Semiconductor
STN2907
PNP Silicon Transistor
Descriptions
• General purpose application
• Switching application
Features
• Large collector current
• Low collector saturation voltage
• Complementary pair with STN2222
Ordering Information
Type NO. Marking Package Code
STN2907 STN2907 TO-92
Outline Dimensions unit : mm
3.35~3.55
4.4~4.6
2.15~2.35
4.4~4.6
0.38~0.42
1.96~2.16
14.0±0.40
1.27 Typ.
2.54 Typ.
1 2 3
1.1~1.3
PIN Connections
0.38
1. Emitter
2. Base
3. Collector
KST-9063-003 1
STN2907
Absolute maximum ratings Ta=25°C
Characteristic Symbol Ratings Unit
Collector-Base voltage VCBO -60 V
Collector-Emitter voltage VCEO -40 V
Emitter-Base voltage VEBO -5 V
Collector current IC -600 mA
Collector dissipation PC 625 mW
Junction temperature Tj 150 °C
Storage temperature Tstg -55~150 °C
Electrical Characteristics Ta=25°C
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Collector-Base breakdown voltage BVCBO IC=-10µA, IE=0 -60 - - V
Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -40 - - V
Emitter-Base breakdown voltage BVEBO IE=-10µA, IC=0 -5 - - V
Collector cut-off current ICBO VCB=-50V, IE=0 - - -10 nA
DC current gain hFE VCE=-10V, IC=-10mA 75 - - -
Collector-Emitter saturation voltage VCE(sat) IC=-150mA, IB=-15mA - - -0.4 V
Transistor frequency fT VCE=-20V, IC=-50mA 250 - - MHz
Collector output capacitance Cob VCB=-10V, IE=0, f=1MHz - 6.0 - pF
KST-9063-003 2
STN2907
Electrical Characteristic Curves
Fig. 1 PC-Ta Fig. 2 IC-VBE
Fig. 3 IC-VCE Fig. 4 VCE(sat)-IC
Fig. 6 hFE-IC
Fig. 5 hFE-IC
-55°C
KST-9063-003 3
STN2907
These AUK products are intended for usage in general electronic equipments(Office and
communication equipment, measuring equipment, domestic electrification, etc.).
Please make sure that you consult with us before you use these AUK products in equipm-
ents which require high quality and/or reliability, and in equipments which could have
major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic
signal, combustion central, all types of safety device, etc.).
AUK cannot accept liability to any damage which may occur in case these AUK products
were used in the mentioned equipments without prior consultation with AUK.
KST-9063-003 4