Scribd
Upload
2K views38 pages

Large Diameter Flanges and Fittings

FLANGES STEEL LARGE DIAMEtER FLANGES, 'T.E..A. 'FLANGES, LONG ECKS and ROLLED RINGS FITTINGS STEEL TO MARK PROGRESS S1,AtNlESS and allOy .. TECHNIPSAL DATA EN G:INEERINS GfNIRAL INDEX AND PART NUMBERS L LARGE. DIAMETER

Uploaded by

Ashfaq Anwer
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views38 pages

Large Diameter Flanges and Fittings

FLANGES STEEL LARGE DIAMEtER FLANGES, 'T.E..A. 'FLANGES, LONG ECKS and ROLLED RINGS FITTINGS STEEL TO MARK PROGRESS S1,AtNlESS and allOy .. TECHNIPSAL DATA EN G:INEERINS GfNIRAL INDEX AND PART NUMBERS L LARGE. DIAMETER

Uploaded by

Ashfaq Anwer
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Ladish Catalog Cover
  • Catalog Introduction
  • Table of Contents
  • Light Type Flanges
  • Tubular Exchanger Manufacturers
  • Ring Flanges
  • Weight Tables
  • Ladish Product Showcase
TO MARK PROGRESS LADISH see vo dls FITTINGS CATALOG NO. 55 SEAMLESS FORGED LARGE LONG FORGED WELDING Siam DENN alt ame) Te) STEEL FITTINGS FLANGES FLANGES NACL es) FITTINGS LADISH } Pet eT TSH Contolld Quality mu ns LARGE DIAMETER FLANGES, T.E.M.A. FLANGES, LONG NECKS and ROLLED RINGS To MARK PROGRESS LARGE DIAMETER FLANGE: LADISH LARGE DIAMETER FLANGES, LONG WELDING NECKS, 1.E.M.A. FLANGES AND ROLLED RINGS TABLE OF CONTENTS EaEa TEA FLANGES (continved) Light Type Slip-On. . 501A, 50 Ib, t 100° F. elding Neck 503 Slip-On. 504 150 Ib. WSP. at 750° F. siding Neck . 505 Shin 506 300 Ib. W.S.P. at 750" F. ‘Welding Neck 508 ip-On 509 495 Ib, American Standard ‘Welding Neck 511A Slip-On 512A, 950 Ib, American Standard ‘Welding Neck: SDA Slip-On Baa. LONG WELDING NECKS 5L 30L dou ot SOL. 450L 2350L EMA. FLANGES Intoduction exo Gaskot Data for [Link].A. Flanges Capoion Allowances Appling to TEMA Clos: R, Hub Type Flanges 150 Ib. Stonderd 00, 701, ‘703, 703 5 42" 195 1b. 8 14” 1500 1b. 10 BOD.» 65" 1D. 5 in thichne 6 39" 150 b, Shell 1D. Always Supply Complete 170 “tong faced on 172 2 nm 474 14 15 1B 116 116 105 106 187 1 ‘Clots R, Hub Type Flanges (continued) 300 Ib. Standard. .... ++ 704,705, 189 706, 707 450 Ib. Standard 08, 709, 190 710,711 (600 Ib. Standard 112,713, 191 4, 15 Clave € and Clase A, Hub Type Flanges 175 lb, Standard. 16,117, 192 73,19 150 Ib, Standard 730, 721, 198 782, 123 300 Ib. Standard. 724,795, 194 126, 137 450 Ib, Standard, 198,729, 195 730, 600 Ib, Standard. 732,733, 196 (Class C and Class A, Ring Type Flanget 75 Ib. Standard, 136,737, 197 738, 739 150 Ib, Standard, 140,741, 197 749, 743 300 Ib, Standord. 144,45, 197 146, 747° Class A, Ring Type Flanges lb, Standard. 748,149, 198 750, 754 150 Ib, Standard 152,753, 198 154, 755 300 Ib, Standard. 756, 757, 158, 159 ROLLED RINGS. : 199-203 ‘TYPICAL INSTALLATIONS. 204 HOW TO ORDER INFORMATION EXAMPLE OF INFORMATION REQUESTED ‘Avstican Standard Slip-On Flanges per Ladish Coto- log 55, Page 176. Bored for 42” OD.,%5" wall pipe. Long Welding Necks 16” led. Seamless Rolled Riogst TEMA, Cless Ry Hub ‘Type, Shell Flanges at cover ‘end per Ladish Catalog 55, Page 189, for 29” LD. x 30” OD. Shel none + Away guy mal by gpd, ede od z Alea geste otal ty sen se d Hirsh Boa edt tie pono Tot Wag ned cles sie Seg Was astm ist 512A] fend oe Ron fa ener nan i etlog. Basel age, ees noes eae tae (oe Folly to wenn an sb EEE ath on toe |_| Pen eae ae eos be ASTM A105 | 150L pil formes Ur Grae pe tere oe ae Se! | RSet Aa bo te o vest © si Aven A Re aod dino i Gene ae pened Ma Ha tao ole oe ea ded Wes beret ace gig ms eicrced a ee a ala asi Aver Tor | (Daly ed ai i sa Wordar is based on quotation, Ladith quotation number should be made part ofthe order. ‘Orders should be placed with your Authorized Ladish Diasibutor His ample socks mean prompt service. Information on Order Jo man ooeest LARGE DIAMETER FLANGES, LONG WELDING NECKS, T.E.M.A. FLANGES AND ROLLED RINGS PICTORIAL INDEX Light Type 12 50Ib. at 100°F, 173 1506. WS ot 750° F174 300 b.. Fon nae oweeren WS.P ot 750°F, 175 ire me Fines 195 I. SeePoges Ametican Standard 176 250 Ib, LARGE OAMETER FLANGES: Aeiican Standard 177 ie aoe 4301 Soot Ik doo tt Soo It Boot Boo it ‘LONG WELDING NECKS eI. nes i Fe ‘sole 188 wo tee Be ike go iat he nt “si. 198 wee is fork 18h Bo tes wo 86 hae ant ge 75,130,006, 197 ase Ag Fg TEMA. FLANGES 15, 150, 300 Ib, 198 ous us Pry we 31 thes oe itSioeeee ‘ROLLED RINGS Always Supply Complete Information on Order m 72 (issey Va ies uet aust ster (tsi ad lea fed]: peed Mie, oud eee See Juceed. jee Voice Gisol sel eciica LIGHT TYPE FLANGES FORGED AND ROLLED STEEL With 125 Ib. ASA Diameter and Drilling FOR LIGHTWEIGHT PIPE* crane nnexnes mare oma TMraTE im a ‘r went usr wre sue Gio sumer ute ee wtuncnonueren nat : : i cris OrHDLES —CRCLE poor Me b % | She Ye Othe |e Me The 1%. Ye Oe 1% he 12 1% The 14% % [isu | 1% 18 1 19% | 1% 22 1h 24 Th 264 1% 2h tm «CTOME OC 84 yc 3mm 1% OY 28 34k m4 ~«CPuRwasen 98 Ei 36% 1% 32 il 38% | 1% [32 anion 40% 1% 4B 1% 45 1% 41 2% 9 2% 31 2% 53 2% 384451 55 2% 60% 417 37 2% 62% 504 3 2 i 69% 643 m% [2 16 154 am 846 Slip-On Part No. 501A Fumnishod to ASTM Specification A181 Grade I. {There fanges have flat faces and ore des = Light (ype Forged Steel Flange with diameter ei fall Face gasket, t ‘ilings of 125 Io: Ameiican Stondord Cast on Flange. LADtIS H ©CONTEKEOTLEDB QuaALITY FORGED AND ROLLED STEEL LARGE DIAMETER FLANGES ASIM A181—Grade |4 50 Ib. Pressure at 100° F. i a ane age ge A frre se Sueren rwenwess erased “ustos ieuen or ha sa UOFFUANGE OF TUNGE TAGE” GASRET SIZE ean or mies, " es a . sous nous 263% 1% 28% PTUABEK 2M 26H 3 32 3% 1 29%4x30% 29% 28% 36 31% 105 FYB 31% 30% 36 33% 112 33%x35 33% 6 36% 140 prices 35%x37 35% _ TOKE 40 38% 149 37x39 37% specirten 740 40% 157_—«ON MioxA5e 43% wo Ta 46% | 209 50x51 | 493% Purchaser "59 52% 24 SOUTH | 56 64 59 | 312 | canon 62x63% | 62 2 65398 68% 10% 2 “1% | 556 4 Thin TO 80 TT 105 peu w E L > ' N c N e c K 1% 29%4%30 % ae[a [a1 jie 1% 3132 ™% 36 [1 [33 [140] y% 33%x34 % 360135148 . 39% 1% I5Yr86% 34% 344% 40 1% | 37% 171 Pres Mh 1% BT YK3 8 36% 2% ~—«TOBE 401m 39% 181 436 1% 39VxAO 38% 38H MH _—SPECIFIED “44 Ye AH 1H 50 1% ASA AM BATH 934 o 8 56 1% Si Mx52% 50% 50% 2% PURCHASER 56 114 53% 269 N54 62% 1% 57x59 574 | 56K 3h 68 1% 60% 335 canton _ aPPUL 160 68% 1% 63x65 63% OHH 12 1m 66% 451 66 15% CFUxTI% 69% 68% 4 12 1% 73 591 72 8% 2 T5WxTT% 75% 74% Me 801% 79 798 rs i y et Welding Neck Part No. 503 Slip-On Part No. 504 These flanges comply with the ASME. Code (1949) or [Link] ASME. Code (031). 4 lio lumihed te ASTM A11—Grode land A105—Grades | pelicable only to indicated facing, geiko, hub and bolting Lap Joint and Blind Flanges can alo be supplied for theve services, ‘ecestaling some variations iy hienos and other cimensions be: oute of changed design concions The wie of carbon steel bolts is intended, LLaiger oF Intemmediate sizes ore alto available ond dimensions ‘may be vaiied witout die expen 73 LADtS H CcOmTAR OLLE BD aU A LY LARGE DIAMETER FLANGES FORGED AND ROLLED STEEL 150 Ib. W.S.P. at 750° F. ASTM A105—Grade I4 mae uyape rmexness seen som git rte aa 26 31% 1% 29 28299754 L 29% 233% 1% 31 —~30x31 -99% Dh 31% w 30 35% 1% 33438334 31% 3% 34% 238 3m 1% 35 34x35 33% 35% 36% 1 34 40% 1% 37H 35 ITOH D4 c 30% 36 ANA 1% 39% —3THxI9H _37H__3T 3H 40% DRE 44 1% M14 39d 39% Ae AD 14046 1H 43 AAI ATH 4h Tow 40 4th N42 49 PAS Ade 444 4% Ay SECIFIED "401A 34D aaa dont Ta Tag Ta | 40 tka 289 53 249% ABAD 44 ATA PRISER 1% 50% 375 35 04-51% SOSH 50% 49% 4 1% 52% 430 51 2% 53% 553% 50% 514 Ah tag aaa 59% 2 56 Saxo 5A 534 SM aa 61% 2% 5856x5856 55 OSH mz ST 2M 64 62x64 62% —~5H 65% 682 734 3% 10 68x7068% OTA 6 3h ‘16h ‘TUxT6h THe 73% «OM 1153 cite arpu. 631% 1% 28x29 97% 97% 2% I 115, 28-33% 1% 30x31 99% 29% 4 _ 121 30 35% 32x33 31h 31% 36h 34% 138 32 37% 34x35% 33% 33% 136 36% 147 35%x37% 35% 356 3h 7361 38% 209 37Hx3% 37h 37% 3% 36 40% 248 pices 39x41 39% 39%e 3%H_——*TOME 96 42% 263 AiexAPh AV AT 4 SPEOIFIED "40144 BD oy ' A4xA5% 44% 43% PY AO AO MbxATI 46% 45% 4p PURCHASER” 40-11 48% 416 ABA AB ATH AY 401% 50% 423 NM 50x51%4 50% 49% 4 M4 1% 52% 485, 52x53 52% 51% de [441 54% 501 _caTION as 544 53'%6 | 5h TH 57% 629 56x58 56% S516 5% M4 1% 59% 649 62x64 68% 61% 5H 481% 65% 746 68x70 68% 68 «Oh 56 1% 7114 105 Toh ‘TaxI6%h_ 74% ‘14 641% 77% 1491 1 1 1 1 0 Ae ®O Welding Neck Part No. 505 Slip-On Part No. 506 See footnotes on opposite page. = 74 LADISH e@ourepetis so Q@uaAtLtIT Y FORGED AND ROLLED STEEL LARGE DIAMETER FLANGES ASTM A105—Grade | 300 Ib. W.S.P. at 750° F. oursoe rocnss oumeren conpassseo 8 OUNETER xara coweteR ee sxe sures crmaseo “isestos vaouen "or Orrunee rutioe race OAKEY SCE me a ee 7a (ra ieee Hy 29% | 2B%x2%e 27 Mh 31% 30x31 9 3% | 33% | 32v4x33% 3t 2% 35% | 344x93% 37% | 36Y6x37% TOBE | 40 3a 40% | 38%x40% 3 specirieo 40 Be 49% 40¥xd V4 40 434 Bie M44 ADexAd PURCHASER "44 545 3% 46% AAYaxAO 48 637 3% AB 46x 4 Mh 50% 48 %4x50% 48 884 Mh SI 50% 2% 48 920 ‘Pu ATION RamzZ OZ-orme 2 29% 2874n29% 38 238 2h 31% | 30x31 38 958 2% 33% 3914N33% a 32 303 9% | 35% 34Yn35% 5 36 336 PRICES Dh 37% 363TH 3 5% THE 40 | 1 364 3% 40% 38%x40% 5%q_ SPECIFIED "40 412 3% AI ADxAR I 5% YA. 501 | spe 3% 44% AD oxddv 5% _ PURCHASER 44 544 3% 46 AdihndO% 6h 48 638 _carion 3% 48% Ab %axABH oh 4 782 44 50% ABIxS0% 48% Th 48 399 4% 5% _5O%x52% 50% Th on on Welding Neck Part No. 508 Slip-On Part No. 509 Thos oge comely withthe ASME. Code (1949) or API- poe x shl to which fange it to ba welded, ASME. Code (1951). ‘Other Facing oe joins ean be furnished, but designs on this ‘A Alto fomished to ASTM A105—Grade Il and A181—Grades | applicable only to indicated focing, gasket, hub and bolt onl ar pecifed by purchater. Also available in ony elloy ot Lap Joint ond Blind Flanges can alo be supplied for those services. material which an be forged or rolled. The iss of clloy staal Bolts Intended. 20° bevel is standard, 3714" bevel optional when specified. Larger oF intermediate sizes ate al:o avcilable and dimensions may be varied without die expense, 5 76 LA DISH LARGE DIAMETER FLANGES 125 Ib, American Standard* ‘rae o rue 2 coNTR OLE sw oueren uameres amie x 4 ED QUALI Tay) FORGED AND ROLLED STEEL ASTM A181—Grade | oween ouneren MEH ae y Ww oves waves sete roms 344 2 36% 38% MY, AB M6 _ 48%, 50m 53 {55% 4 53 57% 50H 61% 64 66% B 3M 36% 38% Am 43 46 48% 50m 55% 57% 48 5% {302 52 54 60. 61% 64 6614 73 66-80 a 84 96. 86% 99% 113% he 2 4 he 2% 2% 2h 2% 2% Ye 2h on Th 3 28% 26% 5 30% 28% ‘Sve 30% 315% 35__| 33 | 5% 37 | 35] He _| 39% 37H 39% Toae A 5% SPECIFIED 43 5% BY 4514 5% PURCHASER AT 56 49% 5% 51% 5% 534 5% 58% 55% 6 3% 2 Whe We 24 %6 2% Dh 2h En Bh 654 61% Oh 28% % 30% Ie 39% 3% 35 35% a7]. | 31% | 39% 3% 4% 3 434 3h 46 4 Tose 48 4 spectro 2t%e 50. ae. BY 3% 52% atm PURCHASER 3% 54M oy 3 56% 58% 3% «65% 3% 3h wh Me Nh 78% 90% 109% 24H _3% 260 Dae 1% 4996 28) 1% 36338 1% 2 1% 424495 1% 454573 1% 47 620 364 49% 707 — 409% 51% 752 40, 1% 53% 19 a 1% 56 868 41% 38% 900 1k 601% 998 1% 69% 104 52 Th 6% 1346 2h 1% 1% 936 [281% 34 [981% 36 [981% 38% 321% 40% [32% 742% 3% 45 361% 47% 361% 499 [401% 5% 1% | 53% TM % 56 441% 584828 44th 60%, 923 44 1h 69% * 1024 32 1h Om «1954 32 1h 76 «1683 60 1h 82% 1922 64 8h 95% 9588 68% 108% 3284 ‘A5See other footnotes on opposite page, Welding Neck Part No. SIIA ° Flanges have same pressure ratings, general dimensions and dilings of 125 Ib. American Standard Cast kon Flanges, copt note identified by (*) asterisk. o——__% Slip-On Part No. 512A PLL carion prices cation LADIS H cONMTFROLLEDSDB Suk L 1 T ¥ FORGED AND ROLLED STEEL LARGE DIAMETER FLANGES ASTM A181—Grade I4 ware ane Vere _ SUMTER weowss WR OMMETEN ar —mereh ana oo vino ore nce ore mh ii rie ae bese me ics nsec rtm 21% 30% 51%6 98 1h | 34% 534 He | 33 51% 38) 1% | 37 | a 354 6 28th 39% +102 34 3% oh 28 th | Am 793 mcs 3 64 «TOE 98h | 48% 882 oh OH seuien 732 8% 969 he oh 82 hm Ae 1057 3% he _ PURCHASER "36, 50% 1158 316 52% | 1318 garion 3% 55 | 1493 3% 514 | 1536 4 60% | 1824 APPL. B44 531 28 37 | 637 28 394707 sh 28 4% 801 5m «TOKE ag 4% 289 54 smoreD "398% 46 ~~ OTDM 3h 1 38) mm | 48 —«t06R Sy PURCHASER "36 2% 50% 1172 oh 36% | 58% 1288 | eanoy % | 55 | 1397 | 57% 1510 60% 1797 apput y Q Welding Neck Part No. 513A Slip-On Part No. 514A 1 Aig lite AST ALI Giode and MO5—Gid| Fg ae one nor enn od ila nS ah OSTASE eee eine eel ger eres erect re ieee Lea Oe eT Mat he eof catonael been 30° bevel is standard, 3714” bevel optional when specified. Lap Joint and Blind Flonges can alto be supplied for those Mou ota eget aioe goals amin ot Se Horas dams ess Sidens Be isoninde dhe. oy ain otf aaa en Bae saan nama ee eae ereasras 7 LADIS H CcoNnTROLRLED Ba UAL AUT Y AMERICAN STANDARD 150 Ib. SEAMLESS LONG WELDING NECKS FORGED STEEL ASTM Aisi ow PL ccATION Unies otbervise spaced, 130-5, Seamless Long Wald, Necks wl be farted led nd th, Vg feh ie Included In iceness "OQ" and Le of ea oe tidied endibed ‘and ofsaficont thicknes to take refacing. ‘¢ Seamless Long Welding Necks with a nominal site of 12” Rave a eomosion allowance equal to the wall themes of Standard on Pipe sf conesponding size. For larger sizes the allow Be dren es oe mA Pore 7 eee : Ree rerum aereeeg ras a 40, “Prouure-Temperatire Rotingr—pager 263-868, pees iafaale Ranigrar ee en a iad Seer eat 150 Ib. SEAMLESS LONG reabloaste sags late spe WELDING NECKS Part No, 15L 178 La Se 12 6 c ON TROLLED QuaAtLITY AMERICAN STANDARD FORGED STEEL ASTM A181 300 Ib. SEAMLESS LONG WELDING NECKS vom bam oF 1B ‘mine THRE pi oe rE wea ha TH mt fo meen ua ee ite wiles ste He on aot fit fae [ae [ae [at fa fa ae | as fe fas [as [28 [as | fae fae | PL ccaTion All dinning sto inne fen eet iy Ones ee Unie tem specif, 20018, Seams Lo recess oa Tefen scat te aia + Seon Long Weld Nessie wonna ze of 12° ond male Pie ct cuemciey se: “Par leper doer €s Stowance shold Eo pendu'ty Beciyty smalls bore = Jie 12" ond lem! ce erties in eng pt 0” on pedal der i Rin ype Soe cogherpenn HetfoeCimenenl aac = ; Pe Tie oe ee ecere ace Ls BE tae gel oS Recency pine eis eee Sel rea eas nae ana eae ayhlonotse 2 tonite ale, crcid riers “ss! 300 Ib. SEAMLESS LONG WELDING NECKS Part No, 301 foce whi an as be funibed vndiled 4 Ww LADIS H 400 Ib. SEAMLESS LONG WELDING NECKS sens a 6 O:N T 8 O ft LE D oF QuaAatLti AMERICAN STANDARD FORGED STEEL ASTM A-105 TY agen | Ruma rewmuare ib" vayacr buy. Ou au oe au wouss ote ite "he 2% 3% "He A 3% mm 46 5 Ste 6% Lis prices Th Me oe 10% a3 APPLE Fi WARE corrion 1% 17% 1% 20% 1% 22% 1h 24% 1h 37 Ta 400 Ib. SEAMLESS LONG WELDING NECKS Part No. 40L 1% 32 ‘All dimanons hn niches Noda rs font bred, fsa end Coleridge Tones Geos ov tn nore fo 0048. fener Usln eiei snitgd 400s, Seren Long Weng Nec wil 3c fumished lec and with a Yi vatsed face which Ws not included eae eee cr aid eget RH tae nese fished wndailled ond of raliiont thine to take telacing + Scanlon Long Welding Nes nh noma ine of 12" end alr ten gon shone elt teal ings of Sang es pees in etic teh provided by speciying smaller bore: Kins Type Jai cielie"poges 162464, Dioandonel Tolwcrea— Tok UE Benacritecste Reh tet, easy, FetuhlSeaniea Uaes slay Nest cia tr orey pate the requiromonts of the latest APL-ASME Coder Fond 114 164,18" 0120" lng” Wl lied ev fr 19” Tovah Long Wotala Nace wi neces Tiaer St aelse onclcle Seeeictaete Fo Inman on tall el lloy sel and nonferost ntl (Scents ipso STS SEG Rceat Sat sea A LADIS H CONTROLLED Qq@uatit AMERICAN STANDARD FORGED STEEL ASTM A-105 wow ae oman oF foe ne over ‘iu ‘ia y mum Tewrare ayer ay. Cd woies ates Y 600 Ib. SEAMLESS LONG WELDING NECKS EA 2% 2% 3% 316 4h 5h 6 TM 8% PRICES: on neu exrion {All dimension sien tn inchs. Necks oe feria bored fad and AN eestor ley ota age Fornapoen Too, Tr thores sess, GOO, Seamlts Long Welding Necks wi Poles th ec es ead one nich pot need a Fete son eh Cong They conc be fumed Tine oS ataSen cine vats soe cares Pane Weldng Necks wh nomial ize o 12” ond mall fe eto catalan of ode en are core een “Fee get cs the alomanee hl onde ty etn nae He eee ee er 162164, Dingnionl Tlerncer— Fare, BMG, Presre-femporatare Retings—pages 262-268. arent Nie setae in ery, peslr fo et Sean of les AbLASME . tages 118, 18% 48 or 20" long. W Elan Lng Yoldioa Recs th nade reescePen cx sll del, lly sal ond gone fexgmloates Stpccun tts 250) tial Sptheaion page 8 4.3] [feet fF 600 Ib. SEAMLESS LONG WELDING NECKS Part No. 60L 181 LADIS 4H 900 Ib. SEAMLESS LONG WELDING NECKS Py sas oma i eqnmTrROLtLs ob snes a un, oF ‘ia QuaAti AMERICAN STANDARD FORGED STEEL ASTM A-105 T ¥ ‘inoue nn ae, oF Y sours went h "a he 1m h h 1% a 1% 1% Ve 1% 98 2 143 199 310 385 3 667 22 558 24% 670 27 949 29% 3514 1040 1775 Prices apt. coxTion Pe 900 Ib. SEAMLESS LONG WELDING NECKS Part No. 90L All dimension sien in inh. Neca fished bored ose, and pot foced or back faced. Standard Hongo Facin—pages 160461, {There dmendions ee te some ofr 15006, nies otari peclied, 900-1, Seam, Be fans cinoma fis leprae tore. Fig Tg et doe peae (GE, Dian Teter {ost Scent Lang "lag Nee te in every ponte die Rocks ah nec ong thon ied ews Fahad 12 12" length, Lo ‘able on specal order. For information on stainless stot, alloy steal ond nonfonous netal long necks, relr to pager 225.296, Material Speclicctions-page 243, EABDISON AMERICAN STANDARD FORGED STEEL ASTM A-105 me o nt runee mcs rove He c ON TROLLED ‘a8 y QuaAt ux. oF ates ine, i sous our eete T Y 1500 Ib. SEAMLESS LONG WELDING NECKS 1 “he Me 9 1 hk o4 Me Ey % th 9 9 9 1 % M% o% 1% 1% M% 5% 12 12 1% 8 He &% 12 % 118 1% TM! 12 11% 195 1p 9 19% 235 1% 15% 366 2h 19 610 oh 22% 1098 mH 25 1030 27% 1335 30% 1750 38% 2130 All dimensions olen in inches. Necks ave fished bored, faced, and ‘at faced or back laced. Stonaaed Flange Facingr=pager 160-161- Unless otherwise specfed, 1500c), Seamless Long Welding Necks wil be fished led and with a V4" rue face ich i no ncuced In Thicknore ca butt Included mena °Y"" They ean eso be fomished wndillod and of slit thickness to tate rfeeng. ‘Seamless Long Welding Necks with a nominal sir of 12” ond smellor fore conan lonaen og tothe ral ing of Standard fon prided yea mall tom aE ae Joint dotail—poges 162-164. Dimensional Tolerancos— 20. Protura-Tomperotare Retings—pager 203-268, min every porteular to Woh ised ore forthe i tonoe thon ited re vel & Mpa dears ‘ble on apoctl rae patentee (pope parse eerie —— EL ae Li ik Ww De zeal 39 3180 1500 Ib. SEAMLESS LONG WELDING NECKS Part No. 150L 183 184 LADISH 2500 Ib. SEAMLESS LONG WELDING NECKS cON TR OL h & b QUALITY AMERICAN STANDARD FORGED STEEL ASTM A105 nro puta wos sours enous 4% 5% 3M om Mh on 1% 9 ‘pL anion 1% 8 1% % 2 12 me 14% Qe 17h 2500 Ib. SEAMLESS LONG WELDING NECKS Part No, 250L sk, All dimensions givon in Inchos. Nacks ate fumished bored, faced, and spot faced or back faced. Stondard Flengs: Facings—poges 160-161. th of Scamio Long Welding Mocks oth nomic! sie of 12" te ol ove a ecrode alowcace mca oe val Sram of Reese Seana clare a ler en alovencs nd be potcd CF cog fa ye at lipo $62.64, Dineen! al aoe Face eee ee LLadish, Seamless Long Welding Necks conform in every Paitelar to tho requremonts af fe latest APLASME Coda. Fer information on stains sto, alloy steel ond nor foroue otal fang necks afr to pages 225.236, Material Spece Reetionepape £43, | LADISH CONTROLLED QuALITY TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION FORGED AND ROLLED STEEL FLANGES In the following section are tabulated the dimensions of flanges for use with TEMA Class R, C and A heat ex- changers. This data has been derived from the 1952 edition fof the Standards of Tubular Exchanger Manufacturers Association and is presented with the permission of that Association. The Standards of the Tubular Exchanger Manufacturers Association classify heat exchangers as follows: CLASS R heat exchangers are designed to meet the safety and severe requirements of petroleum refineries cand similar applications, CLASS C heat exchangers are designed for maximum economy and overall compactness to meet the safety cand service requirements of commercial and general process applications. CLASS A heat exchangers are designed for maximum economy and overall compactness to meet the safety and service requirements of heat exchanger porating alloys and special materials of construction. The flange dimension tables have been aranged to show the dimensions of the various flanges according to the size shell with which they are intended to be used. to the designer, maximum values for the hub diameter at base and at welding end have been established in the tables that follow. The hub diameter at base of the Channel End Shell Flange is based on maintaining mini- ‘mum required wrench clearance. This maximum diameter in combination with the hub slope, that has been set in the design of each flange, establishes the maximum hub di- ameter at the welding end. Although wrench clearance does not limit the hub diameter at base of the Cover End Shell Flange, the maximum diameter is set by maintaini the established hub slope. rensions for flanges having inside diameters other ‘than those listed in the tables may be determined by inter= polation on the following basis: (@) The cross sectional dimensions of the flange shall be the same as that of the nearest standard size, the half-way point to be govemed by the next larger si (b) The number and size of bolts shall be the same as those of the nearest standard size, the half-way point to be governed by the next larger size, The design of these flanges is alto based on the gasket characteristics and the corrosion allowances, which are tabulated on pages 186 and 187. 185 LADISH co N T'R Oo LL E D CRU Nelle tin? GASKET DATA FOR TEMA FLANGES ‘The type and diametral dimensions of the gaskets that jacketed asbestos, 2.50 for compressed asbestos, and 1.25 ‘are intended for use with the [Link].A. flanges listed on the for the rubber type. The minimum design seating stresses are: following pages are tabulated below. The gasket com- 9000 psi for the metal jacketed asbestos, 4500 pi for the pression factors used in the design are: 3.75 for metal compressed asbestos, and 400 psi for the rubber type. GASKET DIMENSIONS FOR TEMA FLANGES THETA REED HOTS CRETE rasa cade Sn eases. cases et ‘as0't6. tor’ stn ‘300 1. oo oo 2. ow hh % ih ‘th he 10% 10%, HHH 5 9 10H Oi 10m 1H 1th 1% 1H 1h 12 13% «14% «13%H 1h 13% «Mle 1318 13015 15% 15 15% 154 15 Ath 15% 1a 1s tar | im | 7 1Th Ah 17h 16h 1TH 101 ete a ise 19% 19h 18% 19H 10% TH 2 Bohm BY iy rae ee ae Boo | ame 28 24-8 mH 8PM 23 2544 26 25% 26 254, 26%, 24% 54 24% 5 Bl = | Rk 1s, (a is eels eles le BUS a a ee Stn ay | anh ayaa ae 0m ate a = 31 32% 33% 3h 345 35% 34% 36. 32% 3344 33% 34Yq 8 | | we SSSR SSE ed 36% 37% 38% 38% 39% 38% 40Y 36% 31% 37% 38% 7 39 39% 40% 40%, Ae 40%, Ae 38% 30% 39% A BR Pe |e es, Ue | SL ee | apa ae ae a a a a 48% 51M ih 4h 6 e449 50 Tareas TOs THETA ERED TOE a Uses eat assts at cuss a Uses at 8 fel 7548. 215048, 7518. 130 Ln 300 1s. ‘300 be mice FCT CNY TL (Oona ew ae ta a 6 Th | ™ eh ‘hh th) ™h Th : hh Oh | hh Oh OO 10 ae Lane | as” | atte |e | aa | ae | ame | 12 4%) 4) me A | tm | tam |e % 134 Wk 14 | ho a1 3B Th teh tT teh tte TA toe tT yeas 17 19h 18% 19% 18h 194” —*18H—«H:CNH! 1TH 1 (hOB FH BIH GOH TH OH TH Gon mh tk ork SMe tk ae to aah 9h BHIe Ht rc rc 28 Bh Bh BE RR ae tm A Hm tm | tm BABI 3% | 29 30% 3% > 30% =H ~—30H=«H OHH oak tam ae hak aaa ka | aM __0% 30h 37h 37h «38% “Inside diameter: forthe Shall Cover Flange forthe 75 Tb, 150 Tb., and 300 Ib. Cl “43° and 46" instead of 48” ond 47” reapectively “Rubber of similar (Durometer"C" not to exceed 60”). Cand Clase A Exchangers ore LADtIS H CeonWwreoitesb QUALITY CORROSION ALLOWANCES Conosion allowances listed below are equal to the difference between the minimum hub thicknesses, as established in the [Link].A. Standard, and the hub thicknesset which have be determined from the diameters at the welding end in the flange tables that follow. Since these conrsion allowances are applicable only to the flanges as tabulated, the following table has been pre- pated to enable the designer to readily determine the allo tance when either the LD. or O.D. of the hub of a flange is varied from the tabulated values. The actual corrosion allow- dances for any flange of lesser or greater hub thickness can be determined by adjusting the tabulated corrosion allowance by the difference between the tabulated hub thickness and Tae 300 18.

You might also like