FAPB0
ABBREVIATED COMPONENT
MAINTENANCE MANUAL
WITH
ILLUSTRATED PARTS LIST
FRONT SUNVISOR
Part Number
160-10732-990 & 160-11103-990
TP
Initial Issue : Sep 16/87
25-13-11 Page 1
Revision 6
R Jan 07/2015
FAPB0
The content of this document is the property of Vision Systems Aeronautics. It is supplied
in confidence and commercial security on its contents must be maintained. It must not be
used for any purpose other than that for which it is supplied nor may information
contained in it be disclosed to unauthorized persons. It must not be reproduced in whole
or in part without permission in writing from Vision Systems Aeronautics.
©Vision Systems Aeronautics 2006. All rights reserved.
TP
25-13-11 Page 2
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
RECORD OF REVISIONS
REV. ISSUE INSERTED REV. ISSUE INSERTED
No. DATE DATE BY No. DATE DATE BY
1 Sep 16/1987
2 Mar 20/1989
3 Oct 10/1997
4 Jul 09/2009
5 Sep 17/2010
6 Jan 07/2015
ROR
25-13-11 Page 1
Jan 07/2015
R
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
RECORD OF TEMPORARY REVISIONS
REV. ISSUE INSERTED REV. ISSUE INSERTED
No. DATE DATE BY No. DATE DATE BY
RTR
25-13-11 Page 1
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
LIST OF EFFECTIVE PAGES
CHAPTER SECTION PAGE DATE CHAPTER SECTION PAGE DATE
TITLE PAGE STORAGE
1 Jan 07/2015 15001 Jul 09/2009
2 Jul 09/2009
RECORD OF REVISION ILLUSTRATED PARTS LIST
1 Jan 07/2015 10001 Jul 09/2009
10002 Jul 09/2009
10003 Jul 09/2009
RECORD OF TEMPORARY REVISION 10004 Jan 07/2015
1 Jul 09/2009 10005 Jan 07/2015
LIST OF EFFECTIVE PAGES
1 Jan 07/2015
SERVICE BULLETIN LIST
1 Jul 09/2009
TABLE OF CONTENTS
1 Jan 07/2015
LIST OF ILLUSTRATIONS
1 Jul 09/2009
INTRODUCTION
1 Jul 09/2009
DESCRIPTION AND OPERATION
1 Jul 09/2009
2 Jul 09/2009
CLEANING
4001 Jul 09/2009
ASSEMBLY
7001 Jan 07/2015
LEP
25-13-11 Page 1
R
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
SERVICE BULLETIN LIST
SERVICE BULLETIN INCORPORATION INTO CMM TITLE
Number Rev Date Rev
TOC
25-13-11 Page 1
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
TABLE OF CONTENTS
PAGE
TOC
25-13-11 Page 1
Jan 07/2015
R
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
LIST OF ILLUSTRATIONS
PAGE
Description and Operation
FIGURE 1:
FRONT Sunvisor ........................................................................................................................2
Illustrated Part List
FIGURE 1:
FRONT Sunvisor ................................................................................................................10004
LOI
25-13-11 Page 1
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
INTRODUCTION
1. General
A. ATA iSpec 2200 specifications is used for this manual.
B. AECMA Simplified English (PSC-85-16598) is used in this manual.
C. This manual contains an illustrated part list (IPL).
D. All dimensions and quantities in this manual are in SI units with Imperial units in
parentheses. A comma shows a decimal part of an SI unit. A full point shows a decimal
part of an Imperial unit.
E. Procedures listed in this document are approved by our internal maintenance unit.
F. Maintenance Task Oriented Support System (MTOSS) task and subtask identification is
used in this manual. The maintenance tasks and other data have special MTOSS
numbers for the use of the Electronic Data Processing (EDP).
INTRO
25-13-11 Page 1
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
DESCRIPTION AND OPERATION
1. General
A. Description
Refer to Fig.1.
This equipment is used to protect the flight crew from the sun coming through the front windows and
the front part of the lateral window in the cockpit.
The Sunvisor is composed of:
- A pivot articulated support
- A smoked polycarbonate screen
The Sunvisor is protected:
- Scratch-proof screen
- All light alloy parts are anodised
B. Operation
The Sun Visor can move manually by rotating:
- The screen around its axis
- The ball joint.
The sunvisor is settable by pilot:
- Rotational tightness around the screen axis is adjusted manually using the knurled wheel
(item 150).
- The ball joint movement can be adjusted by turning the ball joint adjustment knob (item 60).
WARNING: Do not block the knob.
C. Data
Refer to Fig.1.
P/N: 160-10732-990 & 160-11103-990
Height (mm): 295 (11.6 in)
Width (mm): 470 (18.5in)
Depth (mm): 68 ( 2.6 in)
Weight (kg): 0,580 (1.27 Lb)
25-13-11 Page 1
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
FRONT Sunvisor
Figure 1 / GRAPHIC 25-13-11-991-801-A01
25-13-11 Page 2
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
CLEANING
TASK 25-13-11-100-801-A01
1. Cleaning of Front Sunvisor
A. Necessary Tools
Soapy water
B. Procedure
SUBTASK 25-13-11-110-001-A01
(1) Clean the sun visor (1-1): Refer to IPL Figure 1
CAUTION: AVOID WIPING DRY
(a) Clean the screen with soapy water only.
25-13-11 Page 4001
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
ASSEMBLY
TASK 25-13-11-400-801-A01
1. Assembly of Front Sunvisor
A. Necessary Tools
No specific tool.
B. Procedure
SUBTASK 25-13-11-420-001-A01
(1) Assembly the cranked spindle assembly (1-160): Refer to IPL Figure 1
(a) Put the ball joint adjustment knob (1-060) under the locking device collar (1-050).
(b) Put the spherical bowl (1-030).
(c) Put the 3 spring blades (1-020).
(d) Put the mounting support (1-010).
SUBTASK 25-13-11-420-002-A01
(2) Assembly the sunvisor (1-1): Refer to IPL Figure 1
(a) In the button (1-150), put the nut (1-140) then the washer (1-130), the spring (1-120) and the
washer (1-110).
(b) Put this assembly in the screen (1-100).
(c) Put the cranked spindle assembly (1-160) in the screen (1-100).
(d) Screw the cranked spindle assembly (1-160) with the button (1-150). The screen stays in
opened position.
25-13-11 Page 7001
Jan 07/2015
R
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
STORAGE
TASK 25-13-11-500-801-A01
1. Storage of Front Sunvisor
A. Procedure
SUBTASK 25-13-11-550-001-A01
(1) Storage:
(a) Use the appropriate packaging to protect the equipment against the atmospheric conditions
and against the external damage.
(b) Packaging:
NOTE: EQUIVALENT SUBSTITUTES MAY BE USED
MANUFACTURER’S
MATERIALS APPLICATION
REFERENCE/SOURCE
Reusable box ATA 300 Cat. II Locally Available Storage
25-13-11 Page 15001
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
ILLUSTRATED PARTS LIST
TASK 25-13-11-400-801-A01
1. Introduction to the illustrated parts list
A. Purpose
This section is a list of all the components of the unit which is given in this manual, and helps the
identification of each component. It contains a numerical index, detailed parts list etc., and all
necessary data for the procurement of the components.
B. How to use the illustrated parts list
(1) Each component is identified as follows:
(a) By the manufacturer’s Part Number. The alphanumerical index of the manufacturers’ Part
Numbers gives, for each component, on the same line as the Part Number:
– the figure on which the component is shown,
– the item number,
– the total quantity necessary for each Catalogue Sequence Number (CSN),
– the equivalent Part Number, if applicable, given by the airlines.
(b) By the function of the component.
The Illustrated Parts List makes it possible to find the location of each component on the
figures and in the different groups of parts into which the equipment is broken down.
(c) By the illustration of the component.
The Illustrated Parts List makes it possible to find the location of each component on the
figures and in the different groups of parts into which the equipment is broken down.
The Item Numbers have a numerical base. For each figure, the Item Numbers begin at "1" and
are given in numerical sequence with regular increments of tens.
Items numbers do not change during the total life of the item. A variant letter is added to the
Item Number as a result of any modification included.
25-13-11 Page 10001
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
Letter "A" identifies the items of the original version. Usually, variant letters are not shown on
the figures.
NOTE: When the Illustrated Parts List includes handed assemblies, the Item Number with numerical
base 2 refers to a RH assembly and its variant. The Item Number with numerical base 1 refers to the
LH assembly and its variant.
The numerical order 1, 2, 3, .... 9 is used for the identification of several assemblies included in a
common Illustrated Parts List. Because there is no direct relationship between these assemblies,
these are not variants ; but they include a high percentage of common parts.
For "SELECT FROM" and "OVERSIZE, UNDERSIZE" parts, the "ten" increments are changed
to "five" increments.
The EFFECTIVITY CODE column shows the Item Number of the next higher assembly or sub-
assembly. For items used on the full range of the primary equipment, the EFFECTIVITY
CODE column is kept blank. This column is also kept blank for assemblies located on a line
which is not indented (line 1).
The "UNITS PER ASSY" column shows the quantity per assembly which is necessary for a
next higher assembly. In the indexes, the quantity shown refers to the quantity broken down
for a given Catalogue Sequence Number (CSN).
C. Revision
(1) When a line is modified, new or deleted, there is a letter "R" or a vertical black line at the end of the
line (the date of issue is changed).
(2) After each modification of a given item, the numerical Item Number itself does not change. But the
variant letter changes from "A" to "B", then to "C" thru "Z" (do not use letters "I" and "O").
(3) When it is necessary to add a new part, its name must be on the line which agrees with the correct
position of this part in the breakdown of the assembly. Select its Item Number from open sequences.
(4) Addition of new figures (figure variants):
When the layout of the basic figure does not make it possible to show new parts or the modified parts
in their new form, a new figure (called "figure variant") is then used. This figure variant will have the
same number as that of the basic figure, suffixed by a letter given in alphabetical sequence (do not
use "I" and "O").
(5) Deletion of items:
(a) Before deletion of items from the Illustrated Parts List:
– make sure, first, that the modification is applied to all the applicable assemblies.
– make sure, for items kept in store, that they are modified or removed from store.
(b) If these two conditions are satisfied, identify the deleted items, in the nomenclature column, by
the word: "DELETED".
(c) The Part Number of the deleted part is then kept in the indexes with the word "DELETED".
25-13-11 Page 10002
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
D. Assembly breakdown
(1) The assemblies are broken down and each of their components is shown in the disassembly
sequence.
(2) The vertical lines of the indention are shown as dotted lines as follows:
1 2 3 4 5 6 7 (Indenture number)
Assembly
. Component of the assembly
. Sub-assembly
. . Component of the sub-assembly
. . . Detail part
(3) This sequence is, in fact, modified by the nomenclature of the attaching parts and storage parts.
The attaching parts are shown immediately below the assembly or sub-assembly they attach, and
above the detail parts.
(4) The storage parts are shown immediately below the parts on which they are installed for protection.
(5) The attaching parts and storage parts are:
– indented in line with the assembly, sub-assembly or part to which they belong,
– identified by the words "ATTACHING PARTS" or "STORAGE PARTS" shown on the line above,
– followed by three stars shown on the line below.
25-13-11 Page 10003
Jul 09/2009
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
2. Detailed parts list
160
Clip
P/N 160-11652-000
FRONT Sunvisor
Figure 1 / GRAPHIC 25-13-11-991-001-A01
25-13-11 Page 10004
Jan 07/2015
R
ABBREVIATED COMPONENT MAINTENANCE MANUAL
160-10732-990 & 160-11103-990
AIRLINE UNITS
FIG. EFFECT
PART NUMBER STOCK NOMENCLATURE PER
ITEM CODE
NUMBER ASSY
1 - 1A 160-10732-990 FRONT SUNVISOR SUPSD BY P/N 160-11103-990 RF
FRONT SUNVISOR SUPSD BY P/N 160-11103-990
- 1B 160-11103-990 AMDT A RF
160-11103-990 FRONT SUNVISOR SUPSD BY P/N 160-11103-990
- 1C AMDT B RF
AMDT A
160-11103-990 FRONT SUNVISOR SUPSDS P/N 160-11103-990
- 1D AMDT A RF
AMDT B
100A 160-10741-260 . VISOR SCREEN 1
110A 160-10602-800 . WASHER 16 x 3 1
120A 160-10603-000 . SPRING 1
130A 160-10604-800 . WASHER 12.5 x 2 1
140A 900-02023-000 . NUT H M8 (Aluminium Alioy) SUPSD BY ISO 4032 1
140B ISO 4032 M8-8 . NUT H M8 (Aluminium Alioy) 1
150A 160-10605-800 . KNOB 1
160A 160-11111-199 . CRANKED SPINDLE ASSEMBLY 1
10A 160-10746-944 .. MOUNTING SUPPORT 1
20A 160-10747-000 .. SPRING BLADES 4
.. SPHERICAL BOWL R15 SUPSD BY
- 30A 160-10750-080 P/N 160-10750-880
1A, 1B 1
30B 160-10750-880 .. SPHERICAL BOWL R15 1C, 1D 1
40A 160-10744-210 .. BALL JOINT (NOT PROCURABLE) 1
.. LOCKING DEVICE COLLAR SUPSD
- 50A 160-10748-744 BY P/N 160-10748-041
1A 1
.. LOCKING DEVICE COLLAR SUPSD
- 50B 160-10748-041 BY P/N 160-10748-744
1A 1
.. LOCKING DEVICE COLLAR SUPSD BY
- 50C 160-11106-800 P/N 160-11710-800
1B, 1C 1
.. LOCKING DEVICE COLLAR SUPSDS
50D 160-11710-800 P/N 160-11106-800 (NOT PROCURABLE)
1D 1
60A 160-10749-944 .. BALL JOINT ADJUSTMENT KNOB 1
.. FLUTED PIN GO7 3x14 SUPSD
- 70A 900-04021-000 BY P/N 900-04035-000
1A 1
.. SPRINGY PIN 3x15E SUPSD
- 70B 900-04035-000 BY NAS 5319-05-15 (NOT PROCURABLE)
1B 1
70C NSA 5319-05-15 .. SPRINGY PIN 3x15E SUPSDS P/N 900-04035-000 1B, 1C, 1D 1
- 80A 160-10743-800 .. TAPER BEARING SUPSD BY P/N 160-10600-800 1A 1
.. TAPER BEARING SUPSDS P/N 160-10743-800
80B 160-10600-800 (NOT PROCURABLE)
1B, 1C, 1D 1
.. CRANCKED SPINDLE Ø8 + SLEEVE SUPSD BY
- 90A 160-10742-744 P/N 160-10742-180
1A 1
.. CRANCKED SPINDLE Ø8 + SLEEVE SUPSD BY
- 90B 160-10742-180 P/N 160-11107-026
1A 1
.. CRANCKED SPINDLE Ø8 SUPSDS BY
90C 160-11107-026 P/N 160-10742-180 (NOT PROCURABLE)
1B, 1C, 1D 1
- ITEM NOT ILLUSTRATED
25-13-11 Page 10005
Jan 07/2015
R
