of the
hinged doors. side panel can be in matt lacquer or melamine finish like an internal
structure.

To match the glaze finish door, we advise the side exterior finish in dolomite
grey matt lacquer with “a filo” handle (full height) and extension profiles in
pewter colour or bronze.

“A FILO” wooden door “A FILO” glass door

melamine cartapaglia Glass:
melamine silk coloured
matt lacquer colours etched coloured
glossy lacquer colours mirror
vertical grain wood
glaze Profile and “a filo” handle:
pewter colour
bronze
23—
58

pewter colour
bronze
matt lacquer colours
glossy lacquer colours

25 1”

finishes
melamine matt lacquer vertical grain glossy lacquer colouerd glass/ glaze
front colours wood colours etched coloured
* excluding tatami glass/ mirror
hinged doors and chestnut

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

width 1471 (57 7/8”)

flush sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

width 1471 (57 7/8”)

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS BAMBOO door th 25
MASTER—
VINCENT
Door covered in quilted Eco Skin in the colours of the Molteni range, characterized by With fronts in Eco Skin finish, the outside of the side panel can be made with
VAN DUYSEN
2015 a full-height handle recessed in the thickness of the door and by a perimeter profile that matt lacquer finish or in melamine in the same finish as the inside structure.
defines its contour.

All the hinged doors have cushion-closing hinges.

Hinges with 155° opening can be used.

BAMBOO door
Handle and perimeter profiles:
pewter colour
bronze

Panels covered in Eco Skin

in the colours:
grey
mink
hemp
ivory
dark brown
24—
58

handle and perimeter profiles:

pewter colour
bronze

panels covered in Eco Skin

in the colours:
grey
mink
hemp
ivory
dark brown

25 1”

finishes

Eco Skin
hinged doors

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS HOLLOW door th 25
MASTER—
VINCENT Notes
VAN DUYSEN Door characterized by the handle recessed in the thickness of the door.
Flush sliding doors are not available in H 2889.
2015
All the hinged doors have cushion-closing hinges.
The sliding door have a shock absorber mechanism which allows them to open and close softly. With the fronts in melamine front finish and glaze, the exterior of the side
Hinges with 155° opening can be used and a key lock can be installed on panel can be in matt lacquer or melamine finish like an internal structure.
hinged doors (see page 41).
To match the glaze finish door, we advise the side exterior finish in dolomite
grey matt lacquer and the extension profile in the same finish as the handle
(pewter colour or bronze).

HOLLOW door
Panel:
melamine cartapaglia
melamine tatami
melamine silk
chestnut melamine
matt lacquer colours
glaze
glossy lacquer colours
25— vertical grain wood

58 Handle:
pewter colour
bronze

panel

handle

25 1”

finishes

melamine matt lacquer glaze vertical grain glossy lacquer

front colours wood colours
hinged doors

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

flush sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS BLADE sliding door th 25
MASTER—
VINCENT
VAN DUYSEN
Door with full-height handle. Notes
2015
BLADE doors are not available with H 2889.
The sliding system automatically aligns the door as it opens and closes.
With the fronts in melamine front finish, the exterior of the side panel can be
in matt lacquer or melamine finish like an internal structure.

BLADE sliding door

melamine cartapaglia
melamine tatami
melamine silk
chestnut melamine
matt lacquer colours
glossy lacquer colours
vertical grain wood

26—
58

pewter colour
bronze
matt lacquer colours
glossy lacquer colours

25 1”
43
1 3/4”

4,5
1/8”

finishes

melamine matt lacquer vertical grain glossy lacquer

front colours wood colours
sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

width 1471 (57 7/8”)

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS GRIP door th 25 DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
Door with a handle applied laterally on the edge of the door. Notes
2015
Sliding doors and flush sliding doors are not available in H 2889.
All the hinged doors have cushion-closing hinges. In the pair of hinged doors, the handle is mounted on both doors in the pair.
The sliding door have a shock absorber mechanism which allows them to open and close softly.
Hinges with 155° opening can be used on hinged doors. With the fronts in melamine front finish, the exterior of the side panel can be
in matt lacquer or melamine finish like an internal structure.

Handles finishes
pewter colour
bronze
pewter colour covered in Eco Skin in the colours (with surcharge per handle)
bronze covered in Eco Skin in the colours (with surcharge per handle)

GRIP door
melamine cartapaglia
melamine tatami
melamine silk
chestnut melamine
matt lacquer colours
27— glossy lacquer colours
vertical grain wood
58

25 1”
49
1 7/8”

finishes

melamine matt lacquer vertical grain glossy lacquer

hinged doors front colours wood colours

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

width 1471 (57 7/8”)

flush sliding doors

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

DATASHEET
width 1471 (57 7/8”)
REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS NICHE door th 25 DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
2015 Door with recessed handle. Handles finishes
pewter colour
All the hinged doors have cushion-closing hinges. bronze

Hinges with 155° opening can be used on hinged doors.

NICHE door
matt lacquer colours
glossy lacquer colours
vertical grain wood

28—
58

950
37 3/8” 890
above 35”
floor

finishes

matt lacquer vertical grain glossy lacquer

colours wood colours
hinged doors

width 487 (19 1/8”)

width 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS NICHE HORIZONTAL door th 25 DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
2015 Door with recessed horizontal handle. Handles finishes
pewter colour
All the hinged doors have cushion-closing hinges. bronze

Hinges with 155° opening can be used on hinged doors.

NICHE horizontal door

matt lacquer colours
glossy lacquer colours

29—
58

15 15
5/8” 5/8”

950
37 3/8”
above
floor

finishes

matt lacquer glossy lacquer

hinged doors colours colours

width 487 (19 1/8”)

width 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS GLASS door, th 35, 180° opening DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
2015
Glass door with 180° opening made with a special soft close hinge inserted in the profile Notes
and completely hidden in the side (exclusively by Molteni). The GLASS doors are available with H 2889 only for widths 487, 815, 979 and for the
A full height handle is designed in the profile. corner unit 1101x1101.
In the pair of hinged doors, the handle is mounted on both doors in the pair.
Integrated lock with coded key
GLASS hinged doors with integrated lock are available, taking into account The GLASS door can also be installed on the open corner module.
a surcharge for single door or pair of doors.
As standard, all lockable doors in a wardrobe will have different coded keys.
On the pair of doors, the lock will always be applied to the right door.
The lock is not applicable to hinged doors of the external corner units.

GLASS door

30—
58
profile:
pewter colour
bronze

glass:
extraclear transparent
transparent stopsol
stopsol
net

35
1 3/8”

hinge side handle side

finishes

transparent transparent stopsol net

180° Hinged glass stopsol glass glass glass

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

corner unit 1101x1101

corner unit 1231x1231

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SWING door, th 35, 180° opening DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
2015
Matt lacquered door with panel and perimeter profiles with a 180° opening made with Notes
a special soft close hinge inserted in the profile and completely hidden in the side SWING doors are not available in H 2889.
(exclusively by Molteni). A full height handle is designed in the profile. In the pair of hinged doors, the handle is mounted on both doors in the pair.

The SWING door can also be installed on the open corner module.

SWING door

31—
58
matt lacquer
colours
profile

matt lacquer
colours
panel

35
1 3/8”

hinge side handle side

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS WINDOW door th 30 DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN Glass hinged door with pewter colour finished aluminium frame and lateral handle. Notes
2015
WINDOW doors are not available in H 2889.
The doors are fitted with recessed hinges inserted in the base and top. In the pair of hinged doors, the handle is mounted on both doors in the pair.

Handle finishes
pewter colour
bronze
pewter colour covered in Eco Skin in the colours (with surcharge per handle)
bronze covered in Eco Skin in the colours (with surcharge per handle)

WINDOW glass door

32—
profile:
58 pewter colour
bronze

glass:
extraclear transparent
transparent stopsol
stopsol

30
1 1/8”
54
2 1/8”
th 4 - 1/8”

finishes

transparent transparent stopsol

hinged doors glass stopsol glass glass

width 487 (19 1/8”)

width 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

door for terminal element

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SKIN hinged door th 30 DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
2015 Notes
Eco Skin covered hinged door with pewter colour and bronze finished aluminium frame
and lateral handle. SKIN doors are not available in H 2889.
In the pair of doors, the handle is mounted on both doors in the pair.
The doors are fitted with recessed hinges inserted in the base and top.
Handle finishes
pewter colour
The door is always divided into 3 equal parts. bronze
pewter colour covered in Eco Skin in the colours (with surcharge per handle)
bronze covered in Eco Skin in the colours (with surcharge per handle)

SKIN hinged door

pewter colour
33— bronze

58 H 2601 - 102 3/8”

H 2409 - 94 7/8”
H 2313 - 91”

pewter colour
bronze 867
34 1/8”
803
panels covered in Eco 31 5/8”
771
Skin in the colours: 30 3/8”
grey
mink
hemp
ivory
867
dark brown 803 34 1/8”
771 31 5/8”
30 3/8”

total height
above floor
1080 42 1/2”

803 867
771 34 1/8”
31 5/8”
30 3/8”

30
1 1/8”
54
2 1/8”

4 1/8”

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SISTEMA 7 wood doors th 35 DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
2015 Doors characterised by increased thickness, made in structural honeycombed panels that Notes
make the surface perfectly flat. Doors are not available with H 2889.
Patented folding system.
All doors are fitted with soft-closing mechanism.

SISTEMA 7 wood doors

matt lacquer colours
glossy lacquer colours
wood

90° / 180° Folding 180° Hinged

34—
58
Handle:
matt lacquer colours
glossy lacquer colours
pewter colour
bronze

35
1 3/8”

sx-left
door
hinged
side

finishes

matt lacquer glossy lacquer vertical grain

180° Folding colours colours wood

width 815 (32 1/8”)

width 979 (38 1/2”)

corner unit 1101x1101

90° Folding

width 815 (32 1/8”)

width 979 (38 1/2”)

180° Hinged

width 405 (16”)

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

corner unit 1101x1101

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SISTEMA 7 glass doors th 35 DESIGN VINCENT VAN DUYSEN
MASTER—
VINCENT
VAN DUYSEN
2015 Glass door with aluminium outer profile, th 35 mm. Notes
Patented folding mechanism. Doors are not available with H 2889.
All doors are equipped with soft-closing system.

Integrated lock with coded key

Hinged doors with 180° opening and 90° / 180° folding doors are available with integrated
lock, considering a surcharge for single door or pair of doors.
As standard, all lockable doors in a wardrobe will have different coded keys.
On the pair of hinged doors, the lock will always be applied to the right door.
On the 90° / 180° folding doors it will be applied to the upright opposite to the handle
(see section).
The lock is not applicable to hinged doors of the external corner units.

SISTEMA 7 glass doors

90° / 180° Folding 180° Hinged

35—
58 profile:
pewter colour
bronze

glass:
transparent extra light glass
transparent stopsol glass
stopsol glass
net glass

35
1 3/8”

sx-left
door

hinge handle profile

profile profile with lock
(on request)

finishes

transparent transparent stopsol net

180° Folding glass stopsol glass glass glass

width 815 (32 1/8”)

width 979 (38 1/2”)

corner unit 1101x1101

90° Folding

width 815 (32 1/8”)

width 979 (38 1/2”)

180° Hinged

width 405 (16”)

width 487 (19 1/8”)

w. 651 (25 5/8”)/608 (23 7/8”)

width 815 (32 1/8”)

width 979 (38 1/2”)

width 1307 (51 1/2”)

corner unit 1101x1101

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SISTEMA 7 doors th 35
MASTER—
VINCENT
VAN DUYSEN
2015 With SISTEMA 7 it is possible to create passageway solutions with doors fastened to Notes
Gliss Master wardrobe structures. Doors are not available with H 2889.
This type of solution requires the insertion of a lid between the sides of the wardrobes.
It can be opened thanks to a 180° folding door in wood or glass.

954
37 1/2”

36—
58

WARDROBE WARDROBE

PASSAGEWAY

WARDROBE WARDROBE

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SPECIAL ELEMENTS
MASTER—
VINCENT
VAN DUYSEN Column with open compartment Reductions are allowed only in height, and costs of cutting the structure and doors are
2015 applied. Open compartment and lower part cannot be reduced.
- Can be inserted only in wardrobes without doors or with hinged doors.
- Central partitions and/or lateral pieces close the column and cannot be frame or glass. Wire passage EPA1 Ø 60 chrome on request on back.
- The open compartment is always in matt lacquered colours.
- Doors are always without handles because they protrude with respect to the structure. Notes
- Drawers are fitted with the “E” handle of the START door. The back of the open compartment cannot hold a mounted TV.
- Front finish: melamine front, matt lacquered colours, glossy lacquered colours and wood.
* The price does not include the central partitions or side panels, nor the
internal shelves.

Reductions

H 2343 H 2439 H 2631 H 2919

37—
58

954/1282

1443
1155
867 963

80

698 934/1262 718

778

W 954 W 1282 W 954 W 1282 W 954 W 1282 W 954 W 1282

MVGC9/23E MVGC13/23E MVGC9/24E MVGC13/24E MVGC9/26E MVGC13/26E MVGC9/29E MVGC13/29E

H 2343 H 2439 H 2631 H 2919

954/1282

1443
1155
867 963

80
678 718

798

W 954 W 1282 W 954 W 1282 W 954 W 1282 W 954 W 1282

MVGA9/23E MVGA13/23E MVGA9/24E MVGA13/24E MVGA9/26E MVGA13/26E MVGA9/29E MVGA13/29E

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS SPECIAL ELEMENTS
MASTER—
VINCENT
VAN DUYSEN Column with external drawers Reductions
2015
Reductions are allowed only in height, and costs of cutting the structure and doors are
- Can be inserted only in wardrobes with hinged doors. applied.
- Central partitions and/or lateral pieces close the column and cannot be frame or glass.
- Pairs of doors always have only one handle mounted on the right door.
- Drawers are fitted with the “E” handle of the START door.
- Front finish: melamine front, matt lacquered colours, glossy lacquered colours and wood.

* The price does not include the central partitions or side panels, nor the
internal shelves.

Doors with
type “E” handle

H 2343 H 2439 H 2631 H 2919

38—
58

954/1282

2153
1673 1865
1577

761

W 954 W 1282 W 954 W 1282 W 954 W 1282 W 954 W 1282

MCE9/23E MCE13/23E MCE9/24E MCE13/24E MCE9/26E MCE13/26E MCE9/29E MCE13/29E

Doors with
“A FILO” handle

H 2343 H 2439 H 2631 H 2919

954/1282

2153
1673 1865
1577

761

W 954 W 1282 W 954 W 1282 W 954 W 1282 W 954 W 1282

MCE9/23F MCE13/23F MCE9/24F MCE13/24F MCE9/26F MCE13/26F MCE9/29F MCE13/29F

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS FILLERS AND OPENING SIDE TRIMS
MASTER—
VINCENT
VAN DUYSEN
2015 Horizontal filler Opening fillers
The filler is supplied in two parts, one part to be fixed to the ceiling to which the other will be Can be made with START and “A FILO” door. For handles, see surcharge.
hooked on (see diagram below). Always have the 155° hinges.
The distance of the filler from the door is the client’s decision. Are the same height as the other doors in the composition.
In the cartapaglia finish, the grain direction is always vertical. Have a closing strip on their lower part.
In the wood and graffiato finish, the grain direction is always horizontal. In the wood finish, the grain direction is always vertical.

Vertical filler
The vertical filler can be placed flush with the structure or the door.
This detail must be specified in the order to prepare the side panel (see example).
If this detail is not specified when placing the order, the filler will automatically be placed
flush with the structure and the side panel will have the extension profile.

Horizontal filler side sections Vertical filler horizontal sections Opening filler horizontal sections
Flush with structure
ceiling 3
min 40 - max 268 min 180 - max 487
39— min 88 filler
max 273
58
10/25 for SISTEMA 7 openings structure structure
solid wood
structure to wall

door

wall filler side door min 180 - max 487 side

rubber partition partition
with without
extension extension
profile profile
Flush with door
ceiling 3
min 40 - max 256
min 117 filler
max 302

39/45 for 3-door flush sl. doors wardrobe

structure

door
wall filler side door
rubber partition
without
extension
profile
Set back

min 40 - max 268

structure

wall filler door

rubber

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS LIGHTING SYSTEM
MASTER—
VINCENT
VAN DUYSEN
2015 Lighting bars with front LEDs Lighting shelves
Internal compartments of Gliss Master wardrobes can be equipped with front LED lighting. It is possible to insert one or more lighting shelves in Gliss Master compartments.
The lighting bar can be applied to lids or to wooden, transparent glass and Eco Skin shelves, Using the electrified wire strip mounted on the side panel, the lighting shelf can be moved.
wood and glass shoe rack shelves. Using the electrified wire strip installed on the side Lighting shelves can be connected to the wire strip on the left side panel or
(wood, frame or glass), the shelf can be moved. For each compartment length, we have make can be mounted without wire strip.
specific lighting bars with wiring compliant with European safety standards.
A wire strip is not needed if the compartment only has lighting on the top piece. Notes
Lighting bars can be reduced with a surcharge for the shelf cutting. When placing the order, the customer must indicate how many shelves with lighting bars or
lighting shelves are required. Lighting bars or lighting shelves can be placed in the same
compartment. For assembly: a lighting system on wardrobe with hinged
doors requires a minimum extra height of 5 cm (2”).
Individual wire strip is always installed on the left side panel of the
compartment, with the exception of corner units for walk-in wardrobes and of
the compartment next to the corner unit.
When ordering, indicate compartments with wire strip.
The electrified wire strip is mandatory for wardrobes with wooden sides
and glass back.

lighting bars W 380 W 462 W 626 W 790 W 954 W 1282 open corner element external corner unit
3000 K 3,5 watt 4 watt 5,5 watt 7 watt 8 watt 11 watt 12 watt 9 watt

40—
58 EBI2C EBI4C EBI6C EBI8C EBI9C EBI13C EBA13C EBB6C

lighting shelves W 626 W 790 W 954 W 1282

D 538 th 30 12 watt 15 watt 18 watt 30 watt
3000 K

RSL/6C RSL/8C RSL/9C RSL/13C

components power supply sensor electrified wire strip connector radio control kit power supply unit
per system unit 100W (max 6 lighting bars) with brightness block 100W
(see the diagram for setting with watertight box
component use and to wire strip (1 per power for wardrobe with
calculate system cost) supply unit) glass top
optional

EAL1 ESE1 ECA1 ECO1 EKRR1 EAB1

position of position of
bar and wire strip bar and wire strip
on wooden partitions on glass partitions
lighting bar lighting bar

66 66
2 5/8” 2 5/8”

wire strip wire strip wire strip

48 48
1 7/8” 1 7/8”

84 84
3 1/4” 3 1/4”
shoe rack
DATASHEET
led light
REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS LIGHTING SYSTEM
MASTER—
VINCENT
VAN DUYSEN
2015 System construction diagram
A composition (wardrobe) can be equipped with more than one system and more than one
power supply unit. The system with sensor must be autonomous from the system with
remote controlled electrical socket.

types of systems system with sensor + wire strip system with sensor
with sensors suggested for wardrobes with doors (not for use with glass backs)
suggested for wardrobes with doors and
bars positioned only on the top piece

partition in wood, partition in wood,

frame or glass frame or glass

41—
58
* each power supply unit can power a max. of 100W or:
max 6 sensors
max 6 wire strip or 6 LED lights

sensor (1 per compartments)

power supply unit (per composition )
*
wire strips on lateral pieces (per compartment)
connector (for compositions of 4 power supply units max.)

types of systems with remote control system with wire strip for remote control system with remote control electrical socket
electrical socket or radio remote electrical socket (not for use with glass backs)
control suggested for wardrobes without doors (walk-in suggested for wardrobes without doors (walk-in wardrobes)
one radio remote control unit can control wardrobes) and glass doors and glass doors
systems with 2 power supply units max.
Otherwise, more radio remote control units
must be used.

partition in wood, partition in wood,

frame or glass frame or glass

* each power supply unit can power a max. of 100W or:

max 6 wire strips or 6 LED lights

power supply unit (per composition )

*
wire strips on lateral pieces (per compartment)
connector (for compositions of 4 power supply units max.)
radio remote control (optional) (optional) (optional)

DALI kit
(for DOMOTICA)
n. 1 for each power supply unit
cannot be used with
radio remote control

DATASHEET

REGISTERED
DESIGN

IX.2020 EKDA1

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL ACCESSORIES
MASTER—
VINCENT
VAN DUYSEN
2015
Aircub is an air purifier and aroma diffuser that eliminates up to 95% of the harmful agents inside wardrobes through a process of ionisation and ozonation. Aircub can be managed
easily from your smartphone with a dedicated app. Aircub can be installed on the back panel of each compartment. Just plug it into the electrical socket and turn it on. Every Aircub has
a single plug.
Up to 3 Aircubs per wardrobe can be installed using the specific multi-socket connector.
Information about Aircub is available on the website https://www.check-up.it in the projects section.

Aircub - air purifier product advantages

W 270 D 28 H 120 - improves air quality
W 10 5/8” D 1 1/8” H 4 3/4” - reduces bacteria that cause foul odours
(cable length L3m) - prevents mould and mites from forming
- dispenses fragrance
- does not have filters that require maintenance or changes
- includes n.1 fragrance pod
Scented wafers can be ordered online:
L3m https://shop.check-up.it/

42— EAC1

58

multi-socket connector
cable length 3m
W 250 D 60 H 40
W 9 7/8” D 2 3/8” H 1 5/8”

L3m

EAC2

==
==

For correct function it is advisable

to position the Aircub at the centre
of the compartment

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL FITTINGS
MASTER—
VINCENT
VAN DUYSEN
2015 Internal fittings Internal fittings
with wooden sides with frame or glass sides

1 2 2

8A 1

8B
7

9 11
4
6 10
43—
58 3

1 Shelf th 30 mm 4 Trouser holder 7 Shirt and sweater holder grid 10 Floor standing drawer unit only for compart.
(wood, glass, Eco Skin) only for wood sides and backs with frame or glass sides
5 Central divider piece
2 Clothes rail th mm 30 only for compart. 8A Inclined shoe rack shelf 11 Suspended drawer unit only for compart.
with wooden sides and backs only for wooden sides and backs with frame or glass sides
3 Modular drawer unit
only for wooden sides 6 Swivel pull-out 8B Horizontal shoe rack shelf
and backs mirror only for compart. only for frame sides, glass sides
with wooden sides or glass back
and backs
9 Pull-out shirt holder
only for wooden sides
and backs

Section of internal fittings

595 - 23 3/8”
575 - 22 5/8”
266-10 1/2” 309-12 1/8” 435 - 17 1/8” for use
only with wooden sides
clothes rail

538 - 21 1/8” 378 - 14 7/8”

shelf th 30 mm (1 1/8”) shelf th 30 mm (1 1/8”)

378 - 14 7/8”

grid with shirt and grid with sweater

sweater holders holders
shoe rack shelf
th mm 30 (1 1/8”)
for compartments clothes rail
with wood sides
always inclined

shoe rack shelf

th mm 30 (1 1/8”)
538 - 21 1/8” for compartments
36 - 1 3/8”
with wood sides
always inclined
46 - 1 3/4”

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL FITTINGS - SHELVES, SHOE RACK SHELVES
MASTER—
VINCENT
VAN DUYSEN
2015
wood shelves - top shelves (only D 538) shelf for external shelf for open corner element
D 538 th 30 corner unit th 30
D 378 th 30 th 30

W 298 W 380 W 462 W 626 W 790 W 954 W 1282 559x559 1081x1081 1262x1262
RI/3 RI/2 RI/4 RI/6 RI/8 RI/9 RI/13 RIB/6 RIA/11 RIA/13

glass shelves can be fitted transparent glass shelves not for use in compartments shelf for external
with front LED light bars D 538 th 30 adjacent to the corner element corner unit
and comply with the wiring D 378 th 30 in wardrobes with doors th 30
standards

W 380 W 462 W 626 W 790 W 954 W 1282 559x559

RV/2 RV/4 RV/6 RV/8 RV/9 RV/13 RVB/6

44— Eco Skin shelves can be Eco Skin shelves - shelves with Eco Skin cover (only D 538) Eco Skin shelf for open
58 fitted with front LED light D 538 th 30 corner element
bars and comply with the D 378 th 30 th 30
wiring standards

When ordering,
specify the finish shelf for external
Eco Skin and profile corner unit
th 30

W 298 W 380 W 462 W 626 W 790 W 954 W 1282 559x559 1081x1081 1262x1262
RE/3 RE/2 RE/4 RE/6 RE/8 RE/9 RE/13 REB/6 REA/11 REA/13

Shoe rack shelves Notes

Shoe rack shelves can be used with wood sides and with frame or glass sides. To hook to the frame or glass sides, add the price of the relative metal profiles.
When inserted between wood sides, this part will always be inclined (example 1).
When there are frame or glass sides, this part will always be horizontal (example 2).

example 1 shoe rack shelves example 2

D 538 th 30

W 462 W 626 W 790 W 954 W 1282

RSP/4 RSP/6 RSP/8 RSP/9 RSP/13

example 1 shoe rack shelves Glass shoe rack shelves

D 368 th30 Shoe rack shelves in glass can be used only with
wood sides.

glass shoe rack shelves

D 520 th 30

W 462 W 626 W 790 W 954 W 1282

RQP/4 RQP/6 RQP/8 RQP/9 RQP/13

metal profile metal profile metal profile for attaching

for attaching shelves for attaching shelves shelves with LEDs to frame side
to frame side to glass side (always on the left, except in corner
shelves)

W 790 W 954 W 1282

DATASHEET RSW/8 RSW/9 RSW/13
PST PSV PSE
REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL FITTINGS - CLOTHES RAILS, HANGER RAILS, PULL-DOWN HANGERS,
MASTER—
VINCENT CENTRAL DIVIDER PIECES
VAN DUYSEN
2015

clothes rails clothes rail for

corner compartment
with doors

for external
W 298 W 380 W 462 W 626 corner unit W 790 W 954 W 1282
PO/3 PO/2 PO/4 PO/6 POB/6 PO/8 PO/9 PO/13 POA/6

clothes rail clothes rails

for D 435 for open corner
to mount on wood shelves or compartment
top only with hinged doors

nr. 1 piece on compartment W 626/790

45— nr. 2 pieces on compartment W 954/1282

58

W 723 W 1262
POQ/4 POA/7 POA/13

pull-out coat hanger rail hanger hanger with clips

for melamine shelf (without profile) th 30 W 450 W 450
beech stained grey beech stained grey
(package of 10 pieces) (package of 3 pieces)

OP7 OP10 OP11

Maximum pull-down hanger

load-bearing capacity H mm 1040
10 kg for compart. W 626 for compart. W 790 for compart. W 954 for compart. W 1282

SER/6 SER/8 SER/9 SER/13

When ordering, specify floor standing

1734
the finish of the front profile: central divider pieces
pewter colour or bronze 1542
D 538 th 30
1350
1158
966
774
582
390

SDT/04 SDT/05 SDT/07 SDT/09 SDT/11 SDT/13 SDT/15 SDT/17

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS GLASS LID FOR CHEST OF DRAWERS
MASTER—
VINCENT
VAN DUYSEN
2015 To be used only in compartments with wooden sides
Modular chests of drawers can be made with a transparent glass lid in the module widths
790/954/1282.
It is mandatory that the first drawer be H 190 in wood (special measure).
Drawer dividers cannot be inserted in the first drawer.
The top can be fitted with a LED lighting bar, but it cannot be connected to the cable holder.
The connection to the power cord has to pass behind the back panel.
Eco Skin bottoms in grey can be inserted.

W 790 W 954 W 1282

CSV/08 CSV/09 CSV/13

46—
58

Example of use

H 190 wood

canvas-covered boxes W 500 D 400 H 150 W 500 D 400 H 300

with Molteni logo (package of 2 pieces) (package of 2 pieces)

CES1 CES2

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL FITTINGS - MOVABLE TRAYS SET
MASTER—
VINCENT
VAN DUYSEN
2015 Only for use in compartments with wooden sides

These units can be positioned on the floor-standing drawer units or suspended over a Finishes
drawer H 190 of the same dimensions as the unit (see ex. 1). The trays are always made in melamine in the finish of the structure with bottom in
The price of the blocks does not include the shelf covering the drawer unit. grey Eco Skin.
The trinket tray is always dolomite lacquered.

example 1

954/1282 954/1282 954

47— 307

58 307
H 190 262
trouser holder
H 190 H 190

774
704

The price of the blocks for compartment for compartment

does not include the W 954 W 1282
shelf covering the
drawer unit

BVS9/03/1 BVS13/03/1

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL FITTINGS - PULL-OUT SHIRT HOLDER - GRID WITH SHIRT AND SWEATER HOLDERS
MASTER—
VINCENT
VAN DUYSEN
2015 Pull-out shirt holder Notes
only for use in compartments with wooden sides Do not use for compartments with glass back.

These units can be positioned on the floor-standing drawer units or suspended over a Finishes
drawer H 190 of the same dimensions as the shirt unit (see ex. 1). The tray set on top of the shelf is always finished in melamine in the same finish as the
. structure with Eco Skin bottom grey finish.
The shirt holder grid is always dolomite lacquered.

example

954/1282 954

307
48—
307
58 H 190 262
trouser holder
H 190

774
704

When ordering, for compartment for compartment

specify the finishes of W 954 W 1282
the trays set on shelves including resting shelf including resting shelf
and the shirt holder grid

BPC9/03/1 BPC13/03/1

Grid with shirt and sweater holders

These elements are fixed and to be used set on shelves or on drawer units.
Only in compartments with wood sides.

Grid with shirt and sweater

holders
W 626 D 378 H 480 W 790 D 378 H 480 W 954 D 378 H 480 W 1282 D 378 H 480
202 106 106

202 106 106

202 106 106

202 106 106

600 529 622 622 622

294 294 223 294 223 316 294 294 316 294 294 316

BGR6/05/1 BGR8/05/1 BGR9/05/1 BGR13/05/1

Examples of use
1312 1312

DATASHEET

REGISTERED
DESIGN

IX.2020 790 462

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL FITTINGS - MIRRORS
MASTER—
VINCENT
VAN DUYSEN
2015
Procedure for using the swivel pull-out mirror

298 298 462 298 298 462

NO NO YES YES NO YES

hinged door sliding / flush sliding door

mirror swivel pull-out mirror

applied to inside of to be applied onto the side,
hinged door partition or central divider pieces
W 315 H 1600 th 4 D 555 H 1443 th 90
49—
58
plan
view

1542 1542

rotated

SPECH SPECS/17

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS CAVE handle
MASTER—
VINCENT
VAN DUYSEN
2015 Internal fittings - modular drawers and trays Warnings on using compartments adjacent to the corner element
It is impossible to use trouser or trinket trays (used individually).
Notes
The parts of this internal fittings are produced with width and height dimensions Wooden drawer finishes
corresponding to the modular compartments. This makes it possible to organise the melamine front in structure finish and piqué melamine
internal spaces in a number of ways.
When ordering, specify the handle finish as pewter colour or bronze. drawer inside in grey saffiano melamine

For the CAVE handle covered in Eco Skin, add a supplementary charge each. Open drawer finishes
melamine front in structure finish and piqué melamine
No reductions of any kind can be made on drawers, trays and pairs inside in grey saffiano melamine
of side panels.

Items available

50—
Wooden drawers Open drawers
58 (melamine) only lower handle

Upper handle

126
126 4”
4”
61 2 3/8”

190
190 7 1/2”
7 1/2”
61 2 3/8”

382 382
15” 15”

61 2 3/8”

416 - 580 - 716 - 880 - 1208

416 - 580 - 716 - 880 - 1208 16 3/8-22 7/8”- 28 1/4”- 34 5/8”- 47 1/2”
16 3/8-22 7/8”- 28 1/4”- 34 5/8”- 47 1/2”

Lower handle

126
4”

190
7 1/2”

382
15”

DATASHEET 416 - 580 - 716 - 880 - 1208

16 3/8-22 7/8”- 28 1/4”- 34 5/8”- 47 1/2”

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS CAVE handle
MASTER—
VINCENT
VAN DUYSEN
2015 Trouser holder / laundry sack tray finishes
melamine front in structure finish or piqué melamine
inner frame in grey saffiano melamine with trouser holder
in grey saffiano embossed
laundry sack in natural cotton in the colour ecru

Trinket tray finishes

melamine front in structure finish or piqué melamine
inner frame, bottom and grid in grey saffiano melamine

Pull-out trays finishes

melamine front in structure finish or piqué melamine
with shelf and back in grey saffiano melamine

Trouser holder
only upper handle

51—
61 2 3/8”
58

580 - 716 - 880

22 7/8”- 28 1/4”- 34 5/8”

N.B.: usable only with suspended side panels

as the bottom piece

580 - 22 7/8” 716 - 28 1/4” 880 - 34 5/8”

Trinket trays (tie and belt)
with internal grid
only upper handle

61 2 3/8”
580 - 716 - 880
22 7/8”- 28 1/4”- 34 5/8”
internal tray dividers

Pull-out trays
only lower handle

61 2 3/8”
416 - 580 - 716 - 880
16 3/8-22 7/8”- 28 1/4”- 34 5/8”

Tray laundry sack

only upper handle

61 2 3/8” if the tray is

H suspended
module as a lower element
382 consider ( )
15”

580 - 716 - 880

22 7/8”- 28 1/4”- 34 5/8”

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS HOLD handle
MASTER—
VINCENT
VAN DUYSEN
Internal fittings - modular drawers and trays Warnings on using compartments adjacent to the corner element
2015
It is impossible to use trouser or trinket trays (used individually).
Notes
The parts of this internal fittings are produced with width and height dimensions Wooden drawer finishes
corresponding to the modular compartments. This makes it possible to organise the melamine front in structure finish and piqué melamine
internal spaces in a number of ways. fine grain finish front with pewter colour or bronze profile
The pairs of side panels suspended or resting on the floor are essential for inserting all
the elements. drawer inside in grey saffiano melamine
Compositions must be completed with a top shelf.
When ordering, specify the handle finish as pewter colour or bronze. Glass drawer finishes
transparent glass front with pewter colour or bronze frame
No reductions of any kind can be made on drawers, trays and pairs of side panels. inside in grey saffiano melamine

Open drawer finishes

melamine front in structure finish and piqué melamine
inside in grey saffiano melamine

Items available

52—
Wooden drawers Glass drawers Open drawers
58 (melamine or fine grain)

HOLD handle
(pewter colour or bronze finish)

126
126 4”
4”
61 2 3/8”

190 190 190

7 1/2” 7 1/2” 7 1/2”
61 2 3/8”
416 - 580 - 716 - 880 - 1208
16 3/8-22 7/8”- 28 1/4”- 34 5/8”- 47 1/2”

382 382
15” 15”

61 2 3/8”

416 - 580 - 716 - 880 - 1208 416 - 580 - 716 - 880 - 1208
16 3/8-22 7/8”- 28 1/4”- 34 5/8”- 47 1/2” 16 3/8-22 7/8”- 28 1/4”- 34 5/8”- 47 1/2”

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS HOLD handle
MASTER—
VINCENT
VAN DUYSEN
2015 Trouser holder / laundry sack tray finishes HOLD handle
melamine front in the same finish as the structure, piqué melamine or (pewter colour or bronze finish)
fine grain with pewter colour or bronze profile
inner frame in grey saffiano melamine with trouser holder
in grey saffiano embossed
laundry sack in natural cotton in the colour ecru

Trinket tray finishes

melamine front in the same finish as the structure, piqué melamine or
fine grain with pewter colour or bronze profile
inner frame, bottom and grid in grey saffiano melamine

Pull-out trays finishes

melamine front in structure finish or piqué melamine
with shelf and back in grey saffiano melamine

53— Trouser holder

58

61 2 3/8”

580 - 716 - 880

22 7/8”- 28 1/4”- 34 5/8”

N.B.: usable only with suspended side panels

as the bottom piece

580 - 22 7/8” 716 - 28 1/4” 880 - 34 5/8”

Trinket trays (tie and belt)
with internal grid

61 2 3/8”
580 - 716 - 880
22 7/8”- 28 1/4”- 34 5/8”

internal tray dividers

Pull-out trays

61 2 3/8”
416 - 580 - 716 - 880
16 3/8-22 7/8”- 28 1/4”- 34 5/8”

Tray
laundry sack

61 2 3/8” if the tray is

H suspended
module as a lower element
382 consider ( )
15”

580 - 716 - 880

22 7/8”- 28 1/4”- 34 5/8”

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS EXAMPLES OF COMPOSITE DRAWER UNITS WITH CAVE HANDLE
MASTER—
VINCENT
VAN DUYSEN
2015 Melamine faced drawers have upper and lower handles.
Trouser holder and trinket trays always have an upper handle;
pull-out trays and open drawers always have a lower handle.

Melamine drawers
H 126/190/382

774
582
390

Trouser holders/trinket trays/laundry sack tray

54—
58

trouser holder
trouser holder
drawer trinket tray
390 drawer
trinket tray 262
166
trouser holder trouser holder drawer drawer

Pull-out trays

pull-out tray

pull-out tray pull-out tray drawer

drawer
pull-out tray pull-out tray drawer
drawer
drawer

drawer drawer drawer drawer

Open drawers

open drawer

open drawer
drawer

open drawer
drawer drawer

drawer drawer drawer

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS INTERNAL FIITINGS - ACCESSORIES FOR DRAWERS
MASTER—
VINCENT
VAN DUYSEN
2015 Leather trays Eco Skin bottoms
Handmade leather trays with Alcantara bottom. Made with grey coloured Eco Skin.
The version for men is brown (cat. P col. D533),
The version for women is powder pink (cat. P col. D524).

leather trays
men’s drawers
W 206 D 430 H 58 (A)
W 206 D 215 H 58 (B)
watch holder watch/ jewellery holder complete men’s
(A) bracelet holder with movable dividers drawer offer
(A) (B)

55—
CEV/MA1 CEV/MA2 CEV/MB1 CVM1
58

leather trays
women’s drawers
W 206 D 430 H 58 (A)
W 206 D 215 H 58 (B)
watch holder watch/ jewellery holder ring holder earring holder complete women’s
(A) bracelet holder with movable (B) (B) drawer offer
(A) dividers
(B)

CEV/WA1 CEV/WA2 CEV/WB1 CEV/WB2 CEV/WB3 CVW1

Modularity drawings
for inserting trays into
drawers

drawer W 416 drawer W 580 drawer W 716

370 534 670

(B) (B) (B)

1 tray (A) 2 trays (A) 3 trays (A)

(A) (A) (B) (B) (A) (B)
or 2 trays (B) or 4 trays (B) or 6 trays (B)

drawer W 880 drawer W 1208

834 1162

(B) (B) (B) (B) (B)

(A) (B) (B) (A) 4 trays (A) (A) (B) (B) (B) (A) 5 trays (A)
or 8 trays (B) or 10 trays (B)

Eco Skin bottoms

for drawers
D 432/473 special for 1st drawer with glass lid

W 366 W 530 W 666 W 830 W 1158

DATASHEET CEQ/F4 CEQ/F6 CEQ/F8 CEQ/F9 CEQ/F13

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS ISLAND DRAWER UNIT
MASTER—
VINCENT
VAN DUYSEN
2015
Two versions are available: with or without trinket trays in dolomite lacquer. version with trinket trays
Shelves in Eco Skin are available in colours in the catalogue. Standard handles are - Side A has 6 drawers H 190 and 2 extractable trinket tray blocks.
mounted in pewter colour or bronze finish. - Side B has 4 drawers H 190 and and lower open compartments.
For the CAVE handle covered in Eco Skin, add a supplementary charge each.
version without trinket trays
- Side A has 6 drawers H 190 and upper open compartment.
- Side B has 4 drawers H 190 and and lower open compartments.

Dimensions of the island cannot be reduced, and the compositon

cannot be modified.

Only for HOLD handle

It is possible to substitute the melamine drawers with glass drawers by adding the
difference in price from CLN8/19 and CVN8/19.
It is possible to substitute the melamine drawers with drawers with fine grain fronts by
adding the difference in price of the finishes of the code CLN8/19.

island drawer unit

with trinket trays
56— W 1518 D 1022 H 897
W 59 3/4” D 40 1/4” H 35 3/8”
58

Eco Skin Eco Skin

shelf shelf

side A side B
HOLD handle CAVE handle
ISC15/09/1H ISC15/09/1C

island drawer unit

without trinket trays
W 1518 D 1022 H 897
W 59 3/4” D 40 1/4” H 35 3/8”

Eco Skin Eco Skin

shelf shelf

side A side B
HOLD handle CAVE handle
ISC15/09/2H ISC15/09/2C

Drawer unit

Standard handles are mounted, in pewter colour finish.

drawer unit
W 1292 D 527 H 897
W 50 7/8” D 20 3/4” H 35 3/8”

HOLD handle CAVE handle

DATASHEET ISC13/09/1H ISC13/09/1C

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS ISLAND WITH GLASS TOP
MASTER—
VINCENT
VAN DUYSEN
2015
Island with glass top Notes
The divider grids are specific for upper drawers.
Island finishes If dividers are desired in the other drawers,
silver cembran use those shown on pages 127/130 of the price list.
larix dark
light chestnut
dark chestnut
matt lacquer colours in the Molteni colour range

Handles / top profile finishes

pewter colour
bronze

No reductions of any kind are possible

For the CAVE handle covered in Eco Skin, add a supplementary charge each.

island with glass top

W 1272 D 1022 H 864
57— W 50 1/8” D 40 1/4” H 34”
58

side A side B
HOLD handle CAVE handle
ISW13/09/3H ISW13/09/3C

island with glass top

W 1498 D 1022 H 864
W 59” D 40 1/4” H 34”

side A side B
HOLD handle CAVE handle
ISW15/09/3H ISW15/09/3C

accessories partition grid Eco Skin bottom

for upper drawer grey saffiano grey
W 666 D 443 W 1158 D 443 W 666 D 443 W 1158 D 443
W 26 1/4” D 17 1/2” W 45 5/8” D 17 1/2” W 26 1/4” D 17 1/2” W 45 5/8” D 17 1/2”

CEGD/28 CEGD/33 CEQ/F28 CEQ/F33

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.
GLISS ISLAND WITH TRANSPARENT GLASS DOORS
MASTER—
VINCENT
VAN DUYSEN
2015 Island that can be created with structure in transparent glass and horizontal parts in wood. Structure finish
Shelves are in wood except for those indicated (*) which are always in glass. pewter colour
bronze
The island cannot be reduced or modified with respect to the versions in
the price list. Base unit / top / shelf finishes
eucalyptus
graphite oak

H 880 - 34 5/8” W 1673 - 65 7/8” W 2001 - 78 3/4”

with top
D 1000 - 39 3/8”

* *
* *

58—
58

ISV16/08 ISV20/08
without LEDs
with LEDs

The island is available with or without LED lighting applied on all shelves and tops as shown.
The system includes the cable holders and power supply units that enable it to work with a remote control.

front back

*
glass
shelves

wood
shelves

DATASHEET

REGISTERED
DESIGN

IX.2020

Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on
moltenigroup.com the latest product information available at the time of printing.