Jubail Industrial Colleg
Department of Electrical and Electronic Engineering Technolog
EEE101 Electrical Circuits
Student Name: Abdulrahman Alawad Semester: 38 Date: 17/02/202
Student ID: 40290315 Section: Assignment #
1. Find the color code for the following resistances which have a 10% tolerance.
a. 1500Ω
brown, green, red, silve
b. 6.73 MΩ
blue, violet, green, silver
c. 10 Ω
brown, black, black, silver
d. 6.2 kΩ
blue, red, red, silver
e. 68 Ω
blue, grey, black, silver
2. Calculate IT, V2, I1, V3, I4 for the circuit shown below
It=70 m
V2= 6
I1=30 m
V3= 12
1


v
4
e
1
.
1
y
I4= 30m
3. Determine the equivalent resistance across the terminal AB for the circuit shown below
Rt = R1 + 1/(1/R2 + 1/R3 + 1/R4) = 150 + 1/(1/330 + 1/680 + 1/470) = 300.86Oh m
4. State Ohms law
I=V/
5. What is the unit for resistance, voltage and current
resistance= ohm
voltage= vol
current= amper
6. What is the voltage across the 200 Ω resistor if the current through it is 7 mA?
V=I*R= 200*7m= 1.4
7. What is the current through a 5 KΩ resistor if the voltage across it is 20 V?
I=V/R = 20/5000 = 4m
2


R
8. How much resistance is required to limit the current to 3 mA if the potential drop across the resistor
is 12 V?
R= V/I = 12/3m =4000 Ω
9. Draw a circuit that has a 20 volt power supply in which 2 resistors connected in series of total 3k ohm
that connected in parallel to three other resisors which connected in series of total 21 ohm
3