Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,

KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 1 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Permanent Facility

1 ELECTRO- AC Current (40 Hz to 1 1 A to 3 A 0.2% to 0.4% Using 6 1/2 Digit

TECHNICAL- kHz) Multimeter by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Measure)

2 ELECTRO- AC Current (40 Hz to 1 10 mA to 1 A 0.5% to 0.2% Using 6 1/2 Digit

TECHNICAL- kHz) Multimeter by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Measure)

3 ELECTRO- AC Current (40 Hz to 3 A to 10 A 0.4% to 0.23% Using 6 1/2 Digit

TECHNICAL- 1kHz) Multimeter by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Measure)

4 ELECTRO- AC Current (50 Hz) 10 A to 30 A 0.23% to 0.4% Using 6 1/2 Digit

TECHNICAL- Multimeter & Current
ALTERNATING Shunt by Direct Method
CURRENT (< 1 GHZ)
(Measure)

5 ELECTRO- AC Current ( 45 Hz to 1 3 A to 10 A 0.21% to 0.23% Using Multi Product

TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

6 ELECTRO- AC Current ( 45 Hz to 1 0.7% to 0.26% Using Multi Product

30 µA to 330 µA
TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 2 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
7 ELECTRO- AC Current (45 Hz to 1 10 A to 20 A 0.23% Using Multi Product
TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

8 ELECTRO- AC Current (45 Hz to 1 0.26% to 0.53% Using Multi Product

330 µA to 33 mA
TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

9 ELECTRO- AC Current (45 Hz to 1 330 mA to 3 A 0.24% to 0.21% Using Multi Product

TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

10 ELECTRO- AC Current (45 Hz to 33 mA to 330 mA 0.36% to 0.24% Using Multi Product

TECHNICAL- 1kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

11 ELECTRO- AC Current (50 Hz) 20 A to 1000 A 0.2% to 0.93% Using Multi Product
TECHNICAL- Calibrator Fluke 5502A
ALTERNATING & Current Coil by Direct
CURRENT (< 1 GHZ) Method
(Source)

12 ELECTRO- DC Current 1 mA to 100 mA 0.02% to 0.02% Using Multi Product

TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

13 ELECTRO- DC Current 10 A to 20 A 0.08% to 0.13% Using Multi Product

TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 3 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
14 ELECTRO- DC Current 100 mA to 10 A 0.76% to 0.76% Using Multi Product
TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

15 ELECTRO- DC Current 20 A to 1000 A 0.13% to 0.33% Using Multi Product

TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) & Current Coil by Direct
Method

16 ELECTRO- DC Current 0.8% to 0.17% Using Multi Product

33 µA to 1 mA
TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

17 ELECTRO- AC Current (50 Hz) 30 A to 300 A 0.3A to 1.6A Using Current Shunt
TECHNICAL- with DMM by Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

18 ELECTRO- AC Voltage (40 Hz to 1 V to 750 V 0.11% Using 6 1/2 digit

TECHNICAL- 1kHz ) multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

19 ELECTRO- AC Voltage (40Hz to 10 mV to 1 V 0.5% to 0.11% Using 6 1/2 digit

TECHNICAL- 1kHz) multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

20 ELECTRO- AC Voltage (50 Hz) 1 kV to 28 kV 3% Using HV Probe with

TECHNICAL- DMM by Direct Method
ELECTRICAL
EQUIPMENT
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 4 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
21 ELECTRO- DC Current 1 A to 3 A 0.35% to 0.17% Using 6 1/2 digit
TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

22 ELECTRO- DC Current 0.35% to 0.13% Using 6 1/2 Digit

10 µA to 1 A
TECHNICAL- Multimeter by Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

23 ELECTRO- DC Current 10 A to 30 A 0.19% to 0.35% Using 6 1/2 digit

TECHNICAL- multimeter & current
ELECTRICAL shunt by direct method
EQUIPMENT
(Measure)

24 ELECTRO- DC Current 3 A to 10 A 0.22% to 0.19% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

25 ELECTRO- DC Current 30 A to 300 A 0.19A to 2.30A Using Current shunt

TECHNICAL- with DMM by direct
ELECTRICAL method
EQUIPMENT
(Measure)

26 ELECTRO- DC Voltage 1 kV to 40 kV 1.37% to 3.0% Using HV Probe with

TECHNICAL- DMM by direct method.
ELECTRICAL
EQUIPMENT
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 5 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
27 ELECTRO- DC Voltage 1 mV to 10 mV 0.42% to 0.04% Using 6 1/2 digit
TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

28 ELECTRO- DC Voltage 10 mV to 10 V 0.42% to 0.009% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

29 ELECTRO- DC Voltage 10 V to 1000 V 0.009% to 0.013% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

30 ELECTRO- Resistance 1 ohm to 100 Mohm 0.062% to 0.94% Using 6 1/2 digit
TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

31 ELECTRO- Timer, Stop Watch 1 s to 24 hour 0.12s to 100s Using Digital Timer by
TECHNICAL- comparison method
ELECTRICAL
EQUIPMENT
(Measure)

32 ELECTRO- AC Voltage (45 Hz to 3 mV to 30 mV 1% to 0.25% Using Multi Product

TECHNICAL- 10 kHz) Calibrator Fluke 5502A
ELECTRICAL by Direct Method
EQUIPMENT (Source)

33 ELECTRO- AC Voltage (45 Hz to 30 mV to 300 mV 0.25% to 0.07% Using Multi Product

TECHNICAL- 10 kHz) Calibrator Fluke 5502A
ELECTRICAL by Direct Method
EQUIPMENT (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 6 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
34 ELECTRO- AC Voltage (45 Hz to 300 mV to 3 V 0.07% to 0.065% Using Multi Product
TECHNICAL- 10 kHz) Calibrator Fluke 5502A
ELECTRICAL by Direct Method
EQUIPMENT (Source)

35 ELECTRO- AC Voltage (45Hz to 10 3 V to 330 V 0.065% to 0.12% Using Multi product

TECHNICAL- kHz) calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

36 ELECTRO- AC Voltage (45Hz to 330 V to 1000 V 0.11% to 0.06% Using Multi product
TECHNICAL- 10kHz) calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

37 ELECTRO- Capacitance 1 nF to 100 mF 0.6% to 1.4% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

38 ELECTRO- DC Resistance 100 ohm to 1000 0.6% to 1.7% Using Multi product
TECHNICAL- Mohm calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

39 ELECTRO- DC Resistance 2 ohm to 100 ohm 0.13% to 0.6% Using Multi product
TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

40 ELECTRO- DC Voltage 1 mV to 10 mV 0.38% to 0.05% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

41 ELECTRO- DC Voltage 10 mV to 100 mV 0.05% to 0.01% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 7 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
42 ELECTRO- DC Voltage 100 V to 1000 V 0.01% to 0.01% Using Multi product
TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

43 ELECTRO- Frequency 10 Hz to 1 MHz 0.012% to 0.0001% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

44 ELECTRO- Oscilloscope 50 k Hz to 200 MHz 2.3% to 7% Using Multi product

TECHNICAL- Bandwidth calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

45 ELECTRO- Oscilloscope Time 2 ns to 1 s 0.03% to 0.22% using Multi product

TECHNICAL- Marker calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

46 ELECTRO- Oscilloscope 10 mV to 40 V 0.67% to 0.45% Using 6 1/2 multimeter

TECHNICAL- voltage(amplitude) DC & Multi product
ELECTRICAL signal calibrator Fluke 5502A
EQUIPMENT (Source)

47 ELECTRO- Oscilloscope 10 mV to 40 V 0.92% to 0.54% Using 6 1/2 multimeter

TECHNICAL- voltage(amplitude) & Multi product
ELECTRICAL peak to peak calibrator Fluke 5502A
EQUIPMENT (Source)

48 ELECTRO- 'K' type thermocouple -100 °C to 1350 °C 0.47°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 8 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
49 ELECTRO- 'B' type thermocouple 600 °C to 1800 °C 0.65°C Using Multi product
TECHNICAL- calibrator Fluke 5502A
TEMPERATURE and 6.5 digit
SIMULATION mumltimeter by direct
(Source,Measure) method

50 ELECTRO- 'E' type thermocouple -100 °C to 1000 °C 0.58°C Using Multi product
TECHNICAL- calibrator Fluke 5502A
TEMPERATURE and 6.5 digit
SIMULATION mumltimeter by direct
(Source,Measure) method

51 ELECTRO- 'J' type thermocouple -100 °C to 1200 °C 0.61°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

52 ELECTRO- 'N' type thermocouple -100 °C to 1300 °C 0.51°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

53 ELECTRO- 'R' type thermocouple 0 °C to 1750 °C 0.67°C Using 6 1/2 multimeter

TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

54 ELECTRO- RTD -100 °C to 800 °C 0.46°C Using 6 1/2 multimeter

TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 9 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
55 ELECTRO- 'S' type thermocouple 0 °C to 1750 °C 0.55°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

56 ELECTRO- 'T' type thermocouple -100 °C to 400 °C 0.49°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

57 MECHANICAL- Tachometer, RPM 12 rpm to 50000 rpm 1.52% to 0.02% Using RPM Source,
ACCELERATION AND indicator with sensors Tachometer by
SPEED Comparison Method as
per Sanas TR 45-01

58 MECHANICAL- Sound Level Meter 94 dBA & 114 dBA @ 1 0.82dBA Using Sound Level
ACOUSTICS kHz Calibrator as per IS
15575

59 MECHANICAL- Bore Gauge Traverse up to 1 mm 1.8um Using Dial Calibration

DIMENSION (BASIC Transmission (L.C.: 1 Tester by Comparison
MEASURING um)(Dia. Range 10 mm Method UC/CAL/102
INSTRUMENT, to 450 mm) 01 Dec 15
GAUGE ETC.)

60 MECHANICAL- Caliper (Vernier, Up to 600 mm 10.1um Using Gr '0' Gauge

DIMENSION (BASIC Digital, Dial)L.C. : 10 Block/Long Gauge
MEASURING um Block by Comparison
INSTRUMENT, Method IS 3651
GAUGE ETC.)

61 MECHANICAL- Coating Thickness Up to 1000 um 2um Using thickness foils by

DIMENSION (BASIC Gauge (L.C.: 1 um) comparison method
MEASURING (UC/CAL/114 dated 1
INSTRUMENT, Dec. 15)
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 10 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
62 MECHANICAL- Depth Caliper (L.C.: 10 Up to 300 mm 7.3um Using Gr '0' Gauge
DIMENSION (BASIC um) Block by Comparison
MEASURING Method IS 4213
INSTRUMENT,
GAUGE ETC.)

63 MECHANICAL- Depth Micrometer Up to 300 mm 8um Using Gr '0' Gauge

DIMENSION (BASIC (L.C.: 10 um) Block by Comparison
MEASURING Method IS 2967
INSTRUMENT,
GAUGE ETC.)

64 MECHANICAL- External Micrometer: Up to 300 mm 2.8um Using Gr '0' Gauge

DIMENSION (BASIC Mechanical, Digital, Block / Long Gauge
MEASURING Dial(L.C.: 1 um) Block By Comparison
INSTRUMENT, Method IS 2967
GAUGE ETC.)

65 MECHANICAL- External Micrometer: Up to 1000 mm 8.6um Using Gr '0' Gauge

DIMENSION (BASIC Mechanical, Digital, Block / Long Gauge
MEASURING Dial(L.C.: 10 um) Block By Comparison
INSTRUMENT, Method IS 2967
GAUGE ETC.)

66 MECHANICAL- Feeler Gauge Up to 1 mm 2.8um Using Digital

DIMENSION (BASIC micrometer by
MEASURING Comparison method IS
INSTRUMENT, 3179
GAUGE ETC.)

67 MECHANICAL- Height Gauge: Up to 600 mm 9um Using Gr '0' Gauge

DIMENSION (BASIC Vernier/Dial/Digital(L.C. Block/Long Gauge
MEASURING : 10 um) Block By Comparison
INSTRUMENT, Method IS 2921
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 11 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
68 MECHANICAL- Lever Type Dial Gauge 0 to 0.14 mm 2um Using dial calibration
DIMENSION (BASIC (L.C.: 1 um) tester by Comparison
MEASURING Method IS 11498
INSTRUMENT,
GAUGE ETC.)

69 MECHANICAL- Lever Type Dial Gauge 0 to 1 mm 6.1um Using Dial calibration

DIMENSION (BASIC (L.C.: 10 um) tester by Comparison
MEASURING Method IS 11498
INSTRUMENT,
GAUGE ETC.)

70 MECHANICAL- Measuring Pins Up to 20 mm 0.8um Using FCDM by

DIMENSION (BASIC Comparison Method IS
MEASURING 11103
INSTRUMENT,
GAUGE ETC.)

71 MECHANICAL- Micrometer Head (L.C.: 0 to 25 mm 1.5um Using Sylvac electronic

DIMENSION (BASIC 1 um) Probe by Comparison
MEASURING Method IS 2966
INSTRUMENT,
GAUGE ETC.)

72 MECHANICAL- Plain Plug Gauge 3 mm to 100 mm 2.4um Using FCDM by

DIMENSION (BASIC Comparison Method IS
MEASURING 3455
INSTRUMENT,
GAUGE ETC.)

73 MECHANICAL- Plunger Type Dial 0 to 12.5 mm 2um Using dial calibration

DIMENSION (BASIC Gauge, LVDT (L.C.: 1 tester Comparison
MEASURING um) Method IS 2092
INSTRUMENT,
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 12 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
74 MECHANICAL- Plunger Type Dial 0 to 25 mm 7um using calibration tester
DIMENSION (BASIC Gauge, LVDT (L.C.: 10 and slip gauge by
MEASURING um) Comparison Method IS
INSTRUMENT, 2092
GAUGE ETC.)

75 MECHANICAL- Setting Rods 25 mm to 975 mm 5um Using Gr '0' Gauge

DIMENSION (BASIC Block, Electronic Probe
MEASURING by Comparison Method
INSTRUMENT, (UC/CAL/101 dated 1
GAUGE ETC.) Dec. 15)

76 MECHANICAL- Snap Gauge 3 mm to 200 mm 2.5um Using Gr '0' Gauge

DIMENSION (BASIC Block by Comparison
MEASURING method IS 7876
INSTRUMENT,
GAUGE ETC.)

77 MECHANICAL- Stick Micrometer (L.C.: 5 mm to 300 mm 6.2um Using Gr '0' Gauge

DIMENSION (BASIC 10 um) Block With Accessories
MEASURING by Comparison Method
INSTRUMENT, IS 2966
GAUGE ETC.)

78 MECHANICAL- Thread Plug Gauge 3 mm to 100 mm 2.5um Using FCDM by

DIMENSION (BASIC (Major & Effective Comparison Method IS
MEASURING Diameter) 2334
INSTRUMENT,
GAUGE ETC.)

79 MECHANICAL- Two Leg / Pistol Up to 150 mm 9um Using Gr '0' Gauge

DIMENSION (BASIC Caliper: Inside & Block by Comparison
MEASURING OutsideGroove (L.C.: Method IS 2092
INSTRUMENT, 10 um)
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 13 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
80 MECHANICAL- V-Block (Parallelism & Up to 200 mm 8.5um Using Test Mandrel &
DIMENSION (BASIC Symmetry) Dial Indicator
MEASURING
INSTRUMENT,
GAUGE ETC.)

81 MECHANICAL- Push Pull Gauge / 10 N to 1000 N 0.57% Using Newton Weights

MOBILE FORCE Force Gauge as per VDI/VDE 2624
MEASURING SYSTEM

82 MECHANICAL- Pressure Gauge- 0 bar to 700 bar 0.43bar Using Pressure

PRESSURE Hydraulic (Digital / Calibrator by
INDICATING DEVICES Analog Pressure Comparison Method as
Gauge, Pressure per DKD R 6-1
Transducer / Sensor /
Transmitter / Switch
with or without Indicator
/ Calibrator / Controller)

83 MECHANICAL- Pressure Gauge- 0 bar to 30 bar 0.011bar Using Pressure

PRESSURE Pneumatic (Digital / Calibrator by
INDICATING DEVICES Analog Pressure Comparison Method as
Gauge, Pressure per DKD R 6-1
Transducer / Sensor /
Transmitter / Switch
with or without Indicator
/ Calibrator / Controller,
Manometer)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 14 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
84 MECHANICAL- Vacuum Gauge / - 0.85 bar to 0 bar 0.0009bar Using Pressure
PRESSURE Negative Pressure Calibrator by
INDICATING DEVICES Gauge (Digital / Analog Comparison Method as
Vacuum Gauge, per DKD R 6-2
Vacuum Transducer /
Sensor / Transmitter /
Switch with or without
Indicator / Calibrator /
Controller)

85 MECHANICAL- Glasswares (Pipette, 1 ml to 10 ml 0.006ml Using Weighing

VOLUME Burette, Measuring Balance (readability
Cylinder, Volumetric 0.01 mg, 0.1 mg, 1 mg)
Flask) and Distilled Water by
Gravimetric Method as
per ISO 4787

86 MECHANICAL- Glasswares (Pipette, 10 ml to 100 ml 0.022ml Using Weighing

VOLUME Burette, Measuring Balance (readability 0.1
Cylinder, Volumetric mg, 1 mg, 10 mg) and
Flask) Distilled Water by
Gravimetric method as
per ISO 4787

87 MECHANICAL- Glasswares (Pipette, 100 ml to 1000 ml 0.08ml Using Weighing

VOLUME Burette, Measuring Balance (readability 0.1
Cylinder, Volumetric mg, 1 mg, 10 mg) and
Flask) Distilled Water by
Gravimetric method as
per ISO 4787

88 MECHANICAL- Micro Pipettes 10 µl to 100 µl 0.3µl Using Semi Micro

VOLUME Balance (readability
0.01 mg) and Distilled
Water by Gravimetric
Method as per ISO
8655

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 15 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
89 MECHANICAL- Micro Pipettes 100 µl to 1000 µl 0.3µl Using Semi Micro
VOLUME Balance (readability
0.01 mg) and Distilled
Water by Gravimetric
Method as per ISO
8655

90 MECHANICAL- Micro Pipettes 1000 µl to 5000 µl 9µl Using Semi Micro

VOLUME Balance (readability
0.01 mg) and Distilled
Water by Gravimetric
Method as per ISO
8655

91 MECHANICAL- Weights 1g 0.02mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

92 MECHANICAL- Weights 1 kg 10mg using F1 class weights

WEIGHTS & Electronic balance by
substitution method as
per OIML R-111

93 MECHANICAL- Weights 1 mg 0.01mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

94 MECHANICAL- Weights 10 g 0.03mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

95 MECHANICAL- Weights 10 kg 20mg using F1 class weights

WEIGHTS & Electronic balance by
substitution method as
per OIML R-111

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 16 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
96 MECHANICAL- Weights 10 mg 0.01mg using E1 class weights
WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

97 MECHANICAL- Weights 100 g 0.2mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

98 MECHANICAL- Weights 100 mg 0.02mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

99 MECHANICAL- Weights 2g 0.02mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

100 MECHANICAL- Weights 2 kg 10mg using F1 class weights

WEIGHTS & Electronic balance by
substitution method as
per OIML R-111

101 MECHANICAL- Weights 2 mg 0.01mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

102 MECHANICAL- Weights 20 g 0.03mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

103 MECHANICAL- Weights 20 kg 200mg using F1 class weights

WEIGHTS & Electronic balance by
substitution method as
per OIML R-111

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 17 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
104 MECHANICAL- Weights 20 mg 0.02mg using E1 class weights
WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

105 MECHANICAL- Weights 200 g 0.2mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

106 MECHANICAL- Weights 200 mg 0.02mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

107 MECHANICAL- Weights 5g 0.03mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

108 MECHANICAL- Weights 5 kg 20mg using F1 class weights

WEIGHTS & Electronic balance by
substitution method as
per OIML R-111

109 MECHANICAL- Weights 5 mg 0.01mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

110 MECHANICAL- Weights 50 g 0.03mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

111 MECHANICAL- Weights 50 mg 0.02mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 18 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
112 MECHANICAL- Weights 500 g 6mg using F1 class weights
WEIGHTS & Electronic balance by
substitution method as
per OIML R-111

113 MECHANICAL- Weights 500 mg 0.02mg using E1 class weights

WEIGHTS & semi micro balance
by substitution method
as per OIML R-111

114 THERMAL- SPECIFIC Temperature & 25 % RH to 95 % RH 1.3%RH using Temp & humidity
HEAT & HUMIDITY Humidity Transmitter/ @20ºCto 60ºC chamber , Temp &
Digital /Dial humidity meter by
Temperature & comparison method
Humidity Meters

115 THERMAL- Glass Thermometer - 40 ºC to 200 ºC 0.51ºC Using Class A RTD,

TEMPERATURE Temp. bath, Temp.
indicator/Recorder by
comparison method

116 THERMAL- Oil Bath, Low & High -100 ºC to 200 ºC 0.8ºC Using Class A RTD,
TEMPERATURE Temperature Bath, Dry Temp.
Bath indicator/Recorder by
Comparison Method

117 THERMAL- Oil Bath, Low & High 200 ºC to 1200 ºC 1.84ºC Using S & N Type
TEMPERATURE Temperature Bath, Dry thermocouple, Temp.
Bath Indicator/Recorder by
Comparison Method

118 THERMAL- RTD, Thermocouples, - 80 ºC to 25 ºC 0.42ºC using Class A RTD,

TEMPERATURE Indicator with Sensor Temperature bath,
Temp.
Indicator/Recorder

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 19 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
119 THERMAL- RTD, Thermocouples, 25 ºC to 400 ºC 0.7ºC using Temperature
TEMPERATURE Indicator with Sensor bath, Class A RTD,
[Link]/Record
er by Comparison
method

120 THERMAL- RTD, Thermocouples, 400 ºC to 1200 ºC 1.7ºC Using 'S' Type
TEMPERATURE Indicator with Sensor thermocouple, High
Temp. Bath, Temp.
Indicator/Recorder by
comparison method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 20 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

1 ELECTRO- AC Current (40 Hz to 1 1 A to 3 A 0.2% to 0.4% Using 6 1/2 Digit

TECHNICAL- kHz) Multimeter by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Measure)

2 ELECTRO- AC Current (40 Hz to 1 10 mA to 1 A 0.5% to 0.2% Using 6 1/2 Digit

TECHNICAL- kHz) Multimeter by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Measure)

3 ELECTRO- AC Current (40 Hz to 3 A to 10 A 0.4% to 0.23% Using 6 1/2 Digit

TECHNICAL- 1kHz) Multimeter by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Measure)

4 ELECTRO- AC Current (50 Hz) 10 A to 30 A 0.23% to 0.4% Using 6 1/2 Digit

TECHNICAL- Multimeter & Current
ALTERNATING Shunt by Direct Method
CURRENT (< 1 GHZ)
(Measure)

5 ELECTRO- AC Current ( 45 Hz to 1 3 A to 10 A 0.21% to 0.23% Using Multi Product

TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

6 ELECTRO- AC Current ( 45 Hz to 1 0.7% to 0.26% Using Multi Product

30 µA to 330 µA
TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 21 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

7 ELECTRO- AC Current (45 Hz to 1 10 A to 20 A 0.23% Using Multi Product

TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

8 ELECTRO- AC Current (45 Hz to 1 0.26% to 0.53% Using Multi Product

330 µA to 33 mA
TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

9 ELECTRO- AC Current (45 Hz to 1 330 mA to 3 A 0.24% to 0.21% Using Multi Product

TECHNICAL- kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

10 ELECTRO- AC Current (45 Hz to 33 mA to 330 mA 0.36% to 0.24% Using Multi Product

TECHNICAL- 1kHz) Calibrator Fluke 5502A
ALTERNATING by Direct Method
CURRENT (< 1 GHZ)
(Source)

11 ELECTRO- AC Current (50 Hz) 20 A to 1000 A 0.2% to 0.93% Using Multi Product
TECHNICAL- Calibrator Fluke 5502A
ALTERNATING & Current Coil by Direct
CURRENT (< 1 GHZ) Method
(Source)

12 ELECTRO- DC Current 1 mA to 100 mA 0.02% to 0.02% Using Multi Product

TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

13 ELECTRO- DC Current 10 A to 20 A 0.08% to 0.13% Using Multi Product

TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 22 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

14 ELECTRO- DC Current 100 mA to 10 A 0.76% to 0.76% Using Multi Product

TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

15 ELECTRO- DC Current 20 A to 1000 A 0.13% to 0.33% Using Multi Product

TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) & Current Coil by Direct
Method

16 ELECTRO- DC Current 0.8% to 0.17% Using Multi Product

33 µA to 1 mA
TECHNICAL- DIRECT Calibrator Fluke 5502A
CURRENT (Source) by Direct Method

17 ELECTRO- AC Current (50 Hz) 30 A to 300 A 0.3A to 1.6A Using Current Shunt
TECHNICAL- with DMM by Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

18 ELECTRO- AC Voltage (40 Hz to 1 V to 750 V 0.11% Using 6 1/2 digit

TECHNICAL- 1kHz ) multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

19 ELECTRO- AC Voltage (40Hz to 10 mV to 1 V 0.5% to 0.11% Using 6 1/2 digit

TECHNICAL- 1kHz) multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

20 ELECTRO- AC Voltage (50 Hz) 1 kV to 28 kV 3% Using HV Probe with

TECHNICAL- DMM by Direct Method
ELECTRICAL
EQUIPMENT
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 23 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

21 ELECTRO- DC Current 1 A to 3 A 0.35% to 0.17% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

22 ELECTRO- DC Current 0.35% to 0.13% Using 6 1/2 Digit

10 µA to 1 A
TECHNICAL- Multimeter by Direct
ELECTRICAL Method
EQUIPMENT
(Measure)

23 ELECTRO- DC Current 10 A to 30 A 0.19% to 0.35% Using 6 1/2 digit

TECHNICAL- multimeter & current
ELECTRICAL shunt by direct method
EQUIPMENT
(Measure)

24 ELECTRO- DC Current 3 A to 10 A 0.22% to 0.19% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

25 ELECTRO- DC Current 30 A to 300 A 0.19A to 2.30A Using Current shunt

TECHNICAL- with DMM by direct
ELECTRICAL method
EQUIPMENT
(Measure)

26 ELECTRO- DC Voltage 1 kV to 40 kV 1.37% to 3.0% Using HV Probe with

TECHNICAL- DMM by direct method.
ELECTRICAL
EQUIPMENT
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 24 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

27 ELECTRO- DC Voltage 1 mV to 10 mV 0.42% to 0.04% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

28 ELECTRO- DC Voltage 10 mV to 10 V 0.42% to 0.009% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

29 ELECTRO- DC Voltage 10 V to 1000 V 0.009% to 0.013% Using 6 1/2 digit

TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

30 ELECTRO- Resistance 1 ohm to 100 Mohm 0.062% to 0.94% Using 6 1/2 digit
TECHNICAL- multimeter by direct
ELECTRICAL method
EQUIPMENT
(Measure)

31 ELECTRO- Timer, Stop Watch 1 s to 24 hour 0.12s to 100s Using Digital Timer by
TECHNICAL- comparison method
ELECTRICAL
EQUIPMENT
(Measure)

32 ELECTRO- AC Voltage (45 Hz to 3 mV to 30 mV 1% to 0.25% Using Multi Product

TECHNICAL- 10 kHz) Calibrator Fluke 5502A
ELECTRICAL by Direct Method
EQUIPMENT (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 25 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

33 ELECTRO- AC Voltage (45 Hz to 30 mV to 300 mV 0.25% to 0.07% Using Multi Product

TECHNICAL- 10 kHz) Calibrator Fluke 5502A
ELECTRICAL by Direct Method
EQUIPMENT (Source)

34 ELECTRO- AC Voltage (45 Hz to 300 mV to 3 V 0.07% to 0.065% Using Multi Product

TECHNICAL- 10 kHz) Calibrator Fluke 5502A
ELECTRICAL by Direct Method
EQUIPMENT (Source)

35 ELECTRO- AC Voltage (45Hz to 10 3 V to 330 V 0.065% to 0.12% Using Multi product

TECHNICAL- kHz) calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

36 ELECTRO- AC Voltage (45Hz to 330 V to 1000 V 0.11% to 0.06% Using Multi product
TECHNICAL- 10kHz) calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

37 ELECTRO- Capacitance 1 nF to 100 mF 0.6% to 1.4% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

38 ELECTRO- DC Resistance 100 ohm to 1000 0.6% to 1.7% Using Multi product
TECHNICAL- Mohm calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

39 ELECTRO- DC Resistance 2 ohm to 100 ohm 0.13% to 0.6% Using Multi product
TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 26 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

40 ELECTRO- DC Voltage 1 mV to 10 mV 0.38% to 0.05% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

41 ELECTRO- DC Voltage 10 mV to 100 mV 0.05% to 0.01% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

42 ELECTRO- DC Voltage 100 V to 1000 V 0.01% to 0.01% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

43 ELECTRO- Frequency 10 Hz to 1 MHz 0.012% to 0.0001% Using Multi product

TECHNICAL- calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

44 ELECTRO- Oscilloscope 50 k Hz to 200 MHz 2.3% to 7% Using Multi product

TECHNICAL- Bandwidth calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

45 ELECTRO- Oscilloscope Time 2 ns to 1 s 0.03% to 0.22% using Multi product

TECHNICAL- Marker calibrator Fluke 5502A
ELECTRICAL by direct method
EQUIPMENT (Source)

46 ELECTRO- Oscilloscope 10 mV to 40 V 0.67% to 0.45% Using 6 1/2 multimeter

TECHNICAL- voltage(amplitude) DC & Multi product
ELECTRICAL signal calibrator Fluke 5502A
EQUIPMENT (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 27 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

47 ELECTRO- Oscilloscope 10 mV to 40 V 0.92% to 0.54% Using 6 1/2 multimeter

TECHNICAL- voltage(amplitude) & Multi product
ELECTRICAL peak to peak calibrator Fluke 5502A
EQUIPMENT (Source)

48 ELECTRO- 'K' type thermocouple -100 °C to 1350 °C 0.47°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Measure)

49 ELECTRO- 'B' type thermocouple 600 °C to 1800 °C 0.65°C Using Multi product
TECHNICAL- calibrator Fluke 5502A
TEMPERATURE and 6.5 digit
SIMULATION mumltimeter by direct
(Source,Measure) method

50 ELECTRO- 'E' type thermocouple -100 °C to 1000 °C 0.58°C Using Multi product
TECHNICAL- calibrator Fluke 5502A
TEMPERATURE and 6.5 digit
SIMULATION mumltimeter by direct
(Source,Measure) method

51 ELECTRO- 'J' type thermocouple -100 °C to 1200 °C 0.61°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

52 ELECTRO- 'N' type thermocouple -100 °C to 1300 °C 0.51°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 28 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

53 ELECTRO- 'R' type thermocouple 0 °C to 1750 °C 0.67°C Using 6 1/2 multimeter

TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

54 ELECTRO- RTD -100 °C to 800 °C 0.46°C Using 6 1/2 multimeter

TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

55 ELECTRO- 'S' type thermocouple 0 °C to 1750 °C 0.55°C Using 6 1/2 multimeter

TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

56 ELECTRO- 'T' type thermocouple -100 °C to 400 °C 0.49°C Using 6 1/2 multimeter
TECHNICAL- & Multi product
TEMPERATURE calibrator Fluke 5502A
SIMULATION by direct method
(Source,Measure)

57 MECHANICAL- Centrifuge, RPM 12 rpm to 10000 rpm 1.52% to 0.025% Using Tachometer by
ACCELERATION AND Source Direct Method as per
SPEED Sanas TR 45-01

58 MECHANICAL- Pressure Gauge- 0 bar to 700 bar 0.43bar Using Pressure

PRESSURE Hydraulic (Digital / Calibrator by
INDICATING DEVICES Analog Pressure Comparison Method as
Gauge, Pressure per DKD R 6-1
Transducer / Sensor /
Transmitter / Switch
with or without Indicator
/ Calibrator / Controller)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 29 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

59 MECHANICAL- Pressure Gauge- 0 bar to 30 bar 0.011bar Using Pressure

PRESSURE Pneumatic (Digital / Calibrator by
INDICATING DEVICES Analog Pressure Comparison Method as
Gauge, Pressure per DKD R 6-1
Transducer / Sensor /
Transmitter / Switch
with or without Indicator
/ Calibrator / Controller,
Manometer)

60 MECHANICAL- Vacuum Gauge / - 0.85 bar to 0 bar 0.0009bar Using Pressure

PRESSURE Negative Pressure Calibrator by
INDICATING DEVICES Gauge (Digital / Analog Comparison Method as
Vacuum Gauge, per DKD R 6-2
Vacuum Transducer /
Sensor / Transmitter /
Switch with or without
Indicator / Calibrator /
Controller)

61 MECHANICAL- Electronic Weighing 1 g to 5 g 0.009mg Using E1 Class

WEIGHING SCALE Balance Standard Weights as
AND BALANCE per OIML R-76

62 MECHANICAL- Electronic Weighing 5 g to 50 g 0.02mg Using E1 Class

WEIGHING SCALE Balance Standard Weights as
AND BALANCE per OIML R-76

63 MECHANICAL- Electronic Weighing 50 g to 220 g 0.1mg Using E1 Class

WEIGHING SCALE Balance Standard Weights as
AND BALANCE per OIML R-76

64 MECHANICAL- Electronic Weighing 1 kg to 10 kg 20mg Using F1 Class

WEIGHING SCALE Balance (Readability Standard Weights as
AND BALANCE 0.1 mg) per OIML R-76

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 30 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

65 MECHANICAL- Electronic Weighing 10 kg to 20 kg 100mg Using F1 Class

WEIGHING SCALE Balance (Readability 1 Standard Weights as
AND BALANCE mg) per OIML R-76

66 MECHANICAL- Electronic Weighing 20 kg to 100 kg 5g Using F1 Class

WEIGHING SCALE Balance (Readability 1 Standard Weights as
AND BALANCE mg) per OIML R-76

67 MECHANICAL- Electronic Weighing 220 g to 1 kg 2mg Using F1 Class

WEIGHING SCALE Balance (Readability Standard Weights as
AND BALANCE 10 mg) per OIML R-76

68 MECHANICAL- Electronic Weighing 100 kg to 300 kg 20g Using M1 Class

WEIGHING SCALE Balance (Readability Standard Weights as
AND BALANCE 100 mg) per OIML R-76

69 THERMAL- SPECIFIC Humidity Chambers, 10 % RH to 95 % RH 1.3% RH Using Temp & Humidity

HEAT & HUMIDITY Climatic Chambers @ 20ºCto 60ºC Meter by Comparison
Method

70 THERMAL- Oil Bath, Low & High -100 ºC to 200 ºC 0.8ºC Using Class A RTD,
TEMPERATURE Temperature Bath, Dry Temp.
Bath indicator/Recorder by
Comparison Method

71 THERMAL- Oil Bath, Low & High 200 ºC to 1200 ºC 1.84ºC Using S & N Type
TEMPERATURE Temperature Bath, Dry thermocouple, Temp.
Bath Indicator/Recorder by
Comparison Method

72 THERMAL- RTD, Thermocouples, 25 ºC to 400 ºC 0.7ºC using Temperature

TEMPERATURE Indicator with Sensor bath, Class A RTD,
[Link]/Record
er by Comparison
method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name ULTRA CAL, #42, MALAGALA, 1ST FLOOR, SRINIVASANAGAR, BENGALURU,
KARNATAKA, INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2996 Page No. : 31 / 31

Validity 23/05/2019 to 22/05/2021 Last Amended on -

[Link] Discipline / Group Quantity Measured/ Range / Frequency * Calibration Remarks

Instrument Measurement
Capability(±)
Site Facility

73 THERMAL- RTD, Thermocouples, 400 ºC to 1200 ºC 1.7ºC Using 'S' Type

TEMPERATURE Indicator with Sensor thermocouple, High
Temp. Bath, Temp.
Indicator/Recorder by
comparison method

74 THERMAL- Thermal Chambers / - 100 ºC to 250 ºC 0.5ºC Using class A RTD,

TEMPERATURE Ovens, Incubators, Temp.
Autoclave, Water Bath, Indicator/Recorder by
Furnace comparison method

75 THERMAL- Thermal Chambers / 250 ºC to 1200 ºC 1.8ºC Using S, N & J Type

TEMPERATURE Ovens, Incubators, thermocouples, Temp.
Autoclave, Water Bath, Indicator/Recorder by
Furnace comparison method

* CMCs represent expanded uncertainties expressed at approximately the 95% level of confidence, using a coverage factor of k = 2.

This is annexure to 'Certificate of Accreditation' and does not require any signature.