STANDARD SCHEDULE OF RATES

FOR

CIVIL ENGINEERING WORKS

(JUL 2020 EDITION)

 HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES

FOR

CIVIL ENGINEERING WORKS (JUL 2020 EDITION)

CONTENTS

S/No. DESCRIPTION PAGE

GENERAL PREAMBLES 1-3

PARTICULAR PREAMBLES TO VARIOUS TRADES 4 - 15

1. PILING 16 - 18
a) Reinforced Concrete Piles
b) Timber Piles
c) Steel Sheet Piles
d) Bakau Piles

2. EXCAVATION 19 - 24
a) Excavation
b) Extra over excavation
c) Timbering
d) Backfilling
e) Hardcore and Blinding
f) Disposal

3. CONCRETE WORK 24 - 27
a) Concrete
b) Reinforcement
c) Formwork

4. BRICKWORKS 27 - 28
a) Brickwork
b) Rubble Walls

5. CARPENTRY AND JOINERY 28

6. STRUCTURAL STEELWORK AND METALWORK 28 - 31

a) Steelwork
b) Handrailing/Vehicular Impact Guard Rails
c) Gratings
d) Raised Platform
e) Bollards

7 WALL/FLOOR FINISHES 32

8 PAINTWORK 32 - 35
a) Concrete and Plastered Surfaces
b) Timber Surfaces
c) Metal Surfaces
d) Road Markings
 HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES

FOR

CIVIL ENGINEERING WORKS (JUL 2020 EDITION)

CONTENTS

S/No. DESCRIPTION PAGE

9 DRAINAGE WORKS 36 - 54
9.1 Sewers
a) Blinding to Manhole base
b) Type A Section Granular Material
c) Type B Section Concrete (Without Piling Base)
d) Type B Section Concrete (With Piling Base)
e) Type C Section Concrete (Without Piling Base)
f) Type C Section Concrete (With Piling Base)
g) Type D Section Concrete (Without piling Base)
h) Type D Section Concrete (With Piling Base)
i) Vitrified Clay Pipes
j) UPVC Pipes
k) RC Pipes Class 'H'
l) RC Pipes Class 'M'
m) Cast Iron Pipes
n) Pipes in BackDrops/Tumbling Bays
o) Concrete Rings and Surround to Manhole
p) Concrete Cover Slabs & PC Unit for Manhole
q) Manhole Cover and Frame, Ladder, Railings, etc
r) Other Works

9.2 Drains
a) Half Round and Composite Drain Channels and Block Drains
b) Drain Opening Cover slabs, Catch-Basin and Others
c) Sub-soil Pipes and Scupper Drains
d) Weepholes
e) Silt Traps, Water Trough & Vibration Access

10 ROADS AND PAVINGS 54 - 60

10.1 Roads
a) Road Base
b) Bituminous Premix

10.2 Pavings
a) Concrete Paving Slabs
b) BG Slabs
c) Aeration Slabs
d) Interlocking Concrete Paving Blocks
e) Expansion Joints
f) Kerbs, Dividers, etc.
g) Pipe Crossings
 HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES

FOR

CIVIL ENGINEERING WORKS (JUL 2020 EDITION)

CONTENTS

S/No. DESCRIPTION PAGE

11 SIGNAGES 61 - 68
a) Directional Signs
b) Traffic Signs
c) Signboards

12 GATES AND FENCING 69 - 70

a) Gates
b) Chain Link Fencing
c) Temporary Fencing

13 SITE CLEARANCE, TURFING AND TREE-PLANTING 70 - 73

a) Site Clearance
b) Turfing
c) Tree Planting

14 REPAIR WORKS SECTION 74 - 76

a) Break-up and Replacement
b) Pothole Repair
c) Cutting
d) Refixing handrailings
e) Repainting existing metal work & railings
f) Erasing Roadline and Markings
g) Removal and Replacement of Signages

15 DAYWORKS 77 - 80
a) Labour (excluding profit and overheads)
b) Construction Equipment (excluding profit and overheads)

16 LTA ROAD WORKS SECTION 81 - 87

a) Directional Signs
b) Bus Shelter
c) Safety Bollards
d) Road Markings
e) Vehicular Impact Guardrails
f) Gratings
g) Pipe Culverts
h) Recycled Concrete Aggregrate
i) Others

Published by Housing and Development Board, Republic of Singapore.

No part of this document may be reproduced or copied in any form or
by any means without the prior written permission of the publisher.
 GENERAL PREAMBLES Page 1 of 87

Introduction
1 The clauses in the General Preambles shall apply to all work items contained in
the Standard Schedule of Rates.

2 The Particular Preambles to each Trade shall be read in conjunction with the
respective Trade in the Standard Schedule of Rates.

3 All rates contained in the Standard Schedule of Rates are exclusive of any
Goods and Services Tax. Any such Goods and Services Tax shall be borne by
the HDB as and when the same becomes due and payable.

4 All rates include the allowances for complying with the General and Particular
Preambles.

5 All rates contained in the Standard Schedule of Rates are fixed basic rates (in
Singapore Currency) and no amendment whatsoever shall be made to such
rates. The tenderers shall be deemed to have closely studied all rates contained
herein and duly noted their implications.

6 Unless otherwise stated, the term "as specified" means as specified in any of the
documents forming part of the Contract.

7 Where brand/trade names are given in the descriptions, they are solely intended
for fixing the rates of the items. The products and materials to be used in the
Contract shall be governed by the Specifications, Drawings and other documents
forming the Contract (and not this Schedule of Rates).

Principles of Measurement
8 Unless otherwise stated, all work shall be measured nett as fixed in its place.

9 Unless otherwise stated, pipes are described by their internal diameters.

10 Where minimum deductions of voids are dealt with in this document they shall
refer only to openings or voids which are within the boundaries of measured
area. Openings or voids which are at the boundaries of measured area shall
always be the subject of deductions irrespective of size.

11 Where an item is indicated as “Add to last item for each additional………

depth/height/cross sectional area/hour”, the figure as indicated in the item shall
be applied even though the difference for any depth/height/cross sectional
area/hour is less than the figure indicated.

Description of Works and Inclusions

12 All work, materials and goods described in this Standard Schedule of Rates shall
be of the respective kinds described in the Contract and in accordance with the
instructions of the Superintending Officer or the Superintending Officer's
Representative.

13 Headings to groups of items shall be read as part of the descriptions of the items
to which the headings apply.
 GENERAL PREAMBLES Page 2 of 87

14 Unless specifically stated otherwise, the following shall be deemed to be

included in the description of the item of work:

a) Labour and all costs in connection therewith including the labour in

fabricating, assembling, setting, fitting and fixing of materials and goods in
position.

b) Materials and goods including materials required for lapping, jointing and
the like and all costs in connection therewith such as delivery, unloading,
storing, returning of packings, handling, hoisting and lowering.

c) Preparing surfaces to receive work.

d) Protecting materials and work.

e) Waste of materials.

f) All cutting and waste.

g) Use of construction equipment, tools, vehicles and all costs in connection

therewith.

h) Cleaning up on completion and making good all work disturbed.

i) General requirements set out in the Specifications, Drawings and other

documents forming the Contract.

j) Establishment charges, overhead and profit.

Billing of Quantities
15 Where the unit of measurement is the linear metre, square metre and cubic
metre, quantities shall be billed to the nearest whole unit. Fractions of the unit
less than half shall be disregarded and all other fractions shall be regarded as a
whole unit.

16 Where the unit of measurement is the kilogramme, quantities shall be billed to

the nearest whole unit. Fractions of a unit less than half shall be disregarded and
all other fractions shall be regarded as a whole unit. Where the unit of billing is
the tonne or litre, quantities shall be billed to the nearest two places of decimals.

17 Where the unit of measurement is the hour, fractions of the unit shall be billed to
the nearest next half hour.

18 Where the application of clauses 15 and 16 would cause an entire item to be

eliminated, such item shall be billed to the nearest two places of decimals.
 GENERAL PREAMBLES Page 3 of 87

Application of Rates
19 Where rates with descriptions pertain to the same purpose are listed in more
than one Standard Schedule of Rates incorporated in the Contract; the rate as
listed in the following schedules (in the stated order of precedence) shall prevail:

1st Precedence - Standard Schedule of Rates for Building Works

2nd Precedence - Standard Schedule of Rates for Civil Engineering

Works

3rd Precedence - Standard Schedule of Rates for Electrical Works

Units of Measurement
20 The following abbreviations are used for the units:

m - Linear metre
m2 - Square metre
m3 - Cubic metre
no - Number
p/tree - Per Tree
job - Per Job
kg - Kilogram
ton - Tonne
pr - Pair
sht - Sheet
ltr - Litre
hr - Hour
 Page 4 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

1.0 PILING WORK

Generally
1.1 Piling work shall be executed in accordance with the relevant Specifications and
the instructions of Superintending Officer's Representative.

Rates
1.2 The rate of each type of piling work shall be deemed to include removal of
underground obstructions together with all work in connection therewith unless
specifically otherwise provided.

1.3 The rate of each type of piling work shall be deemed to include extending piles,
dollying and connections unless specifically otherwise provided.

1.4 Redriving or intermittent driving necessitated by upheaving or lengthening of

piles or by the removal of obstructions under piles or other causes including
moving and repositioning the piling frame shall be deemed to be included with
the items of piling.

1.5 The rate of each item of piling shall be deemed to include:

a) Handling, pitching, heading, pointing and bracing and providing protective

wrought iron ring or helmet to pile.

b) Cutting off surplus and heads of piles and preparing and integrating
reinforcement into pile caps where applicable, extra excavation,
backfilling and disposal of debris.

c) Disposing of materials displaced arising out of driving the piles.

1.6 The rate of each item of treated timber piles includes the application of wood
preservative to cut off surfaces of piles.

1.7 The rate of each item of reinforced concrete piles includes moulds,
reinforcement, preparing heads and extra labour and materials to receive pile
extensions.

1.8 The rate of each item of pile tests includes provision of all anchors, platforms,
loading and unloading of materials, instruments and monitoring of the tests.

1.9 The rate for providing and assembling the equipment on the site and the
subsequent dismantling and removal shall be given separately as an item.

1.10 Movement of piling frames into position and about the site, any necessary
excavation or filling required to place the frames, raising or lowering the frames
and any staging, barges or the like required to support the frames, shall be
deemed to be included with the item of piling.
 Page 5 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

Measurement
1.11 Payment for treated timber piles driven shall be the product of the relevant rate
per metre run and the penetration depth (measured from tip to cut-off level).

1.12 The pay length of each reinforced concrete pile after it is driven into the ground
is measured from the cut-off level of the pile to the end of pile shoe.
Notwithstanding the provisions of Billing of Quantities contained in the General
Preambles, the pay length of reinforced concrete piles shall be billed to the
accuracy of nearest of 10mm.

2.0 EXCAVATION

Generally
2.1 Excavation of ordinary ground includes spoil or rubbish of every description,
rubbish tip material etc, sand gravel, decomposed granite, red or white earth,
loamy or gravelly clay, gravelly laterite, mud, bog or any other formation by pick
and shovel or machinery and at any depth.

Rates
2.2 The rate of each item of excavation shall be deemed to include excavating
around foundation, piles and confined areas, getting out, removing of bakau
piles, trimming, levelling and compacting bottoms of excavations and keeping
sides plumb and planking and strutting (where stated).

2.3 Rates for each item shall be held to include for keeping all excavation free from
water and site dry, pumping or bailing and cable/services detection if required
and providing any temporary drains required.

Measurement
2.4 The measurement of all excavations and subsequent disposal shall be those
before excavating. The increase in bulk and any extra excavation required for
earthwork support, planking and strutting and formwork for concrete shall be
deemed to be included in the rates.

2.5 No allowance for working space shall be made in the measurement of all
excavation unless the method of construction requires workmen to operate from
the outside of the structure. In such cases, a working space of 600mm shall be
measured from the external face of the structure.

2.6 Filling shall be measured as equal to the void to be filled. Any thickness stated
shall be deemed to be after compacting.
 Page 6 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

2.0 EXCAVATION (CONT’D)

Timbering

Rates
2.7 The rate for each item of the timbering for the sewer trenches/manholes shall be
deemed to include the design of the timbering by a Professional Engineer when
the depth of the excavation/trenches exceeds 4.00 metres.

3.0 CONCRETE WORK

Generally
3.1 Unless otherwise stated, rates for concrete, reinforcement and formwork shall be
applicable to all work irrespective of locality, positions, shapes and height.

Rates
3.2 The rate for each item of concrete shall be held to include the following:

a) Forming, cutting grooves, chases, mortices, holes and making good any
other sundry items of a like nature.

b) Extra labour for laying to falls, or cambers and preparing surfaces to

receive screeds or pavings also to be included.

c) All tests on concrete, cement and aggregate etc, as required and

compliance with the strengths as specified.

d) Tamping and/or vibrating to give thorough compaction; working between

and around reinforcements.

e) Laying on any type of sub-base; preparing and leaving surfaces to receive

screeds or paving.

Measurement
3.3 No deduction shall be made in the measurement of concrete work for:

a) Voids of 0.05 cubic metre or less.

b) Volume of the reinforcement and steelwork.

c) Openings in walls, floor, roof slabs and the like of 0.10 square metre or
less.
 Page 7 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

3.0 CONCRETE WORK (CONT'D)

3.4 Reinforcement

Rates
3.4.1 The rate of each item of reinforcement shall be deemed to include:

a) Allowances in the weight of reinforcement for rolling margins.

b) All cleaning and wire-brushing bars to remove rust, dust, mill scale,
dirt, oil and other deleterious matters.

c) All bending, cutting and notching around obstructions.

d) All hooks and tying wires at all joints and crossings.

e) All non-designed spacers or chairs, distance blocks, temporary

fixings and supports.

Measurement
3.4.2 The conversion factor for the various steel reinforcement bars shall be as
follows:

6mm diameter - 0.222 kg/m

7mm diameter - 0.302 kg/m
8mm diameter - 0.394 kg/m
9mm diameter - 0.499 kg/m
10mm diameter - 0.616 kg/m
13mm diameter - 1.042 kg/m
16mm diameter - 1.579 kg/m
20mm diameter - 2.466 kg/m
22mm diameter - 2.984 kg/m
25mm diameter - 3.854 kg/m
28mm diameter - 4.834 kg/m
32mm diameter - 6.313 kg/m

3.5 Fabric Reinforcement

Rates
3.5.1 The rate for each item of fabric reinforcement shall be held to include for
extra material at laps, tying wires and all bending, cutting and notching
around obstruction.

Measurement
3.5.2 Only the nett area covered shall be measured and no deduction shall be
made for opening less than 1.00 square metre.
 Page 8 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

3.0 CONCRETE WORK (CONT'D)

3.6 Formwork

Rates
3.6.1 The rate of each item of formwork shall be deemed to include:

a) All necessary boardings, supports, erecting, framing, cutting,

perforations for pipes, angles, cleaning, wetting and treatment with
mould oil, mould liquid or limewhite and the like.

b) All splayed edges, notchings, allowance for overlaps and passings

at angles, battens, strutting, bolting, wedging, easing, striking and removal.

Measurement
3.6.2 Formwork shall be measured to the surface of work sloping more than 15
degree from the horizontal.

3.6.3 No deduction shall be made in measurement of formwork for:

a) Openings less than 1 square metre.

b) Intersection of main and secondary beams.

c) Intersection of beams and stanchion casing or columns.

3.7 Precast Work

Rates
3.7.1 The rate of each item of precast work shall be deemed to include concrete,
reinforcement, formwork including the formation and filling of pockets, holes,
chases and recesses for anchors, bolts and the like, grouting, pointing of
joints, surface finishes, delivery, unloading, hoisting, erecting, fixing
including all necessary temporary erection gear, bracing and working
platforms.

4.0 BRICKWORK

Rates
4.1 The rate for each item of block, brickwork shall be held to include for all
special made blocks, bricks and in-situ concrete in lieu, all holdfasts and
bonding ties at abutments to concrete structures, all rough and fair cuttings,
oversailing and receding courses, rough relieving and discharging arches,
wedging and pining, raking out joints for and pointing flashings, bedding
plates, parging and coring flues, labour eaves filling, plumbing angles,
forming square and rebated reveals, cut squints or birdsmouths, notches,
forming, leaving or cutting chases, holes and mortices, cutting and pining
and making good and any other sundry items of a like nature.
 Page 9 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

4.0 BRICKWORK (CONT’D)

Rates (Cont’d)
4.2 Rates for blockwork and brickwork shall be applicable to all work irrespective
of positions, patterns, shapes and height.

Measurement
4.3 Deductions shall be measured the nett sizes of the openings and recesses,
including the extra width or rebated reveals. No deductions shall be made
for openings of 0.50 square metre or less.

4.4 Deductions shall be made for strings, sills, lintols and the like only when
exceeding 100mm in height.

5.0 CARPENTRY AND JOINERY

Description
5.1 The description of each item of carpentry work shall be deemed to include
all cutting, notching, boring, sinking, pelleting, fitting, trimming, mitring,
halving, morticing, tenoning, dovetailing, scarfing, wedging and all ends,
splayed edges, short lengths and temporary supports and any other sundry
of a like nature and also all labour in forming, drilling for bolts and fixing in
position complete with nails, screws or adhesives.

5.2 The description of each item of joinery work shall be deemed to include all
nailing, gluing, screwing, plugging, cutting, notching, holes, housing ends,
mitring ends and shaped ends, angles, junctions, heading joints, short
lengths, tongued angles, splayed or rounded edges, chamfers, rebates,
grooves and any other sundry items of a like nature including stops and
working cross-grain, fitting and hanging and the like.

6.0 STRUCTURAL STEELWORK AND METALWORK

Description
6.1 The description of each item of work shall be deemed to include:-

a) Allowances for rolling margins and the weight of welding materials.

b) Shop and site fabrication including drilling, cutting (including holes

and openings for other trades), notching, splicing, mitring, welding,
riveting, bolting, machining ends and bearings, delivery, unloading,
handling, assembling, hoisting, erecting, fitting and fixing in
position, bedding, filling in solid, polishing and pointing including
necessary lugs or other attachment.
 Page 10 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

6.0 STRUCTURAL STEELWORK AND METALWORK (CONT’D)

c) Provision of all necessary construction equipment, temporary

bracing supports and the like required for erection, providing
samples and tests required by the specification, the inspection of
welds including the use of any special radio-graphic techniques.

d) Protection such as wrapping finished work with paper, coating with

grease or carrying out such other protective measures as may be
required and removing and cleaning on completion.

e) Nuts and any type of washer which may be required.

f) Preparation of shop Drawings.

Deduction
6.2 No deduction shall be made for drillings, holes, notchings, splay cuts and
the like.

Measurement
6.3 Weights stated shall be net theoretical weights.

6.4 Steel sections and plates in connections or fitted stiffeners, column cap
and base plates, rigid frame bases and butt plates, purlins, girts, eaves,
fascias and similar cleats or brackets attached to trusses, lattice girders
and open web joists and plates, and similar items shall be weighted at net
dimensions.

6.5 Irregular, including circular shaped plates shall be weighted at the

smallest size rectangles from which they can be cut; regular and
triangular shaped plates shall be weighted at net dimensions.

6.6 Half or other parts of steel sections in connections shall be weighted at

half the weight of the section from which they have been cut when equal
to or less than half the section and at the full weight of the section from
which they have been cut when greater than half the section.
 Page 11 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

7.0 WALL/FLOOR FINISHES

Rates
7.1 The rate for each item shall be deemed to include all temporary rules,
temporary grounds, temporary screeds and the like, cramps, dowels, ties,
special metal supporting brackets and the like, cutting holes, notching and
the like, masking, labour to internal angles other than coved angles, making
good around pipes and the like, work in narrow widths and small quantities,
joints between different types of work, joints between new and old work,
internal angles, fair edges, rounded or chamfered edges or angles, quirks,
grooves, V-joints, groin points and other intersections of curved surfaces,
rounded coves and external angles not exceeding 25mm radius, necessary
UPVC trimming pieces, mitres, stops and the like, and all making good and
any other sundry items of a like nature.

7.2 Rate for each item shall also be deemed to include protecting surfaces from
the weather or building operations.

Measurement
7.3 No deduction shall be made for openings of 0.50 square metre or less.

7.4 In the measurement of plastering, no deduction shall be made for casings

for pipes under 300mm wide or angles which are finished in a different
material if these do not exceed 100mm girth.

7.5 Work shall be deemed to be executed when scaffolding has been provided
during the course of construction. Should scaffolding be required separately
just to execute the work, it would be paid as an extra item.

7.6 Where an item is described as “Add to (or deduct from)……for each 5mm
thickness over (or under)…….”, the difference for any thickness less than
5mm shall be paid/deducted based on 5mm thick.

8.0 PAINTWORK

Rates
8.1 The rate for each item of painting shall be held to include for all necessary
preparation of surfaces including cleaning off, knotting, stopping and
sandpapering woodwork, wirebrushing metal and leaving all surfaces free
from dust, rust, grease and oil before painting, narrow widths, etc.

Measurement
8.2 No deduction shall be made for openings of 0.50 m2 or less.

8.3 Work shall be deemed to be executed when scaffolding has been provided
during the course of construction. Should scaffolding be required separately
just to execute the work, it would be paid as an extra item.
 Page 12 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

9.0 DRAINAGE WORK

Measurement
9.1 Unless otherwise described, excavation, backfill and disposal of excavated
material shall be measured separately.

9.2 Piling, hardcore, lean concrete, sand bed and concrete haunching to drains,
sewers and culverts shall be measured separately.

9.3 The measurement of lengths of pipes shall be along their centre lines and
lengths of pipes in backdrops, tumbling bays, etc., shall be measured
separately.

9.4 The measurement of pipes in trenches shall include lengths occupied by

fittings and valves.

9.5 Unless otherwise stated, pipes are described by their internal diameters.

Rates
9.6 The rate of each item of concrete haunching shall be deemed to include
moulds, formwork, reinforcement, forming holes, rebates, notchings,
mortices and recesses.

9.7 The rate of each item of pipes shall be deemed to include the following:

a) Laying of pipes in trenches or open ground to required falls.

b) Labour and material for cutting and jointing pipework.

c) Accessories such as joints, sockets, connectors, elbows, etc.

10.0 ROADS AND PAVINGS

Measurement
10.1 The thickness of materials used for road pavement shall be measured nett,
i.e. consolidated thickness after compaction.

10.2 No deductions shall be made in measurement of areas for manhole covers

less than 1 square metre.

Rates
10.3 Unless otherwise stated, excavation, backfilling and the subsequent removal
of surplus excavated material shall be measured separately.

10.4 The rate of each item of base course shall be deemed to include the
supplying, depositing, spreading, levelling, compacting, ramming and
consolidating to the finished thickness.
 Page 13 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

10.0 ROADS AND PAVINGS (CONT’D)

Rates (Cont’d)
10.5 The rate of each item of premix bituminous surfacing shall be deemed to
include the following:-

a) Sweeping and brushing surface prior to applying tack coats or

asphalt surfacing.

b) Supplying and applying suitable tack coats wherever required.

c) Supplying and unloading of asphalt mixes as directed.

d) Supplying and laying by means of mechanical spreader/finisher,

rolling and finishing of asphalt mixes.

e) Providing the necessary construction equipment, equipment, tools,

etc. and the subsequent removal upon completion.

10.6 The rate of each item of precast concrete kerbs, channels and drains shall
be deemed to include all necessary moulds, formwork, reinforcement and
joints and cutting, all angles, intersections, ends, outlets, etc.

10.7 The rate for each item of precast concrete kerbs shall include for laying in
alignment and finishing fair on all exposed surfaces.

11.0 SIGNAGES

Measurement
11.1 The rate of each item of work for directional/traffic signs shall be deemed to
include foundations, supporting posts, excavation, preparation of surfaces,
disposal of excavated material, upholding sides of excavation, backfilling,
concrete, formwork, reinforcement and joints, etc.
 Page 14 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

12.0 GATES AND FENCING

Measurement
12.1 The measurement for lengths of fences shall exclude lengths occupied by
gates.

Rates
12.2 The rate for each item for fences shall be deemed to include the following:

a) Excavation, preparation of surfaces, disposal of excavated

materials, upholding sides of excavation, backfilling, concrete,
formwork and reinforcement.

b) Posts, End Posts, Angle Posts, Intermediate Posts, Straining

Posts and Gate Posts.

c) Drilling and cranking top of posts.

d) Trowelling top of concrete bases to a weathered finish.

13.0 SITE CLEARANCE, TURFING AND TREE-PLANTING

Definition of Approved Soil Mixture

13.1 Approved soil mixture shall be three parts topsoil with one part of soil
conditioner and 1 kg per m3 of granular fertilizer NPK (15:15:6.4) or 4:2:1
subsoil, unwashed sand and soil conditioner with 1 kg per m3 of granular
fertilizer NPK (15:15:6.4).

Measurement
13.2 The measurement of girths of the trees shall be at a height of 1.0 metre
above ground.

Rates
13.3 The rate for cutting down trees shall be deemed to include for grubbing up
roots and filling of voids after removal of tree roots.

13.4 The rate of each item of turfing and planting shall be deemed to include for
watering, weeding, fertilizing, cutting, settlement, re-seeding and
maintenance during the “Maintenance Period” as specified.
 Page 15 of 88

PARTICULAR PREAMBLES TO VARIOUS TRADES

14.0 REPAIR WORKS SECTION

(a) Unless otherwise stated, the relevant particular preambles as

hereinbefore described shall be applicable for the corresponding
work items under this Section.

(b) Notwithstanding (a) above, for excavation works carried out under
Works Instructions, the rate for each item of excavation shall not
include cable/services detection. The cable/services detection
shall be paid separately under Repair Works by Works Instruction.

15.0 DAYWORKS

Rates
15.1 Rates shall be applicable in respect of all work executed on a daywork
basis. During the continuance of such work, the Contractor shall keep proper
records of the names, occupations and working hours of all workmen
employed for such work and the quantities and descriptions of all materials
and construction equipment employed. Such records, receipts or vouchers
must be verified by the Superintending Officer or the Superintending
Officer's Representative before payment can be effected.
 Page 16 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

1. PILING

(a) Reinforced Concrete Piles

1.01 Providing and assembling of necessary piling equipment item $4,585.60 Q042
to drive any size of reinforced concrete piles including all
necessary tools and appliances, subsequent dismantling
and removal on completion of the work on site.

Grade 40 precast reinforced concrete piles inclusive

of tools (providing, assembling and subsequent
dismantling and removal of piling equipment
measured separately), materials and labour for the
execution thereof in any ground. Splices are to be
approved by the SO's Representative and painted
with one coat of bitumen paint after welding. (The
pay length is measured from the given cut off level of
the piles to the pointed end of the cast iron shoe or
concrete shoe):

1.02 150mm x 150mm (nominal working load of 20 tonne). m $23.90 SB305

1.03 175mm x 175mm (nominal working load of 30 tonne). m $30.50 SB089

1.04 200mm x 200mm (nominal working load of 40 m $35.60 SB090

tonne).

1.05 230mm x 230mm (nominal working load of 50 tonne). m $42.70 SB091

1.06 260mm x 260mm (nominal working load of 65 tonne). m $47.30 SB092

1.07 300mm x 300mm (nominal working load of 90 tonne). m $61.80 SB313

(b) Timber Piles

1.08 Providing and assembling of necessary piling equipment item $1,499.00 Q043
to drive any size of treated timber piles including all
necessary tools and appliances, subsequent dismantling
and removal on completion of the work on site.
 Page 17 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Tanalised timber vertical piles inclusive of tools

(providing, assembling and subsequent dismantling
and removal of piling equipment measured
separately), materials and labour for the execution
thereof in any ground. The pay length to be measured
from the given cut-off level of the pile to the pointed
end of the pile (price include mild steel box joint) for
the following sizes:

1.09 100mm x 100mm. m $10.70 Q004

1.10 125mm x 125mm (SWL 14T). m $16.30 Q005

1.11 150mm x 150mm (SWL 20T). m $22.70 Q006

1.12 175mm x 175mm (SWL 27T). m $33.90 Q007

(c) Steel Sheet Piles

1.13 Providing and assembling of necessary piling equipment item $8,159.30 SA032
to drive/extract Grade 43 (BS 4360) steel sheet piles of
any size including all necessary tools and appliances,
subsequent dismantling and removal on completion of
the work on site.

1.14 Supply and delivery of Grade 43 (BS 4360) steel sheet ton $171.30 SA028
piles for use as temporary shoring to retain the sides of
excavation in approved section and lengths.

1.15 Driving Grade 43 (BS 4360) steel sheet piles including ton $379.50 SA029
the provision of all labour, Construction equipment
(providing, assembling and subsequent dismantling of
piling equipment measured separately), tools and
everything necessary for the installation as specified.

1.16 Extracting, recovering and stacking Grade 43 (BS 4360) ton $253.00 SA030
steel sheet piles including the provision of all labour,
tools (providing, assembling and subsequent dismantling
of piling equipment measured separately), and
everything necessary for the execution as specified.

1.17 Grade 43 (BS 4360) steel sheet piles left in permanently ton $1,847.50 SA031
including the provision of all labours, tools (providing,
assembling and subsequent dismantling of piling
equipment measured separately), and everything
necessary for the installation as specified.
 Page 18 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(d) Bakau Piles

1.18 Providing and assembling of necessary piling equipment item $980.40 Q045
to drive any size of bakau piles including all necessary
tools and appliances, subsequent dismantling and
removal on completion of the work on site.

Bakau piles minimum 80mm diameter at the larger

end including cutting of piles (providing, assembling
and subsequent dismantling of piling equipment
measured separately):

1.19 Not exceeding 2.00m long. no $6.60 Q031

1.20 Exceeding 2.00m but not exceeding 4.00m long. no $11.10 Q032

1.21 Exceeding 4.00m but not exceeding 6.00m long no $20.90 Q033
complete with mild steel pipe sleeves.

1.22 Exceeding 6.00m but not exceeding 8.00m long ditto. no $26.80 Q034

Bakau piles minimum 80mm diameter at the larger

end, by jacking method using excavator including
cutting of piles (rate inclusive of excavator):

1.23 Not exceeding 2.00m long. no $6.90 CE01001

1.24 Exceeding 2.00m but not exceeding 4.00m long. no $11.40 CE01002

1.25 Exceeding 4.00m but not exceeding 6.00m long no $21.20 CE01003
complete with mild steel pipe sleeves.

1.26 Exceeding 6.00m but not exceeding 8.00m long ditto. no $27.10 CE01004

1.27 Bakau piles minimum 80mm diameter at the larger end m $2.00 Q030
as roller supports.

(e) UPVC Pipes for Bored Piles

1.28 Approximately 16mm nominal internal diameter hollow m $2.30 CE01005

UPVC pipe with a prelaid 3mm diameter wire inside the
UPVC pipe within each cast in-situ pile.
 Page 19 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

2. EXCAVATION

(a) Excavation

Excavation to formation level for roads, carparks,

pavements, etc in ordinary ground including forming
of surfaces and removing of surplus excavated
materials within site, for the following average overall
depth:

2.01 Not exceeding 150mm deep. m² $2.70 SA001

2.02 Exceeding 150mm but not exceeding 300mm deep. m² $4.70 SA002

2.03 Exceeding 300mm deep. m³ $14.10 SA003

2.04 Excavation only for the preparation of platform in m³ $1.80 CE02003

ordinary ground.

2.05 Excavation for the preparation of platform in ordinary m³ $9.50 A094

ground including filling and compaction to required
platform levels within site.

2.06 Excavation in embankment commencing from reduce m³ $16.20 SA007

level in ordinary ground including forming of surfaces and
removing of surplus excavated materials within site.

2.07 Excavate to form trial holes in ordinary ground not m³ $47.10 A096
exceeding 2.00m deep and get out and return, fill in and
ram.

2.08 Excavate to form trenches for drains, etc. in ordinary m³ $22.80 A095
ground not exceeding 1.00m deep including forming
bottom and get out, deposit on site, backfilling working
space of trench with granular material/selected
excavated material and cart away surplus excavated
material from site.
 Page 20 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Excavate to form trenches for drains, etc. in ordinary

ground including forming bottom and get out,
deposit on site, planking and strutting, and
backfilling working space of trench with granular
material/selected excavated material and cart away
surplus excavated material from site in stages of the
following depths:

2.09 Not exceeding 2.00m deep. m³ $30.60 A097

2.10 Exceeding 2.00m but not exceeding 4.00m deep. m³ $36.40 A098

2.11 Exceeding 4.00m but not exceeding 6.00m deep. m³ $40.40 A099

Excavate to form trenches for columns, pile caps,

foundations, beams, basements, pier holes, etc. in
ordinary ground including forming of bottom,
planking and strutting, part return, fill in and ram, and
remainder get out and deposit on site as directed in
stages of the following depth:

2.12 Not exceeding 2.00m deep. m³ $31.20 SA008A

2.13 Exceeding 2.00m but not exceeding 4.00m deep. m³ $34.30 SA009A

2.14 Exceeding 4.00m but not exceeding 6.00m deep. m³ $39.50 SA010A

Excavate to form trenches for sewer lines, manholes,

etc. in ordinary ground including forming bottom and
get out, backfilling trench with granular material and
cart away excavated material from site in stages of
the following depths (timbering measured
separately):

2.15 Not exceeding 2.00m deep. m³ $36.30 A100

2.16 Exceeding 2.00m deep but not exceeding 4.00m m³ $46.90 A101
deep.

2.17 Exceeding 4.00m deep but not exceeding 6.00m m³ $48.80 A102
deep.

2.18 Exceeding 6.00m deep but not exceeding 8.00m m³ $52.50 A103
deep.

2.19 Exceeding 8.00m deep. m³ $60.00 A104

 Page 21 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Excavate to form trenches for service pipes, cable

crossings, etc. in ordinary ground including forming
bottom and get out in stages of the following depths:

2.20 Not exceeding 2.00m deep and deposit on site. m³ $13.80 A105

2.21 Not exceeding 2.00m deep and cart away excavated m³ $21.00 A106
material from site.

2.22 Exceeding 2.00m deep but not exceeding 4.00m m³ $15.30 CE02001
deep and deposit on site.

2.23 Exceeding 2.00m deep but not exceeding 4.00m m³ $22.50 CE02002
deep and cart away excavated material from site.

(b) Extra over excavation

Extra over excavation for excavating/breaking up

surfaces to any depth using pneumatic tools etc:

2.24 Rock/reinforced concrete surfaces. m³ $91.80 A006

2.25 Metalled road surfaces. m³ $44.80 A007

2.26 Mass concrete surfaces. m³ $85.70 A008

(c) Timbering

Open timbering for sewer trenches and manholes

measured as supporting faces of excavations using
type (I) timbering in stages of the following depths as
shown in drawings (measured nett from drawings):

2.27 Not exceeding 2.00m deep. m² $12.70 A070

2.28 Exceeding 2.00m but not exceeding 4.00m deep. m² $13.10 A071

2.29 Exceeding 4.00m but not exceeding 6.00m deep. m² $14.60 A072

Open timbering for sewer trenches and manholes

measured as supporting faces of excavations using
type (II) timbering in stages of the following depths
as shown in drawings (measured nett from
drawings):

2.30 Not exceeding 2.00m deep. m² $14.80 A073

 Page 22 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Open timbering for sewer trenches and manholes

measured as supporting faces of excavations using
type (II) timbering in stages of the following depths
as shown in drawings (measured nett from drawings)
(Cont'd):

2.31 Exceeding 2.00m but not exceeding 4.00m deep. m² $14.60 A074

2.32 Exceeding 4.00m but not exceeding 6.00m deep. m² $16.30 A075

Open timbering for sewer trenches and manholes

measured as supporting faces of excavations using
type (III) timbering in stages of the following depths
as shown in drawings (measured nett from
drawings):

2.33 Not exceeding 2.00m deep. m² $17.60 A076

2.34 Exceeding 2.00m but not exceeding 4.00m deep. m² $17.00 A077

2.35 Exceeding 4.00m but not exceeding 6.00m deep. m² $19.00 A078

Close boarded timbering for sewer trenches and

manholes measured as supporting faces of
excavations using type (IV) timbering in stages of the
following depths as shown in drawings (measured
nett from drawings):

2.36 Not exceeding 2.00m deep. m² $25.20 A079

2.37 Exceeding 2.00m but not exceeding 4.00m deep. m² $19.60 A080

2.38 Exceeding 4.00m but not exceeding 6.00m deep. m² $21.80 A081

2.39 Exceeding 6.00m but not exceeding 8.00m deep. m² $24.10 A082

2.40 Exceeding 8.00m but not exceeding 10.00m deep. m² $26.40 A083

Close boarded timbering for sewer trenches and

manholes measured as supporting faces of
excavations using type (V) timbering in stages of the
following depths as shown in drawings (measured
nett from drawings):

2.41 Not exceeding 2.00m deep. m² $44.70 A084

2.42 Exceeding 2.00m but not exceeding 4.00m deep. m² $26.20 A085
 Page 23 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Close boarded timbering for sewer trenches and

manholes measured as supporting faces of
excavations using type (V) timbering in stages of the
following depths as shown in drawings (measured
nett from drawings) Cont'd):

2.43 Exceeding 4.00m but not exceeding 6.00m deep. m² $29.30 A086

2.44 Exceeding 6.00m but not exceeding 8.00m deep. m² $32.30 A087

2.45 Exceeding 8.00m but not exceeding 10.00m deep. m² $35.40 A088

Close boarded timbering for sewer trenches and

manholes measured as supporting faces of
excavations using type (VI) timbering in stages of the
following depths as shown in drawings (measured
nett from drawings):

2.46 Not exceeding 2.00m deep. m² $59.50 A089

2.47 Exceeding 2.00m but not exceeding 4.00m deep. m² $37.00 A090

2.48 Exceeding 4.00m but not exceeding 6.00m deep. m² $41.30 A091

2.49 Exceeding 6.00m but not exceeding 8.00m deep. m² $45.70 A092

2.50 Exceeding 8.00m but not exceeding 10.00m deep. m² $50.00 A093

2.51 Extra over timbering for timber left in excavation as m³ $248.10 A020
directed including cutting runner below ground level all
as required by the S.O.'s Rep. (Price to include for
wedges, cleats, etc, measurements shall be taken from
ground level to bottom of excavation. *Open/close
timbering to be measured separately. This rate includes
the omission of the extraction of timber left in).

(d) Backfilling

Backfill excavated trench for service pipes, cable

crossings, etc including consolidation with:

2.52 Granular material. m³ $39.60 A107

2.53 Selected excavated material. m³ $11.80 A110

2.54 Imported earth. m³ $18.00 A109

 Page 24 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(e) Hardcore and Blinding

Filling including consolidation as directed:

2.55 Hardcore. m³ $33.10 I005

2.56 Granite dust. m³ $55.70 A108

2.57 Granite chippings. m³ $63.70 I008

2.58 Unwashed sand bed. m³ $76.00 SA020

(f) Disposal

2.59 Cart away surplus excavated material from site of the m³ $14.40 SA016
work including transport and all charges.

3. CONCRETE WORK

(a) Concrete

3.01 Grade 15 concrete to underside of foundations, bases, m³ $148.60 I016

slabs, etc.

Concrete benching to base of drain finished to falls

towards precast inverts including trowelling all as
specified:

3.02 Grade 20. m³ $180.50 CE03029

3.03 Grade 25. m³ $182.90 CE03030

3.04 Grade 30. m³ $185.30 CE03011

Concrete in foundations, bases, walls, backdrops,

tumbling bays, etc:

3.05 Grade 20. m³ $151.00 I017

3.06 Grade 25. m³ $153.40 I018

3.07 Grade 30. m³ $155.80 I019

3.08 Grade 35. m³ $158.20 I045

3.09 Grade 40. m³ $161.80 I044

 Page 25 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(b) Reinforcement

Mild steel rod reinforcement including all bending,

cutting and waste and fixing:

3.10 6mm diameter. kg $2.90 SB022

3.11 8mm diameter. kg $2.90 SB154

3.12 10mm diameter. kg $2.50 SB023A

3.13 13mm diameter. kg $2.50 SB024A

3.14 16mm diameter. kg $2.40 SB025A

3.15 20mm diameter. kg $2.10 SB026A

3.16 25mm diameter. kg $2.10 SB028A

Deformed high tensile steel rod reinforcement

including all bending cutting and waste and fixing:

3.17 10mm diameter. kg $2.30 CE03016

3.18 13mm diameter. kg $2.30 CE03017

3.19 16mm diameter. kg $2.30 CE03018

3.20 20mm diameter. kg $2.00 CE03019

3.21 22mm diameter. kg $2.00 CE03020

3.22 25mm diameter. kg $2.00 CE03021

3.23 28mm diameter. kg $2.00 CE03022

3.24 32mm diameter. kg $2.00 CE03023

3.25 Extra over steel rod reinforcement for galvanising. kg $0.80 SB039A
 Page 26 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Welded steel fabric reinforcement (Class A) well

lapped and tied at joints (measured nett):

3.26 WA8. m² $7.10 SB043

3.27 WA9. m² $8.70 CE03001

3.28 WA10. m² $12.30 SB145A

3.29 WB8. m² $10.40 SB149A

3.30 WB9. m² $12.40 SB229

3.31 WB10. m² $13.70 SB150

3.32 WB11. m² $16.90 CE03010

3.33 WB12. m² $18.50 SB151

3.34 WB13. m² $22.30 CE03002

3.35 WD8. m² $13.40 SB124

3.36 WD9. m² $17.00 SB230A

3.37 WD10. m² $20.30 SB231

3.38 WD11. m² $25.90 CE03007

3.39 WD12. m² $30.00 CE03008

3.40 WD13. m² $34.10 CE03009

3.41 Galvanised finemesh (grid size 25mm x 25mm x m² $7.90 CE03028

1.5mm thick).
 Page 27 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Double wire welded steel fabric reinforcement well

lapped and tied at joints (measured nett):

3.42 W10101020 m² $27.60 CE03024

3.43 W13101020 m² $41.00 CE03025

3.44 W10151020 m² $22.20 CE03026

3.45 W13151020 m² $31.50 CE03027

(c) Formwork

3.46 Shuttering to sides and soffits of concrete. m² $35.00 G005

4. BRICKWORKS

(a) Brickwork

Brickwork in standard common bricks (size 215mm x

102.5mm x 65mm) laid in cement and sand mortar
(1:3) with 10mm joints raked 10mm deep or flush
pointed as work proceeds:

4.01 Mass brickwork generally. m³ $285.40 L005

4.02 One and half thick wall. m² $156.90 G011

4.03 One brick thick wall to chambers, access shaft, etc. m² $104.60 G010

4.04 One brick thick wall. m² $79.00 L006

4.05 Half brick thick wall reinforced with expanded metal m² $42.10 L007
brickwork reinforcement.

Common brickwall using M211 modular bricks size

190x90x90mm laid in masonry cement and sand (1:3)
mortar as specified with 10mm joints raked 10mm
deep or flush pointed as the work proceeds:

4.06 190mm thick. m² $74.80 SC015A

4.07 290mm thick. m² $100.10 SC044A

4.08 190mm wide Brick-on-edge red bull-nosed brick kerb m $26.90 SD054A
using 190x90x90mm thick red facing modular bricks
jointed and pointed in cement and sand mortar (1:3) as
specified (screed measured separately).
 Page 28 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(b) Rubble Walls

4.09 Sledge granite set in cement and sand mortar (1:3) in m³ $130.60 L001
abutments, retaining walls, to drains, rivers etc.

4.10 Ditto but in walling, fair-faced and pointed in plain or m³ $149.10 L002
coloured cement.

5. CARPENTRY AND JOINERY

Supply only approved well seasoned timber in

constructional members, scantlings, railings,
deckings, etc cut to the forms and sizes required:

5.01 Kapoh or Balau (wrot timber). m³ $932.30 N015

5.02 Keruing (sawn timber). m³ $619.90 N016

5.03 Kempas (sawn timber). m³ $789.40 N017

5.04 Extra over timber for tanalising. m³ $202.40 N018

5.05 Extra over timber only for fixing. m³ $600.30 N019

6. STRUCTURAL STEELWORK AND METALWORK

(a) Steelwork

Mild steel flats, angles, tees, channels, hollow

sections, square sections, rivets and bolts, etc. of
any size fabricated and fixed including welding or
bolting, and painting with one coat of primer:

6.01 Grade 43A for structural steelwork only. kg $8.50 SH018A

6.02 For non-structural steelwork only. kg $6.90 SH019A

(b) Railings/Vehicular Impact Guard Rails

6.03 Aluminium alloy railing Type 'A' of 1000mm height with m $284.60 CE07007
25mm diameter jail bars at 120mm centres and
75x75mm barrier post at 1500mm centres embedded in
and including concrete footing as shown in drawings.
 Page 29 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

6.04 Aluminium alloy railing Type 'B' of 1000mm height with m $215.10 CE07008
20mm diameter jail bars at 120mm centres and
54x54mm barrier post at 1500mm centres embedded in
and including concrete footing as shown in drawings.

6.05 Aluminium alloy railing Type 'C' of 700mm height with m $139.20 CE07009
20mm diameter jail bars at 300mm centres and
54x54mm barrier post at 1500mm centres embedded in
and including concrete footing as shown in drawings.

6.06 Aluminium alloy railing Type 'D' of 1200mm height with m $227.70 CE07010
20mm diameter jail bars at 120mm centres and
54x54mm barrier post at 1500mm centres embedded in
and including concrete footing as shown in drawings.

6.07 Extra over aluminium alloy railing (all types) for fixing to m $38.00 CE07011
concrete structures complete with aluminium base
plate/case and stainless steel bolts as shown in
drawings.

6.08 40mm diameter nominal bore carbon steel standard m $131.50 M046
safety railing with 12mm square bars at 150mm centre to
centre including galvanising, Grade 20 concrete footing
and painting as shown in drawings.

6.09 Hot-dipped galvanised vehicular impact guard rail m $101.50 M019

complying with the requirements of AASHTO
Designation:M 180 including 150mm x 110mm x 18mm x
4.3mm thick galvanised 'C' channel posts spaced at 4.0
metre centres to centres with concrete surround to
details as shown in drawings.

6.10 Ditto including 150mm x 150mm x 6mm SHS steel posts m $301.30 M020
spaced at 2.0 metre centre to centre and to details as
shown in drawings.

(c) Gratings

6.11 3mm thick hot-dipped galvanised mild steel chequer m² $93.90 M040
plate including all necessary cutting and welding to mild
steel works.
 Page 30 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

6.12 Hot-dipped galvanised mild steel hinged grating overall m² $428.50 M027
41mm thick fabricated with 4.5mm x 25mm intermediate
flats welded with 3mm thick galvanised mild steel
CHEQUER PLATE on top resting on 2 nos. of 10mm
diameter cross bar and supported on 64mm x 45.5mm x
4.5mm galvanised mild steel flat bend angle plate
anchored to structure with fish tail as shown in drawings
(for roadside and outlet drains).

6.13 Hot-dipped galvanised mild steel hinged grating overall m² $320.00 M045
47mm thick fabricated with 6mm x 32mm intermediate
flats spaced at approximately 95mm centres with 3mm
thick galvanised mild steel CHEQUER PLATE on top and
resting on 5 nos. of 12mm diameter m.s. bar supports
and 75mm x 50mm x 7mm m.s. angle frame anchored to
structure with fishtails to details as shown in drawings
(for 2m to 4m wide outlet drain).

6.14 Hot-dipped galvanised m.s. hinged vehicular grating m² $876.50 M030

overall 65mm thick fabricated with 12mm dia. m.s. bars
spaced at 85mm centres, 9mm x 65mm m.s. flats at
30mm centres and support on 75mm x 75mm x 9mm
m.s. angle frame anchored to structure with fishtails to
details as shown in drawings.

6.15 Ditto but with 12mm dia m.s. bars spaced at 120mm m² $737.70 M031
centres and 9mm x 65mm m.s. flats at 35mm centres
and to details as shown in drawings.

6.16 3-piece hot-dipped galvanised mild steel hinged vehicular m² $513.70 M032
grating overall 32mm thick fabricated with 9mm x 32mm
thick intermediate m.s. flats with 10mm diameter m.s. bar
supports on 64mm x 38mm x 4.5mm thick m.s. angle
frame to details as shown in drawings (for
carparks/service roads).

6.17 3-piece hot-dipped galvanised mild steel hinged vehicular m² $540.10 M050
grating overall 35mm thick fabricated with 9mm x 32mm
thick intermediate m.s. flats and 3mm thick
CHEQUERED PLATE welded to top of centre piece and
10mm diameter m.s. bar supports and 64mm x 38mm x
4.5mm thick m.s. angle frame to details as shown in
drawings (for carparks/service roads).
 Page 31 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

6.18 2-piece hot-dipped galvanised mild steel hinged vehicular m² $471.00 CE07005
grating overall 32mm thick fabricated with 9mm x 32mm
thick intermediate m.s. flats with 10mm diameter m.s. bar
supports on 38mm x 38mm x 6mm thick m.s. angle frame
to details as shown in drawings (for service roads).

6.19 Mild steel grating to manhole of storm water pipe conduit no $245.40 CE07001
overall size 836mm x 676mm fabricated with 26mm x
6mm thick and 32mm x 6mm thick flats with 2nos 13mm
diameter mild steel rods all welded together and 38mm x
38mm x 6mm thick angle frame with lugs cast into
concrete to details as shown in drawings.

(d) Raised Platform

6.20 Raised steel platform wash-bay, overall size 9000mm x no $1,621.40 CE07002
3500mm wide consisting of rolled steel joists supports as
framing to receive used sheet pile sections all welded
together to details as shown in drawings (concrete
pavement and water pump measured separately).

(e) Bollards

6.21 90mm diameter x 3.2mm thick hollow section hot-dipped no $138.40 CE07006
galvanised mild steel detachable pipe bollard, 900mm
high above ground with concrete footing and secure to
m.s. fish-tail attached to the footing with a padlock
including necessary painting and excavation as shown
in drawings.

6.22 100mm diameter mild steel detachable pipe bollard no $70.50 M039
900mm high above ground with footing including
necessary painting and excavation as shown in
drawings.

6.23 230mm diameter R.C. bollard 1050mm high above no $83.10 M023
ground with footing and m.s. reinforcements including
necessary excavation as shown in drawings.

6.24 150mm diameter x 150mm high precast concrete bollard no $14.30 CE11025
with 1no of T20mm diameter (200mm long) steel bar
including bedding in cement mortar 1:3 and painting
surfaces with two coats of approved yellow fluorescent
paint.

6.25 6mm diameter galvanised electrically welded steel link m $4.80 M024
chains polished and self coloured.

6.26 Supply of 60mm Yale padlock complete with keys or no $25.00 M052
other approved equivalent.
 Page 32 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

7. WALL/FLOOR FINISHES

7.01 One coat of approved 'Protective Coating' to inner wall m² $6.70 CE08001
surface of box culvert.

7.02 Extra over concrete slab for trowelling floor surface. m² $2.20 SD002A

7.03 20mm thick cement and sand (1:3) rendering to m² $22.80 L008
brickwork or concrete trowelled smooth with steel trowel.

7.04 ADD to (or deduct from) LAST ITEM for each 5mm m² $1.90 L009
thickness over (or under) 20mm.

7.05 20mm thick cement and sand (1:2) rendering to inverts m² $15.60 G014
and benchings. (Measured on plan).

7.06 ADD to (or deduct from) LAST ITEM for each 5mm m² $2.40 G065
thickness over (or under) 20mm (Measured on plan).

7.07 20mm thick granolithic paving consisting of cement, sand m² $15.50 SD019A
and granite chippings (1:1:2) to floor and trowelled to a
smooth finish.

7.08 ADD to (or deduct from) LAST ITEM for each 5mm m² $3.10 SD020A
thickness over (or under) 20mm.

8. PAINTWORK

(a) Concrete and Plastered Surfaces

8.01 One coat of approved synthetic gloss enamel paint to m² $10.60 O065
kerbs, dividers, bollards.

8.02 One coat of primer sealer and one coat of approved m² $11.40 CE09020
synthetic gloss enamel paint to kerbs, dividers and
concrete bollards.

8.03 One coat of approved emulsion paint to concrete m² $2.20 O066

surfaces, parapet walls, etc.

(b) Timber Surfaces

8.04 Two coats of approved wood preservative on wood work. m² $4.70 N025

8.05 Stop, knot with spirit knotting varnish, prime with one m² $13.10 N026
coat wood primer and paint two coats of approved
synthetic enamel paint on woodwork.
 Page 33 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(c) Metal Surfaces

8.06 Brush with steel wire brush to remove all rust, prepare m² $10.30 N022
and apply one coat of lead and chromate free primer or
zinc chromate primer and two coats of approved
synthetic enamel paint on steel and iron-work (girth
measurement).

8.07 Brush with steel wire brush to remove all rust, prepare m² $9.20 N023
and apply one coat of lead and chromate free primer or
zinc chromate primer and two coats aluminium paint on
steel and iron-work (girth measurement).

8.08 Brush with steel wire brush to remove all rust, prepare m² $9.10 N024
and apply one coat of lead and chromate free primer or
zinc chromate primer and two coats red lead oxide paint
on steel and iron-work, one coat before and the other
after erection (girth measurement).

(d) Road Markings

Thermoplastic paint 1.5mm thick for longitudinal

road markings to the following widths and spacings
as shown in drawings or as directed including
cleaning and preparation of road surface, setting out
and aligning road markings, apply primer coat at the
rate of 220 gm per m² apply drop on ballotini glass
beads at the rate of 300 ± 50 gm/m² for surface
reflectorization, and everything else as described in
the Specifications:

8.09 100mm wide lines. m $4.60 O014

8.10 150mm wide lines. m $6.00 O016

8.11 200mm wide lines. m $9.00 O017

8.12 300mm wide lines. m $10.40 O018

8.13 Other road markings exceeding 300mm wide. m² $33.70 O019

8.14 100mm wide zig-zag lines (measured straight along m $5.80 CE09008
the edge of road/kerb).
 Page 34 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Thermoplastic paint 2mm thick for road markings to

the following widths and spacings as shown in
drawings or as directed including cleaning and
preparation of road surface, setting out and aligning
road markings, apply primer coat at the rate of 220
gm per m² apply drop on ballotini glass beads at the
rate of 300 ± 50 gm/m² for surface reflectorization,
and everything else as described in the
Specifications:

8.15 1800mm wide road hump with 150mm wide m $39.10 CE09002
transverse yellow lines spaced at 200mm apart.

8.16 4000mm wide road hump with ditto. m $82.50 CE09003

Thermoplastic paint 3mm thick for longitudinal road

markings to the following widths and spacings as
shown in drawings or as directed including cleaning
and preparation of road surface, setting out and
aligning road markings, apply primer coat at the rate
of 220 gm per m² apply drop on ballotini glass beads
at the rate of 300 ± 50 gm/m² for surface
reflectorization, and everything else as described in
the Specifications:

8.17 200mm wide lines. m $9.40 O025

8.18 300mm wide lines. m $14.50 O026

8.19 455mm wide lines m $22.30 O035

8.20 Single traffic arrows. no $70.50 O027

8.21 Double traffic arrows. no $88.10 O028

8.22 Triple traffic arrows. no $107.60 O029

8.23 Merging traffic arrows. no $121.10 CE09007

8.24 Standard letterings/markings 2520mm height. no $37.40 CE09012

8.25 Standard letterings/markings 310mm height. no $18.40 CE09014

8.26 Standard alphanumeric characters 180mm height. no $15.90 CE09016

8.27 Road markings exceeding 455mm wide. m² $49.10 O038

8.28 Thermoplastic paint 8mm thick x 300mm wide for forming m $42.60 CE09001
regulating strips as shown in drawings or as directed on
site including cleaning and preparation of road surface,
setting out and aligning road markings, apply primer coat
at the rate of 220gm per m² apply drop on ballotini glass
beads at the rate of 300 ± 50 gm/m² for surface
reflectorization, and everything else as described in the
Specifications and other related documents of the
Contract.
 Page 35 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

One coat of white colour water-based acrylic

approved road line paint with mechanical means on:

8.29 Pedestrian or zebra crossings and other road m² $20.10 O054

markings exceeding 300mm wide.

8.30 100mm wide lines. m $2.00 O055

8.31 150mm wide lines. m $3.00 O056

8.32 200mm wide lines. m $4.00 O057

8.33 300mm wide lines. m $6.00 O058

8.34 Single traffic arrows. no $31.10 CE09023

8.35 Double traffic arrows. no $42.90 CE09024

8.36 Triple traffic arrows. no $53.70 CE09025

8.37 Merging traffic arrows. no $36.40 CE09022

8.38 Standard letterings/markings 2520mm height. no $57.50 CE09009

8.39 Standard letterings/markings 1000mm height. no $33.40 CE09019

8.40 Standard letterings/markings 310mm height. no $18.50 CE09010

8.41 Standard alphanumeric characters 180mm height. no $6.60 CE09011

8.42 One coat of white colour road marking water-based no $40.60 O070
acrylic paint for handicap logo with the word
'RESERVED' painted in red on concrete paved parking
lot.

8.43 Extra over items S/N 8.29 to 8.42 for using yellow, red or per 11.60% O080
black colour water-based acrylic road marking paint. centum
 Page 36 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

9. DRAINAGE WORKS

9.1 SEWERS

(a) Blinding to Manhole Base

9.01 75mm thick unwashed sand bed/granite dust or fines as m² $4.60 A048
sealing coat to bottom of manhole base as shown in
drawings.

9.02 75mm thick Grade 15 concrete blinding to bottom of m² $11.10 A068

manhole base including necessary formwork as shown in
drawings.

(b) Type "A" Section Granular Material

Type "A" section approved granular material bed to

sewer line as per details shown in drawings:

9.03 225mm diameter sewer line. m $4.80 B002

9.04 300mm diameter sewer line. m $6.00 B003

9.05 375mm diameter sewer line. m $6.70 B004

9.06 450mm diameter sewer line. m $7.30 B005

9.07 525mm diameter sewer line. m $8.50 B006

9.08 600mm diameter sewer line. m $9.30 B007

9.09 675mm diameter sewer line. m $10.70 B008

9.10 750mm diameter sewer line. m $11.50 B009

9.11 825mm diameter sewer line. m $13.00 B010

9.12 900mm diameter sewer line. m $13.80 B011

9.13 975mm diameter sewer line. m $22.70 B012

9.14 1.050m diameter sewer line. m $23.80 B013

9.15 1.125m diameter sewer line. m $25.60 B014

9.16 1.200m diameter sewer line. m $26.90 B015

9.17 1.350m diameter sewer line. m $39.90 B016

9.18 1.500m diameter sewer line. m $44.20 B017

 Page 37 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Type "A" section approved granular material bed to

sewer line as per details shown in drawings (Cont'd):

9.19 1.650m diameter sewer line. m $48.80 B018

9.20 1.800m diameter sewer line. m $53.50 B019

(c) Type "B" Section Concrete (Without Piling Base)

Grade 30 concrete bed and haunching of Type "B"

section to sewer line complete with 75mm thick
Grade 15 concrete blinding and all necessary
formwork as per details shown in drawings :

9.21 225mm diameter sewer line. m $41.40 C002

9.22 300mm diameter sewer line. m $53.80 C003

9.23 375mm diameter sewer line. m $57.50 C004

9.24 450mm diameter sewer line. m $61.00 C005

9.25 525mm diameter sewer line. m $71.00 C006

9.26 600mm diameter sewer line. m $75.10 C007

9.27 675mm diameter sewer line. m $85.40 C008

9.28 750mm diameter sewer line. m $89.70 C009

9.29 825mm diameter sewer line. m $97.20 C010

9.30 900mm diameter sewer line. m $101.80 C011

9.31 975mm diameter sewer line. m $150.10 C012

9.32 1.050m diameter sewer line. m $155.90 C013

9.33 1.125m diameter sewer line. m $167.90 C014

9.34 1.200m diameter sewer line. m $174.10 C015

9.35 1.350m diameter sewer line. m $229.40 C016

9.36 1.500m diameter sewer line. m $259.90 C017

9.37 1.650m diameter sewer line. m $289.40 C018

9.38 1.800m diameter sewer line. m $319.50 C019

 Page 38 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(d) Type "B" Section Concrete (With Piling Base)

Grade 30 concrete bed and haunching of Type "B"

section to sewer line complete with 75mm thick
unwashed sand bed including steel/fabric
reinforcement and all necessary formwork as per
details shown in drawings where piling is required
(Piling measured separately):

9.39 225mm diameter sewer line. m $80.30 C021

9.40 300mm diameter sewer line. m $97.50 C022

9.41 375mm diameter sewer line. m $103.40 C023

9.42 450mm diameter sewer line. m $109.40 C024

9.43 525mm diameter sewer line. m $124.20 C025

9.44 600mm diameter sewer line. m $130.50 C026

9.45 675mm diameter sewer line. m $145.70 C027

9.46 750mm diameter sewer line. m $152.40 C028

9.47 825mm diameter sewer line. m $162.20 C029

9.48 900mm diameter sewer line. m $171.60 C030

9.49 975mm diameter sewer line. m $229.40 C031

9.50 1.050m diameter sewer line. m $237.50 C032

9.51 1.125m diameter sewer line. m $254.40 C033

9.52 1.200m diameter sewer line. m $262.90 C034

9.53 1.350m diameter sewer line. m $331.70 C035

9.54 1.500m diameter sewer line. m $367.60 C036

9.55 1.650m diameter sewer line. m $404.40 C037

9.56 1.800m diameter sewer line. m $441.60 C038

 Page 39 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(e) Type "C" Section Concrete (Without Piling Base)

Grade 30 concrete bed and haunching of Type "C"

section to sewer line complete with 75mm thick
Grade 15 concrete blinding and all necessary
formwork as per details shown in drawings :

9.57 225mm diameter sewer line. m $51.80 D002

9.58 300mm diameter sewer line. m $73.30 D003

9.59 375mm diameter sewer line. m $76.50 D004

9.60 450mm diameter sewer line. m $79.40 D005

9.61 525mm diameter sewer line. m $102.70 D006

9.62 600mm diameter sewer line. m $105.40 D007

9.63 675mm diameter sewer line. m $122.90 D008

9.64 750mm diameter sewer line. m $125.10 D009

9.65 825mm diameter sewer line. m $143.20 D010

9.66 900mm diameter sewer line. m $145.20 D011

9.67 975mm diameter sewer line. m $217.80 D012

9.68 1.050m diameter sewer line. m $221.20 D013

9.69 1.125m diameter sewer line. m $247.80 D014

9.70 1.200m diameter sewer line. m $250.90 D015

9.71 1.350m diameter sewer line. m $335.10 D016

9.72 1.500m diameter sewer line. m $379.60 D017

9.73 1.650m diameter sewer line. m $424.30 D018

9.74 1.800m diameter sewer line. m $470.20 D019

 Page 40 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(f) Type "C" Section Concrete (With Piling Base)

Grade 30 concrete bed and haunching of Type "C"

section to sewer line complete with 75mm thick
unwashed sand bed including steel/fabric
reinforcement and all necessary formwork as per
details shown in drawings where piling is required
(Piling measured separately):

9.75 225mm diameter sewer line. m $90.80 D021

9.76 300mm diameter sewer line. m $117.20 D022

9.77 375mm diameter sewer line. m $122.60 D023

9.78 450mm diameter sewer line. m $127.90 D024

9.79 525mm diameter sewer line. m $156.10 D025

9.80 600mm diameter sewer line. m $161.10 D026

9.81 675mm diameter sewer line. m $183.40 D027

9.82 750mm diameter sewer line. m $188.10 D028

9.83 825mm diameter sewer line. m $208.50 D029

9.84 900mm diameter sewer line. m $215.30 D030

9.85 975mm diameter sewer line. m $297.40 D031

9.86 1.050m diameter sewer line. m $303.20 D032

9.87 1.125m diameter sewer line. m $334.60 D033

9.88 1.200m diameter sewer line. m $340.20 D034

9.89 1.350m diameter sewer line. m $437.90 D035

9.90 1.500m diameter sewer line. m $487.90 D036

9.91 1.650m diameter sewer line. m $539.80 D037

9.92 1.800m diameter sewer line. m $592.90 D038

 Page 41 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(g) Type "D' Section Concrete (Without Piling Base)

Grade 30 concrete bed and haunching of Type "D"

section to sewer line complete with 75mm thick
Grade 15 concrete blinding and all necessary
formwork as per details shown in drawings :

9.93 225mm diameter sewer line. m $76.30 E002

9.94 300mm diameter sewer line. m $99.70 E003

9.95 375mm diameter sewer line. m $104.70 E004

9.96 450mm diameter sewer line. m $109.30 E005

9.97 525mm diameter sewer line. m $148.40 E006

9.98 600mm diameter sewer line. m $153.50 E007

9.99 675mm diameter sewer line. m $180.80 E008

9.100 750mm diameter sewer line. m $185.90 E009

9.101 825mm diamater sewer line. m $214.70 E010

9.102 900mm diameter sewer line. m $219.50 E011

9.103 975mm diameter sewer line. m $309.70 E012

9.104 1.050m diameter sewer line. m $316.40 E013

9.105 1.125m diameter sewer line. m $352.40 E014

9.106 1.200m diameter sewer line. m $359.00 E015

9.107 1.350m diameter sewer line. m $504.00 E016

9.108 1.500m diameter sewer line. m $556.50 E017

9.109 1.650m diameter sewer line. m $610.70 E018

9.110 1.800m diameter sewer line. m $666.30 E019

 Page 42 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(h) Type "D" Section Concrete (With Piling Base)

Grade 30 concrete bed and haunching of Type "D"

section to sewer line complete with 75mm thick
unwashed sand bed including steel/fabric
reinforcement and all necessary formwork as per
details shown in drawings where piling is required
(Piling measured separately):

9.111 225mm diameter sewer line. m $115.30 E021

9.112 300mm diameter sewer line. m $143.60 E022

9.113 375mm diameter sewer line. m $149.00 E023

9.114 450mm diameter sewer line. m $157.90 E024

9.115 525mm diameter sewer line. m $201.80 E025

9.116 600mm diameter sewer line. m $209.10 E026

9.117 675mm diameter sewer line. m $241.30 E027

9.118 750mm diameter sewer line. m $248.80 E028

9.119 825mm diameter sewer line. m $280.00 E029

9.120 900mm diameter sewer line. m $289.60 E030

9.121 975mm diameter sewer line. m $389.40 E031

9.122 1.050m diameter sewer line. m $398.30 E032

9.123 1.125m diameter sewer line. m $439.20 E033

9.124 1.200m diameter sewer line. m $448.30 E034

9.125 1.350m diameter sewer line. m $605.20 E035

9.126 1.500m diameter sewer line. m $664.70 E036

9.127 1.650m diameter sewer line. m $726.20 E037

9.128 1.800m diameter sewer line. m $789.00 E038

 Page 43 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(i) Vitrified Clay Pipes

Vitrified clay pipes with flexible joints including

rubber rings etc all as per Specifications:

9.129 200mm diameter. m $57.30 CE10032

9.130 225mm diameter. m $63.30 F002

9.131 300mm diameter. m $129.90 F003

(j) UPVC Pipes

UPVC pipes to SS272 with flexible joints including

rubber ring etc all as per Specifications:

9.132 250mm diameter. m $43.10 CE10028

(k) RC Pipes Class `H'

R.C. pipes Class `H' in ordinary portland cement with

spigot and socket and rubber ring joints:

9.133 300mm diameter. m $127.30 F005

9.134 375mm diameter. m $155.90 F007

9.135 450mm diameter. m $187.90 F009

9.136 525mm diameter. m $215.30 F011

9.137 600mm diameter. m $268.40 F013

9.138 675mm diameter. m $304.10 F015

9.139 750mm diameter. m $363.10 F017

9.140 825mm diameter. m $384.20 F019

R.C. pipes Class `H' lined with PVC or HDPE blanket

(spigot and socket or butt ended pipes with loose
collars):

9.141 900mm diameter. m $486.80 F021

9.142 975mm diameter. m $538.80 F023

9.143 1.050m diameter. m $573.20 F025

9.144 1.125m diameter. m $602.50 F027

 Page 44 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

R.C. pipes Class `H' lined with PVC or HDPE blanket

(spigot and socket or butt ended pipes with loose
collars) (Cont'd):

9.145 1.200m diameter. m $618.10 F029

9.146 1.350m diameter. m $752.50 F031

9.147 1.500m diameter. m $863.00 F033

9.148 1.725m diameter. m $1,055.60 F035

9.149 1.800m diameter. m $1,165.70 F037

(l) Reinforced Concrete Pipes Class `M'

R.C. pipes Class `M' in ordinary portland cement with

spigot and socket and with rubber ring joints:

9.150 375mm diameter. m $139.70 F006

9.151 450mm diameter. m $158.30 F008

9.152 525mm diameter. m $181.70 F010

9.153 600mm diameter. m $234.30 F012

9.154 675mm diameter. m $264.10 F014

9.155 750mm diameter. m $301.90 F016

9.156 825mm diameter. m $331.50 F018

(m) Cast Iron Pipes

Heavy duty cast iron pipe with flexible joint as

specified:

9.157 225mm diameter. m $94.90 G047

9.158 300mm diameter. m $111.30 G048

9.159 100mm diameter cast iron spigot and socket vent pipe m $47.50 G049
fixed complete including all fittings, etc as specified.
 Page 45 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(n) Pipes in BackDrops/Tumbling Bays

Vitrified clay pipes or concrete pipes in backdrops,

tumbling bays, raised junction connections, etc
including cutting to required length:

9.160 200mm diameter. m $46.40 CE10033

9.161 225mm diameter. m $76.40 F042

9.162 300mm diameter. m $151.20 F045

Extra over 200mm diameter vitrified clay pipes or

concrete pipes for:

9.163 Bend. no $182.00 CE10034

9.164 Junction. no $313.40 CE10035

Extra over 225mm diameter vitrified clay pipes or

concrete pipes for:

9.165 Bend. no $66.60 F043

9.166 Junction. no $196.20 F044

Extra over 300mm diameter vitrified clay pipes or

concrete pipes for:

9.167 Bend. no $41.30 F046

9.168 Junction. no $254.20 F047

(o) Concrete Rings and Surround to Manhole

Precast reinforced concrete wall in tubes as manhole

chamber including supply and lay 150mm thick
Grade 30 concrete surround and necessary formwork
as shown in drawings :

9.169 1.050m diameter. m $773.80 G054

9.170 1.200m diameter. m $907.40 G055

 Page 46 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Precast reinforced concrete wall in tubes as manhole

chamber including supply and lay 150mm thick
Grade 30 concrete surround and necessary formwork
as shown in drawings (Cont'd):

9.171 1.350m diameter. m $1,016.30 G056

9.172 1.500m diameter. m $1,155.50 G057

9.173 1.800m diameter. m $1,507.40 G058

(p) Concrete Cover Slabs & PC Unit for Manhole

Precast or cast-in-situ concrete cover slab, underside

to be PVC lined, to brick/cast-in-situ concrete access
shaft all as shown in drawings :

9.174 150mm thick to access shaft with 600mm x 600mm no $407.10 G026
square opening.

9.175 225mm thick to access shaft with 750mm x 750mm no $518.10 G027
square opening.

200mm thick precast concrete slab to tube chamber,

underside to be PVC lined, including concrete
surround and formwork all as shown in drawings :

9.176 1.050m diameter. no $655.60 G028

9.177 1.200m diameter. no $918.10 G029

9.178 1.350m diameter. no $1,187.20 G030

9.179 1.500m diameter. no $1,380.70 G031

9.180 1.800m diameter. no $1,833.00 G032

200mm thick precast concrete intermediate slab to

tube chamber, underside to be PVC lined, including
concrete surround and formwork all as shown in
drawings :

9.181 1.500 m diameter. no $1,556.40 G033

9.182 1.800m diameter. no $1,833.00 G034

 Page 47 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Precast reinforced concrete unit for manhole, overall

size 800 x 800 comprising of 100mm thick wall
including bedding in cement mortar (1:3) and Grade
30 concrete surround to details as shown in
drawings :

9.183 100mm high. no $68.20 CE10020

9.184 200mm high. no $88.00 CE10021

(q) Manhole Cover and Frame, Ladder, Railings, etc.

Double triangular manhole cover and frame including

bedding frame in cement and sand mortar (1:3) and
Grade 30 concrete surround to details as shown in
drawings :

9.185 Overall dimensions 800mm x 800mm x 140mm no $230.10 G035

heavy duty cover.

9.186 Overall dimensions 750mm x 750mm x 90mm no $122.60 G036

medium duty cover.

9.187 Aluminium ladder 450mm wide including stringers, rungs m $66.50 G038
to details as shown in drawings.

9.188 Aluminium ladder holder bracket and shoe to details as set $57.70 G039
shown in drawings (For 1 no. of ladder).

9.189 44mm (external) diameter x 1000mm high aluminium m $91.60 G040

alloy handrailing including screwed bends, junctions,
flanged bottom to details as shown in drawings.

9.190 Aluminium alloy safety link chain including hooks and no $24.10 G041
end rings to details as shown in drawings.

Stainless steel safety chain including stainless steel

plate, hook and eye and shackle to details as shown
in drawings for:

9.191 750mm to 825mm diameter sewer. set $142.20 G042

9.192 900mm to 1050mm diameter sewer. set $154.30 G043

9.193 1200mm diameter sewer and above. set $166.40 G044

 Page 48 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

16mm diameter multi-strand poly-propylene nylon

rope as safety chain including stainless steel plate,
hook and eye and shackle to details as shown in
drawings for:

9.194 750mm to 825mm diameter sewer. set $27.30 CE10005

9.195 900mm to 1050mm diameter sewer. set $27.70 CE10006

9.196 1200mm diameter sewer and above. set $28.00 CE10007

9.197 Malleable cast iron step all in accordance with BS 1247. kg $24.60 G045

9.198 Ductile cast iron manhole cover and frame overall no $240.30 M036
dimensions 850mm x 850mm x 100mm including
bedding frame as shown in drawings.

9.199 Supply of 6mm diameter `T-shape' galvanised mild steel no $3.20 CE10025
lifting key (for opening of drain grating/cover slab) as
shown in drawings.

(r) Other Works

9.200 Provide hole through existing manhole wall for sewer no $33.30 CE10036
inlet or outlet not exceeding 300mm diameter and make
good after fixing (cost of pipe etc to be included).

9.201 200mm diameter vitrified clay pipe inlet to manhole for no $31.00 CE10037
house sewer connection including jointing and plugging
with stopper (Cost of pipes etc included).
 Page 49 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

9.202 Raise or lower level of manhole cover not exceeding no $592.80 G053
300mm including breaking concrete, brickwork, re-
concreting, re-fixing manhole cover and frame and
making good after completion (Supply and installation of
precast tube, if any, shall be measured separately).

9.203 Painting and greasing of manhole frame and cover no $32.40 G059
including preparation of surface by scraping and
removing of rust, mill scale concrete waste, etc.

Tunnel with proper timber strutting, supply, lay and

join flexible joint vitrified clay pipe with spigot and
socket rubber ring joint and concrete surround all as
specified:

9.204 225mm diameter. m $1,158.90 H002

Tunnel with proper timber strutting, supply, lay and

join Class "M" concrete pipe with spigot and socket
rubber ring joint and concrete surround all as
specified:

9.205 300mm diameter. m $1,425.80 H003

9.206 450mm diameter. m $1,679.00 H004

9.207 600mm diameter. m $1,991.00 H005

Pipe Jacking of vitrified clay pipes all as specified:

9.208 200mm diameter. m $701.50 CE10011

9.209 225mm diameter. m $736.00 CE10027

9.210 250mm diameter. m $770.50 CE10012

9.211 300mm diameter. m $839.50 CE10013

9.212 400mm diameter. m $908.50 CE10014

Pipe Jacking of Class "H" concrete pipe all as

specified:

9.213 225mm diameter. m $782.00 H011

9.214 300mm diameter. m $885.50 H012

9.215 375mm diameter. m $920.00 H015

9.216 450mm diameter. m $989.00 H013

9.217 525mm diameter. m $1,058.00 H016

9.218 600mm diameter. m $1,127.00 H014

 Page 50 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

9.2 DRAINS

(a) Half Round and Composite Drain Channels and

Block Drains

Half-round precast concrete drain channels true to

line and level as shown in drawings:

9.219 150mm diameter (Type C1). m $10.30 J001

9.220 230mm diameter (Type C2). m $11.10 J002

9.221 305mm diameter (Type C3). m $12.70 J003

9.222 380mm diameter (Type C4). m $13.40 J004

9.223 455mm diameter (Type C5). m $15.20 J005

9.224 535mm diameter (Type C6). m $16.30 J006

Precast concrete composite drain channels as

specified true to line and level as shown in drawings
(Excavation, sand bed and bakau roller measured
separately):

9.225 300mm (Type C7). m $32.50 J008

9.226 300mm (Type C7A). m $32.50 J070

9.227 300mm (Type C7B). m $32.50 J072

9.228 380mm (Type C8A). m $40.90 J009

9.229 455mm (Type C8B). m $63.70 J010

 Page 51 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Standard precast concrete block drain as specified,

true to line and level as shown in drawings
(Excavation, sand bed and bakau rollers measured
separately):

9.230 305mm (Type B1). m $31.70 J016

9.231 380mm (Type B2). m $36.20 J017

9.232 600mm (Type B3). m $71.50 J018

(b) Drain Opening Cover Slabs, Catch-Basin and

Others

9.233 3-piece precast concrete Grade 40 drain opening cover no $68.00 CE10029
slab each size 277mm x 569mm x 25mm thick reinforced
with a layer of 25mm x 25mm x 1.5mm thick fine mesh
laid on and including 3mm thick galvanised mild steel flat
plate and 64mm x 38mm x 4.5 mm thick galvanised mild
steel angle frame to details as shown in drawings.

9.234 Precast concrete Grade 40 drain opening cover slab no $16.90 CE10030
overall size 277mm x 569mm x 25mm thick reinforced
with a layer of 25mm x 25mm x 1.5mm thick fine mesh
laid on and including 3mm thick galvanised mild steel flat
plate to details as shown in drawings.

9.235 Extra over for forming 1 no keyhole in precast concrete no $1.00 CE10031
drain opening cover slab.

9.236 Catch-basin overall size 780mm x 500mm x 575mm (for no $170.40 J074
bus bay) including precast reinforced concrete slab
cover, galvanised mild steel angle frame, base plate and
aluminium vertical grating all as shown in drawings.

9.237 Non-slip aluminium rungs 300mm wide, made out of no $25.50 J062
25mm diameter aluminium ribbed rung type rods as
shown in drawings.

(c) Sub-soil Pipes and Scupper Drains

Perforated UPVC sub-soil pipe to SS141 Class "B"

with flexible joints:

9.238 80mm diameter. m $10.10 CE10002

9.239 100mm diameter. m $10.10 K052

9.240 150mm diameter. m $13.80 K053

 Page 52 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

High density polyethylene (HDPE) part-perforated

corrugated sub-soil pipe with plug-in connection:

9.241 DN 80 (80mm diameter). m $9.10 CE10016

9.242 DN 100 (100mm diameter). m $10.00 CE10017

9.243 DN 150 (150mm diameter). m $16.00 CE10018

9.244 DN 200 (200mm diameter). m $29.00 CE10019

9.245 250mm external diameter UPVC drain pipe to SS272 m $76.10 K066
(minimum wall thickness 6.1mm) with maximum one joint
and Grade 30 reinforced concrete surround and
haunching to pipe laid on a layer of 100mm thick granite
fine bed as shown in drawings.

Provide hole through drain wall for UPVC pipe outlet,

etc and make good after fixing for (UPVC pipe
measured separately):

9.246 100mm or 150mm diameter pipe outlet. no $4.40 K044

9.247 250mm diameter pipe outlet. no $7.20 K045

9.248 230mm wide x 450mm deep standard precast concrete m $29.20 CE10026
open scupper drain channel (Type S1) true to line and
levels as shown in drawings (Excavation, sand bed and
bakau rollers measured separately).

9.249 Provide scupper opening (varies from 225mm to 250mm no $7.90 CE10004
in width and 50mm to 75mm in height respectively)
through drain wall using metal formwork.

9.250 Precast concrete wall overall size 400mm x 300mm x no $25.30 CE11041
150mm thick with 250mm wide x 75mm high scupper
opening (with 4nos 10mm diameter mild steel bar).

9.251 Precast concrete drop-inlet chamber 980mm x 475mm x no $145.30 K057

425mm deep including hot-dipped galvanised mild steel
hinged grating to details as shown in drawings.
 Page 53 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

9.252 300mm x 300mm x 350mm deep (internal size) precast no $59.20 K067
concrete sump comprising of 100mm thick sides and
bottom reinforced with WSF B6 and B5, T13mm diameter
steel bars including 380mm x 380mm x 75mm precast
concrete cover slab reinforced with WSF A5 as shown
in drawings.

9.253 Precast concrete scupper mouth unit. no $18.20 K058

9.254 Precast concrete catch basin mouth unit, overall size no $22.00 CE10024
1100mm x 250mm x 100mm thick (for bus bay) as shown
in drawings.

9.255 Crusher run sub-drains 300 mm wide x 375mm deep m $20.40 L003
wrapped with synthetic membrane (geotextiles with a
minimum flow rate of 150l/s/m2 (10cm head) and a
tensile strength of 400N/5cm) under footpaths or below
road formation including necessary excavation.

9.256 Add to last item for each additional 100mm increase in m $5.10 L020
depth.

(d) Weepholes

UPVC pipe to SS213:1979 as weephole not exceeding

300mm long:

9.257 50mm diameter. no $3.00 M009

9.258 65mm diameter. no $3.20 M042

9.259 80mm diameter. no $4.90 M010

9.260 100mm diameter. no $7.90 M011

9.261 300mm x 300mm Geotextile membrane to side of drain no $2.20 CE10003

wall at weepholes all as specified.

9.262 225mm x 225mm loose rubble packing to sides of drains, m $6.80 L004
retaining walls etc behind weepholes including necessary
excavation.

9.263 500mm wide synthetic membrane (geotextiles with a m $3.10 L021

minimum flow rate of 150l/s/m2 (10cm head) and a
tensile strength of 400N/5cm) strip to side of retaining
wall, etc (excavation measured separately).
 Page 54 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(e) Silt Traps, Water Trough & Vibration Access

Reinforced Concrete temporary silt trap for drains,

including unwashed sand bed to details as shown in
drawings (excavation measured separately):

9.264 Overall size 1920mm x 2430mm x 1645mm depth no $2,114.10 CE10008

(Type A).

9.265 Overall size 2800mm x 4050mm x 2400mm depth, no $5,599.40 CE10009

complete with 1200mm high timber fencing surround
with one coat of enamel paint, set in and including
concrete footings, "DANGER-KEEP OUT" warning
signboards (Type B).

9.266 Water trough, overall size 21200mm x 3500mm wide no $5,843.70 CE10022
comprising of 200mm thick reinforced concrete base slab
and 9000mm x 3500mm wide steel platform made out of
roll steel joists supports as framings to receive steel
angle sections all welded together with and including
concrete lining to details as shown in drawings
(excavation and earth drain measured separately).

9.267 Vibration access, overall size 6000mm x 3500mm wide no $1,470.00 CE10023
comprising of 200mm thick reinforced concrete base slab
and 2 nos of 6000mm x 1000mm wide steel platform
made out of mild steel angle sections as
framings/supports all welded together with and including
hardcore bed to details as shown in drawings (excavation
and precast channel drain measured separately).

10. ROADS AND PAVINGS

10.1 Roads

(a) Road Base

10.01 Class 'A' synthetic geotextile membrane on road m² $3.30 CE11018

formation.

10.02 50mm thick ash or unwashed sand bed on consolidated m² $5.30 J054
road formation.

10.03 Coarse granite aggregate (crusher run) road base m³ $79.60 J073
blinded with 20mm aggregate all as specified, deposited,
spread, levelled, rolled and mechanically consolidated
true to level and camber.
 Page 55 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

10.04 Consolidation of road base with a powered roller. m² $2.30 J059

10.05 Plant Mixed Crushed Granite Aggregate (max. size m³ $54.90 J060
50mm & below), deposited, spread, levelled, rolled and
mechanically consolidated true to level and camber.

10.06 Sub-base materials (quarry/premix waste) deposited and m³ $54.20 CE11017

compacted to level and camber.

(b) Bituminous Premix

Premix bituminous surfacing including rolling with

light and heavy rollers successively as specified
(including bituminous emulsion tack coat):

10.07 Type "B1" to a consolidated thickness of 75mm. m² $17.40 CE11004

10.08 Type "B1" to a consolidated thickness of 90mm. m² $20.40 CE11005

10.09 Type "B1" to a consolidated thickness of 120mm. m² $27.40 CE11006

10.10 Type "W3" to a consolidated thickness of 25mm. m² $5.50 CE11007

10.11 Type "W3" to a consolidated thickness of 40mm. m² $8.50 CE11008

10.12 Type "W3B" to a consolidated thickness of 25mm. m² $5.50 CE11009

10.13 Type "W3B" to a consolidated thickness of 50mm. m² $11.50 CE11010

10.14 Extra over for forming 1800mm wide hump with Type m $72.00 CE11011
"W3B" premix including painting as shown in drawings.

10.15 Extra over for forming 4000mm wide hump with Type m $182.90 CE11012
"W3B" premix including painting as shown in drawings.

10.16 Extra over for forming 5800 mm wide raised zebra m $230.50 CE11027
crossing with Type "W3B" premix including painting as
shown in drawings.
 Page 56 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

The rate for mobilisation of plant and equipment

under this sub-heading is applicable for the laying of
asphalt premix instructed by way of works
instructions or works order given by the SO Rep.

10.17 Mobilisation of mechanical spreader for the laying of item $805.00 CE15036
asphalt premix including all necessary fuel and driver.

10.18 Mobilisation of milling machine for the laying of asphalt item $2,501.30 CE15037
premix including all necessary fuel and driver.

10.19 Mobilisation of mechanical sweeper for the laying of item $862.50 CE15038
asphalt premix including all necessary fuel and driver.

10.20 Mobilisation of pneumatic type roller for the laying of item $805.00 CE15039
asphalt premix including all necessary fuel and driver.

10.21 Mobilisation of static 10-tonne roller for the laying of item $805.00 CE15040
asphalt premix including all necessary fuel and driver.

10.22 Mobilisation of vibratory roller for the laying of asphalt item $805.00 CE15041
premix including all necessary fuel and driver.

10.2 PAVINGS

(a) Concrete Paving Slabs

Concrete paving slab including 50mm granite fines or

unwashed sand bed and jointing in cement mortar
(1:3):

10.23 50mm thick. m² $35.20 K012

10.24 75mm thick. m² $56.80 K011

10.25 100mm thick Grade 30 cast-in-situ concrete paving slab m² $62.90 K078
reinforced with WSF A10 reinforcement with patterned
voids at 200mm centre to centre formed by expanded
polystyrene formers as carpark lots, on 40mm thick
granite fines including necessary formwork and providing
approved soil mixture to voids and close turf with cow
grass as shown in drawings.

10.26 150mm thick Grade 30 cast-in-situ concrete paving slab m² $84.50 K079
reinforced with 2 layers of WSF A10 reinforcement with
patterned voids at 200mm centre to centre formed by
expanded polystyrene formers as lorry parking lots, on
40mm thick granite fines including necessary formwork
and providing approved soil mixture to voids and close
turf with cow grass as shown in drawings.
 Page 57 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(b) BG Slabs

10.27 600mm x 400mm x 120mm "B.G. Slabs" on 50mm sand no $13.70 K015
bed, topping up all voids with approved soil mixture and
turfing including trimming and excavation to formation as
shown in drawings.

(c) Aeration Slabs

10.28 600mm x 600mm x 75mm thick precast concrete aeration no $20.90 K019
slab reinforced with T9mm diameter steel bars on 40mm
thick granite fines to carpark or tree planting area
including topping up all voids with approved soil mixture
and close turf with cow grass.

10.29 75mm thick grade 30 concrete reinforcing tee overall size no $4.80 B020
175mm x 175mm for corners of precast concrete
aeration slabs reinforced with galvanised weldmesh 228.

(d) Interlocking Concrete Paving Blocks

10.30 Interlocking paving slabs for carparking lots to approved m² $54.00 CE11033
pattern comprising of 456mm x 456mm x 100mm thick
natural grey coloured perforated interlocking conrete
slabs, 228mm x 114mm x 100mm thick coloured
interlocking concrete paving blocks with combination of
white coloured paving blocks for demarcation lines,
including 30mm thick compacted sand bed and topping
up voids with approved soil mixture and close turfing with
cow grass and filling all joints with joint-filling sand as
shown in drawings.

10.31 Coloured interlocking concrete paving blocks for m² $49.70 CE11034

handicapped and motor-cycle parking lots comprising of
228mm x 114mm x 100mm thick blocks laid to approved
pattern and with combination of white coloured paving
blocks for demarcation lines, including 30mm thick
compacted sand bed and filling all joints with joint-filling
sand as shown in drawings.

10.32 Coloured interlocking concrete paving blocks comprising m² $46.50 CE11043

of 228mm x 114mm x 100mm thick blocks laid to
approved pattern including 30mm thick compacted sand
bed and filling all joints with joint-filling sand as specified.

10.33 Extra over 228mm x 114mm x 100mm interlocking m² $11.90 CE11036

concrete paving blocks for forming raised hump at
linkway service roads.
 Page 58 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

10.34 Extra over 228mm x 114mm x 100mm interlocking m $15.40 CE11037

concrete paving blocks for forming 1800mm wide road
hump across interlocking paving driveways.

10.35 Extra over 228mm x 114mm x 100mm coloured no $65.70 CE11035

interlocking concrete paving blocks for forming handicap
logo with white coloured paving blocks.

Coloured interlocking concrete paving blocks to

approved pattern including 50mm thick compacted
sand bed and filling all joints with joint-filling sand as
specified:

10.36 Size 225mm x 112.5mm x 80mm thick. m² $47.40 SD077A

10.37 Size 225mm x 112.5mm x 100mm thick. m² $49.30 SD078A

10.38 Extra over 225mm x 112.5mm x 80mm thick interlocking m² $12.50 CE11024
concrete paving blocks for forming raised hump at
linkway service roads comprising of plant mixed crushed
granite aggregate.

10.39 Extra over 225mm x 112.5mm x 80mm thick interlocking m $11.60 CE11001
concrete paving blocks for forming 1800mm wide road
hump across interlocking paving driveways as shown in
drawings.

(e) Expansion Joints

10.40 12mm wide x 25mm deep expansion joint filled with m $4.30 K024
40/50 bitumen to cast-in-situ footpath and cycle track.

10.41 15mm x 200mm deep self expanding cork with 25mm m $19.70 K074
diameter mild steel bar 600mm long half the length
treated with bituminous paint and its end covered with a
metal cap bedded across the joint at 450mm centres and
to details shown in drawings.

10.42 13mm x 200mm compressed foam plastic strip. m $3.00 K026

10.43 25mm x 20mm x 2mm/5mm thick `L' shaped UPVC m $7.00 K070
plastic strip laid to cast-in-situ drain top slab/concrete
pavement/kerb foundation as expansion joint as shown
in drawings.

10.44 Longitudinal joint of heavy duty sealant with T13mm m $15.00 K076
diameter bars x 800mm long spaced at 600mm centres
to detail shown in drawings.
 Page 59 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

10.45 25mm wide x 200mm deep expansion joint with m $12.60 CE11044
FLEXCELL fibre board filler.

10.46 175mm wide x 3mm thick lead bearing plate. m $20.30 CE11045

(f) Kerbs, Dividers, etc.

10.47 125mm x 125mm precast concrete kerb including jointing m $12.50 K036
in cement mortar to details as shown in drawings.

10.48 125mm x 300mm precast concrete kerb including jointing m $17.80 K032
in cement mortar to details as shown in drawings.

10.49 Extra over 125mm x 125mm precast concrete kerb for m $19.00 CE11042
using 125mm x 125mm x 300mm high precast concrete
kerb at sharp corners.

Precast concrete kerb including jointing in cement

mortar to details as shown in drawings :

10.50 125mm x 280mm (with 20mm diameter mild steel m $18.20 CE11014
bar).

10.51 125mm x 280mm x R350mm precast concrete kerb no $16.70 CE11038

(with 2 nos 20mm diameter mild steel bars, each
150mm long).

10.52 Extra over 125mm x 280mm precast concrete kerb for m $39.90 CE11031
using 125mm x 105mm - 160mm (overall plan size) x
280mm high precast concrete kerb (with 20mm diameter
mild steel bar) for turning radius not exceeding 1.0m.

10.53 Extra over 125mm x 280mm precast concrete kerb for m $16.80 CE11032
using 125mm x 260mm - 300mm (overall plan size) x
280mm high precast concrete kerb (with 20mm diameter
mild steel bar) for turning radius exceeding 1.0m but not
exceeding 2.0m.

10.54 Extra over 125mm x 280mm precast concrete kerb for m $17.80 CE11039
using 125mm x 290mm - 300mm (overall plan size) x
280mm high precast concrete kerb (with 20mm diameter
mild steel bar) for turning radius exceeding 2.0m but not
exceeding 6.0m.
 Page 60 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

10.55 Extra over 125mm x 280mm precast concrete kerb for m $16.80 CE11040
using 125mm x 300mm (overall plan size) x 280mm high
precast concrete kerb (with 20mm diameter mild steel
bar) for turning radius exceeding 2.0m but not exceeding
6.0m.

Precast concrete divider kerb specially cast solid

including jointing in cement mortar to details as
shown in drawings:

10.56 300mm x 150mm. m $28.00 K037

10.57 380mm x 200mm. m $36.10 K038

10.58 190mm x 90mm red bull-nose brick kerb laid in cement m $19.20 K072
mortar (1:3) all as shown in drawings.

10.59 225mm x 150mm x 150mm precast concrete road lane no $31.90 CE11046
divider with 2 nos of 51mm diameter reflector disc
secured to concrete surface and including painting,
concrete foundation and excavation.

10.60 Flexible reflective road lane divider including Grade 30 no $88.50 CE11016
concrete footing as shown in drawings.

(g) Pipe Crossings

UPVC pipe to SS141 Class `B' for crossing with 3mm

diameter nylon rope (minimum protruded length
1000mm) including sand bed for car park/street
lighting:

10.61 80mm diameter. m $5.00 CE11019

10.62 100mm diameter. m $6.20 CE11020

10.63 150mm diameter. m $10.90 CE11021

Class 'B' galvanised iron pipes for crossing with

3mm diameter nylon rope (minimum protruded length
1000mm) including sand bed for car park/street
lighting:

10.64 80mm diameter. m $20.50 CE11022

10.65 100mm diameter. m $27.00 CE11023

 Page 61 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

11. SIGNAGES

(a) Directional Signs

11.01 80mm diameter Galvanised Iron Pipe Supports to no $120.00 O067

directional signboard welded with 200mm x 200mm x
12mm thick mild steel plate and embedded in 400mm x
400mm x 800mm depth Grade 20 concrete foundation
including excavation as specified in drawings.

125mm x 125mm x 6mm SHS Supports to directional

signboard painted with one coat of red lead primer
and two coats of approved quality paint, welded with
300mm x 300mm x 12mm mild steel plate and
embedded in Grade 30 concrete foundation including
excavation as specified in drawings:

11.02 Supports with 600mm x 600mm x 1375mm deep pair $527.80 O068
concrete foundation.

11.03 Supports with 800mm x 800mm x 1375mm deep pair $664.70 O081
concrete foundation.

11.04 Supports with 900mm x 900mm x 1375mm deep pair $743.50 O082
concrete foundation.

Illuminated plastic signboard size 1500mm x 900mm

comprising of 100mm x 23mm U-channel elephant
grey powder coated finish main frame filled in on
both faces with 5mm thick clear polycarbonate
plastic sheet with green translucent sticker on the
reverse side complete with all letterings,
graphics/logos, hinges, masterkeyed locksets,
fluorescent tubes, flexible electric cables and
weather proof termination box and the signboard
mounted onto and including 2nos 3mm thick x
110mm diameter semi-circular natural anodised
aluminium post and all necessary Grade 20 concrete
foundation and excavation as specified in drawings
for:

11.05 Directional signboard for Apartment/Industrial Blocks. no $1,419.40 CE12042

11.06 Multi-storey carpark. no $1,419.40 CE12009

 Page 62 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

`Curve Alignment Marker' sign comprising of 1 no

2.03mm (14SWG) thick aluminium base plate with
diamond grade retro-reflective sheetings with
graphics on one face to LTA's requirements as
shown in drawings and fixed to hot-dipped
galvanised SHS posts for sign, set in and including
concrete footings, excavation and disposal of
excavated materials from site.

11.07 Size 600mm x 750mm (for Arterial Road). no $277.50 CE12044

11.08 Size 750mm x 900mm (for Expressway). no $395.60 CE12053

`Object Marker' sign comprising of 1 no 2.03mm

(14SWG) thick aluminium base plate with micro
prismatic reflective grade sheetings with graphics
on one face to LTA's requirements as shown in
drawings and fixed to hot-dipped galvanised SHS
posts for sign, set in and including concrete footings,
excavation and disposal of excavated materials from
site.

11.09 Size 600mm x 600mm. no $230.20 CE12054

11.10 Size 340mm x 900mm. no $201.90 CE12055

11.11 Size 900mm x 900mm. no $466.40 CE12056

11.12 `Barrier' sign size 1520mm x 400mm comprising of 1no no $424.60 CE12011
2.03mm (14SWG) thick aluminium base plate with
diamond grade retro-reflective sheetings with graphics on
one face to LTA's requirements as shown in drawings
and fixed to hot-dipped galvanised SHS posts, set in and
including concrete footings, excavation and disposal of
excavated materials from site.
 Page 63 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Block Directional Signboard comprising of 2 nos.

aluminium framed 16 SWG aluminium sign plates,
with diamond grade retro-reflective sheetings with
numerals, alphabets and arrows mounted to both
sides, fixed to and including 2 nos of 50.8mm x
50.8mm x 4mm galvanised SHS supports (2700mm
high from ground level) welded with 200mm x
200mm x 6mm thick mild steel plate and embedded
in 350mm x 350mm x 500mm deep Grade 20
concrete foundation including painting and
excavation as shown in drawings:

11.13 Size 1350mm x 750mm. no $1,168.50 CE12045

11.14 Size 1350mm x 550mm. no $885.00 CE12046

Road directional, confirmatory signboard and

neighbourhood maps mounted on and including all
necessary mild steel framing supports and painting
(post and footing measured separately):

11.15 Comprising 1 no 14SWG aluminium base plate with m2 $689.40 CE12051

diamond grade retro-reflective sheeting, letterings,
numerals and figures on one face.

11.16 Comprising 2 nos 14SWG aluminium base plates m2 $815.90 CE12052

with diamond grade retro-reflective sheeting,
letterings, numerals and figures on exposed faces.

200mm high Street Name plate not exceeding 1.50m

length made out of aluminium `I' extrusion with
diamond grade retro-reflective sheeting (white) and
vinyl film non reflective alphabets and numerals
printed on both faces as shown in drawings:

11.17 5mm thick aluminium sign plate overall size 100mm x no $15.10 CE12006
75/50mm with letterings for services crossing at
driveways including hacking of kerb and plastering
sign plate with cement mortar onto concrete
kerb/drain kerb as shown in drawings.
 Page 64 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(b) Traffic Signs

Traffic Signs comprising of 2.03mm (14SWG) thick

Aluminium base plate with micro prismatic grade
reflective sheetings with letterings and graphics on
one face to LTA's requirements as shown in
drawings (Irrespective of letterings and graphics):

11.18 600mm x 150mm and fixed to hot-dipped galvanised no $88.50 P030

SHS post set in and including precast concrete
footing, excavation and disposal of excavated
materials from site.

11.19 600mm x 400mm and fixed to ditto. no $167.20 CE12001

11.20 600mm x 450mm and fixed to ditto. no $183.00 P031

11.21 600mm x 600mm and fixed to ditto. no $230.20 P032

11.22 600mm x 900mm and fixed to ditto. no $324.70 CE12002

 Page 65 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Traffic Signs comprising of 2.03mm (14SWG) thick

Aluminium base plate with diamond grade retro-
reflective sheetings with letterings and graphics on
one face to LTA's requirements as shown in
drawings (Irrespective of letterings and graphics)
(Cont'd):

11.23 2 nos. of 600mm x 600mm and fixed to hot-dipped no $419.20 CE12003

galvanised SHS post set in and including precast
concrete footing, excavation and disposal of
excavated materials from site.

11.24 2 nos. of 600mm x 600mm and 2 nos. arrow signs no $513.70 CE12008
each 600mm x 150mm and fixed to ditto.

11.25 1 no. of 600mm x 900mm and 1 no. of 600mm x no $466.40 CE12031

450mm and fixed to ditto.

11.26 900mm x 900mm and fixed to ditto. no $466.40 CE12032

11.27 2 nos. of 900mm x 900mm and fixed to ditto. no $891.60 CE12033

11.28 900mm x 1200mm and fixed to ditto. no $608.20 CE12034

11.29 600mm x 150mm and fixed to 6mm thick aluminium no $79.80 CE12015
sign holder secured to lamp post by 19mm wide
stainless steel band with buckle.

11.30 600mm x 400mm and fixed to ditto. no $158.60 CE12016

11.31 600mm x 450mm and fixed to ditto. no $174.30 CE12017

11.32 600mm x 600mm and fixed to ditto. no $221.60 CE12018

11.33 600mm x 900mm and fixed to ditto. no $316.10 CE12019

11.34 2 nos. of 600mm x 600mm and fixed to ditto. no $436.40 CE12020

11.35 2 nos. of 600mm x 600mm and 2 nos. arrow signs no $589.40 CE12021
each 600mm x 150mmand fixed to ditto.

11.36 1 no. of 600mm x 900mm and 1 no. of 600mm x no $483.70 CE12035

450mm and fixed to ditto.

11.37 900mm x 900mm and fixed to ditto. no $457.80 CE12037

11.38 2 nos. of 900mm x 900mm and fixed to ditto. no $908.90 CE12038

11.39 600mm x 1200mm and fixed to ditto. no $410.60 CE12036

11.40 900mm x 1200mm and fixed to ditto. no $599.50 CE12039

 Page 66 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

"Exit" sign comprising of 2.03mm (14SWG) thick

aluminium base plate with diamond grade retro-
reflective sheetings with alphabets and arrows as
shown in drawings:

11.41 Alternative `A' (Single Face) with 50.8mm x 50.8mm no $230.20 CE12047
x 4mm thick galvanised SHS post set in and
including concrete footing, excavation and disposal
of excavated materials from site.

11.42 Alternative `B' (Single Face) with ditto. no $239.40 CE12048

11.43 Alternative `A' (Double Face) with 40mm diameter no $419.20 CE12049
galvanised iron class `A' post set in and including
concrete footing, excavation and disposal of
excavated materials from site.

11.44 Alternative `B' (Double Face) with ditto. no $428.40 CE12050

11.45 Alternative `A' (Single Face) and fixed to 6mm thick no $221.60 CE12022
aluminium sign holder secured to lamp post by 19mm
wide stainless steel band with buckle.

11.46 Alternative `B' (Single Face) and fixed to ditto. no $217.40 CE12023

11.47 Alternative `A' (Double Face) and fixed to 6mm thick no $436.40 CE12024
aluminium sign holder secured to lamp post by 19mm
wide stainless steel band with buckle.

11.48 Alternative `B' (Double Face) and fixed to ditto. no $428.00 CE12025

11.49 "Handicap Logo" sign plate size 650mm x 650mm cum no $423.30 CE12013
"Unauthorized Vehicles Fine $400" plate size 650mm x
450mm comprising of 2.03mm (14SWG) thick aluminium
base plate with diamond grade retro-reflective sheetings
with letterings and graphics on one face, hot dipped
galvanised SHS post for sign, set in and including
concrete footing; excavation and disposal of excavated
materials from site.
 Page 67 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

11.50 "NO ENTRY" sign plate size 600mm x 600mm cum no $356.20 CE12029
"EXCEPT FIRE ENGINE" plate size 600mm x 400mm
comprising of 2.03mm (14SWG) thick aluminium base
plate with diamond grade retro-reflective sheetings with
letterings and graphics on one face and fixed to hot
dipped galvanised SHS post, set in and including precast
concrete footing, excavation and disposal of excavated
materials from site as shown in drawings.

11.51 "Raised Zebra Crossing Ahead" sign plate, overall size no $419.20 CE12030
600mm x 1200mm, comprising of 2.03mm (14SWG)
thick aluminium base plate with diamond grade retro-
reflective sheetings with letterings and graphics on one
face and fixed to hot-dipped galvanised SHS post set in
and including precast concrete footing, excavation and
disposal of excavated materials from site as shown in
drawings.

"Pedestrian Alert" sign plate, overall size 450mm x

450mm comprising of 2.03mm (14SWG) thick
aluminium base plate with diamond grade retro-
reflective sheetings with letterings and graphics on
one face as shown in drawings:

11.52 Fixed to hot-dipped galvanised SHS post including no $147.50 CE12043

concrete foundation and excavation.

11.53 Fixed to 6mm thick aluminium sign holder secured to no $138.90 CE12057
lamp post by 19mm wide stainless steel band with
buckle.

230mm diameter fibre glass deviation bollard,

1000mm high above floor level complete with 300mm
high with diamond grade retro-reflective sheetings
directional sign and with foot of bollard bolted to and
including 205mm diameter x 6mm thick mild steel
pipe welded on to 300mm x 300mm x 5.4mm thick
mild steel base plate all as shown in drawings:

11.54 Deviation bollard on grass verge including all no $286.10 CE12005

necessary concrete foundation.

11.55 Deviation bollard on concrete footpath. no $286.10 CE12005

 Page 68 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

11.56 Hollow plastic reflector post, size 100mm x 120mm x no $58.90 CE12007
1130mm, consisting of high density polyethylene in white
colour with a black welded day-light marker and fitted
with two round reflectors with foot fixed to 4.5mm thick
hot-dipped galvanised hollow section and cast into
concrete as shown in drawings.

(c) Signboards

11.57 "DANGER-KEEP OUT" or other warning signboards no $40.00 Q021

consisting of 20mm thick timber board, complete with
painted background and wordings or signs by stencil
printing in colour in one or more languages of sizes
600mm x 900mm and above but less than 1.0 sqm
screwed to m.s. brackets and supported by 30mm sq
m.s. hollow section, elevated not less than 1.5m above
ground level, complete with a concrete footing of 300mm
x 300mm x 600mm depth as approved by the S.O.'s
representative.

11.58 Temporary sewer manhole sign comprising of 2.3mm (14 no $82.10 Q049
SWG) thick aluminium base plate with engineering grade
reflective sheet with graphics and letterings in red, white
and black on one face and bolted onto a 40mm diameter
galvanised steel pipe 2400mm long all as specified.

11.59 Temporary carpark sign plate size 900mm x 500mm no $97.70 CE12041
comprising of 2.3mm (14 SWG) thick aluminium base
plate with engineering grade reflective sheet with
graphics and letterings on one face and bolted onto a hot-
dipped galvanised post set in and including precast
concrete footing all as shown in drawings .

11.60 Project Signboard comprising of 12mm thick plywood no $951.30 O074

(2400mm x 1200mm) with enamel painted background
and letterings, mounted on 50.8mm x 50.8mm x 6.4mm
thick galvanised SHS frame with 25mm x 25mm x 2mm
galvanised SHS stiffeners fixed to 2nos 76.2mm x
76.2mm x 6.4mm thick galvanised SHS supports
(3075mm high from ground level) welded with 200mm x
200mm x 6mm thick mild steel base plate embedded in
400mm x 400mm x 600mm deep Grade 20 concrete
foundation including painting and excavation as specified
in drawings.

11.61 800mm diameter convex mirror, fixed to and supported no $286.90 CE12012
by 1 no 75mm diameter galvanised iron pipe and
embedded in 400 x 400 x 500mm deep Grade 25
concrete foundation and all necessary excavation.
 Page 69 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

12. GATES AND FENCING

(a) Gates

12.01 Double leaf gate consisting of 50mm diameter galvanised m² $71.40 N001
iron tubular framing filled in with 50mm x 50mm
weldmesh, 75mm diameter galvanised iron tubular gate
posts with bottom end encased in 450mm x 450mm x
600mm Grade 20 concrete foundation, the gates hung on
2 Nos. pairs approved hooks and ride hinges and fitted
with approved locking bolt including all necessary
welding and painting. (Nett area of leaf measured).

12.02 Standard metal collapsible gates of approved m² $160.90 N002

manufacture including all necessary fixing lugs, guide
rails, rollers and gate locks etc.

(b) Chain Link Fencing

3.175mm thick gauge x 50mm mesh PVC chain link

fencing of the following height to top of mesh with 3
Nos. horizontal lines of double strand 2.517mm BG
galvanised barbed wires of 2- ply 4 point above at
100 mm centres, the chain link and barbed wires
fixed to and including 50mm x 50mm x 6mm angle
iron posts at 3m centres with top bent to form spurs
and bottom cast into 300mm x 300mm x 450mm deep
Grade 20 concrete foundations including all
necessary straining wires and split pins and priming
and painting posts with two coats aluminium paint:

12.03 1.20m high. m $46.80 N003

12.04 1.50m high. m $51.90 N004

12.05 1.80m high. m $58.30 N005

12.06 2.10m high. m $72.30 N006

12.07 2.40m high. m $82.50 N007

(c) Temporary Fencing

12.08 Temporary fencing 1.20m high consisting of 6 Nos m $17.60 N009

longitudinal lines of galvanised double strand 2.517mm
BG barbed wire stapled 150mm and 225mm apart, as
shown in drawings and including 80mm diameter bakau
posts with pointed bottom and driven 450mm deep into
ground at 3.0m centres.
 Page 70 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

12.09 Temporary fencing 1.20m high consisting of 3 Nos m $10.70 N010

horizontal lines of galvanised doubled strand 2.517mm
BG barbed wire stapled 300mm apart to and including
100 mm diameter bintangore posts with pointed bottom
and driven 450mm deep into ground at 2.40m centres.

12.10 Temporary fencing 1.20m high consisting of 6 Nos m $17.10 N027

horizontal lines of galvanised doubled strand 2.517mm
BG barbed wire stapled 150mm apart to and including
100 mm diameter bintangore posts with pointed bottom
and driven 1.0m deep into ground at 2.50m centres.

12.11 Dismantling and removing chain link fencing 1.5m high m $16.90 N011
including breaking up of foundation etc.

12.12 Add to last item for each additional 300mm height. m $2.70 N012

12.13 20mm thick temporary wooden fence vertically spaced m $36.40 N013
alternately with 100mm x 100mm vertical standard at
2.5m centres to centres spaces with 2 Nos. of 100mm x
50mm horizontal guides to a height 1.500m, using sawn
timber with wood preservative.

13. SITE CLEARANCE, TURFING AND TREE-

PLANTING

(a) Site Clearance

13.01 To clear and cart away debris from site to approved ENV ton $99.20 L010
dumping ground.

13.02 Clearing and disposal of bush, belukar, holes and any m² $4.40 L011
other undergrowth etc from site including removing from
site and dumping at approved dumping ground.

Cut down trees with girth measured at a point 1.0m

above the ground, grub up roots and clear away from
site:

13.03 Not exceeding 0.5m girth. no $260.00 CE14001

13.04 Exceeding 0.5m but not exceeding 1.0m girth. no $322.80 L012

13.05 Exceeding 1.0m but not exceeding 1.5m girth. no $432.70 L013
 Page 71 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Cut down trees with girth measured at a point 1.0m

above the ground, grub up roots and clear away from
site (Cont'd):

13.06 Exceeding 1.5m but not exceeding 2.0m girth. no $648.00 L014

13.07 Exceeding 2.0m but not exceeding 2.5m girth. no $825.20 L015

13.08 Exceeding 2.5m but not exceeding 3.0m girth. no $1,080.40 L016

13.09 Exceeding 3.0m but not exceeding 4.0m girth. no $1,347.30 L017

13.10 Exceeding 4.0m but not exceeding 5.0m girth. no $1,703.40 L018

13.11 Exceeding 5.0m but not exceeding 6.0m girth. no $2,048.80 L019

(b) Turfing

13.12 Labour for trimming and forming embankments. m² $2.90 M002

13.13 225x225mm spot turfing (with 25mm thick original top m² $8.40 SM002A
soil) at 450mm centre both directions with a layer of
approved soil mixture 125mm thick including the
maintenance of the turfing works during the
"Maintenance Period" as specified.

13.14 Strip turfing (with 25mm thick original top soil) 450mm m² $12.10 SM004A
wide and spaced 600mm between strips at an angle of
45 degree on embankments with a layer of approved soil
mixture 125mm thick including the maintenance of the
turfing works during the "Maintenance Period" as
specified.

Close turfing (with 25mm thick original top soil)

including the maintenance of the turfing works
during the "Maintenance Period" as specified:

13.15 To slope embankment with a layer of 125mm thick m² $15.00 SM009A

approved soil mixture.

13.16 To flat level surfaces with a layer of 125mm thick m² $13.70 SM011
approved soil mixture.

13.17 To slope embankment with a layer of 225mm thick m² $16.70 CE14002

approved soil mixture.

13.18 To flat level surfaces with a layer of 225mm thick m² $15.40 CE14003
approved soil mixture.

13.19 Grass cutting at aeration slabs including weeding, sweep m² $0.30 M038
and remove cut grass off site. (Includes area occupied
by aeration slabs but exclude concrete lining).
 Page 72 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

13.20 Grass cutting including weeding on level ground or slope m² $0.20 M053
embankments, sweep and remove cut grass off site and
trimming edges at drain kerbs and roadsides, etc.

(c) Tree Pruning

Trimming of tree branches terminals and clearing of

cut branches, debris etc from site. (The height of tree
measured from tree base to the highest growing
point of tree before pruning):

13.21 Tree height not exceeding 2m. p/tree $8.30 CE14004

13.22 Tree height exceeding 2m but not exceeding 3m. p/tree $21.50 CE14005

13.23 Tree height exceeding 3m but not exceeding 6m. p/tree $60.90 CE14006

13.24 Tree height exceeding 6m but not exceeding 9m p/tree $82.10 CE14007
(truck mounted hydraulic platform measured
separately).

13.25 Tree height exceeding 9m but not exceeding 12m p/tree $122.60 CE14008
(truck mounted hydraulic platform measured
separately).

13.26 Tree height exceeding 12m but not exceeding 15m p/tree $188.70 CE14009
(truck mounted hydraulic platform measured
separately).

13.27 Tree height exceeding 15m (truck mounted hydraulic p/tree $253.80 CE14010
platform measured separately).

(d) Tree Planting

13.28 Excavate trench to form shrub/flower bed, including m³ $55.30 SM018A

backfilling to level about 250mm above the adjacent
ground level with approved soil mixture as specified
(plants measured separately).

Excavate tree hole including backfill to a level 250mm

above ground with approved soil mixture as
specified (tree measured separately):

13.29 1.50 x 1.50 x 1.00m deep. no $119.90 SM078

13.30 1.00 x 1.00 x 1.00m deep. no $53.30 SM077

13.31 0.50 x 0.50 x 0.50m deep. no $7.60 SM079

 Page 73 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Planting of instant tree including maintenance as

specified (tree measured separately):

13.32 Not exceeding 300mm girth. no $5.70 SM080

13.33 Exceeding 300mm but not exceeding 500mm girth. no $7.50 SM081

Planting of tree saplings/fruit trees/palms including

maintenance as specified (tree measured separately):

13.34 Large size with minimun height 2.00m. no $4.70 SM082

13.35 Medium size with minimun height 1.50m. no $3.80 SM083

13.36 Small size with minimun height 1.00m. no $2.80 SM084

13.37 Planting of shrubs of any size including maintenance as no $1.50 SM085

specified (shrub measured separately).

13.38 Approved good quality top soil (From contractor's own m³ $28.80 Q016
source).

13.39 Tree guard with minimum 50mm diameter Bintangore no $24.60 SM041
poles tied together with galvanised wire bracing as
shown in drawings.

Approved green plastic netting surrounding all the

sides of tree guard to a height of 200mm above the
ground:

13.40 Single layer. m2 $1.70 SM043

13.41 Double layer. m2 $3.30 SM044

13.42 Loamy soil to planting strip as shown in drawings. m³ $45.40 Q018

13.43 Trough of uniform 20mm aggregate wrapped with m³ $54.70 Q019

synthetic fabric membrane all round as shown in
drawings.

13.44 100mm diameter x 650mm long UPVC perforated pipe to no $12.70 Q020
SS141 with PVC perforated cover and galvanised steel
clearing plate as shown in drawings.
 Page 74 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

14. REPAIR WORKS SECTION

(a) Break-up and replacement

Break up and remove from site existing surface

obstruction consisting of the following materials:

14.01 Bituminous surfacing including granite sub-base. m³ $64.40 J065

14.02 Reinforced concrete. m³ $174.30 J066

14.03 Mass concrete. m³ $141.00 J067

14.04 Brickwork and blockwork. m³ $93.80 J068

14.05 Scarify existing road surfacing 75mm deep and remove m² $8.70 J047
all scarified materials and brush clean road base to
receive new surfacing.

14.06 Cutting of concrete slab/bituminous premix pavement m $5.50 CE15009

with diamond cutter to a depth not exceeding 25mm.

14.07 Cutting of concrete slab/bituminous premix pavement m $4.40 CE15010

with diamond cutter to each additional depth of 25mm

Cold mill existing road surfacing and remove all

milled materials and brush clean road base to receive
new surfacing:

14.08 Not exceeding 25mm deep. m² $5.00 J069

14.09 Exceeding 25mm but not exceeding 50mm deep. m² $6.10 J063

14.10 Exceeding 50mm but not exceeding 75mm deep. m² $8.00 J064

14.11 Break up existing roadside kerb size 125mm x 300mm m $27.70 A011
including concrete foundation and remove debris from
site.

14.12 Add to (or deduct) from last item for each size over or m $5.30 A012
below 0.01 m2 cross sectional area of kerb.

14.13 Take out precast concrete paving / revetment slabs m² $11.50 J012
(thickness not exceeding 200mm) and stack up for re-
use.

14.14 Select from stack and lay precast concrete m² $10.90 J013
paving/revetment slabs (thickness not exceeding
200mm) including the provision of 50mm bed of granite
dust or unwashed sand.

14.15 Take up precast concrete paving slabs (thickness not m² $19.50 A009
exceeding 200mm) to footpaths and replace on
completion including laying a layer of 50mm sand bed.
 Page 75 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

14.16 Take out precast aeration / perforated interlocking m² $12.20 K021

concrete turf paving slabs (thickness not exceeding
200mm) including removal of earth and turf and stack up
for re-use.

14.17 Take out precast aeration / perforated interlocking m² $5.50 CE15028

concrete turf paving slabs (thickness not exceeding
200mm) including removal of earth and turf and cart
away from site.

14.18 Select from stack and lay precast aeration / perforated m² $28.20 K022
interlocking concrete turf paving slabs (thickness not
exceeding 200mm) including 40mm thick bed of granite
fines and filling all voids with approved soil mixture and
turf.

14.19 Take out interlocking concrete paving blocks (thickness m² $6.90 CE15029
not exceeding 200mm) and cart away materials from site.

14.20 Removal of encrusted top soil and earth (average m² $10.40 K023
thickness not exceeding 200mm) from slots and gaps
between aeration slabs and replace with approved soil
mixture and turf (measured as area of aeration slabs).

14.21 Take up concrete revetment slabs (thickness not m $36.20 A010

exceeding 200mm) and inverts to surface water drains
and reinstating to the satisfaction of the S.O.'s
representative on completion. Allow for dealing with all
water in the drains by pumping or by diversion.

14.22 Take out precast concrete composite drain channel (size m $16.20 J014
not exceeding 500mm wide) and stack up for re-use.

14.23 Select from stack and lay precast concrete composite m $18.10 J015
drain channel (size not exceeding 500mm wide) including
jointing in cement mortar (1:3).

(b) Refixing handrailings

Materials and labour for re-fixing of handrailing (2

rows) including foundation, cutting of pipes etc and 3
coats of approved paint (Rate excludes cost of
handrailing).

14.24 40mm diameter handrailing. m $28.80 M048

14.25 50mm diameter handrailing. m $29.50 M025

14.26 65mm diameter handrailing. m $30.40 M049

 Page 76 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(c) Erasing road line and markings

Erase off existing road lines and markings in the cold

state with a road line erasing machine including
sweeping all shavings off the road:

14.27 100mm wide line. m $3.50 O039

14.28 Single 100mm wide zig-zag line (measured straight m $1.40 CE15033
along the edge of road/kerb).

14.29 Double 100mm wide zig-zag line (measured straight m $2.80 CE15034
along the edge of road/kerb).

14.30 150mm wide line. m $5.00 O040

14.31 200mm wide line. m $8.70 O041

14.32 300mm wide line. m $14.10 O042

14.33 455mm wide line. m $21.70 CE15035

14.34 Single traffic arrow / Merging arrow. no $87.40 O043

14.35 Double traffic arrow. no $102.00 O044

14.36 Triple traffic arrow. no $120.80 O045

14.37 Standard letterings/markings 2520mm height. no $72.80 CE15030

14.38 Standard letterings/markings 1000mm height. no $23.80 CE15053

14.39 Standard letterings/markings 310mm height. no $16.10 CE15031

14.40 Standard numerals 180mm height. no $9.60 CE15032

14.41 Pedestrian crossings and other road markings m² $38.30 O048

exceeding 455mm wide.
 Page 77 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

15. DAYWORKS

Provide the undermentioned labour and Construction

Equipment (operator and fuel included) and materials
as may be ordered in writing by the S.O.'s
Representative.

(a) Labour(excluding profit & overhead)

15.01 Bricklayer. hr $16.20 SN001

15.02 Carpenter. hr $18.20 SN003

15.03 Concretor. hr $17.10 SN004

15.04 Drainlayer. hr $16.70 SN006

15.05 Fitter. hr $19.50 SN008

15.06 Labourer. hr $11.70 SN012

15.07 Mason. hr $16.20 SN014

15.08 Painter. hr $16.00 SN016

15.09 Pavior. hr $16.50 SN017

15.10 Roller Driver. hr $23.40 SN022

15.11 Steel Bender & Fixer. hr $17.20 SN025

15.12 Watchman. hr $14.50 SN029

15.13 Welder. hr $15.40 SN030

 Page 78 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(b) Construction equipment (excluding profit &

overhead)

15.14 Air blower - 300mm diameter, 230V complete with 5m hr $84.50 SN082
duct (including generator and multi-gas monitor).

15.15 Air compressor with air deliver of 4.5 cu m/ per minute hr $29.90 SN032
and working pressure of 7 kg/cm2 including pneumatic
tools, fuel and tool sharpening (no labour).

15.16 Concrete mixer - 200/140 litres capacity including fuel. hr $18.90 SN033

15.17 Concrete mixer - 300/200 litres capacity including fuel. hr $27.70 SN034

15.18 Crane (25 tonne lifting capacity) including fuel and driver. hr $142.90 SN050

15.19 Crawler excavator with back hoe or dragline 0.85 m3 hr $123.00 SN063
bucket including fuel and driver.

15.20 Crawler mounted crane 25 tonne lifting capacity including hr $129.00 SN079
fuel and driver.

15.21 Diamond cutter including fuel and driver. hr $28.50 SN061

15.22 Diesel dumper not exceeding 0.75 cu m capacity hr $39.60 SN058

including fuel and driver.

15.23 Diesel powered field welding machine with minimum hr $18.60 SN036
capacity 300 amp.

15.24 Lorry crane (up to 3 tonne) including fuel and driver. hr $52.80 SN067

15.25 Lorry crane (5.5 to 7 tonne) including fuel and driver. hr $70.20 SN068

15.26 Lorry crane (up to 10 tonne) including fuel and driver. hr $98.60 SN069

15.27 Mechanical rammer with impact force not exceeding hr $24.40 SN080
4000 kg per blow.

15.28 Mechanical road sweeper with a minimum rating of 44 hp hr $107.80 SN060

including fuel and driver.
 Page 79 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

15.29 Mini-backhoe excavator (not exceeding 0.2 cu m) hr $50.50 SN062

including fuel and driver.

15.30 Motor crane (5 ton lifting capacity) including fuel and hr $72.50 SN078
driver.

15.31 Motor crane (8 - 13 tonne lifting capacity) including fuel hr $91.60 SN051
and driver.

15.32 Motor grader - 3650mm blade (101 kw range) including hr $108.30 SN070
fuel and driver.

15.33 Motor grader - 4270mm blade (134 kw range) including hr $116.40 SN071
fuel and driver.

15.34 Motor grader - 4880mm blade (186 kw range) including hr $134.70 SN072
fuel and driver.

15.35 Motor lorry (pick-up) 1.50 tonne size including fuel and hr $33.10 SN053
driver.

15.36 Motor lorry 2.5 - 3 tonne size including fuel and driver. hr $36.40 SN039

15.37 Motor lorry or Tipper 5.5 - 7.0 tonne size including fuel hr $58.80 SN040
and driver.

15.38 Motor lorry or Tipper 10 tonne size including fuel and hr $70.10 SN052
driver.

15.39 Oxy-acetylene cutter including welder. hr $58.00 SN081

15.40 Power driven pump - 50mm size including fuel. hr $26.10 SN041

15.41 Power driven pump - 75mm size including fuel. hr $33.10 SN042

15.42 Power driven pump - 100mm size including fuel. hr $33.60 SN054

15.43 Power driven pump - 150mm size including fuel. hr $36.50 SN055

15.44 Power wheel loader of 1.5 cu m bucket capcity including hr $98.50 SN065
fuel and driver. Flywheel horsepower 100HP (range).

15.45 Ditto but exceeding 1.5 cu m bucket capacity but not hr $104.30 SN066
exceeding 2.5 cu m capacity including ditto. Flywheel
horsepower 130HP (range).

15.46 Road roller 8 to 10 tonne capacity including fuel and hr $50.90 SN045
driver.

15.47 Road roller vibrating 10 to 20 tonne capacity including hr $52.00 SN083

fuel and driver.

15.48 Tandem roller 1 tonne capacity including fuel and driver. hr $24.40 SN059
 Page 80 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

15.49 To provide collision attenuator or truck mounted Per day $450.00 SN084
attenuator (TMA) attached/fitted/mounted onto an
appropriate shadow vehicle complete with signboards,
blinkers, lights, cones, etc and all necessary equipment
for traffic control and road safety all in accordance with
LTA's Code of Practice on Temporary Traffic Control.
(Rate is only applicable by way of works instruction or
works order given by SO Rep).

15.50 Track type tractors as bulldozer or ripper Flywheel hr $106.20 SN073

Horsepower (67 kw range) including fuel and driver.

15.51 Track type tractors as bulldozer or ripper Flywheel hr $123.70 SN074

Horsepower (104 kw range) including fuel and driver.

15.52 Track type tractors as bulldozer or ripper Flywheel hr $134.70 SN075

Horsepower (149 kw range) including fuel and driver.

15.53 Track type tractors as bulldozer or ripper Flywheel hr $202.10 SN076

Horsepower (224 kw range) including fuel and driver.

15.54 Track type tractors as bulldozer or ripper Flywheel hr $217.40 SN077

Horsepower (306 kw range) including fuel and driver.

15.55 Traxacavator - 1.0 cu m bucket capacity range including hr $102.60 SN046

fuel and driver.

15.56 Traxacavator - 1.5 cu m bucket capacity range including hr $110.60 SN047

fuel and driver.

15.57 Traxacavator - 2.0 cu m bucket capacity range including hr $136.60 SN048

fuel and driver.

15.58 Traxacavator - 3.6 cu m bucket capacity range including hr $170.90 SN064

fuel and driver.

15.59 Wheel or crawler shovel or excavator loaders with back hr $97.60 SN049
hoe bucket not exceeding 0.4 cu m or 1.30 cu m loader
buckets capacity including fuel and driver.
 Page 81 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

16. LTA ROAD WORKS SECTION

(a) Directional Signs

Street name signs on vertical post/traffic light

post/lamp post comprising of high micro prismatic
reflective sheeting, aluminium box, intrusion
members and cappings to LTA's Standard.
(Supports, holders, brackets measured separately)

16.01 230mm high single-sided. m $457.00

16.02 230mm high double-sided. m $427.00

16.03 280mm high single-sided. m $505.00

16.04 280mm high double-sided. m $467.00

16.05 Vertical aluminium support post assembly with cappings no $275.00

(length varies from 3300mm to 3500mm) in accordance
with LTA's Standard.

16.06 Cast aluminium base plate and cappings complete with 4 no $145.00
nos. built-in expansion stainless steel bolts M12 x
100mm and levelling the pavement surface with non
shrink grout if it is installed on sloping ground in
accordance with LTA's Standard.

16.07 Aluminium brackets and stainless steel M8 bolts and lock pair $51.00
nuts to cantilever street name on vertical support post as
in accordance with LTA's Standard.

Single-face directional signs comprising aluminium

sheeting 14SWG laminated with approved reflective
sheeting including all the required size of letters,
numbers, logo(s) and all necessary backings,
welding and other types of connections to LTA's
Standard. (Supports to be measured separately).

16.08 Micro Prismatic Reflective Grade (Type IX). m² $703.00

Supports including foundation, excavation and

disposal to LTA's Standard.

16.09 75mm diameter cantilever supports (Type A). no $418.00

16.10 A pair of 100 x 100 x 6mm SHS supports (Type B). no $1,990.70

16.11 A pair of 120 x 120 x 8mm SHS supports (Type C). no $3,104.90

16.12 A pair of 150 x 150 x 6mm SHS supports (Type D). no $3,378.80
 Page 82 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Single-faced silk screen traffic signs as regulatory

signs, warning signs and informative signs
comprising 2mm thick aluminium sheets, approved
Micro Prismatic Grade reflective sheetings including
appropriate diagrams, alphabets and numerals to
LTA's Standard. (Supports to be measured
separately)

16.13 600 x 450mm. no $139.20

16.14 600 x 600mm. no $170.20

16.15 900 x 900mm. no $259.50

16.16 Other sizes. m² $596.60

16.17 50 x 50 x 2.3mm thick galvanised square hollow section no $85.00

vertical supports of traffic signs to all details as LTA
Standard including excavation, if any, and disposal of
excavated materials from site, fixing and fastening of
maximum three traffic signs on any one face per support,
using 400 x 400 x 400mm concrete foundation with built
in expansion bolts.

(b) Bus Shelter

16.18 Fibre glass Type A bus shelter (3000mm long unit) unit $2,000.00
including foundation, floor slab with granolithic finishes
(exclude safety bollard) to LTA's Standard.

16.19 Remove damaged roof cover and replace with new fibre unit $566.00
glass cover for Type A bus shelter to LTA's Standard
(3000mm long unit).

Remove damaged seat of Type A fibre glass bus

shelter and replace with new seat including making
good the surrounding to match with existing
conditions to LTA's Standard (3 nos. per unit).

16.21 Include seats, plates, post and concrete foundation. unit $259.90

16.22 Exclude plates, post and concrete foundation. unit $98.20

16.23 Demolish and remove Type A fibre glass bus shelter unit $352.30
including making good the surrounding to match with
existing conditions to LTA's Standard.

16.24 Tempered glass back panel 1500 x 2150mm high no $3,825.40

complete with notice panel including supports and
accessories.
 Page 83 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(c) Safety Bollards

16.25 Safety bollards with reinforced concrete foundation no $820.70

including excavation, fixing reinforcements, welding,
concreting, curing, painting, reflective sheeting to LTA's
Standard for 70 kph roads.

16.26 Safety bollards with reinforced concrete foundation no $761.90

including excavation, fixing reinforcements, welding,
concreting, curing, painting, reflective sheeting to LTA's
Standard for 60 kph roads.

16.27 Safety bollards including hacking, drilling, injecting resin, no $750.80

inserting bolts, welding, painting, reflective sheeting and
reinstatement works to LTA's Standard for 70 kph roads.

16.28 Safety bollards including hacking, drilling, injecting resin, no $589.60

inserting bolts, welding, painting, reflective sheeting and
reinstatement works to LTA's Standard for 60 kph roads.

16.29 Micro prismatic reflective sheeting to steel bollard no $120.80

including removal of exisitng damaged reflective
sheeting.

(d) Road Markings

1.5mm thick thermoplastic paint on road pavement to

LTA's Standard.

16.30 100mm wide line. m $2.60

16.31 150mm wide line. m $3.40

16.32 200mm wide line. m $5.10

16.33 300mm wide line. m $6.20

16.34 exceeding 300mm wide line. m² $36.00

 Page 84 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

3.0mm thick thermoplastic paint on road pavement to

LTA's Standard.

16.35 200mm wide line. m $8.20

16.36 300mm wide line. m $11.40

16.37 400mm wide line. m $14.40

16.38 450mm wide line. m $15.00

16.39 exceeding 455mm wide line. m² $77.20

16.40 go-straight arrow. no $126.50

16.41 go-straight with right/left turn arrow. no $149.20

16.42 right/left turn arrow. no $136.40

16.43 merge arrow. no $136.40

16.44 triple-head arrow no $226.10

16.45 Erase existing thermoplastic road lines and markings m² $21.00

including clearing all shavings and making good.

(e) Vehicular Impact Guardrail

Hot dip galvanised vehicular impact guardrail fixed to

steel channel post (post and support measured
separately) including bolt and nut to LTA's Standard.

16.46 W-Beam 311 x 83 x 3mm. mm $100.10

16.47 Turned-down anchorage Type A – (4.05m long) with no $686.60

No
post and concrete.

Post and spacer block with galvanised bolt and nut

including concrete foundation, all necessary
excavation, and disposal of excavated material to
LTA's Standard.

16.48 150 x 110 x 18 x 4.3mm hot dip galvanised channel no $150.50

post cast in concrete foundation.

16.49 150 x 110 x 18 x 4.3mm hot dip galvanised channel no $277.90

post mounted on concrete structure including slip
base plate.

16.50 150 x 150 x 6mm SHS hot dip galvanised brace support no $453.40
(on one side) including post, spacer, brace with mild
steel plates welded, set in and including concrete
foundation, all necessary excavation, disposal of
excavated material to LTA's Standard.
 Page 85 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Design, supply and install end terminal complete with

end terminal, post, support, foundation, cable-anchor
assembly, W-beam and all necessary fixings to LTA's
Standard.

16.51 Type B - 10.1m long cable anchored terminal. Set

no $11,143.10

16.52 Thrie-Beam Transition consisting of thrie-beam no $6,611.10

Set
transition section, thrie-beam and end piece.

16.53 Design, supply and install crash cushion in compliance no $46,161.00

with NCHRP 350 Test complete with end terminal, post,
support, foundation, W-beam and all necessary fixings to
LTA's Standard.

(f) Gratings

16.54 Mild steel grating in panels consisting of 80 x 38 x 4.6mm m² $413.40

galvanised steel angle frame, with 35 x 9mm galvanised
mild steel flat all round, in filled with 25 x 5mm
galvanised mild steel flat, all joints and intersections
whole welded, drilled and including painting with one
coat of inhibitive primer before delivery and built into
concrete surround including 3mm thick galvanised
chequer plate cover to LTA's Standard. (Pedestrian
grating)

16.55 Mild steel grating in panels consisting of 100 x 75 x m² $1,284.40

9.4mm thick galvanised angle frame with 65 x 9mm fish-
tailed mild steel flat welded at 30mm centres and infilled
with 12mm diameter mild steel bars at 85mm centres, all
joints and intersections whole welded, drilled and
including painting with one coat of inhibitive primer
before delivery, built into concrete surround to LTA's
Standard. (Vehicular grating for drain)

16.56 Mild steel grating in panels consisting of 100 x 100 x m² $1,256.60

10mm thick galvanised mild steel angle frame with fish-
tail mild steel flat welded and infilled with 25 x 6 mild
steel flat at 30mm centres and 90 x 22mm mild steel flat
at 85mm centres. The complete assembly except fishtails
are to be hot-dipped galvanised. All the flats and angles
are to be fillet welded throughout and drilled before
delivery, built into concrete surround to LTA's Standard.
(Manhole grating)
 Page 86 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

(g) Pipe Culverts

Precast concrete pipe culverts Class 'L' complying

with SS 183 butt jointed with cement and sand (1:1)
mortar.

16.57 300mm diameter. m $81.70

16.58 450mm diameter. m $120.00

16.59 600mm diameter. m $175.50

16.60 750mm diameter. m $268.90

16.61 900mm diameter. m $352.90

16.62 1050mm diameter. m $406.10

16.63 1200mm diameter. m $487.90

16.64 1350mm diameter. m $552.60

16.65 1500mm diameter. m $692.70

(i) Others

16.66 Road base course using Recycled Concrete Aggregrate m³ $50.00

(maximum size 50mm & below), deposited, spread,
levelled, rolled and mechanically consolidated true to
level and camber.

16.67 Grade 25 precast concrete foundation 500 x 500 x no $101.10

600mm including breaking and excavation for foundation
to LTA's Standard.

16.68 Single-faced raised reflected pavement markers (yellow no $23.30

or red markers) to LTA's Standard.

16.69 Double-faced raised reflected pavement markers (yellow no $26.50

or red markers) to LTA's Standard.

16.70 300 x 300 x 17mm thick (include protrusion) m² $130.00

homogenous tactile tile at footpath/ramp to LTA's
Standard.

16.71 Mobilisation and demobilisation of Electronic Variable no $260.40

Message Sign (VMS).

16.72 Electronic Variable Message (full matrix) Sign (VMS) of per day $115.50
size 2500 x 1800mm (minimum) including programming
of messages and relocation within the site as directed.
 Page 87 of 87

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR CIVIL ENGINEERING WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE ($) CODE

Aluminium alloy railing in powder coating finish

consisting of tubular or square hollow section set in
and including concrete foundation, all necessary
excavation and disposal of excavated material from
site to LTA's Standard.

16.73 Type E. m $120.00

16.74 Type F. m $120.00

16.75 Coloured high strength fibre reinforced polymer cement m² $27.30

coating including all necessary equipment for the
cleaning, grinding and vacuuming of concrete surface
and remove any contaminants.

Pipe crossing for street lighting complete with pilot

fish wire including excavation for concrete
foundation, disposal of excavated materials from
site. (concrete foundation and long bend shall be
measured separately).

16.76 75mm diameter medium duty galvanised iron pipe. m $40.70

16.77 75mm diameter heavy duty galvanised iron pipe. m $46.20

16.78 75mm diameter Class AW heavy duty PVC pipe. m $15.70

16.79 75mm diameter Class B heavy duty PVC pipe. m $11.20

16.80 100mm diameter medium duty galvanised iron pipe. m $54.20

16.81 100mm diameter heavy duty galvanised iron pipe. m $59.50

16.82 100mm diameter Class AW heavy duty PVC pipe. m $23.40

16.83 100mm diameter Class B heavy duty PVC pipe. m $12.00

STANDARD SCHEDULE OF RATES

FOR

ELECTRICAL WORKS

(JUL 2020 EDITION)

 Page 1 of 45

GENERAL PREAMBLES

1 Introduction

1.1 The clauses in the General Preambles shall apply to all work items
contained in the Standard Schedule of Rates.

1.2 All rates include the allowances for complying with the General
Preambles.

2 All rates contained in the Standard Schedule of Rates are fixed basic
rates (in Singapore Currency) and no amendment whatsoever shall be
made to such rates. The tenderers shall be deemed to have closely
studied all rates contained herein and duly noted their implications.

3 All rates contained in the Standard Schedule of Rates are exclusive of

any Goods and Services Tax. Any such Goods and Services Tax shall
be borne by the HDB as and when the same becomes due and
payable.

4 All work, materials and goods described in this Standard Schedule of

Rates shall be of the respective kinds described in the Contract and in
accordance with the instructions of the Superintending Officer or the
Superintending Officer's Representative.

5 Headings to groups of items shall be read as part of the descriptions of

the items to which the headings apply.

6 Where brand/trade names are given in the descriptions, they are solely
intended for fixing the rates of the items. The products and materials to
be used in the contract shall be governed by the specifications,
drawings and other documents forming the contract (and not this
Schedule of Rates).

7 Description of Works and Inclusions

Unless specifically stated otherwise, the following shall be deemed to

be included in the description of the item of work:-

a) Labour and all costs in connection therewith including the labour

in fabricating, assembling, setting, fitting and fixing of materials
and goods in position.

b) Materials and goods including materials required for lapping,

jointing and the like and all costs in connection therewith such
as conveyance, delivery, unloading, storing, returning of
packings, handling, hoisting and lowering.
 Page 2 of 45

GENERAL PREAMBLES

7 Description of Works and Inclusions (Cont'd)

c) Preparing surfaces to receive work.

d) Protecting materials and work.

e) Waste of materials.

f) All cutting and waste.

g) Use of construction equipment, tools, vehicles and all costs in

connection therewith.

h) Cleaning up on completion and making good all work disturbed.

i) General requirements set out in the Specifications, Drawings

and other documents forming the Contract.

j) Establishment charges, overhead and profit.

8 The description of each item of work shall be deemed to include all

screws, nails, bolts, nuts, nipples, fixing or supporting clips, saddles,
brackets, straps, rivets, plugs and the like and all incidental
accessories, chases, holes, mortises, cutting away plugging and
making good of walls, ceilings and other structural features where
necessary.

9 All metal conduits shall be deemed to include socket joints.

10 Unless otherwise stated, all work shall be measured nett as fixed in its
place.

11 Unless otherwise stated, pipes are described by their internal

diameters.

12 Where minimum deductions of voids are dealt with in this document

they shall refer only to openings or voids which are within the
boundaries of measured area. Openings or voids which are at the
boundaries of area shall always be the subject of deductions
irrespective of size.

13 Billing of Quantities

13.1 Where the unit of measurement is the linear metre, square metre and
cubic metre, quantities shall be billed to the nearest whole unit.
Fractions of the unit less than half shall be disregarded and all other
fractions shall be regarded as a whole unit.
 Page 3 of 45

GENERAL PREAMBLES

13 Billing of Quantities (Cont'd)

13.2 Where the unit of measurement is the kilogramme, quantities shall be

billed to the nearest whole unit. Fractions of a unit less than half shall
be disregarded and all other fractions shall be regarded as a whole
unit. Where the unit of billing is the tonne or litre, quantities shall be
billed to the nearest two places of decimals.

13.3 Where the unit of measurement is the hour, fractions of the unit shall
be billed to the nearest next half hour.

13.4 Where the application of clauses 13.1 and 13.2 would cause an entire
item to be eliminated, such item shall be billed to the nearest two
places of decimals.

14 Where rates with descriptions pertain to the same purpose are listed in
more than one Standard Schedule of Rates incorporated in the
Contract; the rate as listed in the following schedules (in the stated
order of precedence) shall prevail:-

1st Precedence Standard Schedule of Rates for Building

Works

2nd Precedence Standard Schedule of Rates for Civil

Engineering Works

3rd Precedence Standard Schedule of Rates for Electrical

Works

15 Unless otherwise stated, the term "as specified" means as specified in

any of the documents forming part of the Contract.

16 The following abbreviations are used for the units:-

m - Linear metre
m2 - Square metre
m3 - Cubic metre
no - Number
kg - Kilogram
ton - Tonne
pr - Pair
sht - Sheet
ltr - Litre
hr - Hour
 Page 4 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

ELECTRICAL INSTALLATION

A POINT WIRING

Wiring In PVC Trunking

Surface wiring in 2x1.5mm² PVC cable and 1.5mm²

earth cable in PVC trunking including accessories but
excluding fittings, fan regulators and fans:

1 One lighting or fan point controlled by one switch no $68.20 SZ001

(to a distance not exceeding 12m).

2 Each additional point to item SZ001 (to a distance no $30.60 SZ002

not exceeding 5m).

3 Each additional point to item SZ001 (to a distance no $50.10 SZ003

exceeding 5m but not exceeding 10m).

4 One lighting point controlled by two 2-way switches no $86.90 SZ004

(to a distance not exceeding 12m).

Surface wiring in 2x1.5mm² PVC/PVC cable and

1.5mm² earth cable in PVC trunking including
accessories but excluding light fittings, fan regulators
and fans:

5 One lighting or fan point controlled by one switch (to no $73.50 SZ005
a distance not exceeding 12m).

6 Each additional point to item SZ005 (to a distance no $32.80 SZ006

not exceeding 5m).

7 Each additional point to item SZ005 (to a distance no $54.60 SZ007

exceeding 5m but not exceeding 10m).

8 One lighting point controlled by two 2-way switches no $94.10 SZ008

(to a distance not exceeding 12m).

Wiring in Metal Conduit

Surface wiring in 2x1.5mm² PVC cable and 1.5mm²

earth cable in 20mm diameter metal conduit including
accessories but excluding light fittings, fan regulators
and fans:

9 One lighting or fan point controlled by one switch (to no $120.90 SZ009
a distance not exceeding 12m).
 Page 5 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

A POINT WIRING (CONT'D)

Wiring in Metal Conduit (Cont'd)

Surface wiring in 2x1.5mm² PVC cable and 1.5mm²

earth cable in 20mm diameter metal conduit including
accessories but excluding light fittings, fan regulators
and fans (Cont'd):

10 Each additional point to item SZ009 (to a distance no $48.60 SZ010

not exceeding 5m).

11 Each additional point to item SZ009 (to a distance no $92.40 SZ011

exceeding 5m but not exceeding 10m).

12 One lighting point controlled by two 2-way switches no $144.20 SZ012

(to a distance not exceeding 12m).

Surface wiring in 2x1.5mm² PVC/PVC cable and

1.5mm² earth cable in 20mm metal conduit including
accessories but excluding light fittings, fan regulators
and fans:

13 One lighting or fan point controlled by one switch (to no $126.30 SZ013
a distance not exceeding 12m).

14 Each additional point to item SZ013 (to a distance no $53.90 SZ014

not exceeding 5m).

15 Each additional point to item SZ013 (to a distance no $96.90 SZ015

exceeding 5m but not exceeding 10m).

16 One lighting point controlled by two 2-way switches no $151.30 SZ016

(to a distance not exceeding 12m).

Concealed Wiring In PVC Pipe Conduit

Concealed wiring in 2x1.5mm² PVC cable and 1.5mm²

earth cable, drawn through and including 20mm
diameter PVC pipes cast/embedded in slab/wall
complete with all necessary tees, connectors, outlet
junction box and accessories but excluding fittings,
fan regulators and fan:

17 One lighting or fan point controlled by one switch no $69.90 SZ909

(to a distance not exceeding 12m).
 Page 6 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

A POINT WIRING (CONT'D)

Concealed Wiring In PVC Pipe Conduit

Concealed wiring in 2x1.5mm² PVC cable and 1.5mm²

earth cable, drawn through and including 20mm
diameter PVC pipes cast/embedded in slab/wall
complete with all necessary tees, connectors, outlet
junction box and accessories but excluding fittings,
fan regulators and fan (Cont'd):

18 Each additional point to item SZ909 (to a distance no $29.80 SZ910

not exceeding 5m).

19 Each additional point to item SZ909 (to a distance no $50.40 SZ911

exceeding 5m but not exceeding 10m).

20 One lighting point controlled by two 2-way switches no $92.80 SZ912

(to a distance not exceeding 12m).

Concealed wiring in 2x1.5mm² PVC cable and 1.5mm²

earth cable, drawn through and including 25mm
diameter PVC pipes cast/embedded in slab/wall
complete with all necessary tees, connectors, outlet
junction box and accessories but excluding fittings,
fan regulators and fan:

21 One lighting or fan point controlled by one switch no $72.40 SZ913

(to a distance not exceeding 12m).

22 Each additional point to item SZ913 (to a distance no $30.80 SZ914

not exceeding 5m).

23 Each additional point to item SZ913 (to a distance no $52.50 SZ915

exceeding 5m but not exceeding 10m).

24 One lighting point controlled by two 2-way switches no $96.90 SZ916

(to a distance not exceeding 12m).

25 Bell point complete with concealed wiring in 2x1.5mm2 no $70.50 SZ960

PVC cable and 1.5mm2 PVC earth cable drawn through
and including 20mm diameter PVC pipes embedded in
slab/wall complete with all necessary tees, connectors,
outlet junction and accessories but excluding bell (to a
distance not exceeding 12m).
 Page 7 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

B POWER/HEATER POINT

Wiring In PVC Trunking

13 amp 1-gang white switch socket-outlet complete

with mounting box in 60x20mm PVC multi-
compartment trunking including accessories:

26 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² no $78.70 SZ017

earth cable (to a distance not exceeding 12m).

27 Each additional point to item SZ017 (to a distance no $39.40 SZ310

not exceeding 5m).

28 Each additional point to item SZ017 (to a distance no $63.50 SZ311

exceeding 5m but not exceeding 10m).

29 Surface wiring in 2x2.5mm² PVC/PVC cable and no $84.00 SZ018

2.5mm² earth cable (to a distance not exceeding
12m).

30 Each additional point to item SZ018 (to a distance no $41.60 SZ312

not exceeding 5m).

31 Each additional point to item SZ018 (to a distance no $68.00 SZ313

exceeding 5m but not exceeding 10m).

13 amp 2-gang white switch socket-outlet complete

with mounting box in 60x20mm PVC multi-
compartment trunking including accessories:

32 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² no $83.80 SZ470

earth cable (to a distance not exceeding 12m).

33 Each additional point to item SZ470 (to a distance no $44.50 SZ471

not exceeding 5m).

34 Each additional point to item SZ470 (to a distance no $68.60 SZ472

exceeding 5m but not exceeding 10m).

35 Surface wiring in 2x2.5mm² PVC/PVC cable and no $89.10 SZ473

2.5mm² earth cable (to a distance not exceeding
12m).
 Page 8 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

B POWER/HEATER POINT (CONT'D)

Wiring In PVC Trunking (Cont'd)

13 amp 2-gang white switch socket-outlet complete

with mounting box in 60x20mm PVC multi-
compartment trunking including accessories (Cont'd):

36 Each additional point to item SZ473 (to a distance no $46.70 SZ474

not exceeding 5m).

37 Each additional point to item SZ473 (to a distance no $73.10 SZ475

exceeding 5m but not exceeding 10m).

15 amp switch socket-outlet complete with mounting

box in 60x20mm PVC multi-compartment trunking
including accessories (to a distance not exceeding
12m):

38 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² no $89.10 SZ021

PVC earth cable.

39 Surface wiring in 2x2.5mm² PVC/PVC cable and no $94.50 SZ022

2.5mm² PVC earth cable.

Wiring in Metal Conduit

13 amp 1-gang metal-clad switch socket-outlet

complete with mounting box in 20mm diameter metal
conduit including socket joints and other accessories:

40 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² no $125.60 SZ019

earth cable (to a distance not exceeding 12m).

41 Each additional point to item SZ019 (to a distance no $61.30 SZ314

not exceeding 5m).

42 Each additional point to item SZ019 (to a distance no $106.90 SZ315

exceeding 5m but not exceeding 10m).

43 Surface wiring in 2x2.5mm² PVC/PVC cable and no $131.00 SZ020

2.5mm² earth cable (to a distance not exceeding
12m).
 Page 9 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

B POWER/HEATER POINT (CONT'D)

Wiring in Metal Conduit (Cont'd)

13 amp 1-gang metal-clad switch socket-outlet

complete with mounting box in 20mm diameter metal
conduit including socket joints and other accessories
(Cont'd):

44 Each additional point to item SZ020 (to a distance no $63.50 SZ316

not exceeding 5m).

45 Each additional point to item SZ020 (to a distance no $111.40 SZ317

exceeding 5m but not exceeding 10m).

13 amp 2-gang metal-clad switch socket-outlet

complete with mounting box in 20mm diameter metal
conduit including socket joints and other accessories:

46 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² no $172.00 SZ476

earth cable (to a distance not exceeding 12m).

47 Each additional point to item SZ476 (to a distance no $84.80 SZ477

not exceeding 5m).

48 Each additional point to item SZ476 (to a distance no $146.80 SZ478

exceeding 5m but not exceeding 10m).

49 Surface wiring in 2x2.5mm² PVC/PVC cable and no $177.30 SZ479

2.5mm² earth cable (to a distance not exceeding
12m).

50 Each additional point to item SZ479 (to a distance no $87.00 SZ480

not exceeding 5m).

51 Each additional point to item SZ479 (to a distance no $151.20 SZ481

exceeding 5m but not exceeding 10m).

15 amp metal-clad switch socket-outlet complete with

mounting box in 20mm diameter metal conduit
including socket joints and other accessories (to a
distance not exceeding 12m):

52 Surface wiring in 2x2.5mm² PVC cable and 2.5mm² no $131.70 SZ023

PVC earth cable.

53 Surface wiring in 2x2.5mm² PVC/PVC cable and no $137.00 SZ024

2.5mm² PVC earth cable.
 Page 10 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

B POWER/HEATER POINT (CONT'D)

Concealed Wiring In PVC Pipe Conduit

13 amp 1-gang white plate switch socket-outlet point

with mounting box comprising of cables drawn
through and including 20mm diameter PVC pipes
cast/embedded in slab/wall complete with tees,
connectors and other accessories:

54 Concealed wiring in 2x2.5mm² PVC cable and no $73.40 SZ917

2.5mm² earth cable (to a distance not exceeding
12m).

55 Each additional point to item SZ917 (to a distance no $36.00 SZ918

not exceeding 5m).

56 Each additional point to item SZ917 (to a distance no $58.40 SZ919

exceeding 5m but not exceeding 10m).

13 amp 1-gang white plate switch socket-outlet point

with mounting box comprising of cables drawn
through and including 25mm diameter PVC pipes
cast/embedded in slab/wall complete with tees,
connectors and other accessories:

57 Concealed wiring in 2x2.5mm² PVC cable and no $75.80 SZ920

2.5mm² earth cable (to a distance not exceeding
12m).

58 Each additional point to item SZ920 (to a distance no $37.00 SZ921

not exceeding 5m).

59 Each additional point to item SZ920 (to a distance no $60.50 SZ922

exceeding 5m but not exceeding 10m).

60 Extra over the items SZ917 to SZ919 and SZ920 to SZ922 no $10.20 SZ923
for 13-amp 2-gang white plate switch socket-outlet point
complete with mounting box.

61 Extra over the items SZ917 to SZ919 and SZ920 to SZ922 no $14.70 SZ924
for 15-amp 1-gang white plate switch socket-outlet point
complete with mounting box.
 Page 11 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

B POWER/HEATER POINT (CONT'D)

Concealed Wiring In PVC Pipe Conduit (Cont'd)

20-Amp heater point complete with heater connection

unit and heater indication switch comprising of cables
drawn through and including 20mm diameter PVC
pipes cast/embedded in slab/wall complete with tees,
connectors and other accessories:

62 Concealed wiring in 2x2.5mm² PVC cable and no $102.40 SZ958

2.5mm² earth cable (to a distance not exceeding
12m).

63 Each additional point to item SZ958 (to a distance no $50.30 SZ959

not exceeding 5m).

C CIRCUIT WIRING

Earthing Conductors

Earth wiring including all fixings and connections

(cable trunking/tray and conduits to be measured
separately):-

64 25x3mm copper tape. m $18.00 SZ207

65 300mm² PVC earth cable. m $38.50 SZ949

66 240mm² PVC earth cable. m $31.00 SZ712

67 185mm² PVC earth cable. m $23.60 SZ713

68 150mm² PVC earth cable. m $18.80 SZ714

69 120mm² PVC earth cable. m $15.60 SZ715

70 95mm² PVC earth cable. m $12.10 SZ716

71 70mm² PVC earth cable. m $8.90 SZ717

72 50mm² PVC earth cable. m $8.20 SZ718

73 35mm² PVC earth cable. m $6.50 SZ719

74 25mm² PVC earth cable. m $4.20 SZ720

75 16mm² PVC earth cable. m $2.80 SZ721

76 10mm² PVC earth cable. m $2.00 SZ722

 Page 12 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

C CIRCUIT WIRING(CONT'D)

Earthing Conductors (Cont'd)

Earth wiring including all fixings and connections

(cable trunking/tray and conduits to be measured
separately) (Cont'd):-

77 6mm² PVC earth cable. m $1.40 SZ723

78 4mm² PVC earth cable. m $1.20 SZ724

79 2.5mm² PVC earth cable. m $0.90 SZ725

80 1.5mm² PVC earth cable. m $0.80 SZ726

PVC/PVC cable

Circuit wiring including all fixings and connections

(earthing conductors, cable trunking/tray and conduits
to be measured separately):

81 4x185mm² PVC/PVC cable. m $106.50 SZ025

82 4x150mm² PVC/PVC cable. m $113.30 SZ701

83 4x120mm² PVC/PVC cable. m $71.60 SZ026

84 4x95mm² PVC/PVC cable. m $55.00 SZ027

85 4x70mm² PVC/PVC cable. m $41.30 SZ028

86 4x50mm² PVC/PVC cable. m $30.60 SZ029

87 4x35mm² PVC/PVC cable. m $24.10 SZ030

88 4x25mm² PVC/PVC cable. m $17.90 SZ031

89 4x16mm² PVC/PVC cable. m $12.70 SZ699

90 4x10mm² PVC/PVC cable. m $9.50 SZ700

91 4x6mm² PVC/PVC cable. m $7.20 SZ283

92 2x50mm² PVC/PVC cable. m $15.80 SZ032

93 2x35mm² PVC/PVC cable. m $12.50 SZ033

94 2x25mm² PVC/PVC cable. m $9.40 SZ034

 Page 13 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

C CIRCUIT WIRING (CONT'D)

PVC/PVC cable (Cont'd)

Circuit wiring including all fixings and connections

(earthing conductors, cable trunking/tray and conduits
to be measured separately) (Cont'd):

95 2x16mm² PVC/PVC cable. m $6.80 SZ035

96 2x10mm² PVC/PVC cable. m $5.20 SZ036

97 2x6mm² PVC/PVC cable. m $4.10 SZ037

98 2x4mm² PVC/PVC cable. m $3.50 SZ038

99 2x2.5mm² PVC/PVC cable. m $3.00 SZ039

100 2x1.5mm² PVC/PVC cable. m $2.80 SZ040

PVC cable

Circuit wiring including drawing cables through

concealed pipe conduits complete with all necessary
fixings and connections (conduits measured
separately):

101 2x1.5mm² PVC cable & 1.5mm² PVC earth cable. m $2.70 SZ928

102 2x2.5mm² PVC cable & 2.5mm² PVC earth cable. m $3.10 SZ929

103 2x6mm² PVC cable & 6mm² PVC earth cable. m $4.70 SZ930

104 2x10mm² PVC cable & 10mm² PVC earth cable. m $6.30 SZ931

Circuit wiring including all fixings and connections

(earthing conductors, cable trunking/tray and conduits
to be measured separately):

105 4x240mm² PVC cable. m $124.70 SZ306

106 4x185mm² PVC cable. m $95.00 SZ320

107 4x150mm² PVC cable. m $75.80 SZ307

108 4x120mm² PVC cable. m $63.00 SZ321

109 4x95mm² PVC cable. m $48.90 SZ322

110 4x70mm² PVC cable. m $36.20 SZ323

111 4x50mm² PVC cable. m $33.20 SZ702

 Page 14 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

C CIRCUIT WIRING (CONT'D)

PVC Cable (Cont'd)

112 4x35mm² PVC cable. m $26.40 SZ703

113 4x25mm² PVC cable. m $17.20 SZ308

114 4x16mm² PVC cable. m $11.60 SZ488

115 4x10mm² PVC cable. m $8.50 SZ309

116 2x50mm² PVC cable. m $17.10 SZ704

117 2x35mm² PVC cable. m $13.70 SZ705

118 2x25mm² PVC cable. m $9.10 SZ041

119 2x16mm² PVC cable. m $6.30 SZ042

120 2x10mm² PVC cable. m $4.70 SZ043

121 2x6mm² PVC cable. m $3.60 SZ044

122 2x4mm² PVC cable. m $3.10 SZ045

123 2x2.5mm² PVC cable. m $2.60 SZ046

124 2x1.5mm² PVC cable. m $2.30 SZ047

XLPE/PVC Cable

Circuit wiring including all fixings and connections

(earthing conductors, cable trunking/tray and conduits
to be measured separately):

125 4x300mm² XLPE/PVC cable. m $160.40 SZ954

126 4x240mm² XLPE/PVC cable. m $129.60 SZ482

127 4x185mm² XLPE/PVC cable. m $98.80 SZ483

128 4x150mm² XLPE/PVC cable. m $79.90 SZ484

129 4x120mm² XLPE/PVC cable. m $66.10 SZ485

130 4x95mm² XLPE/PVC cable. m $51.80 SZ486

131 4x70mm² XLPE/PVC cable. m $39.10 SZ487

 Page 15 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

C CIRCUIT WIRING (CONT'D)

Fire resistant cable

Circuit wiring including all fixings and connections

(earthing conductors, cable trunking/tray and conduit
to be measured separately):

132 4x150mm² fire resistant cable. m $94.20 SZ706

133 4x120mm² fire resistant cable. m $79.30 SZ707

134 4x95mm² fire resistant cable. m $66.00 SZ708

135 4x70mm² fire resistant cable. m $51.00 SZ684

136 4x50mm² fire resistant cable. m $39.70 SZ048

137 4x35mm² fire resistant cable. m $32.50 SZ049

138 4x25mm² fire resistant cable. m $25.00 SZ050

139 4x16mm² fire resistant cable. m $19.30 SZ051

140 4x10mm² fire resistant cable. m $16.20 SZ709

141 4x6mm² fire resistant cable. m $13.20 SZ710

142 4x4mm² fire resistant cable. m $11.60 SZ711

143 2x10mm² fire resistant cable. m $8.10 Z0222

144 2x6mm² fire resistant cable. m $6.60 Z0221

145 2x4mm² fire resistant cable. m $5.90 Z0220

146 2x2.5mm² fire resistant cable. m $5.30 SZ301

147 2x1.5mm² fire resistant cable. m $4.90 SZ300

 Page 16 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

C CIRCUIT WIRING (CONT'D)

XLPE/SWA/PVC cable

XLPE/SWA/PVC underground armoured cable laid in

trench (terminations and excavation of trench to be
measured separately):

148 2.5mm² 2-core cable. m $4.20 SZ950

149 6mm² 2-core cable. m $5.60 SZ058

150 10mm² 2-core cable. m $8.50 SZ059

151 16mm² 2-core cable. m $10.70 SZ060

152 25mm² 2-core cable. m $14.10 SZ061

153 6mm² 3-core cable. m $8.00 SZ489

154 10mm² 3-core cable. m $10.60 SZ490

155 16mm² 3-core cable. m $14.00 SZ491

156 25mm² 3-core cable. m $19.40 SZ492

157 6mm² 4-core cable. m $9.20 SZ727

158 10mm² 4-core cable. m $11.30 SZ062

159 16mm² 4-core cable. m $15.60 SZ063

160 25mm² 4-core cable. m $21.60 SZ064

161 35mm² 4-core cable. m $28.50 SZ065

162 50mm² 4-core cable. m $36.70 SZ066

163 70mm² 4-core cable. m $59.10 SZ728

164 95mm² 4-core cable. m $76.20 SZ729

165 120mm² 4-core cable. m $97.80 SZ730

166 150mm² 4-core cable. m $117.30 SZ731

167 185mm² 4-core cable. m $142.90 SZ732

168 240mm² 4-core cable. m $186.30 SZ733

169 300mm² 4-core cable. m $231.10 SZ933

170 2.5mm² 12-core cable. m $15.70 SZ951

 Page 17 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

C CIRCUIT WIRING (CONT'D)

Terminations for XLPE/SWA/PVC cable including

sealing assembly and cable gland:

171 2.5mm² 2- core cable. no $10.00 Z0223

172 6mm² 2- core cable. no $13.30 SZ067

173 10mm² 2- core cable. no $14.30 SZ068

174 16mm² 2- core cable. no $16.10 SZ069

175 25mm² 2- core cable. no $17.40 SZ070

176 6mm² 3- core cable. no $13.80 SZ493

177 10mm² 3- core cable. no $13.80 SZ494

178 16mm² 3- core cable. no $14.40 SZ495

179 25mm² 3- core cable. no $15.40 SZ496

180 10mm² 4- core cable. no $24.10 SZ071

181 16mm² 4- core cable. no $25.90 SZ072

182 25mm² 4- core cable. no $27.70 SZ073

183 35mm² 4- core cable. no $28.30 SZ074

184 50mm² 4- core cable. no $29.50 SZ075

185 70mm² 4- core cable. no $38.40 SZ691

186 95mm² 4- core cable. no $40.80 SZ692

187 120mm² 4- core cable. no $46.40 SZ693

188 150mm² 4- core cable. no $61.50 SZ694

189 185mm² 4- core cable. no $61.50 SZ695

190 240mm² 4- core cable. no $67.50 SZ906

191 300mm² 4- core cable. no $77.10 SZ934

 Page 18 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

C CIRCUIT WIRING (CONT'D)

Pipe Crossings/Cover Plates

UPVC pipes Class 'B' laid in trench for crossings

(trench measured separately):

192 80mm diameter UPVC pipe. m $9.70 SZ081

193 100mm diameter UPVC pipe. m $17.30 SZ082

UPVC high impact resistant cable cover plates:

194 150mm wide x 2mm thick flat cable cover plate. m $5.80 SZ260

195 150mm wide x 2mm thick angled cable cover plate. m $5.80 SZ261
 Page 19 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

D CABLE SUPPORT SYSTEMS

PVC trunking

PVC trunking complete with accessories including

fixing to wall or ceiling:

196 60mm x 20mm three compartment. m $9.20 Z0224

197 80mm x 32mm twin compartment. m $10.30 SZ084

198 60mm x 20mm twin compartment. m $8.10 SZ085

199 40mm x 20mm single compartment. m $7.30 SZ086

200 40mm x 16mm single compartment. m $5.50 SZ087

201 32mm x 16mm single compartment. m $5.20 SZ088

202 25mm x 12.5mm single compartment. m $5.10 SZ089

Metal conduit

Galvanised steel conduit fixed to wall or ceiling

complete with spacer bar saddles:

203 20mm diameter. m $22.40 SZ090

204 25mm diameter. m $24.10 SZ091

205 32mm diameter. m $30.70 SZ092

206 20mm diameter inspection tee. no $3.90 SZ093

207 25mm diameter ditto. no $5.50 SZ094

208 32mm diameter ditto. no $7.40 SZ095

209 20mm diameter inspection bend. no $3.10 SZ096

210 25mm diameter ditto. no $5.50 SZ097

211 32mm diameter ditto. no $9.00 SZ098

212 20mm diameter inspection elbow. no $3.80 SZ099

213 25mm diameter ditto. no $4.30 SZ100

214 32mm diameter ditto. no $9.10 SZ101

 Page 20 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

D CABLE SUPPORT SYSTEMS (CONT'D)

Metal conduit (Cont'd)

Galvanised steel conduit fixed to wall or ceiling

complete with spacer bar saddles (Cont'd):

215 Circular through box with cover for 20mm diameter. no $3.00 SZ937

216 Circular T-junction box with cover for 20mm no $3.00 SZ944
diameter.

PVC conduit

High impact PVC conduit fixed to wall or ceiling

complete with spacer bar saddles:

217 20mm diameter. m $5.90 SZ102

218 25mm diameter. m $6.30 SZ103

219 32mm diameter. m $8.20 SZ104

220 20mm diameter inspection tee. no $3.30 SZ105

221 25mm diameter ditto. no $4.00 SZ106

222 32mm diameter inspection tee. no $6.90 SZ107

223 Circular junction box with lid for 20mm diameter. no $4.60 SZ108

224 Ditto for 25mm diameter. no $4.70 SZ109

Flexible PVC conduit fixed to wall or ceiling complete

with spacer bar saddles or suspension brackets, etc:

225 20mm diameter. m $5.30 SZ497

226 25mm diameter. m $5.50 SZ498

PVC concealed pipe conduit

PVC pipe conduit cast/embedded in slab/wall complete

with tees, connectors and other accessories:

227 20mm diameter. m $3.10 SZ925

228 25mm diameter. m $3.50 SZ926

229 32mm diameter. m $4.90 SZ927

 Page 21 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

D CABLE SUPPORT SYSTEMS (CONT'D)

Metal trunking

Electro-galvanised/phosphate-dipped steel trunking

with epoxy powder paint fixed to wall or ceiling
complete with standard joint accessories and cover:

230 50mm x 50mm. m $14.90 SZ110

231 75mm x 75mm. m $17.20 SZ936

232 100mm x 50mm. m $17.40 SZ111

233 150mm x 50mm. m $20.50 SZ112

234 150mm x 75mm. m $21.50 SZ962

235 200mm x 50mm. m $24.10 SZ113

236 200mm x 100mm. m $26.70 SZ948

237 250mm x 50mm. m $26.80 SZ114

238 300mm x 50mm. m $29.90 SZ115

239 300mm x 75mm. m $31.40 SZ685

Cable tray

Hot-dipped galvanised hot rolled perforated mild steel

cable trays fixed to wall or ceiling complete with
hangers and fixing accessories:

240 100mm width. m $26.70 SZ116

241 150mm width. m $28.50 SZ117

242 225mm width. m $35.10 SZ118

243 300mm width. m $46.60 SZ119

244 450mm width. m $71.30 SZ120

245 600mm width. m $88.00 SZ121

 Page 22 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

E ELECTRICAL ACCESSORIES

Consumer control unit

Insulated consumer control unit complete with 63A DP

isolator switch, 40A RCCB, DP 20KA DIN rail mounted
plug-in surge protector and:

246 6x6A-20A 6KA MCB. no $220.70 Z0225

247 12x6A-30A 6KA MCB. no $255.90 Z0226

248 Insulated consumer control unit complete with 63A DP no $184.40 Z0227
isolator switch, DP 20KA DIN rail mounted plug-in surge
protector and 6x6A-20A 6KA MCB.

249 Insulated consumer control unit complete with 40A/63A no $281.70 Z0228
DP M6 MCB with contact position indicator, 40A/63A
RCCB, DP 20KA DIN rail mounted plug-in surge protector
and 8x5A-32A 6KA MCB.

Split load insulated consumer control unit complete

with 40A/63A DP M6 MCB with contact position
indicator, 63A DP isolator, 40A/63A RCCB, DP 20KA
DIN rail mounted plug-in surge protector and:

250 9x6A-32A 6KA MCB. no $286.40 Z0229

251 10x6A-32A 6KA MCB. no $291.10 Z0230

252 12x6A-32A 6KA MCB. no $300.40 Z0231

Metal-clad consumer control unit complete with 63A

DP isolator switch and 40A RCCB:

253 6x6A-20A 6KA MCB. no $191.40 SZ128

254 12x6A-30A 6KA MCB. no $288.00 SZ131

255 Metal-clad consumer control unit complete with 63A DP no $170.70 SZ134
isolator switch and 6x6A-20A 6KA MCB.

256 Split load metal-clad consumer control unit complete with no $202.70 SZ136
63A DP isolator switch, 40A RCCB and 6x5A-20A 6KA
MCB.
 Page 23 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

E ELECTRICAL ACCESSORIES (CONT'D)

30mA trip RCCB complete with mounting box:

257 40A DP. no $113.20 SZ138

258 63A DP. no $140.70 SZ139

259 40A 4P. no $125.60 SZ503

260 63A 4P. no $170.30 SZ504

Switch fuse

Metal clad switch fuse complete with HRC fuse:

261 20A DP. no $87.50 SZ141

262 32A DP. no $116.20 SZ142

263 63A DP. no $253.20 SZ143

264 100A DP. no $372.70 SZ144

265 20A TPN. no $87.50 SZ145

266 32A TPN. no $116.20 SZ146

267 63A TPN. no $214.00 SZ147

268 100A TPN. no $372.70 SZ148

Miniature Circuit Breakers:

269 5A-20A SP 6KA. no $19.80 SZ140

270 40A DP M6. no $41.50 SZ466

271 63A DP M6. no $33.40 SZ324

 Page 24 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

E ELECTRICAL ACCESSORIES (CONT'D)

Isolator switch

Metal clad isolator switch:

272 10A TPN. no $109.00 SZ282

273 32A TPN. no $123.90 SZ151

274 63A TPN. no $146.00 SZ152

275 100A TPN. no $305.80 SZ153

276 200A TPN. no $598.50 SZ967

Weatherproof PVC isolator switch:

277 10A TPN. no $42.10 SZ505

278 20A TPN. no $47.40 SZ953

279 32A TPN. no $57.30 SZ509

280 63A TPN. no $73.70 Z0184

281 100A TPN. no $423.30 Z0185

Switchgears

282 Electrical meter box size approximately 530 x 300 x no $311.10 SZ158
180mm complete with all necessary ironmongery (other
accessories measured separately).

283 Lighting distribution board complete with 4x20A HRC no $1,151.00 SZ159
fuse, 6KA 20A/30A MCB, contactor, time switch, bypass
switch.

Moulded case circuit breaker (MCCB):

284 25KA 415V TP 15A-100A. no $183.60 SZ161

285 25KA 415V TP 125A-225A. no $345.00 SZ162

286 36KA 415V TP 125A-225A. no $391.30 SZ163

287 36KA 415V TP 250A-400A. no $555.10 SZ164

288 50KA 415V TP 450A-600A. no $1,189.20 SZ512

289 50KA 415V TP 700A-800A. no $1,495.60 SZ513

 Page 25 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

E ELECTRICAL ACCESSORIES (CONT'D)

Switchboard's accessories

Contactor:

290 30A DP. no $76.30 SZ165

291 60A DP. no $219.30 SZ166

292 30A 4P. no $132.40 SZ167

293 60A 4P. no $284.20 SZ168

294 Ripple control receiver. no $407.60 Z0187

295 Time switch of programmable logic relay module complete no $156.40 Z0242
with RS323C interface, built in timer and at least four
output points.

296 Metal enclosure box overall size approximately no $43.80 SZ318

200x320x130mm to house ripple control receiver.

Main switchboard's accessories or instruments

297 Ammeter - current transformer operated (0 - 1600A). no $45.60 SZ262

298 Voltmeter - rotary wafer type (0 - 500V). no $47.90 SZ263

299 Ammeter or Voltmeter selector switch. no $24.90 SZ264

300 Maximum demand Ammeter. no $172.10 SZ265

301 Indicating light complete with built-in transformer. no $23.90 SZ266

302 Earth Fault Relay with built-in timer. no $176.70 SZ267

303 Hour Run Meter. no $103.10 SZ281

304 Earth Leakage Relay with built-in timer. no $202.40 Z0186

305 Over-current Relay with built-in timer. no $300.90 SZ268

306 Over-current Relay of IDMTL (Inverse Definite Minimum no $1,898.70 SZ325

Time Lag) with 3/10 characteristics.

307 Digital Protection Relay for IDMTL and earth fault no $2,893.40 Z0232
protection, complete with measuring capability for ampere,
voltage, maximum demand, frequency, etc. and remote
monitoring features.
 Page 26 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

E ELECTRICAL ACCESSORIES (CONT'D)

Protective Transformer:

308 CT ratio 100/5 (5P10, 20VA). no $241.10 SZ514

309 CT ratio 200/5 (5P10, 20VA). no $135.30 SZ269

310 CT ratio 300/5 (5P10, 20VA). no $121.50 SZ270

311 CT ratio 400/5 (5P10, 20VA). no $107.70 SZ271

312 CT ratio 600/5 (5P10, 20VA). no $87.00 SZ272

313 CT ratio 1200/5 (5P10, 20VA). no $105.40 SZ273

314 CT ratio 1600/5 (5P10, 20VA). no $103.10 SZ274

Metering Current Transformer:

315 CT ratio 100/5 (Class 15VA). no $45.10 SZ515

316 CT ratio 200/5 (Class 15VA). no $29.50 SZ275

317 CT ratio 300/5 (Class 15VA). no $53.40 SZ276

318 CT ratio 400/5 (Class 15VA). no $54.60 SZ277

319 CT ratio 600/5 (Class 15VA). no $67.20 SZ278

320 CT ratio 1200/5 (Class 15VA). no $76.40 SZ279

321 CT ratio 1600/5 (Class 15VA). no $77.30 SZ280

Connectors

BI Connector:

322 60A. no $7.70 SZ170

323 100A. no $7.70 SZ171

324 200A. no $42.20 SZ172

325 20A DP heater connection unit. no $14.80 SZ516

326 10A polarised plug and socket connector. no $5.10 SZ173

327 5A white moulded batten lamp holder. no $7.00 SZ174

328 5A white moulded ceiling rose. no $9.60 SZ175

 Page 27 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

E ELECTRICAL ACCESSORIES (CONT'D)

Switches

6A White rocker plate switch complete with box for

surface mounting:

329 1-way 1-gang. no $14.10 SZ176

330 2-way 1-gang. no $15.50 SZ998

331 2-gang. no $16.50 SZ177

332 3-gang. no $20.90 SZ178

333 20A DP heater switch complete with box for surface no $24.00 SZ517
mounting.

6A Ultra thin plate switch complete with box for flush

mounting:

334 1-way 1-gang. no $20.10 SZ988

335 2-way 1-gang. no $20.90 SZ999

336 2-gang. no $27.70 SZ989

337 3-gang. no $40.30 SZ990

338 20A Ultra thin DP heater switch complete with box for flush no $45.60 SZ992
mounting.

339 White rocker plate bell push complete. no $15.40 SZ518

6A metal clad rocker switch complete with mounting

box:

340 1-way 1-gang. no $19.00 Z0218

341 2-way 1-gang. no $20.20 SZ180

342 2-gang. no $23.80 SZ181

343 3-gang. no $27.90 SZ182

 Page 28 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

E ELECTRICAL ACCESSORIES (CONT'D)

Switch socket outlets

Plate switch socket outlet complete with box for

surface mounting:

344 13A 1-gang. no $15.20 SZ184

345 13A 2-gang. no $20.30 SZ185

346 15A 1-gang. no $25.60 SZ188

Ultra thin switch socket outlet complete with box for

flush mounting:

347 13A 1-gang. no $22.10 SZ985

348 13A 2-gang. no $32.90 SZ986

349 15A 1-gang. no $36.80 SZ987

Metal clad switch socket outlet complete with

mounting box:

350 13A 1-gang. no $21.10 SZ186

351 13A 2-gang. no $28.20 SZ187

352 15A 1-gang. no $27.20 SZ189

PVC weatherproof switch socket outlet complete with

screw cap:

353 13A. no $43.80 SZ190

354 15A. no $72.50 SZ191

Metal type weatherproof switch socket outlet complete

with screw cap:

355 13A. no $53.60 SZ520

356 15A. no $81.60 SZ521

Plate switch socket outlet complete with USB:

357 13A 1-gang no $31.60 Z3362

358 13A 2-gang no $58.60 Z3364

359 Metal enclosure size 210x180x140mm to house switch no $20.50 SZ194

socket outlet complete with hinged door and cam lock.
 Page 29 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

F LUMINAIRES

360 AgilLiteS SL11-ES 2 feet 1100lm, 4000K IP54 luminaire, no $180.40 Z2243
dimmable with emergency battery pack.

361 AgilLiteS SL11-EM 2 feet 1100lm, 4000K IP54 luminaire, no $242.50 Z2244
dimmable with wireless networked HF motion sensor,
emergency battery pack.

362 AgilLiteS SL11-E 2 feet 1100lm, 4000K IP54 luminaire, no $237.90 Z2245
dimmable with wireless networked PIR motion sensor,
emergency battery pack.

363 AgiiLiteS SL11-M 2 feet 1100lm, 4000K IP54 luminaire, no $179.30 Z2246
dimmable with wireless networked HF motion sensor.

364 AgilLiteS SL22-M 4 feet 2200lm, 4000K IP54 luminaire, no $220.70 Z2252
dimmable with wireless networked HF motion sensor.

365 AgilLiteS SL22-ES 4 feet 2200lm, 4000K IP54 luminaire, no $221.80 Z2253
dimmable with emergency battery pack.

366 AgilLiteS SL22-EM 4 feet 2200lm, 4000K IP54 luminaire, no $283.90 Z2254
dimmable with wireless networked HF motion sensor,
emergency battery pack.

367 AgilLiteS SL08-E 2 feet 800lm, 4000K IP54 luminaire, no $228.70 Z2255
dimmable with wireless networked PIR motion sensor,
emergency battery pack.

368 AgilLiteS SL08-EM 2 feet 800lm, 4000K IP54 luminaire, no $233.30 Z2256
dimmable with wireless networked HF motion sensor,
emergency battery pack.

369 AgilLiteS SL08-ES 2 feet 800lm, 4000K IP54 luminaire no $171.20 Z2257
dimmable with emergency battery pack.

370 AgilLiteS SL16-E 4 feet 1600lm, 4000K IP54 luminaire, no $270.10 Z2258
dimmable with wireless networked PIR motion sensor,
emergency battery pack.

371 AgilLiteS SL16-EM 4 feet 1600lm, 4000K IP54 luminaire, no $274.70 Z2259
dimmable with wireless networked HF motion sensor,
emergency battery pack.

372 AgilLiteS SL16-ES 4 feet 1600lm, 4000K IP54 luminaire, no $212.60 Z2260
dimmable with emergency battery pack.

373 AgilLiteS SL22-E 4 feet 2200lm, 4000K IP54 luminaire, no $279.30 Z2261
dimmable with wireless networked PIR motion sensor,
emergency battery pack.
 Page 30 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

F LUMINAIRES (CONT'D)

374 AgilLiteS SL11 2 feet 1100lm, 4000K IP54 luminaire, no $174.70 Z2238
dimmable with wireless networked PIR motion sensor.

375 AgilLiteS SL08 2 feet 800lm, 4000K IP54 luminaire, no $165.50 Z2239
dimmable with wireless networked PIR motion sensor.

376 AgilLiteS SL11-S 2 feet 1100lm, 4000K IP54 luminaire, no $117.20 Z2240
dimmable.

377 AgilLiteS SL08-S 2 feet 800lm, 4000K IP54 luminaire, no $112.60 Z2241
dimmable.

378 AgilLiteS SL08-M 2 feet 800lm, 4000K IP54 luminaire, no $170.10 Z2242
dimmable with wireless networked HF motion sensor.

379 AgilLiteS SL22 4 feet 2200lm, 4000K IP54 luminaire, no $216.10 Z2247
dimmable with wireless networked PIR motion sensor.

380 AgilLiteS SL16 4 feet 1600lm, 4000K IP54 luminaire, no $206.90 Z2248
dimmable with wireless networked PIR motion sensor.

381 AgilLiteS SL22-S 4 feet 2200lm, 4000K IP54 luminaire, no $158.60 Z2249
dimmable.

382 AgilLiteS SL16-S 4 feet 1100lm, 4000K IP54 luminaire, no $149.40 Z2250
dimmable.

383 AgilLiteS SL16-M 4 feet 1600lm, 4000K IP54 luminaire, no $211.50 Z2251
dimmable with wireless networked HF motion sensor.
 Page 31 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

G LIGHTNING CONDUCTORS AND EARTH RODS

384 Aluminium 25mm x 3mm tape with aluminium clip and m $6.20 SZ205
base properly secured onto wall or roof for lightning
conductors.

385 Copper 25mm x 3mm tape with brass/bronze clip and m $18.00 SZ207
base properly secured onto wall or roof for lightning
conductors.

386 50mm² stranded bare copper conductors with m $16.00 SZ208

brass/bronze clip and base properly secured onto wall or
roof for lightning conductors.

387 70mm² stranded bare copper conductors with m $17.90 SZ209

brass/bronze clip and base properly secured onto wall or
roof for lightning conductors.

388 Air terminal 16mm diameter 300mm length aluminium $26.30 SZ210
complete with cast aluminium alloy base.

389 Air terminal 16mm diameter 300mm length copper no $32.80 SZ211
complete with leaded gunmetal base.

390 Bi-metallic aluminium-copper connector for 25mm x 3mm no $23.40 SZ212

tape.

391 Aluminium square tape clamp suitable for 25 x 3mm tape. no $15.30 SZ213

392 Copper square tape clamp suitable for 25 x 3mm tape. no $17.50 SZ968
 Page 32 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

G LIGHTNING CONDUCTORS AND EARTH RODS

(CONT'D)

393 Leaded gunmetal square tape clamp suitable for 25mm x no $21.30 SZ214
3mm tape.

394 Leaded gunmetal round test clamp. no $31.90 SZ215

395 Leaded gunmetal 'B' bond for bonding copper tape to no $17.90 SZ216
steel surface.

396 Aluminium 'B' bond for bonding aluminium tape to steel no $16.20 SZ217
surface.

397 Exothermic welded joint. no $39.60 SZ218

398 Earth rod 16mm diameter 1.8m long copper-weld, mild no $45.00 SZ221
steel rod driven in ground.

399 Interconnecting buried 25mm x 3mm copper tape. m $13.70 SZ222

400 Leaded gunmetal/naval brass earth rod clamp. no $18.30 SZ223

401 Aluminium/silicon/phosphor bronze earth rod coupling. no $7.90 SZ224

402 Clamp for earthing and bonding to pipe diameter 12mm no $3.20 SZ225
- 75mm.

403 250mm x 250mm x 3mm thick hot-dipped hinged-lid no $27.40 SZ226

inspection pit complete with plastic moulded pot.
 Page 33 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

H EXTERNAL LIGHTING

Lighting Columns

Hot dipped galvanised planted type lighting column

including excavation of pit, concrete footing, bitumen
coating of planted section, painting of identification
numbers, cutout complete with 5A-20A HRC fuse,
connecting accessories, (but excluding cable glands)
and backfilling and reinstatement of ground surfaces
as detailed in the drawings:

404 8m lighting column with single arm bracket. no $768.20 SZ227

405 10m lighting column with double arm bracket. no $966.40 Z0165

406 3m post top lighting column. no $393.60 SZ230

407 3.5m post top lighting column. no $422.80 SZ932

408 4m post top lighting column. no $441.40 SZ462

409 4.5m post top lighting column. no $459.80 Z0164

410 5m post top lighting column. no $536.20 SZ463

411 6m post top lighting column. no $649.80 SZ907

412 8m post top lighting column. no $787.80 SZ231

413 10m post top lighting column. no $976.20 SZ232

 Page 34 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

H EXTERNAL LIGHTING (CONT'D)

Lighting Columns (Cont'd)

Hot dipped galvanised flanged mounted type lighting

column including painting of identification numbers,
cutout complete with 5A-20A HRC fuse and
connecting accessories (but excluding cable glands)
as detailed in the drawings:

414 3m post top lighting column. no $540.50 Z0166

415 3.5m post top lighting column. no $573.80 Z0167

416 4m post top lighting column. no $607.70 Z0168

417 4.5m post top lighting column. no $641.10 Z0169

418 5m post top lighting column. no $675.00 Z0170

419 6m post top lighting column. no $788.00 Z3368

420 8m post top lighting column. no $949.00 Z3367

421 8m post top lighting column with 2m single arm. no $891.50 Z3365

422 8m post top lighting column with 2m double arm. no $949.00 Z3366

Accessories for lighting columns

423 Pole cap. no $69.30 Z0171

424 Banner bracket. no $86.00 Z0172

425 Centre ring 90mm diameter (OD). no $57.80 Z0173

426 Shoulder cover (Type 1) 76mm / 140mm diameter. no $159.00 Z0174

427 Shoulder cover (Type 1A) 100mm / 140mm no $164.20 Z0175

diameter.

428 Shoulder cover (Type 2) 76mm / 140mm diameter. no $136.60 Z0176

429 Shoulder cover (Type 2A) 100mm /140mm diameter. no $141.70 Z0177
 Page 35 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

H EXTERNAL LIGHTING (CONT'D)

Lighting Columns (Cont'd)

Painting of lighting columns

One coat of lead and chromate free primer and two
coats of polyurethene paint on the external surface
of lighting column:

430 3m-3.5m high column. no $11.60 Z0235

431 4m high column. no $13.90 Z0236

432 4.5m high column. no $15.40 Z0237

433 5m high column. no $16.90 Z0238

434 6m high column. no $22.60 Z0239

435 8m high column. no $31.40 Z0240

436 10m high column. no $39.10 Z0241

Polyester powder coating in standard RAL colour onto

the external surface of lighting column including all
necessary labour & transport.

437 3m high column. no $90.30 Z0178

438 3.5m high column. no $102.00 Z0179

439 4m high column. no $114.40 Z0180

440 4.5m high column. no $126.10 Z0181

441 5m high column. no $138.50 Z0182

442 6m high column. no $150.20 Z0183

443 8m high column. no $185.40 Z3371

444 8m high column including 2m single arm.. no $185.40 Z3369

445 8m high column including 2m double arm. no $222.50 Z3370

 Page 36 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

H EXTERNAL LIGHTING (CONT'D)

Lighting Luminaires

446 Supply and install of Category A Lighting Luminaires no $475.00 Z3000

complete with integral control gears and other accessories
for Driveway and Service Road.

447 Supply and install of Category B Lighting Luminaires no $325.00 Z3001

complete with integral control gears and other accessories
for Hardcourt.

448 Supply and install of Category C1 Lighting Luminaires no $676.00 Z3002

complete with integral control gears and other accessories
for ambience lighting at Landscape and Playground.

449 Supply and install of Category C2 Lighting Luminaires no $425.00 Z3003

complete with integral control gears and other accessories
for functional lighting at Landscape and Playground.

450 Supply and install of Category D Lighting Luminaires no $125.00 Z3004

complete with integral control gears and other accessories
for wall lighting at Linkway and Linkbuilding.

451 Supply and install of Category E Lighting Luminaires no $325.00 Z3005

complete with integral control gears and other accessories
for Flood Lightings.

Aviation Obstruction Light

452 Twin units aviation obstruction light (lightmast, control box, no $876.10 SZ961
cables, cable trunking/tray and conduits measured
separately).

453 Twin units aviation obstruction light complete with lighting no $945.10 SZ905
control box and lightmast (cables, cable trunking/tray and
conduits measured separately).
 Page 37 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

I EMERGENCY/EMERGENCY EXIT SIGN LUMINAIRES

454 PowerCraft EX-LED-M-RS-S,SR,SL,S-RM,SR-RM,SL-RM no $116.00 Z2290

quick fit recessed ceiling mounted single sided with or
without arrow maintained emergency exit or running man
sign complete with 1.2W ultra bright LED module, fire
retardant UL94 housing, with high temperature NiCd
batteries rated 3 hours emergency duration.

455 PowerCraft EX-LED-M-RS-D,DR,DL,D-RM,DR-RM,DL-RM no $116.00 Z2291

quick fit recessed ceiling mounted double sided with or
without arrow maintained emergency exit or running man
sign complete with 1.2W ultra bright LED module, fire
retardant UL94 housing, with high temperature NiCd
batteries rated 3 hours emergency duration.

456 PowerCraft EX-LED-M-QF-S,SR,SL,S-RM,SR-RM,SL-RM no $105.70 Z2292

quick fit suspended/surface mounted single sided with or
without arrow maintained emergency exit or running man
sign complete with 1.2W ultra bright LED module, fire
retardant UL94 housing, with high temperature NiCd
batteries rated 3 hours emergency duration.

457 PowerCraft EX-LED-M-QF-D,DR,DL,D-RM,DR-RM,DL-RM no $105.70 Z2293

quick fit suspended/surface mounted double sided with or
without arrow maintained emergency exit or running man
sign complete with 1.2W ultra bright LED module, fire
retardant UL94 housing, with high temperature NiCd
batteries rated 3 hours emergency duration.

458 PowerCraft EX-LED-M-S,SR,SL,S-RM,SR-RM,SL-RM no $105.70 Z2294

slimline suspended/surface mounted single sided with or
without arrow maintained emergency exit or running man
sign complete with 1.2W ultra bright LED module, with high
temperature NiCd batteries rated 3 hours emergency
duration.
 Page 38 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

I EMERGENCY/EMERGENCY EXIT SIGN LUMINAIRES

(CONT'D)

459 PowerCraft EX-LED-M-D,DR,DL,D-RM,DR-RM,DL-RM no $105.70 Z2295

slimline suspended/surface mounted double sided with or
without arrow maintained emergency exit or running man
sign complete with 1.2W ultra bright LED module, with high
temperature NiCd batteries rated 3 hours emergency
duration.

460 PowerCraft EXB-LED-M box type suspended/surface no $105.70 Z3324

mounted single sided with or without arrow maintained
emergency exit or running man sign complete 1.2W ultra
bright LED module and high temperature NiCd batteries
rated 3 hours emergency duration.

461 PowerCraft EXB-LED-M-WP weather proof box type semi - no $142.50 Z3325
recessed/surface mounted single sided with or without
arrow maintained emergency exit or running man sign
complete 1.2W ultra bright LED module and high
temperature NiCd batteries rated 3 hours emergency
duration.

462 PowerCraft EL-LED2NM non-maintained emergency no $89.60 Z3326

bulkhead complete with 2x3W LED module and high
temperature NiCd batteries rated 2 hours emergency
duration.
 Page 39 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

I EMERGENCY/EMERGENCY EXIT SIGN LUMINAIRES

(CONT'D)

463 PowerCraft REL50NM-LED-CY non-maintained surface no $200.00 Z3328

cylinder emergency light complete with 10W white LED
module and high temperature NiCd batteries rated 2 hours
emergency duration.

464 PowerCraft REL20NM-LED non-maintained recessed no $82.70 Z3329

emergency light complete with 60mm/120mm reflector,
3W white LED module and high temperature NiCd
batteries rated 3 hours emergency duration.

465 PowerCraft TED10NM non-maintained twin spot no $82.70 Z3330

emergency light complete with 2x3W white LED module
and high temperature NiCd batteries rated 2 hours
emergency duration.

466 PowerCraft REL10NM-LED-CU non-maintained recessed no $80.40 Z3336

emergency light complete with 3W white LED module and
high temperature NiCd batteries rated 3 hours emergency
duration.

467 PowerCraft REL10NM-LED-CY non-maintained surface no $89.60 Z3337

emergency light complete with 3W white LED module and
high temperature NiCd batteries rated 3 hours emergency
duration.

468 PowerCraft REL50NM-LED non-maintained recessed no $246.00 Z3338

emergency light complete with 10W white LED module and
high temperature NiCd batteries rated 2 hours emergency
duration.
 Page 40 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

I EMERGENCY/EMERGENCY EXIT SIGN LUMINAIRES

(CONT'D)

469 PNE/TEJ600 LED exit sign. no $87.30 Z2100

470 PNE TEX300 LED exit sign. no $87.30 Z2150

471 PNE TEX300 RA LED exit sign, single sided right arrow. no $87.30 Z2151

472 PNE TEX300 LA LED exit sign, single sided left arrow. no $87.30 Z2152

473 PNE TEX300 DWA LED exit sign, double sided with arrow. no $87.30 Z2153

474 PNE TEX300 RM LED exit sign, running man. no $87.30 Z2154

475 PNE TEX300 RM LA LED exit sign, running man with left no $87.30 Z2155
arrow.

476 PNE TEX300 RM DWA LED exit sign, running man double no $87.30 Z2156
sided with arrow.

477 PNE TEX300 RM RA LED exit sign, running man with right no $87.30 Z2196
arrow.
 Page 41 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

J FIRE ALARM ACCESSORIES

478 Manual break glass call point. no $39.80 SZ672

479 Weather resistant gasket for weatherproof manual call no $41.30 SZ673
point.

480 Weatherproof manual break glass call point complete with no $160.70 SZ674
gasket (IP65).

481 Ionisation smoke detector complete with LED and no $80.80 SZ675
mounting base.

482 Optical smoke detector complete with LED and mounting no $84.10 SZ676
base.

483 Fixed temperature cum Rate of Rise (ROR) heat detector no $56.20 SZ677
(Type A) complete with LED and mounting base.

484 Fixed temperature heat detector (Type B) complete with no $55.90 SZ678
LED and mounting base.

485 Fixed temperature heat detector (Type D) complete with no $61.20 SZ679
LED and mounting base.

486 Fixed temperature bi-metallic heat detector (Type B or no $54.60 Z0245

Grade 2) complete with LED .

487 Fixed temperature bi-metallic heat detector (Type D) no $58.90 Z0246

complete with LED.

488 Alarm bell. no $49.60 SZ680

489 Alarm bell complete with integral strobe light. no $109.40 SZ681

490 Weatherproof base box for alarm bell. no $50.30 SZ682

491 Weatherproof strobe light 24V dc (IP65). no $83.50 SZ683

Home Fire Alarm Device (HFAD) with integrated built-

in batteries including testing and commissioning (Rate
inclusive of the provision of a 10-year warranty):

492 HFAD Model Ei Electronics Ei650 no $87.30 Z3340

493 HFAD Model FireAngel ST622 no $56.80 Z3339

494 HFAD Model Honeywell XS100 no $104.50 Z3006

 Page 42 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

K TELEVISION SYSTEM

Broadband

495 Bridger Amplifier (cable TV distribution amplifier). no. $2,564.00

496 Trunk Amplifier (cable TV distribution amplifier). no. $2,899.90

Accessories (for Bridger/Trunk amplifier)

497 Cable Attenuator - SPB-X (where X denotes 0 to 20). no. $30.20

498 Cable Equaliser. no. $64.90

499 Cable Simulator. no. $65.20

500 Plug-in Directional Coupler. no. $56.40

501 Plug-in Splitter. no. $56.40

Coaxial Cable

502 Coaxial Cable (for RG-6 type). m $1.40

503 Coaxial Cable (for 'solid' type). m $6.10

504 Coaxial Cable (for underground type). m $7.20

S Connector

505 Connector ('F' Male) (for RG-6 type). no. $2.70

506 Connector ('F' Male) (for '412' type). no. $16.50

507 Connector ('F' Male) (for '540' type). no $17.50

508 Connector (pin) (for '412' type). no. $21.10

509 Connector (pin) (for '540' type). no. $14.60

510 Connector (splice) (for '540' type). no. $23.90

511 Connector (terminator) (for RG-6 type). no. $2.30

512 Connector (terminator) (for unused port of OUTDOOR tap, no. $15.70
etc).

20A Isolator

513 Key Switch type. no. $57.70

 Page 43 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

K TELEVISION SYSTEM (CONT'D)

Power Supply

514 Power Supply (2A) (for cable TV). no. $625.20

515 Power Supply (3A) (for cable TV). no. $625.20

516 Power Supply (4A) (for cable TV). no. $625.20

517 Power Supply (6A) (for cable TV). no. $625.20

518 Power Supply (9A) (for cable TV). no. $808.10

519 Power Supply (15A) (for cable TV). no. $960.50

Splitter

520 Splitter (2-way) (indoor). no. $6.30

521 Splitter (3-way) (indoor). no. $8.10

522 Splitter (4-way) (indoor). no. $9.30

523 Splitter (2-way) (outdoor). no. $50.60

524 Splitter (3-way) (outdoor). no. $55.30

Subscriber Outlet - Isolator

525 Outlet (Isolator type). no. $20.30

526 Outlet (box base, 1 ½ gang type). no. $2.70

527 Outlet (box base, 2 gang type). no. $2.70

528 Outlet (TV/FM front plate, 1 ½ gang type 2). no. $22.70

529 Outlet (TV/FM front plate, 2 gang type). no. $30.80

 Page 44 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

K TELEVISION SYSTEM (CONT'D)

Tee Unit

530 Tee unit (2-way) (outdoor). no. $47.30

531 Tee unit (4-way) (outdoor). no. $57.50

532 Tee unit (8-way) (outdoor). no. $95.30

533 Tee unit (Directional Coupler). no. $48.90

534 Tee unit (Power Inserter). no. $52.60

Metal Conduits - BS4568 including painting and others

associated with the work

535 20 mm diameter. m $9.50

536 25 mm diameter. m $11.00

PVC Conduits - HEAVY GAUGE including painting and

others associated with the work

537 20 mm diameter. m $4.00

538 25 mm diameter. m $5.20

539 50 mm diameter. m $10.30

540 110 mm diameter. m $33.80

 Page 45 of 45

HOUSING AND DEVELOPMENT BOARD

STANDARD SCHEDULE OF RATES FOR ELECTRICAL WORKS (JUL 2020 EDITION)
S/N DESCRIPTION UNIT RATE($) CODE

K TELEVISION SYSTEM (CONT'D)

Miscellaneous Items

541 Metal Tap-Off box (Heavy duty type) - (200(L) x 200(B) x no. $163.20
600(H)) mm approx., with lock & concrete mix base
(400(L) x 400(B) x 300(H)) mm approx.

542 Metallic tee/splitter box (200(L) x 180(B) x 350(H)) mm no. $97.70

approx.

543 Metallic tee/splitter box (200(L) x 180(B) x 300(H)) mm no. $91.00

approx.

544 Metallic tee/splitter box (180(L) x 120(B) x 300(H)) mm no. $84.40

approx.

545 Amplifier bracket complete powder coating (for Cable TV no. $67.60
distribution amplifier).

546 PVC trunking inclusive of PVC saddles & 'Hilti' nails or m $8.10
equivalent (20 x 40) mm approx.

547 PVC trunking inclusive of PVC saddles & 'Hilti' nails or m $11.00
equivalent (50 x 50) mm approx.

548 PVC trunking inclusive of PVC saddles & ‘Hilti’ nails or m $16.60
equivalent (100 x 50) mm approx.