RIGHT ANGLE VALVE / OBLIQUE VALVE

Code No. Inlet Size

DRS105-GM-F65BSP Right angle valve F BSP Thread 2-1/2” x F 2-1/2”
DRS097-GM-65BSP Oblique valve M BSP Thread 2-1/2” x F 2-1/2”
DRS097-GM-65MACH Oblique valve M BSP Thread 2-1/2” x M Machino 2-1/2”

DRS105-GM-F65BSP DRS097-GM-65BSP DRS097-GM-65MACH DRS097-GM-65FMACH DRS097-GM-65FMACH Oblique valve M BSP Thread 2-1/2” x F Machino 2-1/2”

DELIVERY HOSE COUPLING

Model Code No. Nominal Size Material
BS336 COUPLING WRS079-LA-038-NA 1-1/2” (38mm) Aluminium Alloy
BS336 COUPLING WRS079-LA-050-NA 2” (50mm) Aluminium Alloy
BS336 COUPLING WRS079-LA-065-NA 2-1/2” (65mm) Aluminium Alloy
MACHINO COUPLING MIS051-LA-038-NA 1-1/2” (38mm) Aluminium Alloy
MACHINO COUPLING MIS051-GM-065-NA 2-1/2” (65mm) Copper Alloy
BS336 COUPLING MACHINO COUPLING

NOZZLE
Code No. Type Material Finish- Inlet Size Flowrate @ 100psi Throwrange @
ing (6.8bar) 100psi(6.8bar)
Aluminium Alloy Male Instantaneous 500L/min (Jet) 26m (Jet)
WRS099-LA-STD-NA Standard Natural
to BS 1490 BS 336 590L/min (Spray) 15m (Spray)
Male Instantaneous 16m (12mm dia)
WRS077-LA-STD-NA Standard Aluminium Alloy Natural 210L/min (12mm dia)
BS 336 (Jet)
WRS103-GM- Copper Alloy 1-1/2 NST Female 310L/min (Jet) 17m (Jet)
Standard Natural
JET/SPRAY 038-NA to BS 1982 Thread 400L/min (Spray) 10m (Spray)
JET/SPRAY JET

FIRE HYDRANT, BREECHING INLET AND FIRE DEPARTMENT CONNECTION

HYD060- CI-100-RD HYDD060- CI-100M-MACH HYD055- CI-150-RD WRS115-CI-004-MACH DRS095-CI-002-MACH

2-WAY FIRE HYDRANT 2-WAY FIRE HYDRANT 3-WAY FIRE HYDRANT 4-WAY BREECHING INLET 2-WAY BREECHING INLET

CONNECTION ACCESSORIES

MIS076-BR-M65BSP MIS075-BR-M65BSP MIS078-BR-F65BSP MIS078-BR-M65BSP MIS419-GM-065-NA MIS002-BR-065-MACH

ADAPTOR ADAPTOR ADAPTOR ADAPTOR CAP MALE MACHINO CAP FEMALE MACHINO

SPRINKLER ALARM VALVE The alarm valve is an alarm device designed for installation in a sprinkler system. It is used
to actuate a fire alarm when flow of water from the sprinkler system exceeds that of a single
sprinkler. When a sprinkler is in operation, the resulting water flow lowers the pressure in
the sprinkler system. The greater water supply pressure then causes the alarm valve clapper
to open. The seat ring opening of the alarm valve allows the water to flow into the alarm line
connection which will then operate the alarm gong.

The by-pass connection in the check valve allows pressure surges from the supply to by-pass
the alarm valve clapper. An excess system pressure is thus created which steadies the clapper.

A Retard Chamber is used when the water supply pressure fluctuates, such as public main
water supply. It is used to prevent false alarms caused by surges or fluctuations in pressure.
SPECIFICATIONS
Working pressure : 175Psi (12bar)
Factory hydrostatic test pressure : 350Psi (24bar)
Flange Connections : ANSI B16.1 125 FF Flange
Thread Connections : BSP Thread

Code No. Valve Size Friction Loss

SPR182-CI-100-GY 4” (100mm) 5.0m (equivalent length)
SPR182-CI-150-GY 6” (150mm) 8.0m (equivalent length)
FLOW CONTROL EQUIPMENT BALL FLOAT VALVE
MATERIAL
• Valve Body: Bronze BS 1400
• Valve Lever: Stainless Steel 304
• Ball Float: Stainless steel
• Valve Seat: NBR
• Pressure Test: 20 bar
• Inlet connection : BSP Thread
Size (mm) Code No.
2” (50) SPR103-GM-050-NA
3” (80) SPR103-GM-080-NA
4” (100) SPR103-GM-100-NA
6” (150) SPR103-GM-150-NA

FLEXIBLE EXPANSION JOINT

SPECIFICATION
• Body: Polarized Rubber • Working Pressure: 16bar
• Lining: Nylon Cord Fabric • Burst pressure: 45bar
• Frame: Forged steel EN S235JR • Gasket or packing not required
• Flanged: Mild steel BS 10 Table E • Temperature range: -10ºc to 105ºc

FEMALE SCREW UNIONS

Female Screw Union Double Size (mm) Code No.
Sphere
1” (25) MIS251-MS-25BSP
1-1/2” (38) MIS251-MS-40BSP
2” (50) MIS251-MS-50BSP
2-1/2” (65) MIS251-MS-65BSP

Double SPHERE (FLANGE)

Size (mm) Code No.
2-1/2” (65) MIS252-MS-65TE
3” (80) MIS252-MS-80TE
4” (100) MIS252-MS-100TE
Flange Type 6” (150) MIS252-MS-150TE
Double Sphere
8” (200) MIS252-MS-200TE

SINGLE SPHERE (FLANGE)

Size (mm) Code No.
2-1/2” (65) MIS253-MS-65TE
3” (80) MIS253-MS-80TE
4” (100) MIS253-MS-100TE
6” (150) MIS253-MS-150TE
Flange Type Single
Sphere 8” (200) MIS253-MS-200TE

VORTEX INHIBITOR
MATERIAL
Mild Steel Galvanised or
Stainless steel
FEAT URES
• Suitable for suction lift or positive head condition
• Flange connection to BS 10 Table E
• Prevent forming of vortex and air entry to pump
Size (mm) Code No.
2-1/2” (65) SPR001-MS-065-CH
3” (80) SPR001-MS-080-CH
4” (100) SPR001-MS-100-CH
6” (150) SPR001-MS-150-CH
8” (200) SPR001-MS-200-CH
10” (250) SPR001-MS-250-CH

AUTHORIZED DISTRIBUTOR AUTHORIZED DEALER