Ref.
Description Unit Quantity Rate Amount (RM)
DOORS
Notes:
All sawn timber are to be treatedwith two coats of approved wood
presercative and rates for sawn timber are to include for above.
Rates for all timber door frames are include for mild steel holdfast
as described
Rates for all door frames shall include for filling voids of approved
materials in between framing and brickwall or concrete wall as
deemed necessary by the S.O
All fire-rated doors and door frames must be constructed to the
requirement and approval of BOMBA and rate for fire-rated doors
and door frames shall include for above.
EXTERNAL AND INTERNAL DOORS
Concrete Works
Precast Reinforced Concrete (Grade 35) Lintel Reinforced
With And Including 4 No. 12mm Diameter High Tensile
Reinforcement Bars And 6mm Diameter Mild Steel Stirrups At
150mm Centres, Bedded in Cement And Sand (1:3) Mortar
A 120mm x 200mm High Lintel M 346
(Type D1, D2, D2a, D3, D4, D5, D6, D7, FD1, FD2
B 120mm x 250mm High Lintel M 23
(Type DD1)
To Collection -
Ref. Description Unit Quantity Rate Amount (RM)
DOORS (CONT'D)
Doors And Door Frames
Plywood Flush Door
2100mm x 1580mm Pair of Plywood Double Leaf Flush
A door,including hung door on hinges and ironmongery to No 117
specification and manufacturer's detail or approved equivalent.
(Type DD1)
2100mm x 900mm Plywood Flush door,including hung door on
B hinges and ironmongery to specification and manufacturer's detail No 52
or approved equivalent.
(Type D1 and D3)
2100mm x 750mm Plywood Flush door panel cover with water
C proofing layer internally, including door on hinges and ironmongery N0 56
to specification and manufacturer's detail or approved equivalent.
(Type D2 and D2a)
2050mm x 600mm Plywood Flush door, including hung door on
D hinges and ironmongery to specification and manufacturer's detail No 16
or approved equivalent.
(Type D4)
2050mm x 900mm Plywood Flush door, including hung door on
E hinges and ironmongery to specification and manufacturer's detail No 10
or approved equivalent.
(Type D5)
Plywood Fixed Glass Flush Door
2050mm x 900mm Plywood Flush door with fix glass, including
F hung door on hinges and ironmongery to specification and N0 24
manufacturer's detail or approved equivalent.
(Type D6)
2100mm x 1000mm Plywood Flush door, including hung door on
G hinges and ironmongery to specification and manufacturer's detail No 1
or approved equivalent.
(Type D7)
Fire-Rated Hardwood Door
2050mm x 1200mm Double leaf of approved one-hour fire-rated
door, including approved door frame including hung door on hinges
H No 17
and ironmongery, to manufacture's detail and to BOMBA's
specifications.
(Type FD1)
2050mm x 900mm Single leaf of approved one-hour fire-rated
door, including approved door frame including hung door on hinges
I No 1
and ironmongery, to manufacture's detail and to BOMBA's
specifications.
(Type FD2)
To Collection -
Ref. Description Unit Quantity Rate Amount (RM)
DOORS (CONT'D)
Doors And Door Frames (Cont'd)
Metal frame Door Frame Or Manufacturer's Detail Or
Approved Equivalent Steel Door Frame, Including All
Necessay cutting, Welding, Reveting, Bending, Making
Smooth Junction, Drilling Hole, Grouting With Cement And
Sand ( 1:3) Mortar, Bolt Of Approved Type And All Necessary
Fitting And Fixing And Installed To Approved Equivalent Or
With Manufacturer's Specification.
A 1580mm x 2100mm high metal door frame No 117
(Type DD1)
B 900mm x 2100mm high metal door frame No 32
(Type D1)
C 750mm x 2100mm high metal door frame No 56
(Type D2 and D2a)
D 900mm x 2100mm high metal door frame No 20
(Type D3)
E 600mm x 2050mm high metal door frame No 16
(Type D4)
F 900mm x 2050mm high metal door frame No 35
(Type D5, D6 and FD2)
G 1000mm x 2100mm high metal door frame No 1
(Type D7)
H 1200mm x 2050mm high metal door frame No 17
(Type FD1)
Frame Welded Security Grille Including All Necessary
Welding, Butt Weld, making Smooth Junctions, Raking And
Tapering Cutting Hoisted And Installed To Approved
Equivalent Or With Manufacturer's Specification.
Mild steel sliding grille, overall size 1580mm x 2100mm high cover
I with lockset and padlock house to manufacturer's detail or No 14
appreoved equivalent.
To Collection -
Ref. Description Unit Quantity Rate Amount (RM)
DOORS (CONT'D)
Painting As Described
Painting Knoting, Stoping, Make Smooth Surface, Apply One
Coat Of Red Oxide Primer, One Coat Of oil-Modified Alkyd
Based Undercoat And Two Coat Gloss Finishing Or
Equivalent And Approved Oil-Modified Alkyd Enamel Pain On
The Following Door Timber Surface
A Surfaces of plywood flush door exceeding 300mm girth M2 1,230
B Surfaces of plywood fix glass flush door exceeding 300mm girth M2 89
C Surfaces of fire-rated hardwood door exceeding 300mm girth M2 87
Painting Knoting, Stoping, Make Smooth Surface, Apply One
Coat Of Primer, Two Undercoat And One Coat Gloss Finishing
Or Equivalent And Approved On The Following Metal Surface
D Surfaces of mild steel grille sliding door exceeding 300mm girth M2 80
Surface of metal door frame exceeding 150mm but not exceeding
E M 1,492
300mm girth.
To Collection -
Ref. Description Unit Quantity Rate Amount (RM)
To Main Summary -
Ref. Description Unit Quantity Rate
WINDOWS
Notes:
Rates for all window frames shall include for filling voids of
approved materials in between framing and brickwall or
concrete all as deemed necessary by the S.O.
Sundry labour items like drip groove, throating, rounded
coves and external angles, V-grooves and arises are not
measured separately and rates for plastering are to include
for these sundry labour items.
Concrete Works
Precast Reinforced Concrete (Grade 35) Lintel Reinforced
With And Including 4 No. 12mm Diameter High Tensile
Reinforcement Bars And 6mm Diameter Mild Steel Stirrups
At 150mm Centres, Including Plastering Painting,Bedded in
Cement And Sand (1:3) Mortar
A 120mm x 200mm high lintel
(Type W4b, M 1
B 120mm x 250mm high lintel M 1
(Type 4a
C 120mm x 300mm high lintel M 927
(Type W1, W2, W3, W4, W5, W5a, W6, W6a, W7, W8, and
W9)
To Collection
Ref. Description Unit Quantity Rate
WINDOWS (CONT'D)
Approved Aluminium Coated Finish With Frame, All
Necessary Fitting Including Waterproof Silicone
Sealant Pointing To All Appropriate Edges, Approved
Irongmongey Including All Detail And Accordance To
Manufacturer's Instructions.
Aluminium Side And Top Hung Casement Window
2400mm x 1800mm high, side and top hung aluminium
A No 142
frame casement window
(Type W1)
1800mm x 1800mm high, side and top hung aluminium
B No 2
frame casement window
(Type W2)
Aluminium Top Hung Casement Window
2400mm x 600mm high, top hung aluminium frame
C No 11
casement window
(Type W3)
1800mm x 600mm high, top hung aluminium frame
D No 1
casement window
(Type W4)
1200mm x 600mm high, top hung aluminium frame
E No 1
casement window
(Type W4a)
1200mm x 600mm high, top hung aluminium frame
F No 1
casement window
(Type W4b)
To Collection
Ref. Description Unit Quantity Rate
WINDOWS (CONT'D)
Approved In Framed Mild Steel Frame Including All
Fixing, Making Smooth All Junction, Site Welding,
Approved Irongmongey Including All Detail And
Accordance To Manufacturer's Instructions.
Mild Steel Adjustable Glass Louvres Fixed Glass Louvre
Window
2400mm x 1800mm high mild steel with adjustable glass
A No 152
louvres fixed glass louvres window
(Type W5)
2400mm x 1500mm high mild steel with adjustable glass
B No 29
louvres fixed glass louvres window
(Type W5)
2400mm x 1800mm high mild steel with adjustable glass
C No 5
louvres fixed glass louvres window
(Type W6)
1800mm x 1500mm high mild steel with adjustable glass
D No 3
louvres fixed glass louvres window
(Type W6a)
Mild Steel Obsecure Fixed Glass Louvres Window
2400mm x 600mm high mild steel with obsecure glass
E No 19
louvres fixed glass louvres window
(Type W7)
1800mm x 600mm high mild steel with obsecure glass
F No 2
louvres fixed glass louvres window
(Type W8)
1200mm x 600mm high mild steel with obsecure glass
G No 11
louvres fixed glass louvres window
(Type W9)
Frame Welded Mild Steel Security Grille Including All
Necessary Welding, Butt Weld, making Smooth
Junctions, Raking And Tapering Cutting Hoisted And
Installed To Approved Equivalent Or With
Manufacturer's Specification.
2400mm x 1800mm high Mild steel grille with openable
H panel cover with accessories to manufacturer's detail or No 59
appreoved equivalent.
(Type GW1)
To Collection
Ref. Description Unit Quantity Rate
WINDOWS (CONT'D)
Painting
Painting, Making Smooth Surface And Apply One Coat
Of Red Oxide Primer, One Coat Of Oil-Modified Alkyd
Based Undercoat And Two Finishing Coat Of Gloss
Finish Or Equivalent And Approved Oil-Modified Alkyd
Enamel Pain On The Following Metal Window Surface
A Surfaces of mild steel grille window exceeding 300mm girth M2 605
Surfaces of window frame exceeding 150mm but not
B M 3,179
exceeding 300mm girth
Glazing
6mm Thick Approved Clear Glass Casement And
Louvre Window, Grounded and Polished, Including All
Accessories To Approved Equivalent Or With
Manufacturer's Specification.
Clear glass casement window overall size exceeding 0.1m2
A M2 18
and not exceeding 0.5m2
B Clear glass casement window overall size exceeding 1.0m2 M2 620
Sheet Glass and fixing louvre window overall size
C No 8,614
exceeding 1.0m2
To Collection
To Collection
Ref. Description Unit Quantity Rate
To Main Summary
Amount (RM)
-
Amount (RM)
-
Amount (RM)
-
Amount (RM)
-
-
Amount (RM)
-
