Scribd
Upload
43 views5 pages

Pinout (Normal) : Series "A" Plugs Are Used Towards The Host System and Series "B" Plugs Are Used Towards The USB Device

The document describes USB pinouts and specifications. It explains that Series A plugs are used towards the host and Series B towards devices. It provides details on pin assignments and functions for standard USB, Mini USB, and USB 3.0 connectors. It also outlines USB specifications for bandwidth, power usage, voltage, shielding, cable types and lengths.

Uploaded by

caiosuz
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
43 views5 pages

Pinout (Normal) : Series "A" Plugs Are Used Towards The Host System and Series "B" Plugs Are Used Towards The USB Device

The document describes USB pinouts and specifications. It explains that Series A plugs are used towards the host and Series B towards devices. It provides details on pin assignments and functions for standard USB, Mini USB, and USB 3.0 connectors. It also outlines USB specifications for bandwidth, power usage, voltage, shielding, cable types and lengths.

Uploaded by

caiosuz
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

Pinout (Normal)

Series "A" plugs are used towards the host system and series "B" plugs are used towards the USB device.

Pin Name Description

VBUS +5 VDC

D-

Data -

D+

Data +

GND

Ground

Pinout (Mini)
Mini-A:
54321 _______ \/ -----

(at the cable)

Mini-B:
54321 _______ \/ -----

(at the cable)

Pin Name

Description

VBUS +5 VDC

D-

Data -

D+

Data +

Mini-A: Ground Mini-B: Not connected

4 5

ID

GND

Ground

Pinout (USB 3.0)


Connectors are backwards compatible with USB 1.1/2.0. The original 4 pins are still there. Expected transfer rate 4.7Gb/s.

Pin

Name

Description

VBUS

+5 VDC

D-

Data -

D+

Data +

GND

Ground

USB3_RX USB 3.0 Data Receive (differential)

USB3_RX USB 3.0 Data Receive (differential)

GND

Ground

USB3_TX USB 3.0 Data Transmit (differential)

USB3_TX USB 3.0 Data Transmit (differential)

Technical specs
Features

True Plug'n'Play. Hot plug and unplug Low cost Easy of use 127 physical devices Low cost cables and connectors

Bandwidth

High speed: 480 Mbps speed (in USB 2.0 and above) Full speed: 12 Mbps speed (requires shielded cable) Low speed: 1.5 Mbps speed (non-shielded cable)

Definitions
USB Host = The computer, only one host per USB system. USB Device = A hub or a Function.

Power usage:
Bus-powered hubs: Draw Max 100 mA at power up and 500 mA normally. Self-powered hubs: Draw Max 100 mA, must supply 500 mA to each port. Low power, bus-powered functions: Draw Max 100 mA. High power, bus-powered functions: Self-powered hubs: Draw Max 100 mA, must supply 500 mA to each port.

Self-powered functions: Draw Max 100 mA. Suspended device: Max 0.5 mA

Voltage

Supplied voltage by a host or a powered hub ports is between 4.75 V and 5.25 V. Maximum voltage drop for bus-powered hubs is 0.35 V from it's host or hub to the hubs output port. All hubs and functions must be able to send configuration data at 4.4 V, but only low-power functions need to be working at this voltage. Normal operational voltage for functions is minimum 4.75 V.

Shielding
Shield should only be connected to Ground at the host. No device should connect Shield to Ground.

Cable
Shielded

Data: 28 AWG twisted Power: 28 AWG - 20 AWG non-twisted

Non-shielded

Data: 28 AWG non-twisted Power: 28 AWG - 20 AWG non-twisted

Power Gauge Max length

28

0.81 m

26

1.31 m

24

2.08 m

22

3.33 m

20

5.00 m

Cable colors
Pin Name Cable color Description

VBUS Red

+5 VDC

D-

White

Data -

D+

Green

Data +

GND

Black

Ground

You might also like