1 747
Room Temperature Sensor QAA32
NTC resistor sensing element
Use
In HVAC plants to acquire the room temperature.
For use with controllers whose sensor signal input are not galvanically separated from
the AC 230 V mains.
Functions
Ω The sensor acquires the room temperature
1747D01
9000
by means of its NTC resistor. The resistance
7000 value changes according to the ambient
5000
temperature. It is available for further han-
dling by a suitable controller.
3000
1000
5 15 25 35 °C
Type summary
Type reference Description
QAA32 Room temperature sensor
ARG70 Adapter plate 120 x 120 mm for 4“ x 4“ conduit boxes
ARG70.1 Adapter plate 96 x 120 mm for 2“ x 4“ conduit boxes
CE1N1747en
2014-07-30 Building Technologies
Mechanical design
The units have been designed for wall mounting. They are suitable for use with most
commercially available recessed conduit boxes. The cables can be introduced from the
rear (concealed wiring).
Installation notes
Location On a flat inner wall of the space to be heated or air conditioned. Not in recesses,
shelves, not behind curtains, not opposite or near heat sources. The unit must not be
exposed to direct solar radiation.
Notes • When installing the unit, fix the baseplate first, then hook on the body and make the
electrical connections. Then fit the cover and secure it.
• The end of the conduit at the sensor must be sealed to prevent false measurements
due to draughts through the conduit.
• The permissible environmental conditions should be observed.
• Installation instructions are printed on the packing.
Disposal
The devices are considered electronics devices for disposal in terms of European
Directive 2012/19/EU and may not be disposed of as domestic waste.
• Dispose of the device via the channels provided for this purpose.
• Comply with all local and currently applicable laws and regulations.
Technical data
General unit data Operating range 0 ...40 °C
Sensing element NTC resistor, 3 kΩ at 25 °C
Measuring tolerance at 25 °C ± 0.3 K
Time constant (with air movement) approx. 6 min
Connection Terminals for cross-sectional areas of 2 x 1.5 mm2 or 1 x 2.5 mm2
Environmental conditions Operation to IEC 721-3-3
Climatic conditions class 3K5
Temperature 0...50 °C
Humidity <85 % r. h.
Pollution degree normal, to EN 60730
Transport to IEC 721-3-2
Climatic conditions class 2K3
Temperature -25...+65 °C
Humidity <95 % r. h.
Mechanical conditions class 2M2
Degree of protection Protection class II according to EN 60730-1
Protection degree of housing IP30 according to EN 60529
Directive and Standards Product standard EN 60730-1
Automatic electrical controls for household
and similar use
EU Conformity (CE) CE1T1747X1 *)
Environmental The product environmental declaration CE1E1701*) contains data on environmentally
compatibility compatible product design and assessments (RoHS compliance, materials composi-
tion, packaging, environmental benefit, disposal).
Miscellaneous Weight approx. 0.1 kg
Colour white, NCS S 0502-G (RAL 9003)
*) The documents can be downloaded from [Link]
2/3
Siemens QAA32 Room Temperature Sensor CE1N1747en
Building Technologies 2014-07-30
Internal diagram
NTC
1747G01
B1 M
Dimensions
Unit and Baseplate 86
30 30
3001M01
30
28
99,6
86
28
30
96,4 36 3,6
3001M02
28 28
2000 – 2014 Siemens Switzerland Ltd. Subject to change
3/3
Siemens QAA32 Room Temperature Sensor CE1N1747en
Building Technologies 2014-07-30
