Scribd
Upload
7K views1 page

WiFi Coverage Management

This document provides instructions for configuring Wi-Fi coverage management on a device. It allows specifying an SSID for a Wi-Fi network and adding scanned external access points to the network. This creates a single Wi-Fi network with the external access points and device, allowing wireless devices to seamlessly access the combined network. The document includes settings for 2.4GHz and 5GHz parameters, as well as options for automatic synchronization of Wi-Fi parameters to newly detected external access points.

Uploaded by

Ya Sin Michael Moindzee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7K views1 page

WiFi Coverage Management

This document provides instructions for configuring Wi-Fi coverage management on a device. It allows specifying an SSID for a Wi-Fi network and adding scanned external access points to the network. This creates a single Wi-Fi network with the external access points and device, allowing wireless devices to seamlessly access the combined network. The document includes settings for 2.4GHz and 5GHz parameters, as well as options for automatic synchronization of Wi-Fi parameters to newly detected external access points.

Uploaded by

Ya Sin Michael Moindzee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • WiFi Coverage Management

HG8245H5 Fast Setting telecomadmin Logout

WAN
WiFi Coverage Management
LAN On this page, you can specify the SSID for a Wi-Fi network and add the scanned external AP to this Wi-Fi network. Then,
the external AP and this device construct an entire Wi-Fi network and your wireless devices can seamlessly access this
network.
Security

Enable WiFi coverage (taking effect after the ONT resets)


Route Wi-Fi Parameter Configuration Wi-Fi Network Management

Forward Rules Configure 2.4G Parameters Go to the WLAN Basic Configuration web page
Broadcast Authentication and
SSID Name Password
Application SSID Encryption Mode

MRANI WIFI Enabled WPA-WPA2-Personal •••••••• Hide


WLAN
Configure 5G Parameters New Modify Delete

WLAN Basic
Broadcast Authentication and
SSID Name Password
SSID Encryption Mode
WLAN Advanced MRANI WIFI 5GHZ Enabled OPEN --

Automatic WiFi Shu... Select a policy to synchronize Wi-Fi parameters to the newly detected external AP.
Do not enable automatic synchronization.
WiFi Coverage Specify the SSID for automatic
MRANI WIFI(2.4G) MRANI WIFI 5GHZ(5G)
synchronization.
Voice Enable best-effort synchronization according
to AP capabilities.

System Management
External AP List

Maintenance Diagno... Device Model Serial Number Status Online Duration Configuration Status

-- -- -- -- --

You might also like