Scribd
Upload
484 views2 pages

A182-F51 Material Specification Guide

This document specifies material and quality requirements for H521 Rev C – A182-F51 (UNS S31803) forged bar and closed die forgings. Key requirements include a chemical composition range, mechanical properties testing to ASTM standards after heat treatment, 70J Charpy V notch impact testing at -50°C, corrosion testing per ASTM G48, and micrographic examination requirements. Quality requirements include 100% ultrasonic testing, freedom from defects like slag inclusions, and certification to EN10204-3.1 including chemical analysis and heat treatment reports.

Uploaded by

Amjath Pallas
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
484 views2 pages

A182-F51 Material Specification Guide

This document specifies material and quality requirements for H521 Rev C – A182-F51 (UNS S31803) forged bar and closed die forgings. Key requirements include a chemical composition range, mechanical properties testing to ASTM standards after heat treatment, 70J Charpy V notch impact testing at -50°C, corrosion testing per ASTM G48, and micrographic examination requirements. Quality requirements include 100% ultrasonic testing, freedom from defects like slag inclusions, and certification to EN10204-3.1 including chemical analysis and heat treatment reports.

Uploaded by

Amjath Pallas
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

MATERIALSPECIFICATION

H521RevCA182F51(UNSS31803)
Rev C B A Date 02.01.08 14.03.05 01.02.05 ECN 249 119 116 Issue Revised/Reissued Revised/Reissued Revised/Reissued Preparedby T.S. N.R. A.K. Check/Approved J.S. T.K. N.R.

ProductForm Standard Grade AcceptableClass ForgedBar ASTMA182 F51(UNSS31803) Blank Ring ClosedDieForgings Scope Thisspecificationoutlinesthemodificationsandadditionalrequirementstothe relevantASTMSpecificationsforthesupplyofrawmaterialtomanufactureVector Internationalproducts. Other ASTMA370/A388/E562/G48(LatestIssues) Applicable Specifications SteelMaking ManufacturetobeinaccordancewithASTMA182(LatestIssue). HeatTreatment SolutionAnneal(1050Cminfor1hrmin)inaccordancewithASTMA182(Latest Issue).Furnacesshallbecalibratedwithcertificatesbeingavailableforreview uponrequest. Chemical Min Max Min Max Min Max Analysis% 0.02 0.03 0.15 0.20 C S N (Heat) 1.00 4.50 6.50 Si NiCr Mn Mo 21.00 23.00 PREN 35 2.00 P 0.03 2.50 3.50
Note:PREN=Cr+3.3Mo+16N

Mechanical Properties

Tensile(Rm): Yield(Rp0.2): Elongation(A%): [Link](Z%): Hardness:

Min 98600psi(680MPa) 65250psi(450MPa) 25 45

Max 28HRC

Note:[Link] foreachheatandheattreatmentlot.

Impact Properties

CharpyV.70J(Ave),65J(Min)at50C. LateralExpansiontobe0.38mmmin.

MATERIALSPECIFICATION

H521RevCA182F51(UNSS31803)
Corrosion Testing Micrographic Examination CorrosiontesttobeinaccordancewithASTMG48MethodA(LatestIssue)for24 [Link] pitting. [Link] structureshallconsistof40%60%ferritemeasuredinaccordancewithASTM E562(LatestIssue)andshallbefreefromgrainboundarycarbides,sigma,chiand lavesphases. TestCoupons(testbarsmaybeused)shallberepresentativeofproduction forgingsandshallbeheattreatedwiththeforgingsinaccordancewithASTMA182 (LatestIssue).Testcouponsshallalsoreceiveessentiallythesameforging [Link] productionforgingswhencloseddieforgingsareused. 100%UTonOpenDieForgingsandBar(afterfinalheattreatment)inaccordance withASTMA388,[Link]. [Link] beundertakenbyVectorInternationalLtd. Forgingstobesuppliedfreeofdefects(Slaginclusions,scale,laps,cracks). Weldrepairisnotacceptable. ForgingstobemarkedwithHeatNumber,MaterialGrade,andVector Specification. CertificationtobeinaccordancewithEN102043.1:ChemicalAnalysis,Mechanical Analysis,HeatTreatmentReport(soaktimesandcoolingmedium),MillCertificate (WetStamped). 1. RefertoPOforsupplementaldetails. 2. Anydeviationfromthisspecificationmustbeformallyraisedasaconcession [Link].

TestSampling

N.D.E SurfaceFinish andQuality Repairof Defects Marking Certification

Notes

You might also like