Aliya khursid
Submitted By: Aliya Khurshid
Submitted To: Miss Asma BIBI
CMS:
BS Applied Psychology
Aliya khursid
Topic: History of Computer
Aliya khursid
0.1 What is Computer:-
A computer is an electronic machine that’s accepts
information in form of data, then processes it according to
specific instructions, and provides the results as new
information.
1.1.1 Earliest Computers:
Originally calculations were computed by
humans, whose job title was computers.
The first computer use of the word “Computer”
was recorded in 1613, referring to a person
who carried out calculation, or computations,
and the word continued to be used in sense
until middle of the 20th century.
The calculations of this period were specialized
and expensive, requiring years of training in
mathematics.
These human computers were typically
engaged in the calculation of a mathematical
expression.
Aliya khursid
1.1.2 Tally Sticks Monitory system:
Tally stick was an ancient memory aid device to record
and document numbers, quantities, or even messages.
1.1.3 Abacus
An abacus is a mechanical device used to aid an individual
in performing mathematical calculations.
The abacus was invented in Babylonia in 2400 B.C.
The abacus in the form we are most familiar with was first
used in china in around 500 B.C.
It used to perform basic arithmetic operations.
1.1.4 slide Rule
Invented by William Ought red in 1622.
Based on Napier’s idea about logarithms.
Used primarily for :
Multiplication
Aliya khursid
Division
Roots
Logarithm
Trigonometry
Not normally used for addition or subtraction.
1.1.5 Pascaline
Invented by Blaise Pascal in 1642.
It was its limitation to addition and subtraction.
It is too expensive.
1.1 First Generation – Vacuum Tubes
From 1946 to 1956
It can perform 2000 to 16000 additions
per second
Had main memory 100 bytes to 2
kilobytes.
2. Used vacuum tubes
3. Very large machine
Aliya khursid
Special rooms to house them with air
conditioning
Specially trained technicians to run &
maintain.
1.2 Second Generation- Transistors
1. from 1959 to around 1965
2. Smaller, faster, and more reliable
Used transistors
6000 to 300000 operations
Main memory 6 kilobytes to 1.3 megabytes
3. one-tenth the price of a 1st Generation
4. Become common is larger businesses and universities.
1.3 Third Generation – Integrated circuits
1. from 1965 to around 1972
2. used integrated circuits many transistors on one piece of
silicon
3. Smaller, faster, more reliable and lower in price
Can do 100, 000 to 400, 000,000 operations per
second.
Aliya khursid
Cost amount one tenth the amount of second
generation computers.
4. These Computers become very common in medium to large
businesses.
1.4 Fourth Generation- Microprocessors
1. from 1972 until now
2. used large scale to vary large scale integrated circuits
Put more than one IC on a silicon chip
Can do more than one function
3. Smaller, faster, more reliable and lower in price
Size of a television or much smaller
Can do 500,000 to 100, 000,000 operations/ per
second.
Cost onrtenth or less, the amount of third
generation.
Very common in homes and business.
2.0 Types Of computers
Analog computers
Digital computers
2.1 Analog computers
Aliya khursid
1. An analog computer recognize data as a continuous
measurement of a physical property.
2. It has no state
3. Its output is usually displayed on a meter or graphs
4. Examples, are analog clock, speedo-meter of a car, thermo
meter.
2.2 Digital computers
1. It works with numbers.
2. They break all types of information into tiny units and use
numbers to represent those pieces information.
3. Everything is described in two states either on (1) of off (o)
4. They all are fast and having big memory.