NEED

FORMWORK?
NEED FTI GROUP

[Link]
 Innovative formwork from
the formwork innovators.
FTI Group is an Australian family owned and
operated company that are leaders in prefabricated
concrete formwork systems designed to make your
build faster, safer and simpler.

FAST TREAD®
SIMPLE
A simple, fast & safe Easy to order, shop drawn based on your
architect’s and engineer’s specifications
permanent formwork
system for concrete stairs FAST
Made in Australia, delivered with in-built
in multi-level buildings. steel reinforcing, add Safe-T-Tread™ reusable
tread system for instant upper level access
before stairs have been core filled.
Our Fast Tread® stairs are shop drawn and
custom manufactured in our Australian
manufacturing facility to your exact reading SAFE
Manufactured to BCA Requirements,
level’s and widths, reducing the potential for preinstalled handrails provide fall protection
error and increasing installation speed.

EASY
Finished with only a single concrete pour,
The team at FTI Group have extensive experience in installation requires less propping than
conventional framework
the construction industry and have been manufacturing
prefabricated formwork systems for over 25 years.
QUALITY
Galvanised stringers and risers provide
The FTI business’s foundations have been build on high quality, durable surfaces without the need to coat,
compliant products coupled with offering expert technical whilst but are a suitable substrate for painting,
tiling or carpet.
ensuring our customers receive exceptional service.

Our range of products include preformed stairs, beams, hobs and metal COMPLIANCE
Compliant with the relevant Australian
decking as well as a suite of complimentary ancillary products. Standards for your peace of mind.

If you need formwork, then you need to speak to the team at FTI Group.

[Link] I 1300 751 701 Making your project faster, safer, simpler.
 How is Fast Tread®
made and installed? Handrail Options

Flight Parameters Starter Flight Intermediate Flight

risers [email protected] = 1550 Typical Riser Detail
TICK TICK
lower landing thickness 0
upper landing thickness 190 aprox.25mm
throat thickness 190 343.3 (5 Deg)
width of stair 1005
formwork setback 343.3
Slab

Slab

long axis rebar 8No N12 293.3

short axis rebar N12 @300
concrete volume 0.93 m3

50.0
Finish RL. see table
190.0

8@250 = 2000
[email protected] = 1550

1. 3 RAIL
250.0
19
172.2

0.0

Start RL. see table

369.1
Start Finish Mark Handrail Bracket Handrail Bracket
Special Notes
StairID Shaft No Start RL Finish RL
level level No. LH LH RH RH

1205-001 Stair 1 B2 42340 B2.1 43890 A None External 3 rail External

Project No 1205 Site Address 6A-8 Monash Rd Gladesville Flight: A Revision 0

Approved: Henley Constructions Erection Notes
R
All rights reserved. No part of this drawing/design/detail may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, Read and understand erection manual before installation
Install By concrete formworker
recording, or other electronic or mechanical methods, without the prior written permission of FTI Group Pty Ltd. No drawing produced by FTI Group Pty Ltd may be Install Handrails at the correct height (900mm from tread nosing) PHONE: 1300 751 701
Check all bolts are tight PO BOX 923 MOSS VALE NSW 2577
used by any party other than FTI Group Pty Ltd for the manufacture of the drawn product herein . For permission requests write to FTI Group Pty Ltd. Install stanchion bracket bolts with nuts to the outside
sales@[Link]

SHOP DRAWINGS & SCHEDULING PRODUCTION DELIVERY INSTALLATION & BRACING

We shop draw your Fast Tread® Down to the millimetre, we We deliver your stairs direct Your stairs are installed and braced
stairs based on your engineer’s manufacture your stairs to the to your site or yard. Each one level at a time. Handrails can
specifications and construction shop drawings, ensuring they’re one is clearly labelled with its be fitted prior to installation giving
drawings. ready when you need them. location ID. immediate edge protection. 2. WALL MOUNT

3. VERTICAL PICKET

REINFORCEMENT UPPER LEVEL ACCESS CORE FILL HANDRAIL BENDS

Fast Tread® stairs come with Place in Safe-T-Tread™, our Fast Tread® stairs are typically Once the stair shaft is stripped of
reinforcement pre-welded into temporary tread system, core filled with the slab above. formwork and lights are installed,
the flight to your engineer’s to provide safe and instant Fast Tread® stairs have a screed our Fast Tread® Site Linkage Team
specifications. Your steel access to upper levels prior fold in the riser for the concreter will weld the connection between
4. SINGLE RAIL
fixer provides the lapping to core fill. to screed to, ensuring 100% handrails on your site, making the
reinforcement to the landings level treads. handrails continuous and BCA
and slabs. compliant.

[Link] I 1300 751 701 Making your project faster, safer, simpler.
 BLUEDECK™
A faster & easier metal
decking formwork system
Our BlueDeckTM system is a rigid permanent metal
decking formwork for simplifying the construction
of suspended concrete slabs. It’s made in our
Australian manufacturing facility from high-tensile
steel and offers high spanning capabilities.
The durable galvanised finish creates a neat, clean, SPAN TABLES
low maintenance ceiling finish.
Maximum slab spans, mm
BlueDeck™ sheets continuous over single slab
BlueDeckTM comes with a signature Blue anti-glare span Formwork deflections limit L/240
(Visual appearance important)
coating that’ll reduce heat and glare off the deck
during the warmer months.

BLUEDECK™ BMT THICKNESS – 0.75MM BLUEDECK™ BMT THICKNESS – 1.0MM

BlueDeckTM is the ideal solution for a range of
L/240-Visual Quality Important L/240-Visual Quality Important
applications including carparks, office buildings, Slab Slab
Single Span Two Span Continuous Span Single Span Two Span Continuous Span
hospitals as well as deep beam style slabs. thick
ness
thick
ness
(mm) Un 2 Un 2 Un 2 (mm) Un 2 Un 2 Un 2
1 Row 1 Row 1 Row 1 Row 1 Row 1 Row
propp Rows propp Rows propp Rows propp Rows propp Rows propp Rows
Props Props Props Props Props Props
ed Props ed Props ed Props ed Props ed Props ed Props

100 2150 5850 8150 2900 5550 8350 2700 5550 8350 100 2350 6500 9050 3250 6150 9250 3000 6150 9250

110 2050 5700 7900 2850 5400 8100 2650 5400 8100 110 2250 6350 8800 3150 5950 8950 2900 5950 8950

120 2000 5550 7700 2750 5250 7850 2550 5250 7850 120 2200 6150 8550 3050 5800 8750 2850 5800 8750

130 1950 5400 7500 2700 5100 7650 2500 5100 7650 130 2150 6000 8350 3000 5650 8500 2750 5650 8500

140 1900 5300 7300 2650 5000 7500 2450 5000 7500 140 2100 5900 8100 2950 5550 8300 2700 5550 8300

150 1850 5200 7100 2600 4850 7300 2350 4850 7300 150 2050 5750 7900 2850 5400 8100 2600 5400 8100

160 1750 5050 6900 2500 4750 7100 2300 4750 7100 160 2000 5650 7700 2800 5250 7900 2550 5250 7900

170 1750 5000 6750 2500 4600 6950 2250 4600 6950 170 1950 5550 7500 2750 5150 7700 2500 5150 7700
FAST LEAD TIMES
BLUEDECK TM
PROFILE 180 1700 4900 6550 2450 4500 6750 2150 4500 6750 180 1900 5400 7350 2700 5000 7550 2450 5000 7550
Manufactured in Australia, we can get stock
to you where you need it, when you need it. 190 1650 4750 6400 2350 4400 6600 2100 4400 6600 190 1850 5300 7200 2650 4900 7350 2400 4900 7350
25.9 28
200 1600 4650 6250 2300 4300 6450 2050 4300 6450 200 1850 5200 7050 2600 4800 7200 2350 4800 7200

THICKNESS 210 1550 4550 6150 2250 4200 6300 2050 4200 6300 210 1800 5050 6900 2500 4700 7100 2300 4700 7100
0.7mm or 1.0mm
52.5

53.5
220 1550 4450 6000 2200 4100 6200 2000 4100 6200 220 1750 5000 6800 2500 4600 6950 2250 4600 6950

230 1500 4350 5900 2150 4050 6050 1950 4050 6050 230 1700 4900 6650 2450 4550 6850 2200 4550 6850
GALVANISED ZINC COATING 332
240 1500 4300 5800 2150 3950 5950 1900 3950 5950 240 1700 4800 6550 2400 4450 6700 2150 4450 6700
Z350 in conformance with AS1397
250 1450 4200 5650 2100 3900 5850 1850 3900 5850 250 1650 4750 6450 2350 4400 6600 2150 4400 6600

*300 1200 3100 3300 1500 3250 4200 1450 3250 4300 *300 1400 4000 4050 1850 3450 4300 1550 3500 4450
CUSTOM LENGTHS
*350 950 2500 3650 1100 2650 3700 1200 2700 3750 *350 1050 2650 3700 1150 3350 3800 1250 2800 3800
Made to suit your project requirements

YIELD STRENGTH
550 mpa NOTES:
1. These are formwork selection tables only. Maximum slab spans in these tables shall be designed by a qualified structural engineer.
2. Prop must be equally spaced between the span and prop bearers & support widths should be minimum 100mm.
3. 1 kPa Live Load due to stacked materials is used – this shall be indicated on formwork documentation and controlled on-site.
ANTI-GLARE COATING
4. Refer to General Engineering Notes Section 3.1 when using these tables.
5. Care must be exercised when placing concrete to avoid excessive mounding.
6. Spreaders shall be provided to prevent any concentrated loads being applied to the sheeting, in particular, avoiding direct point loading of
COMPLIANCE the sheet overlap ribs and unsupported edges of the sheeting.
Compliant with the relevant Australian 7. When using the table for two or more spans the adjacent spans should not differ in length by more than 5%.
Standards for your peace of mind.
8. *300/*350 slab should be designed under the typical reinforced slab AS 3600-2009 by a qualified structural engineer.

[Link] I 1300 751 701 Making your project faster, safer, simpler.
 Our Ancillary Products

We have a broad range of ancillary formwork products

designed to make your job faster, cleaner and simpler

SAFE-T-TREAD™ Instant access to deck

RISER
For instant access to
PROTECTION FILM
Safe access to deck

upper levels An innovative solution

Safe-T-TreadTM is a simple temporary, Eliminates damage to risers protecting from concrete splatter
reusable tread system that locks into and reducing cleaning costs.
the frame of Fast Tread’s preformed
Durable non-slip steel A protective film applied to the risers of our Fast Tread®
stairs for immediate, safe access to
upper levels before the stairs have stairs during manufacture. Our projection film is designed
been core filled. to make the clean-up process faster, simpler and easier.
Easily removable for core fill

Easy peel off after core fill

Significantly reduces cleaning time,

costs and labor

Protects risers from concrete splatter

[Link] I 1300 751 701 Making your project faster, safer, simpler.
 FASTBEAM™
FASTHOB™
A super-fast preformed beam solution
A faster & simpler hob frame system
FastBeam™ is a prefabricated concrete beam formwork
A preformed hob frame system, custom made to your system. It’s designed to support the spine or dividing wall
project requirements designed to simplify and speed up (Hebel, Speed Panel or Blockwork) between Fast Tread®
the construction of water barriers between inside living scissor stairs in multi-level stair applications.
and outdoor areas.
Shop drawn and fully prefabricated with reinforcement
The FastHob™ System is used to separate apartments preinstalled, its saves time on site and eliminates the need for
and balconies in apartment complexes an acts as a water a load bearing spine wall in your scissor stairs.
barrier between these two indoor living and outdoor areas.

Fully prefabricated
No need for stripping with reinforcement pre-installed
saving time onsite

Minimal waste Eliminates the need for a spine wall

Reduction in cleaning costs and labour in scissor stair applications.

Square and straight with no warping

Made to your exact project Minimal propping required
measurements.

[Link] I 1300 751 701 Making your project faster, safer, simpler.
 HANDRAIL SERVICES
We offer heavy-duty galvanised handrails for all
your handrail requirements including:
- Handrail refurbishment
- Removal of old handrails, and installation of new replacement handrails
- Custom handrails
- For use in ramps, carparks and fall barriers
- Handrails for conventional stairs

Our subcontractors are already

inducted on your site

Custom-made
To suit your specific project requirements

Quality assured
Durable product workmanship

Fast lead times

and quick installation

Outside of hours installation

for minimal access BLUEPLY™
Our BluePly™ is F17 Grade cross laminated
construction plywood perfect for use as formwork.
BluePlyTM is produced for concrete formwork. In addition to concrete
formwork applications BluePlyTM can be used in any application that
requires a known structural strength and performance.

Available sizes:
- 1200mm x 1800mm x 17mm

F17 Grade Plywood complies with the Performance Requirements of:

- AS 6669:2007 – Plywood – Formwork (Class 2)
- AS/NZS 2269.0:2021 – Plywood – Structural
- AS/NZS [Link] – Plywood – Structural
- AS/NZS 2269.2:2007 – Plywood – Structural

[Link] I 1300 751 701 Making your project faster, safer, simpler.
 Our quality, Our in-house experts
Our reputation are on-hand to provide
you with specialist
We understand the importance of technical advice.
manufacturing and supplying a quality product.

You can be confident that all FTI Group Talk to our experts. We offer a wealth of
Products comply with the relevant technical reference coupled with
Australian Standards including: in-house expertise.
This ensures our customers can access the
• BCA 2016 Amendment 1 Part B1
very best technical advice for their project.
• AS/NZS 1170.1-2002.

Ask us about our specific compliance

documentation for our range of products.

We’re also JAS-ANZ ISO 45001 which means that our

OH&S Management System has been certified.

ISO 45001

[Link] I 1300 751 701 Making your project faster, safer, simpler.
PO Box 1103
Goulburn NSW 2580

1300 751 701

sales@[Link]
[Link]
AUG 2021