GUJARAT TECHNOLOGICAL UNIVERSITY
CHANDKHEDA, AHMEDABAD TECHNOLOGY
(AFFILIATED BY GTU)
ADITYA SILVER OAK INSTITUTE OF
AT PLASMA INDUCTION INDIA PVT. LTD
UNDER THE SUBJECT
WINTER INTERNSHIP
SUBMITTED BY
PATEL SACHINKUMAR RAMESHBHAI
ENROLLMENT NO: 181200109031
BACHELOR OF ENGINEERING
ELECTRICAL ENGINEERING
ACADEMIC YEAR (2021-2022)
• Tablet of Content
1. Introduction
2. Product Details
3. Training
4. Daily Tasks And Activities
5. Overall Experience Of Internship
• Introduction
• The Plasma group is among India's most prominent business houses with a
diverse portfolio.
• The Group started a business in the year 2012 and has since then
metamorphosedas a symbol of ingenuity and power of entrepreneurship
• It all started with aspirations to not just sit and wonder but instead do
something that is beyond expectations. To create a name and place in the
hearts of people. This is how the journey of Plasma Group of Companies
began.
• With passion and a clear vision, the company has not only built and expanded
new businesses but has created an exemplary position in all these businesses
in a short period.
• Product Details
• Daily Tasks And Activities
• Material Identification
• Contector
• MPCB
• MCB
• Connector
• Push Button (NO&NC)
• VFD Drive
• Inverter IGBT
• Mechanical relay
• Solid state relay
• Bicon tower light-
• MFCT
• Line CT
• Material identification I
• Rotary control switch
• Buzzar
• CLR
• Power port
• Speed port
• Temperature meter
• RTD
• SMPS
• Signal isolator
• Energy Meter
• Frequently
• Voltage
• Current
• Material identification
• EMI filter
• metle proxy
• Fuse
• Diode
• Fault indicated meter
• Pyrometer
• Jumbo display
• Jigo-12,36,64
• Filter capacitor
• DC choke
• MCCB
• Flow meter
• Transformer section
• Primary winding
• Double Cotting
• Powder Cotting(subond)
• Polyaster
• Secondary winding
• Single Cotting
• Powder Cotting(subond)
• Primary winding use two insulation because high voltage
• Secondary winding use one insulation because low voltage
• Winding for primary & Secondary
• Section winding mostly used high voltage transformer
• Tube winding mostly used low voltage transformer
• Mostly used transformer
• 350 kw-18:06
• 50 kw-25:03
• 350 kw-18:03
• 250 kw -16:04
• 100 kw-24:04
• Tapping use in transformer
0 A 12. I 25. V 23. Y
1 B 14. N 28. R 27. Z
2 C 16 K 31. S
4. D 18 L 34. T
7 E 19 M 26. U
8 F 20 N 30. V
9 G 22. O 17. W
10 H 24 P 21 . X
• Panel wiring
• What is a control panel ?
• A cabinet which contains a collection of electrical components
designed to control and protect the motor and equipment.
• The selection of components for a control panel is mainly
based on
• Power rating of the equipment
• Incoming supply
• Application of the equipment
• Indicator
• Indicator lamps shows the current
status of the equipment
• Main indicators
• Red : R phase
• Yellow :Y phase
• Blue: B phase
• Push Buttons
• Push button are used to on/off the electrical equipment
• Green: start
• Red:stop
• Yellow:reset
• Metering devices
• Contrals panel are also
equipped with metering
devices like
Voltmeter,Ammeter and
Hour run meters in order
to find Voltage, Current,
frequently and speed of
the equipment
• Incomer (isolator)
• Isolator is an off load device,used to control,protect
and isolate the equipment in case of over current or
short circuit condition,
• De energize the equipment to allow the
maintenance in order to clear the faults
• Switch Gear components
• Combination of electrical components like MCCB, MCB, Contactor, Over
load relay, fuses, are used to control, protect and isolate electrical
equipment.
• The main function of these switch gear components are to protect the
electrical equipments in case of any faults occurred in the system.
• Practice
• Checking of Electrical circuits in the panel with the
help of multi meter.
• Study of design and drawing for new panels.
• Prepare wires for panel wiring.
• Fault finding in some panels.
•
• Check wiring of panels according to drawing .
• Testing of panels by giving power.
• Study of electrical item specifications.
