Altai A3-Ei Dual-band 3x3 802.

11ac WiFi AP
Outdoor 802.11n/ac, Built-in 2.4 GHz and 5 GHz Sector Antennas

Altai A3-Ei Outdoor 802.11ac 3x3 Access Point Altai A3-Ei for Dual-band Wireless Access
The Altai A3-Ei Dual-band 3x3 WiFi Access Point is The A3-Ei can be used for wireless broadband
designed to be used in Altai Super WiFi systems to access for both the residential users and
provide high capacity 2.4 GHz and 5 GHz dual-band commercial customers. It supports concurrent 2.4
dual-concurrent access coverage for both outdoor GHz and 5 GHz dual-band operations, and is a
and indoor areas, and to increase system capacity, cost effective and flexible solution which supports
extend coverage, fill-in areas of low or blocked long access range with an Altai C1n or C1an CPE
signals caused by obstructions. It is capable of for 2.4 GHz and 5 GHz operation respectively.
providing the highest possible data throughput and
capacity that the 802.11ac 3x3 3-stream MIMO
standards can offer.

Extra High Capacity PTP/PTMP Bridging

The A3-Ei supports up to 1.3 Gbps data rate high
Super Dual-band Coverage
capacity PTP/PTMP bridging, fulfilling extra high
3 km (2.4 GHz) throughput, high user capacity and fully IP-67
Max. LOS CPE
2 km (5 GHz) weatherproof bridging requirements. This is
1 km (2.4 GHz) commonly used for hub site bridging such as
Max. LOS Smartphones
800 m (5 GHz) campus network, city network or surveillance.
Max. LOS Bridge 11 km (5 GHz)
Max. Data Rate 450 + 1300 Mbps

Altai A3-Ei for Dual-band Micro Coverage

The A3-Ei has both a high capacity 2.4 GHz (3x3:3
802.11b/g/n) radio and a 5 GHz (3x3:3 802.11a/n/ac)
radio which can be operated at the same time for
2.4 GHz and 5 GHz dual-band dual-concurrent
access coverage. The dual-band operations not only
provide the highest capacity up to 1.75 Gbps but
also perform better in the less interfered 5 GHz
frequency band.

As an integral part of our Super WiFi network infrastructure, key benefits of the Altai A3-Ei include:
 Multi-operating modes allowed: AP, bridge,  2.4 GHz and 5 GHz dual-band dual concurrent
repeater mode or CPE access
 3x3:3 MIMO for both 2.4 GHz (802.11b/g/n) and  IP-67 rated carrier grade dual-band AP for
5 GHz (802.11a/n/ac) radios both outdoor and indoor applications
 Built-in 2.4 GHz and 5 GHz 3x3 spatial polarized  Fill-in coverage area in challenging RF
high gain sector antennas environment
 High capacity 1300 Mbps in 5 GHz and 450  Light weight with built-in lightning protection
Mbps in 2.4 GHz
 Easy installation & web-based management

Altai Technologies Ltd. All rights reserved

 Altai A3-Ei Dual-band 3x3 802.11ac WiFi AP
Outdoor 802.11n/ac, Built-in 2.4 GHz and 5 GHz Sector Antennas

Wireless Interface Security

802.11b/g/n (3x3:3) Radio • Authentication – Open system, Shared key, WPA/ WPA-
• Operating Mode Access Point/CPE/Bridge/ PSK, WPA2/ WPA2-PSK, 802.1x (EAP-PEAP/ TLS/ TTLS/ SIM/ AKA)
Repeater • Encryption – WEP, TKIP, AES
• Standard IEEE 802.11b/g/n • Inter/ Intra-client Isolation
• Operating Frequency 2.400 – 2.484 GHz (Ch 1-13) • MAC-based Access Control (White/ Black List)
• Transmit Power 30 dBm (Max.) • RADIUS
25 dBm (Per Chain) • Active directory
• Receiver Sensitivity (Typical) • Firewall*
802.11b 11 Mbps -90 dBm; 1 Mbps -100 dBm • WIPS*
802.11g 54 Mbps -79 dBm; 6 Mbps -92 dBm •
Management
802.11n HT20 -92 dBm; HT40 -88 dBm
802.11a/n/ac (3x3:3) Radio • Cloud or Server-based Management by AltaiCare
• Operating Mode Access Point/CPE/Bridge/ • Controller-based Management by Access Controller
Repeater • Web User Interface
• Standard IEEE 802.11a/n/ac • Command Line Interface (SSH)
• Operating Frequency 5.150 – 5.350 GHz • SNMP v1/ v2c / v3*
5.470 – 5.725 GHz • MIB2/ IF-MIB/ Altai Enterprise MIB
5.725 – 5.850 GHz • Syslog
• Transmit Power 30 dBm (Max.) • Auto Channel Selection and TX Power Control
25 dBm (Per Chain) • Spectral Analysis*
• Receiver Sensitivity (Typical) • KPI Monitoring*
802.11a 54 Mbps -79 dBm; 6 Mbps -93 dBm • Client OS Detection*
802.11n HT20 -94 dBm; HT40 -90 dBm Physical Specification
802.11ac VHT20 -93 dBm; VHT40 -90 dBm;
VHT80 -87 dBm • Dimension 491 x 221 x 73mm
For both 2.4 and 5 GHz • Weight 2.1 kg (Unit Weight) /
• 32 SSID (Max. 16 SSID per Radio) 2.5 kg (With Mounting Kit)
• 802.11h*, 802.11k*, 802.11r*, 802.11v*, 802.11w* • Mounting Pole or Wall-mounted
• Hotspot 2.0 • Network Interface 10/100/1000 Mbps
• Altai AirFi™ Throughput Optimization Ethernet Port
• Band Steering Power
• Supply
• WMM (802.11e) • Power Supply 802.3at PoE PD, 56V Passive
Antenna PoE PD or -48V DC PoE Injector
2.4 GHz Antenna • Power Consumption 10 W (Typical) / 25 W (Max.)
• Built-in Antenna 12 dBi Sector
• Frequency 2.4 – 2.5 GHz Environmental Specification
• Polarization 3x3 MIMO Spatial Polarized
• Operating Temperature -40 °C to +60 °C (Ambient)
• Horizontal Beamwidth 60°(-3 dB)
0 °C to +40 °C (PoE Injector)
• Vertical Beamwidth 25°(-3 dB)
• Storage Temperature -40 °C to +80 °C
• VSWR 2 (Max.)
• Humidity 5 to 100% (Condensing)
• Impedance 50 Ω
• Lightning Protection EN 61000-4-5
• Front-to-back Ratio -25 dB (Max.)
• Wind Loading Up to 216 km/h (134 mph)
• Isolation Between Ports 18 dB (Min.)
• Weatherproof IP67 Compliant
5 GHz Antenna
• Built-in Antenna 13 dBi Sector Certification
• Frequency 5.150 – 5.875 GHz
• Polarization 3x3 MIMO Spatial Polarized • FCC / CE / SRRC / Others*
• Horizontal Beamwidth 80°(-3 dB)
• Vertical Beamwidth 12°(-3 dB)
• VSWR 2 (Max.) Product Ordering Information
• Impedance 50 Ω
• Front-to-back Ratio -25 dB (Max.) Standard Package
• Isolation Between Ports 18 dB (Min.)
 A3-Ei Dual-band 3x3 802.11ac WiFi AP with Built-in 2.4 GHz
and 5 GHz Sector Antennas (Model No.: WA3311NAC-E)
Networking
•  PoE Injector and Mounting Accessories
• Switch (Bridge) and Gateway Mode Contact Us
• IPv4/ IPv6 Dual-stack • Email: [email protected]
• NAT
• DHCP Client/ Server A3Ei-PB-170302
* Will be available in future.
• PPPoE Client The coverage range will be varied depending on NLOS and interference conditions.
• VPN (IPsec)* The transmit power may be varied according to country regulation.
• VLAN Although Altai has attempted to provide accurate information in these materials, Altai
• Bandwidth Control Per VAP/ Client assumes no legal liability for the accuracy and completeness of the information. All
• Multicast Rate Filter/IGMP Snooping specifications are subject to change without notice.
•
Altai Technologies Ltd. All rights reserved