Scribd
Upload
151 views2 pages

Equipment Inspection Checklist

This document appears to be an inspection checklist for lifting equipment. It lists the owner, manufacturer, serial number, and other details of the equipment being inspected. It then lists criteria for inspecting items like the man rider hoist, wire rope, brakes system, and mechanical system. For each criteria, inspectors will check if it passes, fails, or is not applicable, and leave any comments. The overall pass or fail result will then be noted.

Uploaded by

engmuhmud
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
151 views2 pages

Equipment Inspection Checklist

This document appears to be an inspection checklist for lifting equipment. It lists the owner, manufacturer, serial number, and other details of the equipment being inspected. It then lists criteria for inspecting items like the man rider hoist, wire rope, brakes system, and mechanical system. For each criteria, inspectors will check if it passes, fails, or is not applicable, and leave any comments. The overall pass or fail result will then be noted.

Uploaded by

engmuhmud
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Equipment Owner Type / Model

Manufacturer Serial
Manufacture Date Capacity / SWL
SWIM-Sec.No.38 Standard Lifting Procedure
Reference Specification
ASME B30.7

A R
Final Result
(A: Accept / R: Reject)

RESULTS
Item Inspection Criteria
Pass Fail N/A Comments

1 General Requirements

1.1 Equipment documents are available


1.2 Previous inspection reports are checked
Serial number and Rated Load are clearly marked or
1.3
tagged
1.4 Manufacturer’s name and equipment data
The examination is to be carried out in adequate
1.5
lighting
2 Man Rider Hoist

Check that the winch is securely bolted to a firm


2.1
foundation with adequate anchorage
2.2 Supporting structure and foundation
Check for missing, loose, damaged or corroded fixing
2.3
bolts
2.4 If the base is welded, check for cracked welds
Check the winch frame for distortion, corrosion and
2.5
any missing or damaged guards
2.6 Clutch engagement working condition
Check the operating lever or push buttons for correct
2.7
operation
Check the operating lever that it should return to
2.8 neutral when they are released and the direction of
their operation should be clearly marked on the winch
2.9 Check for cracks at bends or changes in section
The rope drum is to be checked for any damage and
2.10
that the flanges are not chipped or cracked
Operate the winch and listen for excessive noise and
2.11
vibration particularly when the winch is being lowered
3 Wire Rope

3.1 Manufacturer’s name and data


Ensure SWL and identification number is legible and
3.2
is cross-referenced on the proof load certificate
Check type of wire rope if it is rotating-resistance wire
3.3
rope
The thimble is to be checked for distortion, wear and
3.4
closing of the thimble
The ferrule is to be checked for cracks, severe
3.5
crushing or abrasion. Also check to see that the wires
are not pulling-out of the ferrule
Check the whole length of the wire rope including
where it terminates on the drum for broken wires,
3.6 excessive wear, kinks, unstranding, birdcaging, main
strand displacement, core protrusion, lack of
lubrication, heat damage and corrosion
Check the rope diameter for deviation from nominal
3.7
diameter
The rope anchorage is to be checked to see that the
rope has not been pulled through or slipped on the
3.8
anchorage and that the bolts are not loose, corroded,
damaged or missing
4 Brakes System

4.1 Brakes mechanism are operable


4.2 Brakes assemblies has no damages
4.3 Brakes tubing and mechanical linkage no leak
Manual brakes are to be checked for security and
4.4
wear
5 Mechanical System

5.1 Drum assemblies shall be operational


5.2 Drum capacity shall be recommended size
5.3 Rope shall remain on the drum and full wrap
5.4 Drum brakes is operable
Make sure that the air filter and water trap is fitted to
5.6
the supply end of the winch

REMARKS

You might also like