USER MANUAL
ENGLISH
VOICE SYNTHESIZER
VOX2000
Codes:
SNV200:Serial version
KIT-Fiss-SNV20X:Kit of fixed for DIN guide
Revision 0
19/12/11
INDEX
TECHNICAL DATA ........................................................................................................................................................ 3
DIMENSIONS ............................................................................................................................................................ 3
CONNECTION DRAWING ...................................................................................................................................... 4
QUICK START .......................................................................................................................................................... 5
AUDIO MESSAGES: ................................................................................................................................................ 6
2
Rev. n. 00 hardware ver. 1 firmware ver. 1 Date: 19/12/11
Included in the packaging:
Voice synthesizer
Mounting kit for guide DIN (optional);
Instructions for use.
You will find useful information and advice for correct assembly and maintenance:
1. Check the packaging integrity
2. During opening do not damage the board with sharp objects (scissors…)
3. To avoid damages use the board only with appropriate bracelet to lead electrostatic charges to ground.
TECHNICAL DATA
DIMENSIONIS 103x72x25
ENCUMBRANCE 125x85x25
WEIGHT 75 g.
CODING SERIALE VEGA (MAX 32 messaggi di piano)
LOAD OF MESSAGES By micro SD-CARD min 512MB MAX 2GB (Format FAT32)
PROGRAMMING Act the SW1 and SW2 push buttons on the board
POWER SUPPLY 12-24 VAC-DC ± 10%
Standy 1,2W (12VDC)
POWER
Maximum Power 5W (12VDC)
TEMPERATURE WORKING RANGE from -15°C to +50°C
TEMPERATURE STOCKING RANGE from -25°C to +60°C
DIMENSIONS
3
CONNECTION DRAWING
Outputs serial
RS-485(optional)
C3
AR
VEGA
AA
ENCSER
T1 T2
GND
VIN
UP
DW
C1
I3
I4
I5
I6
I7
I8
I1
I2
I9
C2
Gong
(Trigger)
NOT USED
I17 I18 COM
SNV200
SW2
(Serial version)
SW1
K.O. +
R+ Speaker
Slot +12
R-
Micro-SD 8Ω
Serial connector
CABLES CODES:
VIM DEX Data internal serial
KE 1 excon connector:
GND Power supply (-)
GND
KE Clock internal serial -CB_VG0019….40cm
DEX -CB_VG0029…….5m
VIM Power supply (+) -CB_VG0030……10m
2 excon connectors:
-CB_VG0017…....40cm
-CB_VG0020…….1m
-CB_VG0021…….1,5m
-CB_VG0012……..3m
-CB_VG0013….….5m
-CB_VG0055……..6m
-CB_VG0023……..10cm
-CB_VG0024……..15m
-CB_VG0025……..20m
4
PROGRAMMING MODE:
The speech has a voice menu for programming:
Using two push buttons SW1 and SW2 can be programmed:
-The language of menu and messages used for floors and service messages;
-The volume between 3 levels.
SW1
Programming mode Normal mode Beep
SW1
SW1 SW1 SW1
SW2 Italiano SW2 English SW2 French
Language
SW1 SW1
SW1
SW1
SW2 Low SW2 Normal SW2 High
Volume
SW1
QUICK START
1-make sure that the micro SD-card is inserted in the slot;
2-Connect the speaker (R +, R-)
3-Feeding the (+24- GND), the +12 LED will turn-on.
4-Select the language and the volume.
NOT USED
4 I17 I18 COM
3
SNV200
SW2
1 SW1
(Serial version)
Micro-Sd card*
R+ + Speaker
Dimensions: Slot
K.O.
+12 R- 8Ω 5W
Min:512 MB Micro-SD
Max:2 GB
5
AUDIO MESSAGES:
FLOORS MESSAGES SERVICE MESSAGES
FLOOR FILE DIRECTORY MESSAGES FILE DIRECTORY Audio message
-9 …/Voxit-en-fr/[Link] 00 …/Voxit-en-fr/SerMes/[Link] RISERVED
-8 …/Voxit-en-fr/[Link] 01 …/Voxit-en-fr/SerMes/[Link] RISERVED
-7 …/Voxit-en-fr/[Link] 02 …/Voxit-en-fr/SerMes/[Link] Out of service
-6 …/Voxit-en-fr/[Link] 03 …/Voxit-en-fr/SerMes/[Link] Overload
-5 …/Voxit-en-fr/[Link] 04 …/Voxit-en-fr/SerMes/[Link] Gong
-4 …/Voxit-en-fr/[Link] 05 …/Voxit-en-fr/SerMes/[Link] RISERVED
-3 …/Voxit-en-fr/[Link] 06 …/Voxit-en-fr/SerMes/[Link] Alarm active
-2 …/Voxit-en-fr/[Link] 07 …/Voxit-en-fr/SerMes/[Link] RISERVED
-1 …/Voxit-en-fr/[Link] 08 …/Voxit-en-fr/SerMes/[Link] Fire
0 …/Voxit-en-fr/[Link] 09 …/Voxit-en-fr/SerMes/[Link] RISERVED
1 …/Voxit-en-fr/[Link] 10 …/Voxit-en-fr/SerMes/[Link] RISERVED
2 …/Voxit-en-fr/[Link] 11 …/Voxit-en-fr/SerMes/[Link] RISERVED
3 …/Voxit-en-fr/[Link] 12 …/Voxit-en-fr/SerMes/[Link] RISERVED
4 …/Voxit-en-fr/[Link]
5 …/Voxit-en-fr/[Link]
6 …/Voxit-en-fr/[Link]
7 …/Voxit-en-fr/[Link]
8 …/Voxit-en-fr/[Link]
9 …/Voxit-en-fr/[Link]
10 …/Voxit-en-fr/[Link]
11 …/Voxit-en-fr/[Link]
12 …/Voxit-en-fr/[Link]
13 …/Voxit-en-fr/[Link]
14 …/Voxit-en-fr/[Link]
15 …/Voxit-en-fr/[Link]
16 …/Voxit-en-fr/[Link]
17 …/Voxit-en-fr/[Link]
18 …/Voxit-en-fr/[Link]
19 …/Voxit-en-fr/[Link]
20 …/Voxit-en-fr/[Link]
21 …/Voxit-en-fr/[Link]
22 …/Voxit-en-fr/[Link]
23 …/Voxit-en-fr/[Link]
24 …/Voxit-en-fr/[Link]
25 …/Voxit-en-fr/[Link]
26 …/Voxit-en-fr/[Link]
27 …/Voxit-en-fr/[Link]
28 …/Voxit-en-fr/[Link]
29 …/Voxit-en-fr/[Link]
30 …/Voxit-en-fr/[Link]
31 …/Voxit-en-fr/[Link]
32 …/Voxit-en-fr/[Link]
33 …/Voxit-en-fr/[Link]
34 …/Voxit-en-fr/[Link]
35 …/Voxit-en-fr/[Link]
36 …/Voxit-en-fr/[Link]
37 …/Voxit-en-fr/[Link]
38 …/Voxit-en-fr/[Link]
39 …/Voxit-en-fr/[Link]
40 …/Voxit-en-fr/[Link]
6
NOTE:
7
Vega Srl, Via degli appennini 11– 63020 Ponzano di Fermo (AP) Italy – [Link] 01578140442
– Tel. +39.0734.631941 Fax +39. 0734.636098 –
website [Link] - e-mail info@[Link]
