Data sheet
SAKT E/35 2GL 115VAC Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Product image
Why not integrating simple electrical functions into a feed
through terminal. It has the same slim design of our feed-
through terminal blocks - with additional functions such
as cross-connections that can be used. Often, you only
need a small component to integrate an external device
into your automation technology. Our modular terminal
blocks with electronic components make this possible;
quickly, simply, and with a perfect fit.
General ordering data
Version SAK Series, Test-disconnect terminal, Rated cross-
section: 6 mm², Screw connection, medium
yellow, Direct mounting
Order No. 0198020000
Type SAKT E/35 2GL 115VAC
GTIN (EAN) 4008190000165
Qty.
5 pc(s).
Creation date May 17, 2023 3:50:28 PM CEST
Catalogue status 12.05.2023 / We reserve the right to make technical changes. 1
Data sheet
SAKT E/35 2GL 115VAC Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Dimensions and weights
Depth 52.5 mm Depth (inches) 2.067 inch
Height 65 mm Height (inches) 2.559 inch
Width 16 mm Width (inches) 0.63 inch
Net weight 67.8 g
Temperatures
Storage temperature -25 °C...55 °C Continuous operating temp., min. -60 °C
Continuous operating temp., max. 130 °C
Material data
Material KrG Colour medium yellow
UL 94 flammability rating V-0, 5VA
System specifications
Version Screw connection, Special End cover plate required
terminal longitudinal
isolator, With glow lamp,
for screwable cross-
connection Yes
Number of potentials 1 Number of levels 1
Number of clamping points per level 4 Number of potentials per tier 1
Levels cross-connected internally No PE connection No
Rail TS 35 N-function No
PE function No PEN function No
Additional technical data
Installation advice Direct mounting Open sides right
Type of mounting Snap-on
Conductors for clamping (rated connection)
Blade size 4.0 x 0.8 mm Clamping range, max. 10 mm²
Clamping range, min. 0.5 mm² Clamping screw M 3.5
Connection direction on side Gauge to IEC 60947-1 A5
Number of connections 2 Stripping length 12 mm
Type of connection Wire connection cross section, finely
Screw connection stranded, max. 6 mm²
Wire connection cross section, finely Wire connection cross-section, finely
stranded, min. stranded with wire-end ferrules DIN
0.5 mm² 46228/1, max. 6 mm²
Wire connection cross-section, finely Wire connection cross-section, finely
stranded with wire-end ferrules DIN stranded with wire-end ferrules DIN
46228/1, min. 0.5 mm² 46228/4, max. 6 mm²
Wire connection cross-section, finely Wire connection cross-section, solid
stranded with wire-end ferrules DIN core, max.
46228/4, min. 0.5 mm² 10 mm²
Wire connection cross-section, solid
core, min.
0.5 mm²
General
Installation advice Direct mounting Rail TS 35
Creation date May 17, 2023 3:50:28 PM CEST
Catalogue status 12.05.2023 / We reserve the right to make technical changes. 2
Data sheet
SAKT E/35 2GL 115VAC Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Rating data
Rated cross-section 6 mm² Rated voltage 115 V
Rated current 27 A Current at maximum wires 27 A
Volume resistance according to IEC Power loss in accordance with IEC
60947-7-x 0.78 mΩ 60947-7-x 1.31 W
Pollution severity 3
Classifications
ETIM 6.0 EC000902 ETIM 7.0 EC000902
ETIM 8.0 EC000902 ECLASS 9.0 27-14-11-26
ECLASS 9.1 27-14-11-26 ECLASS 10.0 27-14-11-26
ECLASS 11.0 27-14-11-26 ECLASS 12.0 27-14-11-26
Approvals
Approvals
ROHS
Conform
Downloads
Approval/Certificate/Document of EAC certificate
Conformity Declaration of Conformity
CE Declaration of Conformity all terminals
Engineering Data WSCAD, EPLAN
User Documentation StorageConditionsTerminalBlocks
Catalogues
Catalogues in PDF-format
Creation date May 17, 2023 3:50:28 PM CEST
Catalogue status 12.05.2023 / We reserve the right to make technical changes. 3
