0% found this document useful (0 votes)
434 views1 page

Standard Plan Evaluation Checklist

This document appears to be a standard checklist used to evaluate building plans for a permit application. It contains sections to check conformity of zoning, architectural, structural, plumbing/sanitary, mechanical, electrical, and electronics plans based on various codes and requirements. Plan evaluators will use this checklist to ensure submitted plans meet all necessary standards before approving the permit.

Uploaded by

ar des
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
434 views1 page

Standard Plan Evaluation Checklist

This document appears to be a standard checklist used to evaluate building plans for a permit application. It contains sections to check conformity of zoning, architectural, structural, plumbing/sanitary, mechanical, electrical, and electronics plans based on various codes and requirements. Plan evaluators will use this checklist to ensure submitted plans meet all necessary standards before approving the permit.

Uploaded by

ar des
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Control No.

:
Applicant Name :
Project Name : Date/Time Received:
Project Location: Date/Time Printed:

STANDARD PLAN EVALUATION CHECKLIST


As per Section 302 of P.D. 1096 Rev. IRR

Assigned Plan Evaluator: _____________________________________________ Assigned Plan Evaluator: _____________________________________________


ZONING OFFICE STRUCTURAL PLANS
CONFORMING 1. Construction Notes/Guidelines and Specifications
NON-CONFORMING 2. Structural Plans - as per Structural Design and Computation
ARCHITECTURAL PLANS a. Foundation Plan/s e. Structural Design Analysis
1. Standard Form (Type A1) for Bldg Plans b. Floor Farming Plan/s
(Complete with Borders and Title Block ) c. Roof/Roof Deck Framing Plan/s
2. Lot Plan - showing Orientation, Bearing, Distance, Adjacent d. other Details as deemed needed
roads, access roads and properties, Indicate Lot Area 3. Structural Details:
3. Site Development Plan - indicating the following: a. Schedule of Slabs/Slab Details
a. Drawn to Scale b. Schedule of Beams/Beams Details
b. with Technical Description and Orientation c. Schedule of Columns/Columns Details
c. Setback/Easement requirements d. Schedule of Footings/Footing Details
d. Indicate adjacent roads and lots e. Schedule of Trusses/Truss Details
e. Parking Layout f. other Details as deemed needed
: req'd = _______________ ; supplied = _________________ (Fc = ________________ Mpa) ; (Fy = ________________ Mpa)
4. Restrictions: AbuTments and Firewalls g. Soil Test
5. Vicinity Map/Location Plan - within 2km radius for (SBC = ________________ Mpa)
Commercial, Industrial and Institutional Complex
6. Perspective - Eye level or Bird's Eye View Assigned Plan Evaluator: _____________________________________________
7. Indicate Column Gridlines & Dimensions - site dev't, PLUMBING/SANITARY PLANS
all floor plans, elevations and sections, blow-up details 1. General Notes/Guidelines and Specifications
8. Floor Plans - min. scale of 1:100m, indicating doors and 2. Plumbing/Sanitary Plans
window labels, room labels and complete dimensions a. Potable Water Supply Layot/Hot and Cold Line
9. Min. of 4 Elevations and 2 Sections - showing natural b. Sewer/Soil pipe Line Layout
ground to finish grade elev, floor to floor heights c. Storm Drainange Layout
10. Stairs/Access - blow-up plans and sections d. Isometric Drawing
(comply with P.D. 1096 and B.P. 344) 3. Plumbing/Sanitary Details:
11. Toilet and Bath Details - blow-up plans and sections a. Septic Tank/Vault Details - must slab flooring
showing specifications of finishes and fixtures. b. Area Drain/Catch Basin Details
12. Kitchen Details - blow-up plans and sections c. Toilet Fixtures mounting and connection Details
showing specifications of finishes and fixtures. d. Kitchen Fixtures mounting and connection Details
13. Doors and Windows Schedule - blow-up details e. Hangers and Support Details; Legends
showing the type, location, material/finishes, and quantity f. other Details as deemed needed
14. Roof Plan/Roof Deck Plan - indicate in the Project Title f.a. STP
if Roof Deck is Passable or non- passable. f.b. Oil and Water Separator
15. Other Architectural Details: (as needed) 4. Vicinity Map
a. ___________________________________ Assigned Plan Evaluator: _____________________________________________
Lot Area: ________ m² ; Floor Area: ________ m² MECHANICAL PLANS
Assigned Plan Evaluator: _____________________________________________ 1. General Notes/Guidelines and Specifications
ELECTRICAL
ELECTRICAL PLANS
PLANS & SPECIFICATIONS
2. Mechanical Plans/Legend
1. LOCATION1. General Notes/Guidelines and Specifications
& SITE PLANS a. A/C Layout/HVAC/AFSS/Elevators
2. LEGEND OR SYMBOLS
2. Electrical Plans/Legend b. other Details as deemed needed
3. GENRAL NOTES AND/OR SPECIFICATIONS
4. ELECTRICAL LAYOUTa. Lighting and Power Layout, indicate switches 3. Mechanical Details:
5. SCHEDULE OF LOADS
b. other Details as deemed needed a. Schedule of Machines/Equipment
6. ONE LINE DIAGRAM
7. DESIGN3.ANALYSIS
Electrical Details: b. Typical Connection/Support Details
a. Branch Circuits, sub-feeders,
a. Schedule feeders,
of Loads andbusways & service entrance
Computation c. Blow-up Details/Single Line Diagaram
b. Types, ratings & trip settings of overload protective devices
b. Voltage
c. Calculation of Riser Diagram/Single
drop Line Diagram d. other Details as deemed needed: ______________________________
d. Calculation c.
of Panel
short circuit
Boardcurrent for determining
Details/Circuit BreakertheDiagram
interrupting 4. Vicinity Map
capacity of overcurrent protective device for residential commercial
& industriald.establishment
Design Analysis
e. Protection coordination of overcurrent
e. Short Circuit protective devices
Calculations Assigned Plan Evaluator: _____________________________________________
f. Arc-Flash Hazard Analysis to determine the required personal
f. Voltage Drop Calculations
protective equipment (PPE) in other than dwelling place (see ELECTRONICS PLANS
Appendix H forMap
4. Vicinity PEE) 1. General Notes/Guidelines and Specifications
g. Certification of Electrical Safety from (PEE) for Existing Bldg.
/Expansion /Extension of a Bldg. Structure. 2. Electronics Plans/Legend
a. Data and Voice, Tel, PABX, FDAS, CCTV, CATV
b. other Details as deemed needed
COMMENTS: 3. Electronics Details:
_________________________________________________________________ a. Schedule of Equipment
_________________________________________________________________ b. Typical Connection/Support Details
_________________________________________________________________ c. Blow-up Details/Single Line Diagram
_________________________________________________________________ d. other Details as deemed needed: _____________________________
______________________________________________________ 4. Vicinity Map

APPLICANTS MAY USE THIS BOX FOR DISCUSSIONS AND/OR CLASSIFICATIONS


_____________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________

You might also like