2

016x750 LG DOWEL
/ /
016x750LG DOWEL
MAX 1 @400 OC, ONE SIDE @400 OC, ONE SIDE
FINISH GRADE CHAMFER 20
GREASED w/ EXP CAP GREASED w/ EXP CAP

60
BATTER 12 (TYP) W1 (SOLID SODDING)
EARTH SIDE

0
SIM 100
TRENCH INDUCED CRACK
(TYP)
SEE CIVIL DWG PREFORMED

13
ELASTOMERIC
EARTH SIDE

T
JOINT FILLER
IMPERVIOUS FILL

20

T
T/4
CHAMFER 20 EARTH SIDE
PAINT & OIL DOWEL

150
20 25 20
NFSM PAINT &

T/4
FABRIC FLAP 25 PREFORMED OIL DOWEL w= 4mm TOOLED
/
050 WEEP HOLES SEALANT REBARS
ELASTOMERIC STRIP w/SEALANT
@ 1500 OC 4
JOINT FILLER 25 PREFORMED SEALANT
OFFSET BY 750 ELASTOMERIC
(MAX @ 30 M.) JOINT FILLER (MAX @ 7.5 M.)
FILTER FABRIC
FORM LINER RUBBLE
STONE PATTERN
EXPANSION JOINT DETAILS CONTRACTION JOINT DETAILS
(SEE CIVIL DWG FOR 3 NOT TO SCALE
4 NOT TO SCALE
PATTERN DETAIL) SATISFACTORY
FILL

40 50 NOTES :

CL CL
1. DESIGN PARAMETERS:
COMPOSITE DRAIN CORE PERFORATED
DRAIN CORE IN THE WEEP HOLE AREAS 1.1 ANGLE OF INTERNAL FRICTION OF
PER SPECIFICATION
BACKFILL MATERIAL ------------------- = 32°

Hw
/
050 WEEP HOLES RETAINING WALL SIZES 1.2 COEFFICIENT OF FRICTION ------------ = 0.45
@ 1500 OC
OFFSET BY 750 b5
1.3 SOIL ALLOWABLE BEARING PRESSURE --- = 125 kPa
BASE FOOTING, (M) STEM WALL (mm) KEY (mm)
WALL HEIGHT
1.4 MAXIMUM SLOPE BACKFILL ------------ = 2:1
b4 NATURAL TYPE Hw, (M)
SUBGRADE
A B C T1 W1 W2 D1 T2
b2 2. WHEN WORKING WITHIN OR ADJACENT TO EXISTING
b3 STRUCTURE, CONTRACTOR SHALL EMPLOY APPROPRIATE
1a UP TO 1.50 0.5 0.8 1.3 0.30 300 300 - - EARTH RETENTION SYSTEM (SUCH AS PILING) NOT TO
450

SATISFACTORY IMPAIR LOAD BEARING CAPACITY OF EXISTING FOUNDATION

FILL FILTER FABRIC PRIOR TO COMMENCEMENT OF EXCAVATION FOR THE WALL

0
45
1b 1.51 2.00 0.7 1.0 1.7 0.30 300 300 - - CONSTRUCTION. THIS EARTH RETENTION SYSTEM MAY BE
150

TEMPORARY OR PERMANENT DEPENDING ON SITE CONDITION,

FINISH
AND SUBJECTING TO APPROVAL OF CONTRACTING OFFICER.
150

GRADE 1 2.01 3.00 0.8 1.4 2.2 0.35 300 350 300 300

3. CONTRACTOR SHALL VERIFY SITE CONDITION INCLUDING

VERIFICATION OF THE SPECIFIED DESIGN PARAMETERS FOR
2 3.01 3.50 1.1 1.7 2.8 0.40 300 400 400 300
THE WALL AND NOTIFY THE CONTRACTING OFFICER OF ANY
E2

GRAVEL DRAIN UNUSUAL SITUATION DEVIATING FROM THE WALL DESIGN

MIN
900

MATERIAL 3 3.51 4.00 1.3 2.0 3.3 0.45 300 450 450 300 PARAMETERS FOR NECESSARY MODIFICATION OF THE WALL
ANGLE OF CONSTRUCTION.
E1

REPOSE OF
NATURAL SOIL
MIN
150

4 4.01 4.50 1.6 2.4 4.0 0.50 300 500 650 400 4. EXPOSED SIDE CONCRETE FINISH SHALL HAVE TEXTURED
FORM LINERS WHICH SHALL BE PRE-APPROVED.
50 CL

5 4.51 5.00 1.9 2.6 4.5 0.60 300 600 900 450 5. BACKFILL AGAINST RETAINING WALL SHALL NOT BE
MIN

W2 PERMITTED UNTIL CONCRETE STRENGTH HAS REACHED

NATURAL
T1

b8 b7 DESIGN STRENGTH.
SUBGRADE b1 6 5.01 5.50 2.2 2.8 5.0 0.60 300 600 1000 450

6. CONSTRUCTION OF PAVEMENT OR UTILITIES SHALL NOT

COMMENCE IN FRONT OF THE RETAINING WALL UNTIL
CL
75

7 5.51 6.00 2.5 3.0 5.5 0.60 300 600 1000 450
30 DAYS AFTER THE COMPLETION OF THE RETAINING
WALL AND PLACEMENT OF BACKFILL BEHIND THE WALL.
D1

b6 0150 PERFORATED PIPE

/
75 b3 WRAPPED IN COMPOSITE
CL FILTER FABRIC * HOOKED BARS
b9 ** BENT BARS RETAINING WALL REINFORCING BARS

75
DOWEL SPLICE (mm) REINFORCING BARS AND SPACING (mm)
CL WALL HEIGHT
300 TYPE Hw, (M) * **
E1 E2 b1 b2 b3 b4 b5 b6 b7 b8 b9
T2

A B
1a UP TO 1.50 600 1000 D13@300 D13@300 D16@300 D13@300 D13@300 - D13@300 D13@300 D13@400
(TOE WIDTH) (HEEL WIDTH)
C

1b 1.51 2.00 600 1000 D13@300 D13@300 D16@300 D13@300 D13@300 - D13@300 D13@300 D13@400
RETAINING WALL DETAIL
1 NOT TO SCALE 1 2.01 3.00 600 1000 D13@300 D13@300 D19@250 D16@250 D13@300 D13@200 D16@300 D13@250 D13@400

2 3.01 3.50 600 1200 D13@300 D13@300 D22@200 D19@200 D13@250 D13@200 D16@300 D16@300 D13@400
VARIES
T1

3 3.51 4.00 600 1200 D13@300 D16@300 D22@200 D19@200 D16@300 D13@200 D16@300 D16@300 D13@400

4 4.01 4.50 600 1400 D13@300 D16@300 D25@200 D19@200 D16@300 D13@200 D19@300 D16@250 D13@400
T1

1
5 4.51 5.00 600 1400 D13@300 D16@200 D25@200 D19@200 D16@200 D13@200 D22@300 D19@300 D13@400
10

MIN T1
6 5.01 5.50 600 1400 D13@300 D16@200 D25@200 D19@200 D16@200 D13@200 D22@300 D19@300 D13@400

STEP FOOTING DETAIL

2 NOT TO SCALE
7 5.51 6.00 600 1400 D13@300 D19@200 D25@125 D22@250 D19@200 D13@200 D22@200 D22@300 D13@400