Mild Steel Plain Plates - Grade 250 (Plus Coils).

Specification - AS/NZS 3678:2011-250. Coil Plate Details.

Thickness 2 Kg per Linear metre of Plate Width. 910mm - 1765mm-
Mass/m Colour Thickness
mm kg/m2 1200 1500 1800 2400 3000 Coding mm 1550mm 1800mm
3 23.55 28.26 35.33 42.39 56.50 - Blue 3 ¥ ¥
4 31.40 37.68 47.10 56.52 75.40 - Green 4 ¥ ¥
5 39.25 47.10 58.87 70.65 94.20 117.75 Orange 5 ¥ ¥
6 47.10 56.52 70.65 84.78 113.04 141.30 White 6 ¥ ¥
8 62.80 75.36 94.20 113.04 150.72 188.40 Red 8 ¥ ¥
10 78.50 94.20 117.75 141.30 188.40 235.50 Yellow 10 ¥ ¥
12 94.20 113.04 141.30 169.56 226.08 282.60 Pink 12 ¥ ¥
16 125.60 150.72 188.40 226.08 301.44 376.80 Grey The advantages of coil plate and/or floor
20 157.00 188.40 235.50 282.60 376.80 471.00 Green plate is that repetitive lengths may be
25 196.25 235.50 294.38 353.25 471.00 588.75 Purple cut to minimize any wastage
28 219.80 264.00 330.00 396.00 527.52 - Blue Coils may weigh as much as 14 tonne
32 251.20 301.00 377.00 452.16 602.88 - Orange and must be cut to length in their entirety.
36 282.60 339.00 424.00 509.00 678.24 - Red There are specialty sites that uncoil, cut to
40 314.00 377.00 471.00 565.20 753.60 - Yellow length and stack for transportation.
45 353.25 424.00 530.00 636.00 847.80 - Grey
50 392.50 471.00 589.00 706.50 942.00 - Green
55
Size may be written along the edge of these plates

431.75 518.00 648.00 777.00 1036.20 -

60 471.00 565.00 707.00 847.80 1130.40 -
65 510.00 612.00 765.00 918.00 1224.00
70 549.50 659.00 824.00 989.10 1318.80 -
80 628.00 754.00 942.00 1130.40 1507.20 -
90 706.50 848.00 1060.00 1272.00 1695.60 -
100 785.00 942.00 1178.00 1413.00 1884.00 -
110 863.50 - - 1554.30 2072.40 -
120 942.00 - - 1695.60 2260.80 -
130 1021.00 - - 1837.80 2450.40 -
140 1099.00 - - 1978.20 2637.60 -
150 1177.50 - - 2119.50 2826.00 -
To calculate the weight of plate, multiply the plate thickness by 7.850 = kg/m²
Requests for Test Certificates must be placed with original order or a search surcharge may apply.

Mild Steel Floor Plates - Grade 250. ( Coil Details)

Floor Plate (Checker Plate/Tread Plate) - AS/NZS 3678 - 2011. Floor Plate Coil Details.
Thickness Mass/m2 Kg per Linear metre of Plate Width Colour Thickness 1200 1500 1800
Standard plate sizes.
mm kg/m2 1800 mm (Lozenge height = 1.5mm.) Coding mm wide - mm.
6 49.10 88.38 6.0m x 1800mm White 2.1* ¥ - -
8 64.80 116.64 6.0m x 1800mm Red 3.0 ¥ - -
10 80.50 144.90 6.0m x 1800mm Yellow 5.0 ¥ ¥ -
12 96.20 173.16 6.0m x 1800mm Pink 6.0 ¥ ¥ ¥
8.0 - ¥ -
The raised nodules on Floor/Tread plate adds another 2 kg/m² to the weight.
34
 Plain Plate - AS/NZS 3678-350
Thickness 2 Kilograms per Linear metre of Plate Width. Available Plate lengths.
Mass/m
mm kg/m2 2400 3000 3100 2400 3000
5 39.25 94.20 117.75 - 6.0m & 9.0m, 9.0m
6 47.10 113.04 - - 9.6m -
8 62.80 150.72 - - 9.6m -
10 78.50 188.40 - 243.35 9.6m 9.6m x 3.10m
12 94.20 226.08 - 292.02 9.6m 9.6m x 3.10m
16 125.60 301.44 - 389.36 9.6m 9.6m x 3.10m
20 157.00 376.80 - 486.70 9.6m 9.6m x 3.10m
25 196.25 471.00 - - 9.6m -
32 251.20 602.88 - - 9.6m -
40 314.00 753.60 - - 7.6m -
50 392.50 942.00 - - 7.6m -
60 471.00 1130.40 - - 7.6m -
70 549.50 1318.80 - - 6.0m -
80 628.00 1507.20 - - 5.5m -

Pressure Vessel Plates.

Pressure Vessel Plate - SA/AS 1548-7-460R
Thickness 2 Kilograms per Linear metre of Plate Width. Plate lengths available
Mass/m
mm kg/m2 2400 3000 3100 2400 3100
5 39.25 94.20 - - 9.0m -

Boiler Plates - (To be "Crown" stamped).

Boiler Plate - SA/AS 1548-7-460R

Thickness Mass/m2 Kilograms per Linear metre of Plate Width. Plate lengths available
mm kg/m2 2400 3000 3100 2400 3100
6 47.10 - - n/a - 9.6m
8 62.80 - - 194.68 - 9.6m
10 78.50 - - 243.35 - 9.6m
12 94.20 - - 292.02 - 9.6m
16 125.60 - - 389.36 - 9.6m
20 157.00 - - 486.70 - 9.6m
25 196.25 - - 608.38 - 9.6m
32 251.20 - - 778.72 - 9.6m
40 314.00 753.60 - - 9.6m -
50 392.50 942.00 - - 9.6m -
60 471.00 1130.40 - - 6.0m -
70 549.50 1318.80 - - 6.0m -
80 628.00 1507.20 - - 5.2m -
90 706.50 1695.60 - - 5.2m -
100 785.00 1884.00 - - 5.2m -
35
 Quenched & Tempered Plates.

MACHINING. WELDING. BENDING.

Hardox® wear plate is easy to machine. Hardox® wear plate has great weldability to any The uniform properties, close thickness
Drilling, countersinking, tapping and milling is type of weldable steel. Flatness and narrow tolerances and smooth surfaces make
performed with high-speed steel tools. thickness tolerances make automatic welding Hardox® wear plates well suited to free bending
easy and shorten the time for fit-up and tacking. and roll-forming.

CUTTING. UNDERGROUND MINING. RECYCLING.

Hardox® wear plate is suitable for both hot and Hardox® wear plate is a reliable and Recycling processes, such as the fragmentizing
cold cutting. Recommended hot methods are flexible solution for underground mining of waste, places enormous demands on
oxy-fuel, plasma cutting and laser cutting. For operations. Its outstanding weldability and equipment. In order to stay productive and
optimal laser-cutting performance you can workshop-friendly properties make it easy to competitive it is vital to use materials that
order Hardox® unpainted and with an enhanced perform on-site repairs, often inside the mine withstand the abuse. Hardox® wear plate is the
surface finish. When heating is not desired, without having to bring the equipment to the solution. Developed specifically for tough
Hardox® wear plate can be cut cold by water jet surface. This keeps production up and demands, Hardox® wear plate allows recyclers
shearing, sawing or grinding. maintenance costs down. and recycling equipment manufacturers to cut
Front loaders Dump trucks costs, improve service life, and optimize
Buffer bins Transfer chute production.
Feeder Screener Garbage truck Liner plates
Crusher Skip Hammer mills Shredders

ROAD BUILDING.
Road building needs a variety of equipment,
from trucks that transport heavy material long
distances to machines that withstand extreme Excavator bucket Bucket
wear when breaking ground. The unique Crusher Tipper
properties of Hardox® wear plate takes you Bulldozer Grader
beyond conventional design thinking. For Rollers Asphalt milling
example, its superior strength allows for Cement mixers Dump trucks
thinner steel that lowers overall weight and
enables increased payloads.
All details courtesy of SSAB.
36
 Hardox® wear plate - The Beast
HARDOX® PLATE AND SHEET

Hardness Impact toughness Relative CEV/CET Thickness range

Hardox® grade nominal HBW CVL typical for 20 mm (¾”) service life typical for mm
1 2
J at-40°C (ft-lb at -40°F) interval 20 mm (¾”) (inches)

40-160
Hardox® HiTuf 350 95 (70) - 0.55/0.363
(1.57-6.3)
2-130
Hardox® 400 400 45 (33) 1 0.44/0.28
(0.079 -5.12)4
2.5-130
0.56/0.38 4
(0.098-5.12)
Hardox® 450 450 50 (37) 1.1-1.7
0.7-2.1
0.39/ 0.31 5
(0.028-0.083)
3-103
Hardox® 500 500 37 (27) 1.3-2.1 0.63/0.41
(0.118-4.06)
4-25
Hardox® 500 Tuf 475-505 45 (33) 1.3-2.1 0.52/0.36
(0.079-0.985)
8-65
Hardox® 550 550 30 (22) 1.5-4.0 0.72/0.48
(0.315-2.56)
Hardox® 600 600 20 (15) 1.8-8.0 0.76/0.58 6-65, metric only

Hardox® Extreme 650-700 15 (< 11) 2.0-18.0 0.65/0.54 8-19, metric only
5-51
Hardox® HiTemp 350-400 60 (44) - 0.59/0.40
(0.197-2)
All plates are produced according to Hardox® wear plate guarantees or better. 3. 70 mm (2.76”)
1. Max/min sliding wear by SSAB WearCalc (mild steel 0.2-0,8) 4. Up to 160 mm (6.30”) available upon request
2. CEV=C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15;CET=C+(Mn+Mo)10+(Cr+Cu)/20+Ni/40 5. Hardox® 450 CR

HARDOX® TUBE

Hardness Yield strength Diameter external Wall thickness

Hardox® grade
nominal HBW typical MPa (Ksi) mm (inches) mm (inches)
3.0-6.0
Hardox® 400 400 1000-1300 (145-188) 76.1-219.1 (3-8 5/8)
(0.118-0.236)
2.0-6.0
Hardox® 500 500 1200 (> 174) 76.1-133 (3-5.24)
(0.079-0.236)

HARDOX® ROUND BAR

Hardness Impact toughness CVL typical for 20 CEV/CET typical Bar diameter
Hardox® grade
nominal HBW mm (¾”) J at -40°C (Ft-lb at -40°F) for 20 mm (¾”) mm (inches)
40-70
Hardox® 400 Bar 400 45 (33) 0.58/0.37
(1.57-2 ¾)

HIGH VERSATILITY
The variety of dimensions makes Hardox® wear plate suitable for a wide range of designs and products. The outstanding qualities of the flat Hardox® wear plate gr
are also available in the form of tubes and round bars. The tubes extend service life when pumping abrasive materials such as wet concrete, soil, gravel and ore slu
Round bars are the hard-wearing choice in sieve buckets, for example.

All Hardox® products are clearly marked. A unique identification number is stamped on the plates and sheets for traceability. Other data such as dimensions, serial
number and heat number are printed before delivery.

Knowing your product’s unique identity makes workshop processing and quality control so much easier. The identifying marks also come in handy when storing sma
pieces of Hardox® steel for later use.
Details compliments of
37
 Properties

Toughness *
Toughness *
Toughness *
Toughness *
Toughness *

Hardness [HBW]
Hardness [HBW]
Hardness [HBW]
Hardness [HBW]
Hardness [HBW]

Thickness Range (mm)

Thickness Range (mm)
Thickness Range (mm)
Thickness Range (mm)
Thickness Range (mm)

Yield Strength [MPa] (Typical)

Yield Strength [MPa] (Typical)
Yield Strength [MPa] (Typical)
Yield Strength [MPa] (Typical)
Yield Strength [MPa] (Typical)

Applications

Dimension Range
600
550
500
500
450

8-19
6-65
8-65
1400
1250

2-103
0.7-130

60 HRC
4.0 - 25.4
1250-1400

30 J/ -40 o C
27 J/ -20 o C
37 J/ -40 o C
50 J/ -40 o C
Specification

Hardox® 450 is available in thicknesses of 3.2 - 130 mm (1/8 -

abrasion-resistant, combines
5.12") as plate, as sheet in thicknesses 2.0 - 8.0 mm (0.079 -
good bendability and
0.315") and as CR sheet in thicknesses 0.7 - 2.1 mm (0.028 -
450

weldability with guaranteed

390-475

0.083"). For thicknesses over 80 mm (3.15") the preferred width is

impact toughness
1650 mm (64.96").
Hardox® 500 plate is available in thicknesses of 4.0 – 103 mm
(5/32 - 4.06"), and Hardox® 500 sheet in thicknesses of 2.0 - 6.5
Suitable for applications that
mm (0.079 - 0.256"). Hardox® 500 plate is available in widths up
demand higher wear
500

to 3350 mm (131.89") and lengths up to 14630 mm (575.98").

470-540

resistance
Hardox® 500 sheet is available in widths up to 1650 mm (64.96")
and lengths up to 16000 mm (62.92").
high strength, extreme
Hardox® 500 Tuf is available in thicknesses of 4.0 – 25.4

Details compliments of SSAB

hardness and guaranteed
mm. Hardox® 500 Tuf is available in widths up to 3350 mm and
toughness in one and the
500 Tuf

lengths up to 14630 mm.

475 - 505

same wear plate.

close to Hardox® 500,

Hardox® 550 is supplied in plate thickness of 8.0 – 65 mm, up to
increases wear life but not at
550

2900 mm in width and up to 14630 mm in length.

525-575

the expense of crack integrity.

HARDOX® WEAR PLATE FOR EXTREME ABRASION RESISTANCE

Hardox® 600 is available in thicknesses of 6 – 65 mm. Hardox® extreme wear conditions, can
600 is available in widths up to 2000 mm and lengths up to 14630 cut and welded, an excellent
600

mm. Preferred dimensions are 2000 x 4000 mm, other dimensons choice for high-performance
550-640

on request. applications

nominal hardness of 60 HRC,

Hardox® Extreme is supplied in plate thickness of 8 – 19 mm, up applications with extreme
to 2000 mm in width and up to 14630 mm in length, high demands on abrasion
preferred widths are 2000 x 4000 mm, other width on request.
Extreme
Hardox®

resistance like liner plates,

57-63 HRC

38 etc.
39

Properties

Toughness *
Toughness *
Toughness *
Toughness *
Toughness *

Hardness [HBW]
Hardness [HBW]
Hardness [HBW]
Hardness [HBW]
Hardness [HBW]

Diameter Range (mm)

Diameter Range (mm)

Thickness Range (mm)

Thickness Range (mm)
Thickness Range (mm)
Thickness Range (mm)
Thickness Range (mm)

Yield Strength [MPa] (Typical)

Yield Strength [MPa] (Typical)
Yield Strength [MPa] (Typical)
Yield Strength [MPa] (Typical)
Yield Strength [MPa] (Typical)

Applications

Dimension Range
3-6
3-6

350
850
400
500
400
400

1100

4.7-51

40-160
30-133
30-133
40-100
1000-1100

40 J/ -40 o C
60 J/ -40 o C
45 J/ -40 o C
Specification

versatile, ready-to-use, abrasion-

Hardox® 400 Bar is available in diameters of 40 to 100 mm. resistant that combine high
bars

Maximum available length depends upon product diameter. toughness, good bendability and
370 - 430

weldability.
Hardox® Round

outstanding performance when

you need both high wear
360-440

resistance and a lighter product.

Details compliments of SSAB

hard and tough, outstanding
performance for both high wear
470-530

resistance and lighter products

Hardox Wear Plates (Typical)

wear plate that provides a

HARDOX® WEAR PLATE FOR EXTREME ABRASION RESISTANCE

Hardox® HiTemp is available in thicknesses of 4.7 – 51.0 mm.

solution for wear resistance at
Hardox® HiTemp is available in widths up to 3350 mm and
high temperatures in the
375-425

lengths up to 14630 mm.

300–500°C range
Hardox® Tube 400 Hardox® Tube 500 Hardox® HiTemp

Hardox® HiTuf is available in thicknesses of 40 – 160 mm.

structural wear parts like thick
Hardox® HiTuf is available in widths up to 3350 mm and lengths
cutting edges, demolition tools
up to 14630 mm. For thicknesses over 125 mm preferred width is
310-370

and rippers
1650 mm.
Hardox® HiTuf

3366
 When you need steel plate processed, we offer profile cut Laser/Plasma,
bevelling, drilling, counter sinking, tapping, pressing and bending.

Flame Profile Cutting Plasma Profile Cutting Bevelling Plate Edges

Steel Plate Drilling. Countersinking Drilled Holes Tapping Drilled Holes

Section Rolling Options.

Ordering Suggestion.
Ordering Suggestion.
To assist us in supplying you the correct rolled sections
please tick the appropriate shape above, photocopy
this page and forward the suggestion with your order.

Section shapes compliments of

40
 Steel Plates - Structural Steel.
International Standard Comparisons.
MPa
Structural Plate - International Standards.
Australian European * British * German * Japanese American International Tensile
AS 3678 EN10025 BS 4360 DIN17100 JIS ASTM ISO 630 Strength
MPa
St33 290
200 300
A283A Fe310-0 310

G3101-SS330 330

40A, B, St37-2 Fe360A,

S235JR A283B 360
C, D St37-3 B, C, D
A283C 380
G3101-SS400 A36,
G316-SM400 A573-400 400
A, B, C
250 S275JR St44-2 A283D
250L15 S275JO St44-3 A284C, D
410
S275J2G3 A529
S275J2G4 A572-290
300 Fe430B, 43A, A633A Fe430A,
430
300L15 C,D1, D2 B, C, D B, C, D
350 A573-450
450
350L15 A572-345
400, S355JR A573-485
400L15 S355JD 480
S355J2G3
G3101-SS490 Fe510
50A, S152-3 G3106-SM490 B, C, D
B, C, D A, B, C 490
G3106-SM490
YA, YB
450 G3106-SM520 A572-415 Fe510
520
450L15 B, C B, C, D
G3101-SS540 540

1. This table indicates the approximate relationship between Australian grades and their International counterparts.
2. Grades are shown in their increasing tensile strength order. In the case of American ASTM Standards some grades are shown
in increasing yield strength (YS) order, as their position in the hierarchy is different when based on the yield strength compared
to tensile strength (TS).
* En10025 has replaced BS4360 and DIN17100 Standards.
3. For grades with suffix letters C, D on British, European and International Standards, B, C, on Japanese Standards and
suffix numbers 2 and 3 on German Standards, the appropriate Australian alternative is the nearest L15 grade of the
equivalent strength level (i.e. High or Medium).
4. Grades readily available are highlighted in black.
5. The grade/s within the same shaded band show generally acceptable alternatives, provided relevant design factors
are considered.
6. This graph is designed for customers to determine the nearest available Australian grade to an international specification.
41
Steel Plates - Boiler Plates.
International Standard Comparisons.
MPa
Boiler Plate - International Standards.
Tensile Australian European * British * German * Japanese American International
Strength AS 3678 EN10025 BS 4360 DIN17100 JIS ASTM ISO 630
(MPa)
310 A285-A
340 A285-B
2-P235GH 151-360 H1 P235
360 161-360
164-360
A285-C
380 A442-55
A515-55
A516-55
390 3-P275N#
151-400 H11 G3103-SB410 A682-A P265
161-400 G3115-SPV235
400
164-400 G3118-SGV410
224-400 G3126-SLA235
410 2P265GH G3118-SGV410 P265
A515-65
415
A518-60#
430 7-430
440 G3126-SLA325
G3118-SB450 A515-65
450
G3118-SGC450 A516-65
460 7-460 2-P295GH# A662-B* P290
G3103-SB480
480
G3118-SGV480
7-490 224-490 19Mn6 G3115-SPV315 A515-70 P315
490 A516-70#
A841.
5-490 3-P355GH# G3126-SLA360 A537-C11 P315
490 A737-B
A841
510 2-P355GH# P355
G3115-SPV355 A299
520 A455
A738-A

1. This table indicates the approximate relationship between Australian grades and their International counterparts
2. Grades are shown in their increasing tensile strength order. AS1548-5-490 & equivalent grades have a higher minimum yield
strength requirement than the corresponding AS1548-7-490 & equivalent grades.
3. Grade equivalence shown is based on room temperature tensile properties only.
4. Grades readily available are highlighted in black.
5. It may be possible to substitute readily available grades for international grades outside the designated band shown,
provided relevant design factors are considered.
6. # These overseas grades may be available subject to enquiry.
42
Hot Rolled S
Steel
teel Sheet. Hot Rolled Steel Sheet.
Specification - Hot Rolled Sheet - AS/NZS1594 - 2002.
Sheet Available Widths. kg per Colour
Thickness 895 900 910 1195 1200 1210 1495 1500 1510 1800 m² Coding
1.50 9 9 11.77 Purple
1.60 9 9 9 9 12.56 Purple
1.95 9 9 9 9 15.3 Yellow
2.40 9 18.84 Pink
2.50 9 9 9 9 19.63 Pink
2.90 9 9 22.77 Blue
2.95 9 9 9 23.16 Blue
3.00 9 9 9 9 9 9 23.55 Blue
Meets both:- AS/NZS 1594: 2002 and AS/NZS 1365: 1996 Skin-passed, Hot-rolled low carbon steel suitable for forming, bending and welding operations.
Some Uses include:- Tanks, Shelving and some Light Structural members.

Hot Rolled Pickled HA3-P Ly-Ten® Sheet.

Specification - Hot Rolled Sheet - AS/NZS1594 - 2002.
Hot rolled, formable steel sheet suitable when pickled for medium drawing and heavy Sheet Available Widths. kg per Colour
pressing operations. Thickness 910 1210 m² Coding
Some Uses include:- Agricultural machinery 1.6 9 12.56 Purple
Automotive parts and components 2.0 9 9 15.7 Yellow
Mower parts 2.5 9 19.63 Pink
Brackets 3.0 9 23.55 Blue
Furniture 4.0 9 31.4 Green
5.0 9 39.25 Orange
6.0 9 47.1 White

Cold Rolled CA3SN-G Sheet.

Specification - Cold Rolled Unalloyed Sheet - AS/NZS1595:1998.
Cold rolled, Skin-passed deep drawing steel guaranteed non-aging and free from Sheet Width kg per Colour
stretcher strain with a general purpose surface. Thickness 1220 m² Coding
Some Uses include:- Unexposed drawn parts for automotive and appliance 0.6 9 4.71 No Colour
end uses. 0.8 9 6.28 Black
1.0 9 7.85 White
1.2 9 9.42 Yellow
1.5 9 11.78 Purple
1.6 9 12.56 Purple
2.0 9 15.70 Yellow
2.5 9 19.63 Pink
3.0 9 23.55 Blue
Customers often ask us about the differences between hot rolled steel and cold rolled steel.
Hot Rolled
Hot rolling is a mill process which involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel’s recrystallization
temperature. When steel is above the recrystallization temperature, it can be shaped and formed easily, and the steel can be made in much larger sizes. Hot rolled steel
is typically cheaper than cold rolled steel due to the fact that it is often manufactured without any delays in the process, and therefore the reheating of the steel is not required
(as it is with cold rolled). When the steel cools off it will shrink slightly thus giving less control on the size and shape of the finished product when compared to cold rolled.
Uses: Hot rolled products like hot rolled steel bars are used in the welding and construction trades to make railroad tracks and I-beams, for example.
Hot rolled steel is used in situations where precise shapes and tolerances are not required.
Cold Rolled
Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room
temperature) followed by annealing and/or tempers rolling. This process will produce steel with closer dimensional tolerances and a wider range of surface finishes.
The term Cold Rolled is mistakenly used on all products, when actually the product name refers to the rolling of flat rolled sheet and coil products.
All cold products provide a superior surface finish, and are superior in tolerance, concentricity, and straightness when compared to hot rolled.
Uses: Any project
project where tolerances,s, surface
s condition,, concentricity,
co ity, and straightness
straigh
aightness are the major
aigh jor factors.
43
 VABOND ®steel
GALVABOND
GALV
GALVABOND steelSheet.
Sheet. ®

GALVABOND® steel Sheet - AS 1397: 2011

Also meets AS/NZS 1365: 1996 (Tolerances for flat Thickness Available Widths. kg/ Colour
rolled steel products). mm 915 1200 1220 1500 1525 m² Coding
0.40 9 9 3.43
9

No Colour
AS 1397: 2011 covers contiguous hot-dip metallic coated 0.45 3.82
steel sheet and strip - Coatings of zinc and zinc alloyed with 0.50 9 4.22
aluminium and magnesium. 0.55 9 9 9 9 4.61
0.60 9 5.00
Galvabond G2 steel is a hot-dipped zinc-coated commercial 0.70 9 5.79
forming steel with a spangled surface, suitable for general 0.75 9 9 9 6.18
manufacturing. Product is suitable for moderate drawing 0.80 9 6.57 Black
applications and is suitable for lock seaming up 0.90 9 9 7.36
to 1.6mm thick. 0.95 9 9 9 7.75
Typical lock seam finish. 1.00 9 9 8.14 White
1.10 9 9 8.92
1.15 9 9 9 9 9.32
1.20 9 9.71 Yellow
1.50 9 9 9 12.07
1.55 9 9 9 12.46
Typical Uses include:- 1.60 9 12.85 Purple
Tube Partitioning systems 1.90 9 15.21
Air-conditioning ducts Cable trays 1.95 9 9 15.59 Orange
Air-conditioning panels Scaffolding planks 2.40 9 19.13
Meter boxes Rendering mesh 2.45 9 19.52 Pink
Trailers Feeder troughs 2.90 9 23.06 Blue

Not all colour codes may be available for alternate thicknesses.

ZINCANNEAL® sheet.
Zincanneal Sheet G2S ZF100 AS 1397: 2011
Also meets AS/NZS 1365: 1996 (Tolerances for flat Thickness Available Widths. kg/ Colour
rolled steel products). mm 915 1050 1200 1220 m² Coding
0.50 9 4.06
No Colour
AS 1397: 2011 covers contiguous hot-dip metallic coated 0.55 9 4.45
steel sheet and strip - Coatings of zinc and zinc alloyed with 0.70 9 5.63
aluminium and magnesium. 0.75 9 6.02
0.80 9 6.41 Black
Zincanneal G2S is a matte hot-dipped zinc/iron alloy-coated 0.90 9 9 7.19
commercial forming steel with a skin-passed smooth surface 0.95 9 9 7.59
suitable for direct-on painting. 1.00 9 7.98 White
Some powdering of the coating may occur with severe 1.10 9 9 9 8.77
deformation. 1.15 9 9 9.16
1.20 9 9.55 Yellow
Typical Uses include:- 1.40 9 11.12
Exposed painted panels Acoustic ceiling tiles 1.50 9 9 9 11.91
Non-exposed automotive Commercial fridges and 1.55 9 12.29
panels freezers 1.60 9 12.69 Purple
Washing machines Door frames 1.90 9 15.05
Switchboards 1.95 9 15.44 Orange
While all details are correct at time of printings, details are subject to change without prior notice.
44
 Aluminium Sheets, Plate and Treadplates - Gr 5005 ,5052 ,5083 and 5005 0 (5Bar).
Size t Mass/sh Mass/sh Mass/sh Mass/sh
Grades and Uses.
mm x mm mm 5005 H34 5052 H32 5083 H321 Treadplates
Grade 5005 H34 Sheet 1200 x 2400 0.60 4.683 n/a n/a n/a
A general purpose alloy, suitable for 1200 x 2400 0.80 6.244 n/a n/a n/a
a range of sheet metal applications. 1200 x 2400 1.00 7.805 n/a n/a n/a
Corrosion resistance - Excellent 1200 x 3600 1.00 12.001 n/a n/a n/a
Anodising - Very Good 1200 x 2400 1.20 9.366 9.599 n/a n/a
Forming - Excellent 1200 x 3000 1.20 12.000 n/a n/a n/a
Machining - Poor 900 x 1800 1.60 7.199 n/a n/a n/a
Welding (Argon) - Excellent 1200 x 2400 1.60 12.488 12.488 n/a 13.577
A typical size range is listed. 1200 x 3000 1.60 15.610 n/a n/a n/a
Grade 5052 H32 Sheet 1200 x 3600 1.60 18.732 n/a n/a n/a
Used in marine applications, sheet 1200 x 2400 2.00 15.610 15.61 n/a 17.122
metal work and appliances. 1200 x 3000 2.00 19.512 n/a n/a n/a
Corrosion resistance - Excellent 1200 x 3600 2.00 24.000 n/a n/a n/a
Forming - Good 1500 x 3600 2.00 30.002 n/a n/a n/a
Welding (Argon) - Excellent 1200 x 2400 2.50 19.512 19.512 n/a 21.845
Grade 5083 H321 Plate 1200 x 6000 2.50 n/a 50.004 n/a n/a
Used in high strength structural 1500 x 2400 2.50 n/a 24.39 n/a n/a
applications, sheet and plate for 900 x 1800 3.00 13.499 n/a n/a n/a
welded marine applications and 1200 x 2400 3.00 23.414 23.414 23.99904 25.978
road transport vehicles. 1200 x 3000 3.00 30.000 n/a n/a n/a
Corrosion resistance - Excellent 1200 x 3600 3.00 35.122 n/a n/a 38.963
Forming - Good 1200 x 6000 3.00 n/a 59.71 n/a 67.996
Welding (Argon) - Excellent 1200 x 6100 3.00 n/a n/a 60.99756 n/a
1525 x 6100 3.00 n/a n/a 77.521 n/a
1200 x 2400 4.00 31.219 n/a 32.000 n/a
1200 x 6100 4.00 n/a n/a 81.3252 n/a
1525 x 6100 4.00 n/a n/a 103.3508 n/a
2200 x 10000 4.00 n/a n/a 244.42 n/a
1200 x 2400 5.00 39.024 n/a 40.00032 40.738
1200 x 6100 5.00 n/a n/a 101.6675 n/a
1525 x 6100 5.00 n/a n/a 129.2024 n/a
Grade 5052 0 (5 Bar) Plate 1830 x 6100 5.00 n/a n/a 155.0429 n/a
Aluminium Treadplates. 2200 x 10000 5.00 n/a n/a 305.558 n/a
A wide variety of diverse applications. 1200 x 2400 6.00 46.829 n/a 48.0096 49.001
Step treads, shop floors, marine 1200 x 3600 6.00 n/a n/a n/a 73.505
foot traffic, decorative bar fronts. 1200 x 6000 6.00 n/a n/a n/a 101.840
Corrosion resistance - Excellent 1200 x 6100 6.00 n/a n/a 122.0024 n/a
Workability - Good 1525 x 6100 6.00 n/a n/a 155.0448 n/a
Welding (Argon) - Excellent 1830 x 6100 6.00 n/a n/a 186.0537 n/a
2200 x 10000 6.00 n/a n/a 366.674 n/a
1200 x 2400 8.00 n/a n/a 63.99936 n/a
1830 x 6100 8.00 n/a n/a 248.0642 n/a
1200 x 2400 10.00 n/a n/a 80.00064 n/a
1200 x 6000 10.00 n/a n/a 200.0 n/a
1200 x 2400 12.00 n/a n/a 95.99904 n/a
1200 x 2400 16.00 n/a n/a 127.9987 n/a
1200 x 2400 20.00 n/a n/a 160.0013 n/a
1200 x 2400 25.00 n/a n/a 199.9987 n/a
45