EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.

1)
Certificate of Quality
CERTIFICATE NUMBER: 100417
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE
Designation (refer EN 12385-2 and/or ISO 17893):
942.03 32mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
542.36 2.08 1960
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
32.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
18.76
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 919.96
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
93.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
487.7
The above named person is authorised to compile the Technical File
Quan
1 X 30
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
09

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651642

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100416
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE
Designation (refer EN 12385-2 and/or ISO 17893):
942.03 32mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
542.36 2.08 1960
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
32.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
18.76
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 919.96
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
93.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
487.7
The above named person is authorised to compile the Technical File
Quan
1 X 30
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
09

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651642

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100629
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE.
Designation (refer EN 12385-2 and/or ISO 17893):
400.01 20mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
234.48 1.26 2160
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
20.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
7.96
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 390.01
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
39.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS EN12385-4 Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
210.2
The above named person is authorised to compile the Technical File
Quan
1 X 16
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
23-2

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651641

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100557
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE.
Designation (refer EN 12385-2 and/or ISO 17893):
1063.83 32mm
Rope Grade:
Date of test:
2160
Rope number:
Other Information Q6207
Product code:
Nominal Rope Diameter (mm):
32.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
20.20
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 990.47
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
101
Product Standard: Adam Jeays - Rope Design System Specialist
BS EN12385-4 Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
534.1
The above named person is authorised to compile the Technical File
Quan
1 X 45
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +20m of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
23-

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 620852

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100556
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE.
Designation (refer EN 12385-2 and/or ISO 17893):
1063.83 32mm
Rope Grade:
Date of test:
2160
Rope number:
Other Information Q6207
Product code:
Nominal Rope Diameter (mm):
32.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
20.20
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 990.47
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
101
Product Standard: Adam Jeays - Rope Design System Specialist
BS EN12385-4 Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
534.1
The above named person is authorised to compile the Technical File
Quan
1 X 45
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +20m of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
23-

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 620852

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100912
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE.
Designation (refer EN 12385-2 and/or ISO 17893):
400.01 20mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
234.48 1.26 2160
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
20.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
7.96
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 390.01
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
39.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS EN12385-4 Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
210.2
The above named person is authorised to compile the Technical File
Quan
1 X 15
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
23-2

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651641

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100911
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE.
Designation (refer EN 12385-2 and/or ISO 17893):
400.01 20mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
234.48 1.26 2160
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
20.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
7.96
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 390.01
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
39.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS EN12385-4 Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
210.2
The above named person is authorised to compile the Technical File
Quan
1 X 15
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
23-2

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651641

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100419
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE
Designation (refer EN 12385-2 and/or ISO 17893):
942.03 32mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
542.36 2.08 1960
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
32.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
18.76
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 919.96
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
93.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
487.7
The above named person is authorised to compile the Technical File
Quan
1 X 33
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
09

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651642

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100418
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE
Designation (refer EN 12385-2 and/or ISO 17893):
942.03 32mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
542.36 2.08 1960
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
32.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
18.76
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 919.96
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
93.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
487.7
The above named person is authorised to compile the Technical File
Quan
1 X 33
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
09

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651642

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100403
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE
Designation (refer EN 12385-2 and/or ISO 17893):
942.03 32mm
Rope Grade: Wire Area(mm²): Max Wire Diameter(mm):
Date of test:
542.36 2.08 1960
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
32.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
18.76
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 919.96
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
93.8
Product Standard: Adam Jeays - Rope Design System Specialist
BS Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
487.7
The above named person is authorised to compile the Technical File
Quan
1 X 27
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
09

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 651642

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO
EC Declaration of Conformity and Manufacturer's Certificate for Rope only (EN 10204 type 3.1)
Certificate of Quality
CERTIFICATE NUMBER: 100592
PURCHASER NAME: MANUFACTURER NAME:
BRIDON SINGAPORE (PTE) LTD. BRIDO
ADDRESS: ADDRESS:
Temasek Boulevard Gut Road
#29-03 Suntec City Tower 2 Wallsend
SINGAPORE Newcastle
038989 NE28 6TT
Singapore United Kingdom

Customer Order Number: Bridon Order Number:

2020237208 390070

Rope Details Test Results

Brand Name:
BRIDO
ROPE
Designation (refer EN 12385-2 and/or ISO 17893):
573.98 24mm
Rope Grade:
Date of test:
1960
Rope number:
Other Information Q6208
Product code:
Nominal Rope Diameter (mm):
24.00
Nominal Rope Diameter Tolerance(%):
-0 / +5%
11.60
Minimum breaking force (Fmin), kN:
* It is the responsibility of the manufacturer or designer of the installation, equipment or appliance to establish the 568.79
'coefficient of utilisation or safety factor/factor of safety/design factor for the rope. If the rope is to be used at a
different 'coefficient of utilisation' to the one above, it should be re-rated by a competent person. Read annex A of
EN 12385-3 Steel wire ropes - Part 3: 'Information for use and maintenance' before using this product and visit our Minim
web site [Link] for more product safety information.
58
Product Standard: Adam Jeays - Rope Design System Specialist
BS BS EN12385-4, API 9A Bridon International Limited
Technical Centre, Carr Hill, Balby, Doncaster, South Yorkshire,
DN4 8DG, United Kingdom Appro
323.6
The above named person is authorised to compile the Technical File
Quan
1 X 38
Declaration of Compliance
Length Tolerance(m, mm or %): I certify that the product described herein complies with the terms
-0 / +5% of the order
RCN (refer ISO 4309 for discard criteria of crane ropes): Name:
23-

Quality System Certification: Date:

EN ISO

Additional Comments:
MATERIAL NUMBER: 613685

EC Declaration of Conformity

We, Bridon International Limited (Registered in England & Wales Number 416671 | R
Queensway, Birmingham, West Midlands B4 6AT, United Kingdom), hereby declare t
EC Machinery Directive 2006/42/EC. This Declaration becomes invalid if the product
if the 'information for use and maintenance' (EN 12385-3) and 'care, maintenance, ins

This Certificate is the standard international format and c

by the International Labour Office in accordance with ILO