目录

CONTENTS

A Materials 002

B General Turning 015

C Parting and Grooving 119

D Milling 129

E Shim 170

F Technical Information 177

001

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A1 Properties coating grades overview 003

A2 Features of cemented carbide overview 009

A3 Features overview of cermet 011

A4 Recommended grade overview for carbide insert 012

002

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A1
A1-1 CVD CVD coating

Grade ISO classification Color Recommend for application A

Materials
Black CVD coated carbide is extremely hard substrate and extremely thick, smooth, wear-resistant coating.
BPC052 K10(K05-K20)
Recommended for nodular cast iron high-speed turning.

CVD-coated cemented carbide, the hard substrate coated with a smooth and wear-resistant coating,
K15(K10-K25) Black can bear harsh intermittent cutting conditions.
BPC102
Universal grade for all cast iron roughing cutting at low to medium speed.

S05(S05-S15) CVD coated carbide. For stainless steel, heat-resistant alloys, non-ferrous metals finishing, semi-finishing
Yellow
BPC103
H05(H10-H15) at high speed, or continue cutting long time at low cutting speed.

Black CVD coated carbide grade for gray cast iron semi-finishing to roughing milling, mainly used in dry conditions.
BPC202 K15-K25
Having a long expected tool life in the medium to high cutting speeds.

With good abrasive Wear-resistant coated carbide grade for steel in moderate to high-speed rough milling.
P20(P10-P40)
Cast iron milling, such as ductile cast iron, wet conditions or high tensile strength cast iron.
Black
BPC402 K30(K25-K40) Under low to medium cutting speed the cutting tools can have a long tool life.
H25(H20-H30) For hardened steel roughing milling in good condition at low-speed.

CVD coated carbide. Great heat resistance and mechanical shock resistance.
P35(P25-P40)
Yellow For steel interrupted cutting, austenitic stainless steels and duplex stainless steel semi-finishing to roughing at medium
BPG253
M25(M15-M35) cutting speed.

P25(P10-P30) Thin CVD coated micro grain carbide. For low-carbon, low-alloy steel, and other "sticky" alloy steel finishing at
Black/yellow
BPG251 K25(K15-K30) medium to low cutting speeds. Good performance When high surface quality or sharp cutting condition needed.
M20(M10-M25) The thermal shock resistance makes it suitable for light interrupted cutting.

003

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A1
A1-1 CVD coating

A Grade ISO classification Color Recommend for application

Materials

High-strength matrix CVD coating grade. For steel and cast steel roughing in bad conditions.
P45(P30-P50)
BPG363 Yellow Can work at low speed overload interrupted cutting. For stainless steel and stainless steel castings difficult to
M35(M25-M40) machine epidermal processing and heavy interrupted cutting at low to medium cutting speed.

Black/yellow CVD coated carbide grade, high-strength alloy substrate with thick wear-resistant coating. Machining steel and
BPS351 P35(P25-P45)
cast steel in bad conditions. Edge line security for interrupted cutting high metal removal rate.

P15(P05-P25) CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both
Black/yellow good hardness, toughness. Can bear high temperatures. For steel and steel castings finishing to roughing processing,
BPS101 K15(K10-K25)
Continue cutting to light interrupted cutting. Machining of gray and ductile iron at low to medium cutting speed.
H15(H05-H25) For hard materials continuous cutting and light interrupted cutting from finishing to roughing. Wet and dry processing.

P20(P10-P25) Coated carbide grade can bear high temperature, suitable for steel milling.
Black/yellow The dry machining grade has high chip removal rate. Cast iron at medium cutting speed light to heavy milling;
BPS201 P20(P10-P25)
hardened steel light rough processing under bad condition.
H25(H15-H30)

P25(P15-P35) Black/yellow CVD coated carbide grade, Universal grade, suitable for steel and cast steel continuous cutting and interrupted cutting
BPS251 finishing to roughing. Grades with a wide range of applications. Stainless steel continuous cutting and interrupted cutting.
M15(M05-M25)

CVD coating, resistance to high-temperature substrate with wear-resistant coating.

P25(P20-P30) Yellow Carbon steel and other "sticky" alloy materials finishing process to light roughing process.
BPG153 When combining with sharp stainless steel chip breaker, can obtain good surface quality and a brisk cutting action.
M15(M05-M25)
For stainless steel finishing and light roughing at medium to high cutting speed.
Preferred for continuous cutting.

004

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A1
A1-1 CVD coating

Grade ISO classification Color Recommend for application A

Materials
P30(P25-P40) Coated carbide grade for unalloyed and low-alloy steel from light to heavy milling both wet and dry machining.
Black/yellow Suitable for face milling, shoulder milling. Ductile iron and light to heavy milling. Martensitic stainless steel,
BPS301 P30(P25-P40)
light to heavy milling.
M30(M25-M35)

Toughness coated carbide grade for steel milling in demanding process. For vertical milling and shoulder milling,
P40(P35-P50) Black/yellow other toughness processing best choice. Suitable for mixed materials small batch production. Toughness demanding
BPS401
operating conditions to work at low speed, medium load and reload processing. Stainless steel castings heavy
M40(M30-M40)
machining process.

High toughness of the MT-CVD-coated cemented carbide, for high toughness stainless steel milling, medium-speed
M45(M30-M45) Yellow
BPT403 machining cast parts, ferritic / martensitic stainless steel and PHsteel. Also be used for small volume production of the
S35(S25-S45) mixed material. For titanium alloy long time milling under bad condition.

TiN layer

wear resistant layer

Special transition layer, strengthen the binding force

CVD coating

Column TiCN layer

The substrate surface cobalt rich-in processing

The hard matrix , ensures high hardness,

resistance to plastic deformation

005

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A1
A1-2 PVD coating

A Grade ISO classification Color Recommend for application

Materials

CVD coated carbide grade for gray cast iron and ductile cast iron semi-finishing to roughing milling, mainly used
Purple yellow in dry conditions.
BPG108 K05-K15
Under low to medium cutting speed the cutting tools can have a long tool life.

P30(P15-P35) PVD coated carbide grade have good ability to avoid built-up edge and good resistance to plastic deformation capacity.
M15(M10-M25) Purple yellow For unstable conditions, such as long cutting edge, clogging, deep shoulder milling, long overhang, milling processes.
BPG308 Light milling of stainless steel; combine grinding blade for viscous and hardening materials; moderate speed milling of
S15(S15-S30)
heat resistant alloys; hardened parts milling at low feed and medium-speed.
H10(H10-H20)

Containing 6% Co ultrafine grain substrate has high adhesion strength with thin PVD TiAlN coating, with fever rigid
M10(M05-M15)
BPT056 reddish brown and good resistance to plastic deformation and flank wear ability. Suitable for stainless steel and heat-resistant alloys
S15(S05-S15) finishing at high speed.

P25(P15-P30)
PVD coated micro-grain carbide. Excellent ability to wear and thermal shock resistant trench, Anti-dust accumulation
in harmartoma and resistance of plastic deformation capacity, For low carbon steel and "sticky" alloy steel finishing,
M15(M10-M20)
Yellow also suitable for intermittent cutting. Low-speed machining of heat-resistant alloys, or light interrupted cuts; the steel
BPG20A
S15(S10-S25) light milling; surrounding grinding blade for viscous material, such as low carbon steel. Stainless steel Lightweight milling.
The peripheral-edge grinding blade for viscosity and hardening materials. Medium speed milling of heat resistant super
H15(H10-H20) alloys. The low feed speed milling of hardened parts.

M25(M15-M30) PVD coated carbide grade for medium to high-speed stainless steel (austenitic) milling. Combined with positive rake
Yellow
BPG30A
S20(S15-S25) angle trough also applies to the heat-resistant materials and titanium alloys.

P30(P15-P45) PVD coated micro-grain carbide. Can provide a sharp cutting action and excellent toughness of the cutting edge,
M25(M10-M30) a good anti-the grooves wear and thermal shock resistance. For carbon steel finishing at low feed rate or low cutting
Purple yellow
BPG318 speed. a variety of stainless steel finishing at low to medium cutting speed, but also suitable for light interrupted cutting.
S25(S20-S30)
Low-speed machining of heat resistant alloys, or light interrupted cuts. General short contact time processing step and
N25(N15-N30) high strength requirements of sharp cutting edges processing step.

006

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A1
A1-2 PVD coating

Grade ISO classification Color Recommend for application A

Materials
M25(M10-M30) Reddish brown Using high strength, high wear resistance and owe loss Phase Equilibrium ultrafine grain substrate with PVD TiAlN
BPU206 coating, suitable for most of the material machining, can achieve a stable turning and milling.
P20(P15-P35)

DLC coating color, the coating can reduce BUE, obtain higher surface quality. Suitable for aluminum, magnesium,
BPU109 N10(N01-N15)
copper, brass, plastic finishing to roughing processing.

Ultra-fine grain matrix with PVD coating, for milling at high speed under stable condition. Suitable for the requirements
M25(M15-M35) Green dark gray of the edge line security and high reliability applications, such as viscous austenitic and duplex stainless steel materials
BPT30B
S25(S15-S30) processing, preferred dry, but also applies to wet. For titanium milling, extremely sharp cutting edges with fatigue
resistance, resistance to micro-chipping, suitable for long time cutting at high speed.

P10(P05-P15)
PVD coated carbide grade, suitable for the excellent working conditions. Has excellent abrasion resistance at high
P10(P05-P15)
Cyan-blue gray dark cutting speeds. Instability and vibration sensitive. For milling typical hardened steel and plastic mold steel, processing
BPU10B M10(M05-M10) hardness above HRC36. For gray cast iron and dark cast iron ball finish milling under excellent working conditions
S10(S05-S10) titanium milling.
H10(H05-H15)

Coating materials: TiAIN

Coating microhardness: HV3200

Coating temperature: 450-480℃, without effect on ultra-grained alloy substrate.

PVD coating

Coating failure temperature: 900℃, high heat resistance.

Guarantee the sharp cutting edge after coating.

007

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A1
A1-3 ISO packet

A ISO Clasification
Materials

BPG353 13.5 91.3

BPG318 Purple yellow

BPG251 /

BPS353

P15~P40 BPG318 Purple yellow

P01~P15 BPS051 14.9 92.5 2000

008

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A2 Features overview of cemented carbide

Materials

009

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A2 Features overview of cemented carbide

A
Materials

BK10

010

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A Materials

A3 Features overview of cermet

Materials
BN201

BN301

011

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 A
Materials

012
Steel Stainless steel Cast iron Non-ferrous metals

A4
ISO Standard
P01 P10 P20 P30 P40 M01 M10 M20 M30 M40 K01 K10 K20 K30 K40 N01 N10 N20 N30 N40
BPS051 BPG521
A
BPS101 BPC052
CVD coating BPG253
BPS251 BPC102
BPG353 BPS353

BPG20A
Materials

PVD coating
BPG318
BPG318

General turning
BN201 BN201 BN201
Cermet BN301 BN301 BN301

BK10 BU810
Cemented carbide
Recommended grade overview for carbide insert

BPS253

CVD coating BPS253

BPS363

[Link]
BPG20A BPT056 BPG20A
BPT15A
PVD coating BPG318
BPG318 BPG318
BPG318
BPU206

Chipbreaker

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
Cermet

Cemented carbide BU810 BU810

ventas@[Link]
 Steel Stainless steel Cast iron Non-ferrous metals
ISO Standard
P01 P10 P20 P30 P40 M01 M10 M20 M30 M40 K01 K10 K20 K30 K40 N01 N10 N20 N30 N40

BPS201
BPS301 BPG403 BPC201
CVD coating BPS411 BPT403
BPC402
BPS401

BPU206 BPT30B
BPG108
PVD coating
BPG308 BPU206

Milling
A4 Recommended grade overview for carbide insert

BN201 BN201 BN201

Cermet
BN301 BN301 BN301

BU820
Cemented carbide BU810

[Link]
Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
A
Materials

013

ventas@[Link]
Materials
A
 B General turning

B
B Cutting tools
General Turning

014

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General turning

B1 Turning inserts................................................... 015

B1-1 Turning inserts overview........................................... 016

B1-2 Description of chipbreaker.......................................... 019

B1-3 Recommended grade and chipbreaker................................. 027

B1-4 General turning inserts code key.................................... 030

B1-5 Inserts for processing steel......................................... 032

B1-6 Inserts for processing stainless steel................................ 051

B1-7 Inserts for processing castiron...................................... 060

B1-8 Aluminum processing.............................................. 069

B1-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 075

B1-10 Peeling inserts................................................... 076

B2 Cutting tools........ ............................................. 078

B2-1 Turning toolholders overview........................................ 078

B2-2 Extemal turning tools code key...................................... 080

B2-3 Extemal turning tools.............................................. 083

B2-4 Internal turning tools code key...................................... 106

B2-5 Internal turning tools...............................................108

015

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-1 Turning inserts overview

034 034 034 034 034 034 035 035

B
CNMG**-FW DNMG**-FW SNMG**-FW TNMG**-FW VNMG**-FW WNMG**-FW CNGG**L/R-S DNGG**L/R-S
General Turning

035 035 036 036 036 036 036 036

TNGG**L/R-S WNGG**L/R-S CCMT**-FW DCMT**-FW SCMT**-FW TCMT**-FW VCMT**-FW WPMT**-FW
Finishing of steel

037 037 037 038 038 038 038 038

CCGT**L/R-S CCGH**L/R-S DCET**L/R-S DCGT**L/R-S DPET**L/R-S SCGT**L/R-S SPGH**L/R-S SPGT**L/R-S

038 038 039 039 039 039 040 040

TCGT**L/R-S TPGH**L/R-S TPGR**L-S TPET**L-S TPGX**L-S VBET**L-S VBGT**L/R-S VCGT**L/R-S

040 040 040 040 040

VDGX**L/R-S VPET**L/R-S WPGT**L/R-S DCET**L/R-E TNGG**L/R-E

042 042 042 042 042 041 041 041

WNMG**-MD TNMG**-HQ CNMG**-MA TNMG**-MA WNMG**-MA CNMG**-MD DNMG**-MD SNMG**-MD

041 041 043 043 043 043 043 044

TNMG**-MD VNMG**-MD CNMG**-TM DNMG**-TM TNMG**-TM VNMG**-TM WNMG**-TM SNMG**L/R-N
Finishing of steel

044 044 044 044 045 045 045 046

SNGG**L/R-N TNGG**L/R-N VNGG**L/R-N WNGG**L/R-N CNGG**L/R-H DNGG**L/R-H VNGG**L/R-H CCMT**-MD
Semi

046 046 046 046 046 047 047 047

DCMT**-MD SCMT**-MD TCMT**-MD VCMT**-MD RCMT**MOE-R1 CPMH**L/R-N DCGT**L/R-N TPGH**L/R-N

047 047 048 048 048 048 048 048

VBGT**L/R-N WPGT**L/R-N CCET**L//R-E CCGT**L/R-E SPGT**L/R-E TPET**L/R-E TCGT**L/R-E DCET**L/R-E
Rough machining of steel、cast iron

049 049 049 049 049 050 050 050

CNMG**-RA DNMG**-RA SNMG**-RA TNMG**-RA WNMG**-RA CCMT**-RA DCMT**-RA SCMT**-RA

050
TCMT**-RA

016

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-1 Turning inserts overview

Finishing of stainless steel

053 053 053 053 054 054

B
CNMG**-SJ DNMG**-SJ SNMG**-SJ TNMG**-SJ VNMG**-SJ WNMG**-SJ

General Turning
055 055 055 055 055 055 056 056
CNMG**-LH DNMG**-LH SNMG**-LH TNMG**-LH VNMG**-LH VNGG**-LH WNMG**-LH WNGG**-LH CCMT**-FW DCMT**-FW

056 056 056

SCMT**-FW TCMT**-FW VBMT**-FW
Not embroidered steel semi finishing

057 057 057 057 057 057 057 057

CNMG**-SN DNMG**-SN SNMG**-SN TNMG**-SN VNMG**-SN WNMG**-SN CNMG**-HM TNMG**-HM

058 058 058 059 059 059 059 059

CNMG**-SA WNMA**-SA VNMG**-SA CCMT**-MD DCMT**-MD SCMT**-MD TCMT**-MD VCMT**-MD

059
RCMT**-R1
Finishing of cast iron

061 061 061 061 061 061 061 062

CNMG**-U DNMG**-U SNMG**-U TNMG**-U VNMG**-U WNMG**-U CNMG**-CX DNMG**-CX

062 062 062 063 063 063 063 063

SNMG**-CX TNMG**-CX WNMG**-CX CCMT**-FW DCMT**-FW SCMT**-FW TCMT**-FW VBMT**-FW
The semi-Finishing of cast iron

064 064 064 064

CCMT**-MD DCMT**-MD SCMT**-MD TCMT**-MD

064 064 065 065 065 065 065

VBMT** VCMT** RCMT**-R1 CNMG**-CQ DNMG**-CQ SNMG**-CQ TNMG**-CQ WNMG**-CQ

065
VNMG**-CQ
Rough machining of cast iron

066 066 066 066 066 067 067 067

CNMG**-RA DNMG**-RA SNMG**-RA TNMG**-RA WNMG**-RA CNMG**-GH DNMG**-GH SNMG**-GH

067 067 068 068 068 068 068

TNMG**-GH WNMG**-GH ** ** ** ** **

017

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-1 Turning inserts overview

070 070 070 070 070 070 071 071

B
CNGG**-LH DNGG**-LH SNGG**-LH TNGG**-LH VNGG**-LH WNGG**-LH CCGT**-LH DCGT**-LH
Aluminum processing
General Turning

071 072 072 072 072 073 073 073

SCGT**-LH TCGT**-LH VCGT**-LH VBGT**-LH RCGT**-LH DCGT**-LH2 TCGT**-LH2 VCGT**-LH2

073 073 073 073 073 074 074 074

VPGT**-LH2 VPET**-E CCGT**-LH3 DCGT**-LH3 TCGT**-LH3 VCGT**-LH3 DCGT**-LA VCGT**-LA
Inserts forprocessing wheel

075 075 075 075

GIPA7YZ-35V-1.2-LH GDMA840-LH MRGN**LH GIP600E-3.00-LH
Inserts for processing wheel

Turning inserts for bearing

Turning inserts for profile

076 076 075 077

LPUC LNUC RDMT**Y1 KNUX

076 076 077

XNGX LNGF KNUX-2

076 077
LNGF YNMX

018

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
A

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker

For finishing turning .

17° 0.10
With good chip control above all in steel
Operations: longitudinal turning, facing, back-turning and profiling. B

General Turning
4° Advantages: light cutting geometry, low cutting forces
suitable for slender Shafts, thin walled and unstably clamped components.
FW ap=0.3-1.5 mm Limitations: depth of cut and feed range.
(two-sides) M Components typically: axles, gears where good surface finish is a priority.
fn=0.07-0.5 mm/r

0.10
17°
4°

For medium turning

With broad capability for steel. .
0.18
15°

Operations: longitudinal turning, facing and profiling

Advantages: all-round, reliable giving problem-free machining.
7°

MD Limitations: depth of cut and feed and risk of overloading cutting edge.
Components typically: axles, hubs, gears, etc in steel.
ap=0.4-8.6 mm
M
fn=0.1-0.65 mm/r

0.18
15°
7°

For semi-finishing turning .

For medium turning of steel and cast iron;
22°

0.18 Procedures:Turning,facing and profiling.

MA Advantages:Suitable for general [Link] edge shape of blade
4°

ap=0.2-0.6 mm performance of Sharp cutting.

M ， cast iron parts.
fn=0.15-0.5 mm/r Typical parts:Ordinary steel parts and
22°

0.18
4°

019

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
A

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker

For semi-finishing machining;

B 0.2
For semi finishing turning Of steel.
Operations: turning, facing, profiling.
Advantages: all-round, easy chip-flow, special bulge close to the
General Turning

18°
3°

ap=1.5-4.5 mm nose radiusand big rake angle generate the cutting ability and low cutting force of chipbreaker
TM M
fn=0.2-0.5 mm/r Limitations: the depth of cutting and feed.
Typical parts: ordinary steel parts.

0.2 18°
3°

For rough turning 。 .

With high removal rate in steel with double and single sided insert alternatives.
22°

Operations: longitudinal turning, facing and profiling

0.3 Advantages: universal capability, double-sided insert geometry with high Roughing capability
contributing towards good machining economy.
Limitations: risk of overloading cutting edge, risk of insert
ap=0.7-15 mm movement in seat at high cutting data when used with lever-type toolholder.
RA M
fn=0.2-1 mm/r Components typically: axles, hubs, gears, etc. in steel.

0.3
22°

Used for finish turning;

Suitable for stainless steel and non-ferrous metals such as aluminum alloy materials processing;
Procedure: turning, car face;
Advantages: with a lower cutting force light cutting groove, reliability and versatility, achieved without
11°

fault cutting;
Limitations: the feed rate and cuttingdepth limitation of application scope;
ap=0.8-3.5 mm Typical parts: aluminum alloy parts.
LH M
fn=0.1-0.4 mm/r
8°

For finishing turning .

With good chip control, above all especially in stainless steel.
Operations: finishing operations generally.
Advantages: light cutting geometry with low cutting forces, good alternative for slender shafts,
15°

thin-walled and unstably clamped components. The positive geometry minimizes tendencies for
ap=0.1-1.5 mm built up edge, leading to good surface nish capability and long tool-life.
SJ M Limitations: depth of cut and feed rate.
fn=0.05-0.4 mm/r
Components typically: stainless steel components in general.
15°

020

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
A

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker

For medium-duty turning .

22°
0.27
With broad capability for stainless steel.
Operations: longitudinal turning, facing and profiling
Advantages: reliable giving problem-free machining.
B

General Turning
Limitations: can be affected by casting and forging skin as well as Intermittent cuts.
12° Components typically: stainless steel components in genera.
ap=0.5-8.5 mm
SN M
fn=0.12-0.65 mm/r
22°

0.27

12°

For Light to Medium cutting .

Exclusive chip breaker for cutting of cast iron.
Operations: turning, facing.
23°

0.2
Advantages: high cutting edge hardness, low cutting resistance force, easy chip-flow. Combined with
more abrasive grade can get better efficiency.
U
Limitations: the casting, forging and discontinuous cutting sensitive.
Typical parts : pieces of cast iron.
ap=1-4.0 mm
M
fn=0.15-0.5 mm/r
23°

0.2

For rough turning.

Gray and nodular cast iron.
Procedures:Turning,facing and profiling.
0.34
18°

Advantages: A wide range of rough machining of cast iron, provides good economy of machining.
GH Sypical parts:Parts of cast iron.

ap=1.0-8.0 mm
M
fn=0.3-0.85 mm/r

0.34
18°

For rough turning of grey and nodular cast-iron.

Operations: longitudinal turning, facing and to some extent profiling.
.
Advantages: broad application range for roughing.
0° Limitations: can generate high radial cutting forces which may effect component and clamping.
Components typically: cast-iron components in general.
ap=0.2-12.0 mm
无槽 M
fn=0.1-1.19 mm/r

0°

021

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
A

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker
For finish turning;

B
Gray and nodular cast iron.
Procedures:Longitudinal Turning,facing and profiling.
15° 0.10
Advantages:Light cutting groove with lower cutting [Link] many advantages for the machining
General Turning

of parts vibration sensitive and unstable [Link] turning the through hole, can provide a
6°

higher and more consistent quality of workpiece.

CX M ap=0.15-2.0 mm
Limitations: The depth of cutting and feed.
fn=0.08-0.30 mm/r
Sypical parts:Ordinary parts of cast iron.

0.10
15°
6°

For semi-finish turning;

Gray and nodular cast iron.
0.25
15°

Procedures:Longitudinal Turning,facing and profiling.

Advantages:Reliable giving trouble-free machining.
2°

CQ Limitations: Lower strength of Cutting edge in the intermittent cutting.

ap=0.2-6.0 mm Sypical parts:Ordinary parts of cast iron.
M
fn=0.15-0.50 mm/r

0.25
15°
2°

For semi-finishing machining, finish machining lathe

Applied to cast iron parts of the semi finish machining, finish machining lathe.
Procedure: turning, car face.
Advantage: through slots edge, flat groove provided good
0.1
25°

chip range, smooth chip removal, resistance to strong adhesion, processing is able to ensure the
surface quality and the precision of
ap=0.8-3.2 mm Limitations : used for processing of cast iron parts.
A G Typical parts : pieces of cast iron.
fn=0.18-0.38 mm/r

0.1
25°

For finishing, semi finish turning.

Ordinary steel non-ferrous metals and has wide application range.
Process: cutting, copying turning.
15°

Advantage: a sharp edge, small cutting resistance, smooth chip removal, with good chip
control force, has wide application range.
ap=0.6-2.0 mm Limitations: cutting edge has overload risk, cutting depth and feed rate restriction.
S G
fn=0.05-0.2 mm/r Typical parts: ordinary steel, non-ferrous metal parts.
15°

022

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
A

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker

For finish machining lathe.

25° Apply to steel finish machining lathe.
Procedure: turning, car face.
B
0.6

普通车削
General Turning
Advantage: a sharp edge, resistance to strong adhesion,processing size and high precision, good
surface quality, smooth chip removal.
16°

ap=0.8-2.6 mm Limitations: the cutting depth and feed rate.

E G
fn=0.1-0.25 mm/r Typical parts: ordinary steel parts.
25°

0.6
16°
20°

0.15

ap=0.3-1.2 mm
fn=0.03-0.18 mm/r
20°

0.15

023

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
B

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker

Apply to steel semi finish machining, finish machining lathe.

B 16° Procedure: turning, car face.

Edge: edge tough, resistant to strong adhesion,processing size and high precision, good surface
0.15 quality, smooth chip removal.
General Turning

Limitations: generally used only for ordinary steel parts general machining.
ap=0.6-3.6 mm Typical parts: ordinary steel parts.
N G
fn=0.2-0.36 mm/r
16°

0.15

For semi-finishing machining, finish machining lathe.

Apply to steel semi finishing.
Procedure: turning, car face.
25°

Advantage: a sharp edge, resistance to strong adhesion, processing size and high precision, good
surface quality, smooth chip removal.
ap=0.8-2.6 mm Limitations: the cutting depth and feed rate.
E G Typical parts: ordinary steel parts.
fn=0.1-0.25 mm/r
25°

Apply to steel finishing, semi finish turning.

Procedure: turning, car end and copying turning.
provided good range, small cutting resistance,
21°

sharp blade, smooth chip removal, has good processing dimensional accuracy and surface quality.
Limitations: the cutting speed.
ap=0.8-3.2 mm Typical parts : pieces of cast iron.
H G
fn=0.1-0.3 mm/r
21°

For finishing, semi finish turning;

Ordinary steel and low carbon steel and has wide application range;
Process: cutting, copying turning;
Advantage: a sharp edge, small cutting resistance, smooth chip removal, with good
15°

ap=0.6-2.3 mm
chip control force, has wide application range;
fn=0.05-0.18 mm/r
Limitations: cutting edge has overload risk, cutting depth and feed rate restriction;
Typical parts: ordinary steel, non-ferrous metal parts.
S G
15°

ap=0.8-2.5 mm
fn=0.06-0.2 mm/r

024

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
B

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker
For finishing turning with good chip control. above

B
all in steel 、stainless steel 、grey and nodular cast-iron.
Operations: turning, facing, profiling and back-facing.
Advantages: light-cutting, positive geometry giving small cutting forces for slender,

普通车削
General Turning
6°
thin-walled or unstably clamped components - typically : axles, shafts, hubs, and gears when good
surface finish is a priority.
ap=0.5-2.0 mm Limitations: depth of cut and feed.
FW M
fn=0.01-0.3 mm/r Typical parts: shaft, shaft, and gear hub, priority is given to the surface quality of parts.
6°

For medium-duty turning .

With broad capability for steel 、stainless steel、grey and nodular cast-iron.
Operations: turning, facing and profiling.
0.13 Advantages: all-round, reliable with problem-free machining.
24°

Limitations: depth of cut and feed, risk of overloading the cutting edge.
MD Components typically: axles, shafts, hubs, gears, etc.
8°

ap=0.2-4.5mm
M
fn=0.1-0.35 mm/r

0.13
24°
8°

For medium turning .

Of steel, stainless steel and cast-iron.
0.1 Operations : turning, facing and profiling.
Advantages: high reliability.
15°

ap=0.5-12.8 mm Limitations: chipbreaking through round insert shape.

R M Components typically: shafts, axles, etc.
fn=0.05-3.5 mm/r

0.1
15°

For rough turning .

With high removal rate in steel、stainless steel、grey and nodular cast-iron.
Operations: turning, facing and profiling.
Advantages: all-round, positive geometry giving good roughing capability with good balance
18°

0.15
between high removal rate and minimum vibration tendencies.
,
Limitations: depth of cut and feed, risk of overloading the cutting edge.
ap=0.2-4.5 mm Components typically: axles, shafts, hubs, gears, etc.
RA M
fn=0.1-0.35 mm/r ,
18°

0.15

025

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-2
B

Chip breaker Tolerance Recommended cutting parameter Chip breaker shape Features of chipbreaker

Used for finish turning.

B
Aluminum alloy and other non-ferrous metals.
Procedure: turning, car end and copying cutting.
27.5° Advantages: open positive rake angle groove in high
普通车削
General Turning

cutting speed cutting light. Used as far as possible the high cutting speed (high2500m / min ) can
obtain more production efficiency.
ap=0.1-5.0 mm Limitations : used for nonferrous metal material processing.
LH G
fn=0.03-0.5 mm/r Typical parts: ordinary aluminum parts.

27.5°

Used for finish turning.

Aluminum alloy and other non-ferrous metals.
21°

Procedure: turning, car end and copying cutting.

Advantages: open positive rake angle groove in high cutting speed cutting
light. Used as far as possible the high cutting speed can be obtained more production efficiency.
Limitations : used for nonferrous metal material processing.
ap=0.4-6.5 mm
LH2 G Typical parts: ordinary aluminum parts.
fn=0.13-0.6 mm/r
21°

.
2°

For finish turning

Gray and nodular cast iron.
ap=0.06-1.7 mm Procedures:Turning,facing and profiling.
CX M Advantages:Light cutting groove of positive rake angle can lower cutting [Link] for machining
fn=0.03-0.3 mm/r
the slender shaft, thin-walled parts and unstable clamping [Link] to the intersection of the hole,
reduce the collapse of the [Link] quality can be made uniform.
2°

Limitations: The depth of cutting and feed.

Sypical parts:Ordinary parts of cast iron.

026

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-3
PP Process steel

Chipbreaker
Process type Chip breaker Tolerance diagram Recommended cutting parameter CVD coating PVD coating

FW

B
M ap=0.3-1.5 mm、fn=0.07-0.5 mm/r BPS051、BPS101
(two-sides)

General Turning
N G

E G
Finishing

H G

S G

TM M ap=1.5-4.5 mm、fn=0.2-0.5 mm/r BPS101、BPS251 BPG20A、BPG318

MD M ap=0.4-8.6 mm 、fn=0.1-0.65 mm/r BPS101、BPS251 BPG20A、BPG318

N G

Semi-finishing E G

H G

S G

RA M ap=0.7-15 mm、fn=0.2-1 mm/r BPS353

Rough finish

N G

H G

Finishing E G

S G

FW M ap=0.5-2.0 mm、fn=0.01-0.3 mm/r BPS051、BPS101

N G BPG20A、BPG318

MD M ap=0.2-4.5mm、fn=0.1-0.35 mm/r BPS101、BPS251 BPG20A、BPG318

Semi-finishing

R M ap=0.5-12.8 mm BPS101、BPS251 BPG20A、BPG318

RA M ap=0.2-4.5 mm、fn=0.1-0.35 mm/r BPS353

Rough finish

027

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-3
M Process on stainless steel

ISO
Chipbreaker
Process type Chip breaker Tolerance diagram Recommended cutting parameter CVD coating PVD coating

B Finishing
LH M ap=0.8-3.5 mm、fn=0.1-0.4 mm/r BPG251
General Turning

SJ M ap=0.1-1.5 mm、fn=0.05-0.4 mm/r BPG251

MD M ap=0.4-8.6 mm、fn=0.1-0.65 mm/r BPG253 BPG318

Semi-finishing
SN M ap=0.5-8.5 mm、fn=0.12-0.65 mm/r BPG253 BPG318

RA M ap=0.7-15 mm、fn=0.2-1 mm/r BPS353

Rough finish

Chipbreaker
Process type Chip breaker Tolerance diagram Recommended cutting parameter CVD coating PVD coating

FW M ap=0.5-2.0 mm、fn=0.01-0.3 mm/r BPG251

Finishing

MD M ap=0.2-4.5mm、fn=0.1-0.35 mm/r BPG253 BPG318

Semi-finishing
R M ap=0.5-12.8 mm、fn=0.05-3.5 mm/r BPG253 BPG318

N Non-ferrous metals

Chipbreaker
Process type Chip breaker Tolerance diagram Recommended cutting parameter Carbide grade

LH M ap=0.8-3.5 mm、fn=0.1-0.4 mm/r BU810

Finishing

S G ap=0.8-2.5 mm、fn=0.06-0.2 mm/r BU810

Semi-finishing, finishing

Chipbreaker
Process type Chip breaker Tolerance diagram Recommended cutting parameter Carbide grade

LH G ap=0.1-5.0 mm、fn=0.03-0.5 mm/r BU810

Semi-finishing ,
roughing turning LH2 G ap=0.4-6.5 mm、fn=0.13-0.6 mm/r BU810

S G ap=0.6-2.0 mm、fn=0.05-0.2 mm/r BU810

Semi-finishing

028

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-3
K Process on cost iron

Chipbreaker
Process type Chip breaker Tolerance diagram Recommended cutting parameter CVD coating

Finishing
CX M ap= 0.06-1.7 mm、fn= 0.03-0.3 mm/r BPC052
B

General Turning
CQ M ap= 0.2-6.0 mm、fn= 0.15-0.5 mm/r BPC102

Semi-finishing
U M ap=1-4.0 mm、fn=0.15-0.5 mm/r BPC102

GH M ap=0.4-14 mm、fn=0.19-0.85 mm/r BPC102

RA M ap=0.8-7.5 mm、fn=0.25-0.7 mm/r BPC102

Rough finish

M ap=0.2-12.0 mm、fn=0.1-1.19 mm/r BPC102

Chipbreaker
Process type Chip breaker Tolerance diagram Recommended cutting parameter CVD coating

FW M ap=0.5-2.0 mm、fn=0.01-0.3 mm/r BPC052、BPC102

MD M ap=0.2-4.5mm、fn=0.1-0.35 mm/r BPC052、BPC102

Finishing

CX M ap=0.06-1.7 mm、fn=0.03-0.3 mm/r BPC052、BPC102

R M ap=0.5-12.8 mm、fn=0.05-3.5 mm/r BPC102

Semi-finishing

029

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-4

B
General Turning

tolerance range

030

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-4

General Turning

GH

031

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel Grades

P Process steel

a Grade for coating

Grade ISO classification Surface color Applications Recommended

B Black/yellow
General Turning

BPS051 P05(P01-P15)
CVD coated grade: stable conditions for steel semi-finishing to roughing can obtain high metal removal rate. Excellent resistance to crater wear
and plastic deformation resistance. Recommended for stable conditions. Wet and dry processing.

BPS101 P15(P05-P25) Black/yellow CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness.
For finishing to roughing processing on steel and steel castings. Continue cutting to light interrupted cuting. Can bear high temperatures.
Wet and dry processing.

BPS251 P25(P15-P35) Black/yellow

CVD coated carbide grade, with thick wear-resistance coating on the general gradient sintered substrate . For Finishing to roughing on steel and
cast steel. Good use for steel continuous cutting as well as interrupted cutting.

032

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-5 Inserts for processing steel Grades
P Process steel

c Grade for uncoating

General Turning

033

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

rake

Grade recommendation
Dimension（mm）
The basic shape of blade Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C Φd

BP10
BP20

YT14
YT15
S R

YW1
YT5
General Turning

090304-FW 9.525 3.18 3.81 0.4 ★ ★

090308-FW 9.525 3.18 3.81 0.8 ★ ★
CNMG
120404-FW 12.7 4.76 5.16 0.4 ★ ★
120408-FW 12.7 4.76 5.16 0.8 ★ ★
110404-FW 9.525 4.76 3.81 0.4 ★ ★
110408-FW 9.525 4.76 3.81 0.8 ★ ★
150404-FW 12.7 4.76 5.16 0.4 ★ ★
DNMG
150408-FW 12.7 4.76 5.16 0.8 ★ ★
150604-FW 12.7 6.35 5.16 0.4 ★ ★
150608-FW 12.7 6.35 5.16 0.8 ★ ★
120408-FW 12.7 4.76 5.16 0.8 ★ ★
120412-FW 12.7 4.76 5.16 1.2 ★ ★
SNMG

160404-FW 9.525 4.76 3.81 0.4 ★ ★

160408-FW 9.525 4.76 3.81 0.8 ★ ★
TNMG
220404-FW 12.7 4.76 5.16 0.4 ★ ★
220408-FW 12.7 4.76 5.16 0.8 ★ ★
160404-FW 9.525 4.76 3.81 0.4 ★ ★
160408-FW 9.525 4.76 3.81 0.8 ★ ★
VNMG

060404-FW 9.525 4.76 3.81 0.4 ★ ★

060408-FW 9.525 4.76 3.81 0.8 ★ ★
WNMG 060412-FW 9.525 4.76 3.81 1.2 ★ ☆
080404-FW 12.7 4.76 5.16 0.4 ★ ★
080408-FW 12.7 4.76 5.16 0.8 ★ ★

034

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-5 Inserts for processing steel
rake

Grade recommendation
Dimension（mm）
The basic shape of blade Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C Φd

BP10
BP20

YT14
YT15
S R

YW1
YT5

General Turning
090402L/R-S 9.525 4.76 3.81 0.2
090404L/R-S 9.525 4.76 3.81 0.4
CNGG
090408L/R-S 9.525 4.76 3.81 0.8

110402L/R-S 9.525 4.76 3.81 0.2

110404L/R-S 9.525 4.76 3.81 0.4
DNGG
110408L/R-S 9.525 4.76 3.81 0.8

110402L/R-S 6.35 4.76 2.4 0.2

110404L/R-S 6.35 4.76 2.4 0.4
110408L/R-S 6.35 4.76 2.4 0.8
TNGG
160402L/R-S 9.525 4.76 3.81 0.2
160404L/R-S 9.525 4.76 3.81 0.4
160408L/R-S 9.525 4.76 3.81 0.8
060402L/R-S 9.525 4.76 3.81 0.2
060404L/R-S 9.525 4.76 3.81 0.4
WNGG
060408L/R-S 9.525 4.76 3.81 0.8

035

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS051
BPS251

BN201
BN301
ΦI.C Φd α

BP10
BP20

YT14
YT15
S R

YW1
YT5
General Turning

060202-FW 6.35 2.38 2.8 0.2 7° ★ ★

060204-FW 6.35 2.38 2.8 0.4 7° ★ ★
09T302-FW 9.525 3.97 4.4 0.2 7° ★ ★
CCMT
09T304-FW 9.525 3.97 4.4 0.4 7° ★ ★
09T308-FW 9.525 3.97 4.4 0.8 7° ★ ★
120404-FW 12.7 4.76 5.5 0.4 7° ★ ★
070202-FW 6.35 2.38 2.8 0.2 7° ★ ★
070204-FW 6.35 2.38 2.8 0.4 7° ★ ★
DCMT 11T302-FW 9.525 3.97 4.4 0.2 7° ★ ★
11T304-FW 9.525 3.97 4.4 0.4 7° ★ ★
11T308-FW 9.525 3.97 4.4 0.8 7° ★ ★
09T304-FW 9.525 3.18 4.4 0.4 7° ★ ★
09T308-FW 9.525 3.18 4.4 0.8 7° ★ ★
SCMT

090202-FW 5.56 2.38 2.5 0.2 7° ★ ★

090204-FW 5.56 2.38 2.5 0.4 7° ★ ★
110302-FW 6.35 3.18 2.8 0.2 7° ★ ★
TCMT
110304-FW 6.35 3.18 2.8 0.4 7° ★ ★
110308-FW 6.35 3.18 2.8 0.8 7° ★ ★
16T304-FW 9.525 3.97 4.4 0.4 7° ★ ★
110302-FW 6.35 3.18 2.8 0.2 7° ★ ★
110304-FW 6.35 3.18 2.8 0.4 7° ★ ★
VCMT

040202-FW 6 2.38 2.5 0.2 11° ★ ★

040204-FW 6 2.38 2.5 0.4 11° ★ ★
WPMT

036

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-5 Inserts for processing steel
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS051
BPS251

BN201
BN301
ΦI.C Φd α

BP10
BP20

YT14
YT15
S R

YW1
YT5

General Turning
060202L/R-S 6.35 2.38 2.8 0.2 7°
060204L/R-S 6.35 2.38 2.8 0.4 7°
09T302L/R-S 9.525 3.97 4.4 0.2 7°
09T304L/R-S 9.525 3.97 4.4 0.4 7°
CCGT 09T308L/R-S 9.525 3.97 4.4 0.8 7°
120402L/R-S 12.7 4.76 5.5 0.2 7°
120404L/R-S 12.7 4.76 5.5 0.4 7°
120408L/R-S 12.7 4.76 5.5 0.8 7°

060202L/R-S 6.35 2.38 2.8 0.2 7°

060204L/R-S 6.35 2.38 2.8 0.4 7°
CCGH

070201L/R-S 6.35 2.38 2.8 0.1 7°

070202L/R-S 6.35 2.38 2.8 0.2 7°
070204L/R-S 6.35 2.38 2.8 0.4 7°
DCET
11T301L/R-S 9.525 3.97 4.4 0.1 7°
11T302L/R-S 9.525 3.97 4.4 0.2 7°
11T304L/R-S 9.525 3.97 4.4 0.4 7°

037

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG051
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C Φd α

BP10
BP20

YT14
YT15
S R

YW1
YT5
General Turning

070202L/R-S 6.35 2.38 2.8 0.2 7°

070204L/R-S 6.35 2.38 2.8 0.4 7°
DCGT
11T302L/R-S 9.525 3.97 4.4 0.2 7°
11T304L/R-S 9.525 3.97 4.4 0.4 7°
070201L/R-S 6.35 2.38 2.8 0.1 11°
070202L/R-S 6.35 2.38 2.8 0.2 11°
DPET
11T301L/R-S 9.525 3.97 4.4 0.1 11°
11T302L/R-S 9.525 3.97 4.4 0.2 11°
09T304L/R-S 9.525 3.97 4.4 0.4 7°
09T308L/R-S 9.525 3.97 4.4 0.8 7°
SCGT

090304L/R-S 9.525 3.18 4.4 0.4 11°

090308L/R-S 9.525 3.18 4.4 0.8 11°
SPGH
120304L/R-S 12.7 3.18 5.5 0.4 11°
120308L/R-S 12.7 3.18 5.5 0.8 11°
090304L/R-S 9.525 3.18 4.4 0.4 11°
090308L/R-S 9.525 3.18 4.4 0.8 11°
SPGT
120304L/R-S 12.7 3.18 5.5 0.4 11°
120308L/R-S 12.7 3.18 5.5 0.8 11°
110302L/R-S 6.35 3.18 2.8 0.2 7°
110304L/R-S 6.35 3.18 2.8 0.4 7°
TCGT

090202L/R-S 5.56 2.38 2.5 0.2 11°

090204L/R-S 5.56 2.38 2.5 0.4 11°
110202L/R-S 6.35 2.38 3.4 0.2 11°
110204L/R-S 6.35 2.38 3.4 0.4 11°
110302L/R-S 6.35 3.18 3.4 0.2 11°
TPGH
110304L/R-S 6.35 3.18 3.4 0.4 11°
110308L/R-S 6.35 3.18 3.4 0.8 11°
160302L/R-S 9.525 3.18 4.4 0.2 11°
160304L/R-S 9.525 3.18 4.4 0.4 11°
160308L/R-S 9.525 3.18 4.4 0.8 11°

038

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-5 Inserts for processing steel
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG051
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C Φd α

BP10
BP20

YT14
YT15
S R

YW1
YT5

General Turning
090202L/R-S 5.56 2.38 0.2 11°
090204L/R-S 5.56 2.38 0.4 11°
TPGR
090208L/R-S 5.56 2.38 0.8 11°

110301L-S 6.35 3.18 3.4 0.1 11°

110302L-S 6.35 3.18 3.4 0.2 11°
TPET

090202L-S 5.56 2.38 2.5 0.2 11°

090204L-S 5.56 2.38 2.5 0.4 11°
090208L-S 5.56 2.38 2.5 0.8 11°
TPGX
110302L-S 6.35 3.18 3.4 0.2 11°
110304L-S 6.35 3.18 3.4 0.4 11°
110308L-S 6.35 3.18 3.4 0.8 11°
110301L-S 6.35 3.18 2.8 0.1 5°
110302L-S 6.35 3.18 2.8 0.2 5°
VBET

039

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG051
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C S Φd α

BP10
BP20

YT14
YT15
R

YW1
YW2
YT5
General Turning

110301L/R-S 6.35 3.18 2.8 0.1 5°

110302L/R-S 6.35 3.18 2.8 0.2 5°
VBGT 110304L/R-S 6.35 3.18 2.8 0.4 5°
160402L/R-S 9.525 4.76 4.4 0.2 5°
160404L/R-S 9.525 4.76 4.4 0.4 5°
160404L/R-S 9.525 4.76 4.4 0.4 7°
160408L/R-S 9.525 4.76 4.4 0.8 7°
VCGT

160302L/R-S 9.525 3.18 4.4 0.2 15°

160304L/R-S 9.525 3.18 4.4 0.4 15°
VDGX

110301L/R-S 6.35 3.18 2.8 0.1 11°

110302L/R-S 6.35 3.18 2.8 0.2 11°
VPET

060304L/R-S 9.525 4.76 4.4 0.4 11°

060308L/R-S 9.525 4.76 4.4 0.8 11°
WPGT

070204L/R-E 6.35 2.38 2.8 0.4 7°

11T302L/R-E 9.525 3.97 4.4 0.2 7°
DCET
11T304L/R-E 9.525 3.97 4.4 0.4 7°

160404L/R-E 9.525 4.76 3.81 0.4 -

160408L/R-E 9.525 4.76 3.81 0.8 -
TNGG

040

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet

BPG05B
BPG10A
BPG20A
BPG153
BPG251

BPG318
BPC102

BPT15A
BPU206
BPS051
BPS101

BPS103
BPS251

BN201
BN301
ΦI.C S Φd R

General Turning
090304-MD 9.525 3.18 3.81 0.4 ☆ ★
090308-MD 9.525 3.18 3.81 0.8 ☆ ★
120404-MD 12.7 4.76 5.16 0.4 ☆ ★
120408-MD 12.7 4.76 5.16 0.8 ☆ ★
CNMG 120412-MD 12.7 4.76 5.16 1.2 ☆ ☆
160608-MD 15.875 6.35 6.35 0.8 ☆ ★
160612-MD 15.875 6.35 6.35 1.2 ☆ ☆
190608-MD 19.05 6.35 7.93 0.8 ☆ ★
190612-MD 19.05 6.35 7.93 1.2 ☆ ☆
110404-MD 9.525 4.76 3.81 0.4 ★ ★
110408-MD 9.525 4.76 3.81 0.8 ☆ ★
110412-MD 9.525 4.76 3.81 1.2 ☆ ☆
150404-MD 12.7 4.76 5.16 0.4 ☆ ★
DNMG 150408-MD 12.7 4.76 5.16 0.8 ☆ ★
150412-MD 12.7 4.76 5.16 1.2 ☆ ☆
150604-MD 12.7 6.35 5.16 0.4 ☆ ★
150608-MD 12.7 6.35 5.16 0.8 ☆ ★
150612-MD 12.7 6.35 5.16 1.2 ☆ ☆
090304-MD 9.525 3.18 3.81 0.4 ☆ ★
090308-MD 9.525 3.18 3.81 0.8 ☆ ★
120404-MD 12.7 4.76 5.16 0.4 ☆ ★
120408-MD 12.7 4.76 5.16 0.8 ☆ ★
120412-MD 12.7 4.76 5.16 1.2 ☆ ☆
SNMG
150608-MD 15.875 6.35 6.35 0.8 ☆ ★
150612-MD 15.875 6.35 6.35 1.2 ☆ ☆
150616-MD 15.875 6.35 6.35 1.6 ☆ ☆
190608-MD 19.05 6.35 7.93 0.8 ☆ ★
190612-MD 19.05 6.35 7.93 1.2 ☆ ☆
160404-MD 9.525 4.76 3.81 0.4 ☆ ★
160408-MD 9.525 4.76 3.81 0.8 ☆ ★
160412-MD 9.525 4.76 3.81 1.2 ☆ ☆
TNMG
220404-MD 12.7 4.76 5.16 0.4 ☆ ★
220408-MD 12.7 4.76 5.16 0.8 ☆ ★
220412-MD 12.7 4.76 5.16 1.2 ☆ ☆
160404-MD 9.525 4.76 3.81 0.4 ☆ ★
160408-MD 9.525 4.76 3.81 0.8 ☆ ★
VNMG
160412-MD 9.525 4.76 3.81 1.2 ☆ ☆

041

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet

BPG05B
BPG10A
BPG20A
BPG153
BPG251

BPG318
BPC102

BPT15A
BPU206
BPS051
BPS101

BPS103
BPS251

BN201
BN301
ΦI.C S Φd R
General Turning

060404-MD 9.525 4.76 3.81 0.4 ☆ ★

060408-MD 9.525 4.76 3.81 1.2 ☆ ★
060412-MD 9.525 4.76 3.81 1.2 ☆ ☆
WNMG
080404-MD 12.7 4.76 5.16 0.4 ☆ ★
080408-MD 12.7 4.76 5.16 0.8 ☆ ★
080412-MD 12.7 4.76 5.16 1.2 ☆ ☆
160404-HQ 9.525 4.76 3.81 0.4 ☆ ★
160408-HQ 9.525 4.76 3.81 0.8 ☆ ★
TNMG

120404-MA 12.7 4.76 0.4 ☆ ★

120408-MA 12.7 4.76 0.8 ☆ ★
CNMG

160404-MA 9.525 4.76 0.4 ☆ ★

160408-MA 9.525 4.76 0.8 ☆ ★
TNMG

080404-MA 12.7 4.76 0.4 ☆ ★

080408-MA 12.7 4.76 0.8 ☆ ★
WNMG

042

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic

BPG05B
BPG10A
BPG20A
BPG153
BPG251

BPG318
BPC102

BPT15A
BPU206
BPS051
BPS101

BPS103
BPS251

BN201
BN301
ΦI.C S Φd R

General Turning
120404-TM 12.7 4.76 5.16 0.4 ☆ ★ ☆ ★
120408-TM 12.7 4.76 5.16 0.8 ☆ ★ ☆ ★
CNMG
120412-TM 12.7 4.76 5.16 1.2 ☆ ★ ☆ ★

150408-TM 12.7 4.76 5.16 0.8 ☆ ★ ☆ ★

150608-TM 12.7 6.35 5.16 0.8 ☆ ★ ☆ ★
DNMG

160404-TM 9.525 4.76 3.81 0.4 ☆ ★ ☆ ★

160408-TM 9.525 4.76 3.81 0.8 ☆ ★ ☆ ★
160412-TM 9.525 4.76 3.81 1.2 ☆ ★ ☆ ★
TNMG
220404-TM 12.7 4.76 5.16 0.4 ☆ ★ ☆ ★
220408-TM 12.7 4.76 5.16 0.8 ☆ ★ ☆ ★
220412-TM 12.7 4.76 5.16 1.2 ☆ ★ ☆ ★
160404-TM 9.525 4.76 3.81 0.4 ☆ ★ ☆ ★
160408-TM 9.525 4.76 3.81 0.8 ☆ ★ ☆ ★
VNMG
160412-TM 9.525 4.76 3.81 1.2 ☆ ★ ☆ ★

080404-TM 12.7 4.76 5.16 0.4 ☆ ★ ☆ ★

080408-TM 12.7 4.76 5.16 0.8 ☆ ★ ☆ ★
WNMG
080412-TM 12.7 4.76 5.16 1.2 ☆ ★ ☆ ★

043

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C S Φd

BP10
BP20
BP35

YT14
YT15
R

YW1
YW2
YT5
普通车削
General Turning

120404L/R-N 12.7 4.76 5.16 0.4 ★ ★

☆
120408L/R-N 12.7 4.76 5.16 0.8 ★ ★
☆
SNMG
★ ★
☆
★ ★
☆
090304L/R-N 9.525 3.18 3.81 0.4 ★ ★
☆
090308L/R-N 9.525 3.18 3.81 0.8 ★
★ ☆
SNGG
120404L/R-N 12.7 4.76 5.16 0.4 ★
★ ☆
120408L/R-N 12.7 4.76 5.16 0.8 ★
★ ☆
110302L/R-N 6.35 3.18 2.4 0.2 ★
★ ☆
110304L/R-N 6.35 3.18 2.4 0.4 ★
★ ☆
110308L/R-N 6.35 3.18 2.4 0.8 ★
★ ☆
160304L/R-N 9.525 3.18 3.81 0.4 ★
★ ☆
160402L/R-N 9.525 4.76 3.81 0.2 ★
★ ☆
160404L/R-N 9.525 4.76 3.81 0.4 ★
★ ☆
TNGG
160408L/R-N 9.525 4.76 3.81 0.8 ★
★ ☆
160412L/R-N 9.525 4.76 3.81 1.2 ★
★ ☆
160416L/R-N 9.525 4.76 3.81 1.6 ★
★ ☆
220404L/R-N 12.7 4.76 5.16 0.4 ★
★ ☆
220408L/R-N 12.7 4.76 5.16 0.8 ★
★ ☆
220412L/R-N 12.7 4.76 5.16 1.2 ★
★ ☆
110302L/R-N 6.35 3.18 2.4 0.2 ★
★ ☆
110304L/R-N 6.35 3.18 2.4 0.4 ★
★ ☆
VNGG
160402L/R-N 9.525 4.76 3.81 0.2 ★
★ ☆
160404L/R-N 9.525 4.76 3.81 0.4 ★
★ ☆
060404L/R-N 9.525 4.76 3.81 0.8 ★
★ ☆
060408L/R-N 9.525 4.76 3.81 1.2 ★ ★
☆
WNGG

044

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C S Φd

BP10
BP20
BP35

YT14
YT15
R

YW1
YW2
YT5

General Turning
090404L/R-H 9.525 4.76 3.81 0.4 ★ ★
090408L/R-H 9.525 4.76 3.81 0.8 ★ ★
CNGG
120404L/R-H 12.7 4.76 5.16 0.4 ★ ★
120408L/R-H 12.7 4.76 5.16 0.8 ★ ★
110404L/R-H 9.525 4.76 3.81 0.4 ★ ★
110408L/R-H 9.525 4.76 3.81 0.8 ★ ★
DNGG
150404L/R-H 12.7 4.76 5.16 0.4 ★ ★
150408L/R-H 12.7 4.76 5.16 0.8 ★ ★
160402L/R-H 9.525 4.76 3.81 0.2 ★ ★
160404L/R-H 9.525 4.76 3.81 0.4 ★ ★
VNGG
160408L/R-H 9.525 4.76 3.81 0.8 ★ ★

045

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-5 Inserts for processing steel
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic

BPG05B
BPG10A
BPG20A
BPG153
BPG251

BPG318
BPC102

BPT15A
BPU206
BPS051
BPS101

BPS103
BPS251

BN201
BN301
ΦI.C S Φd R α
General Turning

060204-MD 6.35 2.38 2.8 0.4 7° ☆ ★ ☆ ★

060208-MD 6.35 2.38 2.8 0.8 7° ☆ ★ ☆ ★
09T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★ ☆ ★
CCMT 09T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★ ☆ ★
120404-MD 12.7 4.76 5.5 0.4 7° ☆ ★ ☆ ★
120408-MD 12.7 4.76 5.5 0.8 7° ☆ ★ ☆ ★
120412-MD 12.7 4.76 5.5 1.2 7° ☆ ★ ☆ ★
070204-MD 6.35 2.38 2.8 0.4 7° ☆ ★ ☆ ★
070208-MD 6.35 2.38 2.8 0.8 7° ☆ ★ ☆ ★
DCMT 11T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★ ☆ ★
11T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★ ☆ ★
11T312-MD 9.525 3.97 4.4 1.2 7° ☆ ★ ☆ ★
09T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★ ☆ ★
09T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★ ☆ ★
09T312-MD 9.525 3.97 4.4 1.2 7° ☆ ★ ☆ ★
SCMT
120404-MD 12.7 4.76 5.5 0.4 7° ☆ ★ ☆ ★
120408-MD 12.7 4.76 5.5 0.8 7° ☆ ★ ☆ ★
120412-MD 12.7 4.76 5.5 1.2 7° ☆ ★ ☆ ★
090204-MD 5.56 2.38 2.5 0.4 7° ☆ ★ ☆ ★
090208-MD 5.56 2.38 2.5 0.8 7° ☆ ★ ☆ ★
110304-MD 6.35 3.18 2.8 0.4 7° ☆ ★ ☆ ★
110308-MD 6.35 3.18 2.8 0.8 7° ☆ ★ ☆ ★
TCMT
110312-MD 6.35 3.18 2.8 1.2 7° ☆ ★ ☆ ★
16T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★ ☆ ★
16T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★ ☆ ★
16T312-MD 9.525 3.97 4.4 1.2 7° ☆ ★ ☆ ★
110304-MD 6.35 3.18 2.8 0.4 7° ☆ ★ ☆ ★
VCMT
110308-MD 6.35 3.18 2.8 0.8 7° ☆ ★ ☆ ★
160404-MD 9.525 4.76 4.4 0.4 5° ☆ ★ ☆ ★
VBMT
160408-MD 9.525 4.76 4.4 0.8 5° ☆ ★ ☆ ★
0803MOE-R1 8 2.38 3.3 - 7° ☆ ★ ☆ ★
10T3MOE-R1 10 3.97 4.5 - 7° ☆ ★ ☆ ★
RCMT 1204MOE-R2 12 4.76 4.4 - 7° ☆ ★ ☆ ★
1606MOE-R3 16 6.35 5.5 - 7° ☆ ★ ☆ ★
2006MOE-R4 20 6.35 6.5 - 7° ☆ ★ ☆ ★

046

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-5 Inserts for processing steel
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C S Φd α

BP10
BP20
BP35

YT14
YT15
R

YW1
YW2
YT5

普通车削
General Turning
090304L/R-N 9.525 3.18 4.4 0.4 11° ☆ ★
090308L/R-N 9.525 3.18 4.4 0.8 11° ☆ ★
CPMH

070201L/R-N 6.35 2.38 2.8 0.1 7° ☆ ★

070202L/R-N 6.35 2.38 2.8 0.2 7° ☆ ★
DCGT 11T301L/R-N 9.525 3.97 4.4 0.1 7° ☆ ★
11T302L/R-N 9.525 3.97 4.4 0.2 7° ☆ ★
11T304L/R-N 9.525 3.97 4.4 0.4 7° ☆ ★
110302L/R-N 6.35 3.18 3.4 0.2 11° ☆ ★
110304L/R-N 6.35 3.18 3.4 0.4 11° ☆ ★
TPGH 110308L/R-N 6.35 3.18 3.4 0.8 11° ☆ ★
160304L/R-N 9.525 3.18 4.4 0.4 11° ☆ ★
160308L/R-N 9.525 3.18 4.4 0.8 11° ☆ ★
110301L/R-N 6.35 3.18 2.8 0.1 5° ☆ ★
110302L/R-N 6.35 3.18 2.8 0.2 5° ☆ ★
110304L/R-N 6.35 3.18 2.8 0.4 5° ☆ ★
VBGT 110308L/R-N 6.35 3.18 2.8 0.8 5° ☆ ★
160402L/R-N 9.525 4.76 4.4 0.2 5° ☆ ★
160404L/R-N 9.525 4.76 4.4 0.4 5° ☆ ★
160408L/R-N 9.525 4.76 4.4 0.8 5° ☆ ★
060304L/R-N 9.525 4.76 4.4 0.4 11° ☆ ★
060308L/R-N 9.525 4.76 4.4 0.8 11° ☆ ★
WPGT

047

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-5 Inserts for processing steel

T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Ceramic Uncoated grade

BPG10A
BPG20A
BPG153
BPG251

BPG318
BPU206
BPS051
BPS101
BPS103
BPS251

BN201
BN301
ΦI.C S Φd α

BP10
BP20
BP35

YT14
YT15
R

YW1
YW2
YT5
普通车削
General Turning

060201L/R-E 6.35 2.38 2.8 0.1 7° ☆ ★

060202L/R-E 6.35 2.38 2.8 0.2 7° ☆ ★
060204L/R-E 6.35 2.38 2.8 0.4 7° ☆ ★
CCET
09T301L/R-E 9.525 3.97 4.4 0.1 7° ☆ ★
09T302L/R-E 9.525 3.97 4.4 0.2 7° ☆ ★
09T304L/R-E 9.525 3.97 4.4 0.4 7° ☆ ★
060201L/R-E 6.35 2.38 2.8 0.1 7° ☆ ★
060202L/R-E 6.35 2.38 2.8 0.2 7° ☆ ★
060204L/R-E 6.35 2.38 2.8 0.4 7° ☆ ★
CCGT
09T301L/R-E 9.525 3.97 4.4 0.1 7° ☆ ★
09T302L/R-E 9.525 3.97 4.4 0.2 7° ☆ ★
09T304L/R-E 9.525 3.97 4.4 0.4 7° ☆ ★
090304L/R-E 9.525 3.18 4.4 0.4 11° ☆ ★
090308L/R-E 9.525 3.18 4.4 0.8 11° ☆ ★
SPGT
120304L/R-E 12.7 3.18 5.5 0.4 11° ☆ ★
120308L/R-E 12.7 3.18 5.5 0.8 11° ☆ ★
110302L/R-E 6.35 3.18 2.8 0.2 11° ☆ ★

TPET

110302L/R-E 6.35 3.18 2.8 0.2 7° ☆ ★

TCGT

070202L/R-H 6.35 2.38 2.8 0.2 7° ☆ ★

070204L/R-H 6.35 2.38 2.8 0.4 7° ☆ ★
DCET
11T302L/R-H 9.525 3.97 4.4 0.2 7° ☆ ★
11T304L/R-H 9.525 3.97 4.4 0.4 7° ☆ ★

048

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-5 Inserts for processing steel
rake

Grade recommendation
Dimension（mm）
The basic shape of blade Type
CVD coating grade PVD coating grade Uncoated grade

BPG35A
BPG353

BPG318
BPP302
BPS253
BPS301
BPS303

BPS353

BPP206
ΦI.C Φd

BP20
BP35
S R

YT14
YT15
YW1
YW2
YT5

General Turning
120408-RA 12.7 4.76 5.16 0.8 ★
120412-RA 12.7 4.76 5.16 1.2 ★
120416-RA 12.7 4.76 5.16 1.6 ★
CNMG 160608-RA 15.875 6.35 6.35 0.8 ★
160612-RA 15.875 6.35 6.35 1.2 ★
160616-RA 15.875 6.35 6.35 1.6 ★
190612-RA 19.05 6.35 7.93 1.2 ★
150408-RA 12.7 4.76 5.16 0.8 ★
150412-RA 12.7 4.76 5.16 1.2 ★
150416-RA 12.7 4.76 5.16 1.6 ★
DNMG
150608-RA 12.7 6.35 5.16 0.8 ★
150612-RA 12.7 6.35 5.16 1.2 ★
150616-RA 12.7 6.35 5.16 1.6 ★
120408-RA 12.7 4.76 5.16 0.8 ★
120412-RA 12.7 4.76 5.16 1.2 ★
120416-RA 12.7 4.76 5.16 1.6 ★
150608-RA 15.875 6.35 6.35 0.8 ★
SNMG 150612-RA 15.875 6.35 6.35 1.2 ★
150616-RA 15.875 6.35 6.35 1.6 ★
190608-RA 19.05 6.35 7.93 0.8 ★
190612-RA 19.05 6.35 7.93 1.2 ★
190616-RA 19.05 6.35 7.93 1.6 ★
160408-RA 9.525 4.76 3.81 0.8 ★
160412-RA 9.525 4.76 3.81 1.2 ★
TNMG 220408-RA 12.7 4.76 5.16 0.8 ★
220412-RA 12.7 4.76 5.16 1.2 ★
220416-RA 12.7 4.76 5.16 1.6 ★
060408-RA 9.525 4.76 3.81 0.8 ★
060412-RA 9.525 4.76 3.81 1.2 ★
WNMG 080408-RA 12.7 4.76 5.16 0.8 ★
080412-RA 12.7 4.76 5.16 1.2 ★
080416-RA 12.7 4.76 5.16 1.6 ★

049

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B 普通车削 General Turning

B1-5 Inserts for processing and

T rake

Grade recommendation
Dimension（mm）

B The basic shape of inserts Type

CVD coating grade PVD coating grade Uncoated grade

BPG35A
BPG353

BPG318
BPP302
BPS253
BPS301
BPS303

BPS353

BPP206
ΦI.C Φd α
General Turning

BP20
BP35
S R

YT14
YT15
YW1
YW2
YT5
060208-RA 6.35 2.38 2.8 0.8 7° ★
09T308-RA 9.525 3.97 4.4 0.8 7° ★
CCMT
09T312-RA 9.525 3.97 4.4 1.2 7° ★

11T308-RA 9.525 3.97 4.4 0.8 7° ★

11T312-RA 9.525 3.97 4.4 1.2 7° ★
DCMT

09T308-RA 9.525 3.97 4.4 0.8 7° ★

120408-RA 12.7 4.76 5.5 0.8 7° ★
SCMT
120412-RA 12.7 4.76 5.5 1.2 7° ★

110308-RA 6.35 3.18 2.8 0.8 7° ★

110312-RA 6.35 3.18 2.8 1.2 7° ★
TCMT
16T308-RA 9.525 3.97 4.4 0.8 7° ★
16T312-RA 9.525 3.97 4.4 1.2 7° ★

050
 B General Turning
B1-6 Inserts for processing stainless steel Grades
M Process on stainless steel

a Grade for coating

Grade ISO classification Surface color Applications Recommended

General Turning
BPG153 M15(M05-M25) gold
CVD coated carbide grade with a wear-resistant coating, high temperature resistant matrix. For stainless steel finishing and light roughing at
medium to high cutting speed. Preferred for continuous cutting.
Black/yellow
BPG251 M20(M10-M25)
Fine grain carbide thin CVD coating. Suitable for various of the stainless steel finishing .

BPG253 M25(M15-M35) gold

CVD coated [Link] austenitic stainless steels and duplex stainless steel semi-finishing to roughing at medium cutting speed. Great heat
resistance and mechanical shock resistance. In the intermittent cutting it has an excellent edge security.

BPG318 M25(M10-M30) Purple yellow

PVD coated micro-grain [Link] for a variety of stainless steel finishing at medium to low cutting speed. When need excellent edge strength
and high surface quality, it provides the perfect ride cutting. of high thermal shock resistance. Suitable for light interrupted cuts.

BPU206 M25(M10-M30) reddish brown

Using high strength, high wear resistance and owe loss Phase Equilibrium ultrafine grain substrate with PVD TiAlN coating, suitable for processing
most of the workpiece material, and can achieve a stable turning and milling.

BPG363 M35(M25-M40) gold

CVD coated carbide with high strength [Link] on stainless steel and stainless steel castings with difficult-to-machine epidermal roughing at low
to medium cutting speed. Excellent cutting edge security, allow overloading interrupted cutting.

BPG35A M35(M25-M40) yellow

PVD coated [Link] on austenitic stainless steels and duplex stainless steel semi-finishing to roughing at low to medium cutting [Link]
thermal shock resistance. Ideal for quickly interrupted cutting.

051

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-6 Inserts for processing stainless steel Grades
M Process on stainless steel

c Grade for uncoating

Application

B
General Turning

052

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-6 Inserts for processing stainless steel
rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade B

BPG153

BPG251

BPG058
BPT05B
BPT15A

BPU206
BPS101
BPS251

BPS153

BPT056

BM15A
BM25A
BN201
BN301
BM10
ΦI.C Φd

General Turning
S R

090304-SJ 9.525 3.18 3.81 0.4 ★

090308-SJ 9.525 3.18 3.81 0.8 ★
CNMG 120404-SJ 12.7 4.76 5.16 0.4 ★
120408-SJ 12.7 4.76 5.16 0.8 ★
120412-SJ 12.7 4.76 5.16 1.2
110404-SJ 9.525 4.76 3.81 0.4 ★
110408-SJ 9.525 4.76 3.81 0.8 ★
150404-SJ 12.7 4.76 5.16 0.4 ★
150408-SJ 12.7 4.76 5.16 0.8 ★
DNMG
150412-SJ 12.7 4.76 5.16 1.2 ★
150604-SJ 12.7 6.35 5.16 0.4 ★
150608-SJ 12.7 6.35 5.16 0.8 ★
150612-SJ 12.7 6.35 5.16 1.2 ★
090304-SJ 9.525 3.18 3.81 0.4 ★
090308-SJ 9.525 3.18 3.81 0.8 ★
090312-SJ 9.525 3.18 3.81 1.2 ★
120404-SJ 12.7 4.76 5.16 0.4 ★
SNMG 120408-SJ 12.7 4.76 5.16 0.8 ★
120412-SJ 12.7 4.76 5.16 1.2 ★
120416-SJ 12.7 4.76 5.16 1.6 ★
150608-SJ 15.875 6.35 6.35 0.8 ★
150612-SJ 15.875 6.35 6.35 1.2 ★
110302-SJ 6.35 3.18 2.4 0.2 ★
110304-SJ 6.35 3.18 2.4 0.4 ★
110308-SJ 6.35 3.18 2.4 0.8 ★
110312-SJ 9.525 4.76 3.81 1.2 ★
160404-SJ 9.525 4.76 3.81 0.4 ★
TNMG 160408-SJ 9.525 4.76 3.81 0.8 ★
160412-SJ 9.525 4.76 3.81 1.2 ★
160416-SJ 9.525 4.76 3.81 1.6 ★
220404-SJ 12.7 4.76 5.16 0.4 ★
220408-SJ 12.7 4.76 5.16 0.8 ★
220412-SJ 12.7 4.76 5.16 1.2 ★

053

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-6 Inserts for processing stainless steel

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG153

BPG251

BPG058
BPT05B
BPT15A

BPU206
BPS101
BPS251

BPS153

BPT056

BM15A
BM25A
BN201
BN301
BM10
ΦI.C S Φd R
General Turning

160404-SJ 9.525 4.76 3.81 0.4 ★

160408-SJ 9.525 4.76 3.81 0.8 ★
VNMG

060404-SJ 9.525 4.76 3.81 0.4 ★

060408-SJ 9.525 4.76 3.81 0.8 ★
WNMG
080404-SJ 12.7 4.76 5.16 0.4 ★
080408-SJ 12.7 4.76 5.16 0.8 ★

054

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-6 Inserts for processing stainless steel
rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoating grade

BPG153
BPG251

BPG058
BPT05B
BPU109

BPU206
BPS101
BPS251
BPS302

BPT056

BM15A
BM25A
BN201
BN301
ΦI.C Φd

BM10
S R

General Turning
120404-LH 12.7 4.76 5.16 0.4 ★
120408-LH 12.7 4.76 5.16 0.8 ★
CNMG
120412-LH 12.7 4.76 5.16 1.2 ★

150404-LH 12.7 4.76 5.16 0.4 ★

150408-LH 12.7 4.76 5.16 0.8 ★
DNMG
150604-LH 12.7 6.35 5.16 0.4 ★
150608-LH 12.7 6.35 5.16 0.8 ★
120404-LH 12.7 4.76 5.16 0.4 ★
120408-LH 12.7 4.76 5.16 0.8 ★
SNMG
120412-LH 12.7 4.76 5.16 1.2 ★

160404-LH 9.525 4.76 3.81 0.4 ★

160408-LH 9.525 4.76 3.81 0.8 ★
TNMG 160412-LH 9.525 4.76 3.81 1.2 ★
220408-LH 12.7 4.76 5.16 0.8 ★
220412-LH 12.7 4.76 5.16 1.2 ★
160404-LH 9.525 4.76 3.81 0.4 ★
VNMG
160408-LH 9.525 4.76 3.81 0.8 ★
160401-LH 9.525 4.76 3.81 0.1 ★
VNGG 160402-LH 9.525 4.76 3.81 0.4 ★
160404-LH 9.525 4.76 3.81 0.8 ★
060404-LH 9.525 4.76 3.81 0.4 ★
060408-LH 9.525 4.76 3.81 0.8 ★
WNMG 080404-LH 12.7 4.76 5.16 0.4 ★
080408-LH 12.7 4.76 5.16 0.8 ★
080412-LH 12.7 4.76 5.16 1.2 ★
080404-LH 12.7 4.76 5.16 0.4 ★
WNGG
080408-LH 12.7 4.76 5.16 0.8 ★

055

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-6 Inserts for processing stainless steel
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet

BPG10A
BPG153

BPG251

BPG058
BPT05B

BPT15A

BPU206
BPS051
BPS101

BPS153

BPT056

BN201
BN301
ΦI.C S Φd R α
General Turning

060202-FW 6.35 2.38 2.8 0.2 7° ☆ ☆

★
060204-FW 6.35 2.38 2.8 0.4 7° ☆ ☆
★
09T302-FW 9.525 3.97 4.4 0.2 7° ☆ ☆
★
CCMT
09T304-FW 9.525 3.97 4.4 0.4 7° ☆ ☆
★
09T308-FW 9.525 3.97 4.4 0.8 7° ☆ ☆
★
120404-FW 12.7 4.76 5.5 0.4 7° ☆ ☆
★
070202-FW 6.35 2.38 2.8 0.2 7° ☆ ☆
★
070204-FW 6.35 2.38 2.8 0.4 7° ☆ ☆
★
DCMT 11T302-FW 9.525 3.97 4.4 0.2 7° ☆ ☆
★
11T304-FW 9.525 3.97 4.4 0.4 7° ☆ ☆
★
11T308-FW 9.525 3.97 4.4 0.8 7° ☆ ☆
★
09T304-FW 9.525 3.18 4.4 0.4 7° ☆ ☆
★
09T308-FW 9.525 3.18 4.4 0.8 7° ☆ ☆
★
SCMT 120404-FW 12.7 4.76 5.5 0.4 7° ☆ ☆
★
120408-FW 12.7 4.76 5.5 0.8 7° ☆ ☆
★
120412-FW 12.7 4.76 5.5 1.2 7° ☆ ☆
★
090202-FW 5.56 2.38 2.5 0.2 7° ☆ ☆
★
090204-FW 5.56 2.38 2.5 0.4 7° ☆ ☆
★
110302-FW 6.35 3.18 2.8 0.2 7° ☆ ☆
★
TCMT
110304-FW 6.35 3.18 2.8 0.4 7° ☆ ☆
★
110308-FW 6.35 3.18 2.8 0.8 7° ☆ ☆
★
16T304-FW 9.525 3.97 4.4 0.4 7° ☆ ☆
★
110302-FW 6.35 3.18 2.8 0.2 5° ☆ ☆
★
110304-FW 6.35 3.18 2.8 0.4 5° ☆ ☆
★
110308-FW 6.35 3.18 2.8 0.8 5° ☆ ☆
★
VBMT
160402-FW 9.525 4.76 4.4 0.2 5° ☆ ☆
★
160404-FW 9.525 4.76 4.4 0.2 5° ☆ ☆
★
160408-FW 9.525 4.76 4.4 0.2 5° ☆ ☆
★

056

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-6 Inserts for processing stainless steel
rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet

BPG10A
BPG353
BPG253
BPG251

BPG318
BPT05B

BPT15A

BPU206
BPS101
BPS251

BPT056

BN201
BN301
ΦI.C S Φd R

General Turning
120408-SN 12.7 4.76 5.16 0.8 ★
☆ ☆ ★
☆
120412-SN 12.7 4.76 5.16 1.2 ★
☆ ☆ ★
☆
160608-SN 15.875 6.35 6.35 0.8 ★
☆ ☆ ★
☆
CNMG
160612-SN 15.875 6.35 6.35 1.2 ★
☆ ☆ ★
☆
190608-SN 19.05 6.35 7.93 0.8 ★
☆ ☆ ★
☆
190612-SN 19.05 6.35 7.93 1.2 ★
☆ ☆ ★
☆
110408-SN 9.525 4.76 3.81 0.8 ★
☆ ☆ ★
☆
110412-SN 9.525 4.76 3.81 1.2 ★
☆ ☆ ★
☆
150408-SN 12.7 4.76 5.16 0.8 ★
☆ ☆ ★
☆
DNMG
150412-SN 12.7 4.76 5.16 1.2 ★
☆ ☆ ★
☆
150608-SN 12.7 6.35 5.16 0.8 ★
☆ ☆ ★
☆
150612-SN 12.7 6.35 5.16 1.2 ★
☆ ☆ ★
☆
120408-SN 12.7 4.76 5.16 0.8 ★
☆ ☆ ★
☆
120412-SN 12.7 4.76 5.16 1.2 ★
☆ ☆ ★
☆
SNMG
150612-SN 15.875 6.35 6.35 1.2 ★
☆ ☆ ★
☆

160408-SN 9.525 4.76 3.81 0.8 ★

☆ ☆ ★
☆
160412-SN 9.525 4.76 3.81 1.2 ★
☆ ☆ ★
☆
TNMG
220408-SN 12.7 4.76 5.16 0.8 ★
☆ ☆ ★
☆
220412-SN 12.7 4.76 5.16 1.2 ★
☆ ☆ ★
☆
160408-SN 9.525 4.76 3.81 0.8 ★
☆ ☆ ★
☆
160412-SN 9.525 4.76 3.81 1.2 ★
☆ ☆ ★
☆
VNMG

060408-SN 9.525 4.76 3.81 0.8 ★

☆ ☆ ★
☆
060412-SN 9.525 4.76 3.81 1.2 ★
☆ ☆ ★
☆
WNMG
080408-SN 12.7 4.76 5.16 0.8 ★
☆ ☆ ★
☆
080412-SN 12.7 4.76 5.16 1.2 ★
☆ ☆ ★
☆
120408-HM 12.7 4.76 5.16 0.8 ★
☆ ☆ ★
☆
120412-HM 12.7 4.76 5.16 1.2 ★
☆ ☆ ★
☆
160608-HM 15.875 6.35 6.35 0.8 ★
☆ ☆ ★
☆
CNMG
160612-HM 15.875 6.35 6.35 1.2 ★
☆ ☆ ★
☆
190608-HM 19.05 6.35 7.93 0.8 ★
☆ ☆ ★
☆
190612-HM 19.05 6.35 7.93 1.2 ★
☆ ☆ ★
☆
160408-HM 9.525 4.76 3.81 0.8 ★
☆ ☆ ★
☆
160412-HM 9.525 4.76 3.81 1.2 ★
☆ ☆ ★
☆
TNMG
220408-HM 12.7 4.76 5.16 0.8 ★
☆ ☆ ★
☆
220412-HM 12.7 4.76 5.16 1.2 ★
☆ ☆ ☆
★

057

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-6 Inserts for processing stainless steel

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet

BPG10A
BPG353
BPG253
BPG251

BPG318
BPT05B

BPT15A

BPU206
BPS101
BPS251

BPT056

BN201
BN301
ΦI.C S Φd R
General Turning

120408-SA 12.7 4.76 5.16 0.8 ★

☆ ☆ ☆
★
120412-SA 12.7 4.76 5.16 1.2 ☆
★ ☆ ☆
★
160608-SA 15.875 6.35 6.35 0.8 ☆
★ ☆ ☆
★
CNMG
160612-SA 15.875 6.35 6.35 1.2 ★
☆ ☆ ☆
★
190608-SA 19.05 6.35 7.93 0.8 ★
☆ ☆ ☆
★
190612-SA 19.05 6.35 7.93 1.2 ★
☆ ☆ ☆
★
060408-SA 9.525 4.76 3.81 0.8 ★
☆ ☆ ☆
★
060412-SA 9.525 4.76 3.81 1.2 ★
☆ ☆ ☆
★
WNMA
080408-SA 12.7 4.76 5.16 0.8 ★
☆ ☆ ☆
★
080412-SA 12.7 4.76 5.16 1.2 ★
☆ ☆ ☆
★
160408-SA 9.525 4.76 3.81 0.8 ★
☆ ☆ ☆
★
160412-SA 9.525 4.76 3.81 1.2 ★
☆ ☆ ☆
★
VNMG

058

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-6 Inserts for processing stainless steel
T rake

Grade recommendation
Dimension（mm）
The basic shape of blade Type
CVD coating grade PVD coating grade Cermet

BPG20A

BPG05B
BPG251

BPG058

BPG318
BPC052
BPC053
BPC102

BPT05B

BPT15A

BPU206
BPS101
BPS251

BN201
BN301
ΦI.C S Φd R α

General Turning
060204-MD 6.35 2.38 2.8 0.4 7° ★
☆ ☆ ★
060208-MD 6.35 2.38 2.8 0.8 7° ★
☆ ☆ ★
09T304-MD 9.525 3.97 4.4 0.4 7° ★ ☆
☆ ★
CCMT 09T308-MD 9.525 3.97 4.4 0.8 7° ★
☆ ☆ ★
120404-MD 12.7 4.76 5.5 0.4 7° ★ ☆
☆ ★
120408-MD 12.7 4.76 5.5 0.8 7° ★ ☆
☆ ★
120412-MD 12.7 4.76 5.5 1.2 7° ★ ☆
☆ ★
070204-MD 6.35 2.38 2.8 0.4 7° ★
☆ ☆ ★
070208-MD 6.35 2.38 2.8 0.8 7° ★
☆ ☆ ★
DCMT 11T304-MD 9.525 3.97 4.4 0.4 7° ★
☆ ☆ ★
11T308-MD 9.525 3.97 4.4 0.8 7° ★
☆ ☆ ★
11T312-MD 9.525 3.97 4.4 1.2 7° ★
☆ ☆ ★
09T304-MD 9.525 3.97 4.4 0.4 7° ★ ☆
☆ ★
09T308-MD 9.525 3.97 4.4 0.8 7° ★
☆ ☆ ★
09T312-MD 9.525 3.97 4.4 1.2 7° ★ ☆
☆ ★
SCMT
120404-MD 12.7 4.76 5.5 0.4 7° ★ ☆
☆ ★
120408-MD 12.7 4.76 5.5 0.8 7° ★ ☆
☆ ★
120412-MD 12.7 4.76 5.5 1.2 7° ★ ☆
☆ ★
090204-MD 5.56 2.38 2.5 0.4 7° ★
☆ ☆ ★
090208-MD 5.56 2.38 2.5 0.8 7° ★
☆ ☆ ★
110304-MD 6.35 3.18 2.8 0.4 7° ★
☆ ☆ ★
110308-MD 6.35 3.18 2.8 0.8 7° ★
☆ ☆ ★
TCMT
110312-MD 6.35 3.18 2.8 1.2 7° ★
☆ ☆ ★
16T304-MD 9.525 3.97 4.4 0.4 7° ★ ☆
☆ ★
16T308-MD 9.525 3.97 4.4 0.8 7° ★
☆ ☆ ★
16T312-MD 9.525 3.97 4.4 1.2 7° ★ ☆
☆ ★
110304-MD 6.35 3.18 2.8 0.4 7° ★
☆ ☆ ★
VCMT
110308-MD 6.35 3.18 2.8 0.8 7° ★
☆ ☆ ★
160404-MD 9.525 4.76 4.4 0.4 5° ★
☆ ☆ ★
VBMT
160408-MD 9.525 4.76 4.4 0.8 5° ★
☆ ☆ ★
0803MOE-R1 8 2.38 3.3 - 7° ★
☆ ☆ ★
10T3MOE-R1 10 3.97 4.5 - 7° ★
☆ ☆ ★
RCMT 1204MOE-R2 12 4.76 4.4 - 7° ★
☆ ☆ ★
1606MOE-R3 16 6.35 5.5 - 7° ★
☆ ☆ ★
2006MOE-R4 20 6.35 6.5 - 7° ☆ ☆
★ ★

059

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-7 Inserts for processing castiron Grades

K Process on cost iron

a Grade for coating

Grade ISO classification Surface color Applications Recommended

B Black
BPC052 K10(K05-K20) CVD coated carbide is extremely hard substrate and extremely thick, smooth, wear-resistant coating. Recommended for nodular cast iron (NCI)
General Turning

high-speed turning.

BPC102 K15(K10-K25) Black

CVD-coated cemented carbide, the hard substrate coated with a smooth and wear-resistant coating,can bear harsh intermittent cutting conditions.
Universal grade for all cast iron roughing cutting at low to medium speed.

b Grade for uncoating

Applications Recommended

BK10

Applications Recommended

060

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-7 Inserts for processing castiron
rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoating grade B

BPG20A

BPG05B
BPG251

BPG058

BPG318

BK10UF
BPC052
BPC053
BPC102

BPT05B

BPT15A

BPU206
BPS101
BPS251

BN201
BN301
BU810

BU820
ΦI.C Φd

General Turning
S R

BK10
120404-U 12.7 4.76 5.16 0.4 ☆ ★
120408-U 12.7 4.76 5.16 0.8 ☆ ★
120412-U 12.7 4.76 5.16 1.2 ☆ ★
CNMG
160604-U 15.875 6.35 6.35 0.4 ☆ ★
160608-U 15.875 6.35 6.35 0.8 ☆ ★
160612-U 15.875 6.35 6.35 1.2 ☆ ★
11T304-U 9.525 3.97 3.81 0.4 ☆ ★
11T308-U 9.525 3.97 3.81 0.8 ☆ ★
150404-U 12.7 4.76 5.16 0.4 ☆ ★
DNMG
150408-U 12.7 4.76 5.16 0.8 ☆ ★
150604-U 12.7 6.35 5.16 0.4 ☆ ★
150608-U 12.7 6.35 5.16 0.8 ☆ ★
090304-U 9.525 3.18 3.81 0.4 ☆ ★
090308-U 9.525 3.18 3.81 0.8 ☆ ★
120404-U 12.7 4.76 5.16 0.4 ☆ ★
SNMG 120408-U 12.7 4.76 5.16 0.8 ☆ ★
120412-U 12.7 4.76 5.16 1.2 ☆ ★
150608-U 15.875 6.35 6.35 0.8 ☆ ★
150612-U 15.875 6.35 6.35 1.2 ☆ ★
16T304-U 9.525 3.97 3.81 0.4 ☆ ★
16T308-U 9.525 3.97 3.81 0.8 ☆ ★
TNMG
16T312-U 9.525 3.97 3.81 1.2 ☆ ★
☆ ★
160404-U 9.525 4.76 3.81 0.4 ☆ ★
160408-U 9.525 4.76 3.81 0.8 ☆ ★
VNMG 220404-U 12.7 4.76 5.16 0.4 ☆ ★
220408-U 12.7 4.76 5.16 0.8 ☆ ★
220412-U 12.7 4.76 5.16 1.2 ☆ ★
080404-U 12.7 4.76 5.16 0.4 ☆ ★
080408-U 12.7 4.76 5.16 0.8 ☆ ★
WNMG
080412-U 12.7 4.76 5.16 1.2 ☆ ★
☆ ★

061

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-7 Inserts for processing castiron

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoating grade

BPG20A

BPG05B
BPG251

BPG058

BPG318

BK10UF
BPC052
BPC053
BPC102

BPT05B

BPT15A

BPU206
BPS101
BPS251

BN201
BN301
BU810

BU820
ΦI.C S Φd R

BK10
General Turning

110404-CX 9.525 3.97 3.81 0.4 ☆ ★

110408-CX 9.525 3.97 3.81 0.8 ☆ ★
DNMG
150404-CX 12.7 4.76 5.16 0.4 ☆ ★
150408-CX 12.7 4.76 5.16 0.8 ☆ ★
090304-CX 9.525 3.18 3.81 0.4 ☆ ★
090308-CX 9.525 3.18 3.81 0.8 ☆ ★
120404-CX 12.7 4.76 5.16 0.4 ☆ ★
SNMG 120408-CX 12.7 4.76 5.16 0.8 ☆ ★
120412-CX 12.7 4.76 5.16 1.2 ☆ ★
150608-CX 15.875 6.35 6.35 0.8 ☆ ★
150612-CX 15.875 6.35 6.35 1.2 ☆ ★
160404-CX 9.525 4.76 3.81 0.4 ☆ ★
160408-CX 9.525 4.76 3.81 0.8 ☆ ★
TNMG
160412-CX 9.525 4.76 3.81 1.2 ☆ ★
☆ ★
060404-CX 9.525 4.76 5.16 0.4 ☆ ★
060408-CX 9.525 4.76 5.16 0.8 ☆ ★
WNMG 080404-CX 12.7 4.76 5.16 0.4 ☆ ★
080408-CX 12.7 4.76 5.16 0.8 ☆ ★
080412-CX 12.7 4.76 5.16 1.2 ☆ ★
120404-CX 12.7 4.76 5.16 0.4 ☆ ★
120408-CX 12.7 4.76 5.16 0.8 ☆ ★
120412-CX 12.7 4.76 5.16 1.2 ☆ ★
CNMG
160604-CX 15.875 6.35 6.35 0.4 ☆ ★
160608-CX 15.875 6.35 6.35 0.8 ☆ ★
160612-CX 15.875 6.35 6.35 1.2 ☆ ★

062

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-7 Inserts for processing castiron
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG20A

BPG05B
BPG251

BPG058

BPG318

BK10UF
BPC052
BPC053
BPC102

BPT05B

BPT15A

BPU206
BPS101
BPS251

BU810

BU820
ΦI.C Φd α

BK10
S R

普通车削
General Turning
060202-FW 6.35 2.38 2.8 0.2 7° ★ ★
060204-FW 6.35 2.38 2.8 0.4 7° ★ ★
09T302-FW 9.525 3.97 4.4 0.2 7° ★ ★
CCMT
09T304-FW 9.525 3.97 4.4 0.4 7° ★ ★
09T308-FW 9.525 3.97 4.4 0.8 7° ★ ★
120404-FW 12.7 4.76 5.5 0.4 7° ★ ★
070202-FW 6.35 2.38 2.8 0.2 7° ★ ★
070204-FW 6.35 2.38 2.8 0.4 7° ★ ★
DCMT 11T302-FW 9.525 3.97 4.4 0.2 7° ★ ★
11T304-FW 9.525 3.97 4.4 0.4 7° ★ ★
11T308-FW 9.525 3.97 4.4 0.8 7° ★ ★
09T304-FW 9.525 3.18 4.4 0.4 7° ★ ★
09T308-FW 9.525 3.18 4.4 0.8 7° ★ ★
SCMT

110302-FW 6.35 3.18 2.8 0.2 7° ★ ★

110304-FW 6.35 3.18 2.8 0.4 7° ★ ★
TCMT
16T304-FW 9.525 3.97 4.4 0.4 7° ★ ★

110302-FW 6.35 3.18 2.8 0.2 5° ★ ★

110304-FW 6.35 3.18 2.8 0.4 5° ★ ★
110308-FW 6.35 3.18 2.8 0.8 5° ★ ★
VBMT
160402-FW 9.525 4.76 4.4 0.2 5° ★ ★
160404-FW 9.525 4.76 4.4 0.2 5° ★ ★
160408-FW 9.525 4.76 4.4 0.2 5° ★ ★

063

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-7 Inserts for processing castiron
T rake

Grade recommendation
Dimension（mm）
金属陶瓷
The basic shape of blade Type
CVD coating grade PVD coating grade Cermet

BPG20A

BPG05B
BPG251

BPG058

BPG318
BPC052
BPC053
BPC102

BPT05B

BPT15A

BPU206
BPS101
BPS251

BN201
BN301
ΦI.C S Φd R α
General Turning

060204-MD 6.35 2.38 2.8 0.4 7° ☆ ★

060208-MD 6.35 2.38 2.8 0.8 7° ☆ ★
09T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★
CCMT 09T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★
120404-MD 12.7 4.76 5.5 0.4 7° ☆ ★
120408-MD 12.7 4.76 5.5 0.8 7° ☆ ★
120412-MD 12.7 4.76 5.5 1.2 7° ☆ ★
070204-MD 6.35 2.38 2.8 0.4 7° ☆ ★
070208-MD 6.35 2.38 2.8 0.8 7° ☆ ★
DCMT 11T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★
11T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★
11T312-MD 9.525 3.97 4.4 1.2 7° ☆ ★
09T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★
09T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★
09T312-MD 9.525 3.97 4.4 1.2 7° ☆ ★
SCMT
120404-MD 12.7 4.76 5.5 0.4 7° ☆ ★
120408-MD 12.7 4.76 5.5 0.8 7° ☆ ★
120412-MD 12.7 4.76 5.5 1.2 7° ☆ ★
090204-MD 5.56 2.38 2.5 0.4 7° ☆ ★
090208-MD 5.56 2.38 2.5 0.8 7° ☆ ★
110304-MD 6.35 3.18 2.8 0.4 7° ☆ ★
110308-MD 6.35 3.18 2.8 0.8 7° ☆ ★
TCMT
110312-MD 6.35 3.18 2.8 1.2 7° ☆ ★
16T304-MD 9.525 3.97 4.4 0.4 7° ☆ ★
16T308-MD 9.525 3.97 4.4 0.8 7° ☆ ★
16T312-MD 9.525 3.97 4.4 1.2 7° ☆ ★
110304-MD 6.35 3.18 2.8 0.4 7° ☆ ★
VCMT
110308-MD 6.35 3.18 2.8 0.8 7° ☆ ★
160404-MD 9.525 4.76 4.4 0.4 5° ☆ ★
VBMT
160408-MD 9.525 4.76 4.4 0.8 5° ☆ ★
0803MOE-R1 8 2.38 3.3 - 7° ☆ ★
10T3MOE-R1 10 3.97 4.5 - 7° ☆ ★
RCMT 1204MOE-R2 12 4.76 4.4 - 7° ☆ ★
1606MOE-R3 16 6.35 5.5 - 7° ☆ ★
2006MOE-R4 20 6.35 6.5 - 7° ☆ ★

064

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-7 Inserts for processing castiron
rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoating grade

BPG20A
BPG251

BPG318

BK10UF
BPC052
BPC053
BPC102

BPT15A

BPU206
BPS101
BPS251

BU810

BU820
ΦI.C S Φd R

BK10

General Turning
120404-CQ 12.7 4.76 5.16 0.4 ☆ ★
120408-CQ 12.7 4.76 5.16 0.8 ☆ ★
120412-CQ 12.7 4.76 5.16 1.2 ☆ ★
CNMG 120416-CQ 12.7 4.76 5.16 1.6 ☆ ★
160608-CQ 15.875 6.35 6.35 0.8 ☆ ★
160612-CQ 15.875 6.35 6.35 1.2 ☆ ★
160616-CQ 15.875 6.35 6.35 1.6 ☆ ★
110408-CQ 9.525 4.76 3.81 0.8 ☆ ★
110412-CQ 9.525 4.76 3.81 1.2 ☆ ★
150408-CQ 12.7 4.76 5.16 0.8 ☆ ★
DNMG
150412-CQ 12.7 4.76 5.16 1.2 ☆ ★
150608-CQ 12.7 6.35 5.16 0.8 ☆ ★
150612-CQ 12.7 6.35 5.16 1.2 ☆ ★
120408-CQ 12.7 4.76 5.16 0.8 ☆ ★
120412-CQ 12.7 4.76 5.16 1.2 ☆ ★
SNMG 120416-CQ 12.7 4.76 5.16 1.6 ☆ ★
150612-CQ 15.875 6.35 6.35 1.2 ☆ ★
150616-CQ 15.875 6.35 6.35 1.6 ☆ ★
160408-CQ 9.525 4.76 3.81 0.8 ☆ ★
160412-CQ 9.525 4.76 3.81 1.2 ☆ ★
TNMG
220408-CQ 12.7 4.76 5.16 0.8 ☆ ★
220412-CQ 12.7 4.76 5.16 1.2 ☆ ★
060408-CQ 9.525 4.76 3.81 0.8 ☆ ★
060412-CQ 9.525 4.76 3.81 1.2 ☆ ★
080404-CQ 12.7 4.76 5.16 0.4 ☆ ★
WNMG 080408-CQ 12.7 4.76 5.16 0.8 ☆ ★
080412-CQ 12.7 4.76 5.16 1.2 ☆ ★
080416-CQ 12.7 4.76 5.16 1.6 ☆ ★
160404-CQ 9.525 4.76 3.81 0.4 ☆ ★
160408-CQ 9.525 4.76 3.81 0.8 ☆ ★
VNMG 160412-CQ 9.525 4.76 3.81 1.2 ☆ ★

065

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-7 Inserts for processing castiron
rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG20A
BPG251

BPG318

BK10UF
BPC052
BPC053
BPC102

BPT15A

BPU206
BPS101
BPS251

BU810

BU820
ΦI.C Φd

BK10
S R
General Turning

120408-RA 12.7 4.76 5.16 0.8

120412-RA 12.7 4.76 5.16 1.2
120416-RA 12.7 4.76 5.16 1.6
CNMG 160612-RA 15.875 6.35 6.35 1.2
160616-RA 15.875 6.35 6.35 1.6
190612-RA 19.05 6.35 7.93 1.2
190616-RA 19.05 6.35 7.93 1.6
150408-RA 12.7 4.76 5.16 0.8
150412-RA 12.7 4.76 5.16 1.2
DNMG 150608-RA 12.7 6.35 5.16 0.8
150612-RA 12.7 6.35 5.16 1.2
150616-RA 12.7 6.35 5.16 1.6
120408-RA 12.7 4.76 5.16 0.8
120412-RA 12.7 4.76 5.16 1.2
120416-RA 12.7 4.76 5.16 1.6
SNMG 150612-RA 15.875 6.35 6.35 1.2
150616-RA 15.875 6.35 6.35 1.6
190616-RA 19.05 6.35 7.93 1.6
250724-RA 25.4 7.94 9.12 2.4
160408-RA 9.525 4.76 3.81 0.8
160412-RA 9.525 4.76 3.81 1.2
160416-RA 9.525 4.76 3.81 1.6
TNMG
220408-RA 12.7 4.76 5.16 0.8
220412-RA 12.7 4.76 5.16 1.2
220416-RA 12.7 4.76 5.16 1.6
060408-RA 9.525 4.76 3.81 0.8
060412-RA 9.525 4.76 3.81 1.2
WNMG
080408-RA 12.7 4.76 5.16 0.8
080412-RA 12.7 4.76 5.16 1.2

066

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-7 Inserts for processing castiron

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoating grade

BPG20A
BPG251

BPG318

BK10UF
BPC052
BPC053
BPC102

BPT15A

BPU206
BPS101
BPS251

BU810

BU820
ΦI.C S Φd R

BK10

General Turning
120408-GH 12.7 4.76 5.16 0.8 ★
120412-GH 12.7 4.76 5.16 1.2 ★
120416-GH 12.7 4.76 5.16 1.6 ★
CNMG 160608-GH 15.875 6.35 6.35 0.8 ★
160612-GH 15.875 6.35 6.35 1.2 ★
190608-GH 19.05 6.35 7.93 0.8 ★
190612-GH 19.05 6.35 7.93 1.2 ★
110408-GH 9.525 4.76 3.81 0.8 ★
150408-GH 12.7 4.76 5.16 0.8 ★
DNMG
150608-GH 12.7 6.35 5.16 0.8 ★

120408-GH 12.7 4.76 5.16 0.8 ★

120412-GH 12.7 4.76 5.16 1.2 ★
SNMG
150608-GH 15.875 6.35 6.35 0.8 ★
150612-GH 15.875 6.35 6.35 1.2 ★
160408-GH 9.525 4.76 3.81 0.8 ★
160412-GH 9.525 4.76 3.81 1.2 ★
TNMG
220408-GH 12.7 4.76 5.16 0.8 ★
220412-GH 12.7 4.76 5.16 1.2 ★
060408-GH 9.525 4.76 3.81 0.8 ★
060412-GH 9.525 4.76 3.81 1.2 ★
WNMG 080408-GH 12.7 4.76 5.16 0.8 ★
080412-GH 12.7 4.76 5.16 1.2 ★
080416-GH 12.7 4.76 5.16 1.6 ★

067

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

rake

Grade recommendation
Dimension（mm）

B The basic shape of inserts Type

CVD coating grade PVD coating grade Uncoating grade

BPG20A
BPG251

BPG318

BK10UF
BPC052
BPC053
BPC102

BPT15A

BPU206
BPS101
BPS251

BU810

BU820
ΦI.C Φd
General Turning

S R

BK10

068

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-8 Aluminum processing Grades
N Aluminum processing

a Grade for coating

Grade ISO classification Surface color Applications Recommended

General Turning
BPU109★ N10(N01-N15) DLC color Diamond coating grade, the coating can reduce BUE,obtain higher surface quality. Suitable for aluminum, magnesium, copper, brass, plastic
finishing to roughing processing.

b Grade for uncoating

Application

069

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B1-8 Aluminum processing

rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BK10UF
BPU109

BU810
ΦI.C S Φd R

BK10
General Turning

120404-LH 12.7 4.76 5.16 0.4 ☆ ★

120408-LH 12.7 4.76 5.16 0.8 ☆ ★
CNGG
120412-LH 12.7 4.76 5.16 1.2 ☆ ★

150404-LH 12.7 4.76 5.16 0.4 ☆ ★

150408-LH 12.7 4.76 5.16 0.8 ☆ ★
DNGG
150604-LH 12.7 6.35 5.16 0.4 ☆ ★
150608-LH 12.7 6.35 5.16 0.8 ☆ ★
120404-LH 12.7 4.76 5.16 0.4 ☆ ★
120408-LH 12.7 4.76 5.16 0.8 ☆ ★
SNGG
120412-LH 12.7 4.76 5.16 1.2 ☆ ★

160404-LH 9.525 4.76 3.81 0.4 ☆ ★

160408-LH 9.525 4.76 3.81 0.8 ☆ ★
TNGG 160412-LH 9.525 4.76 3.81 1.2 ☆ ★
220408-LH 12.7 4.76 5.16 0.8 ☆ ★
220412-LH 12.7 4.76 5.16 1.2 ☆ ★
160404-LH 9.525 4.76 3.81 0.4 ☆ ★
160408-LH 9.525 4.76 3.81 0.8 ☆ ★
VNGG

060404-LH 9.525 4.76 3.81 0.4 ☆ ★

060408-LH 9.525 4.76 3.81 0.8 ☆ ★
WNGG 080404-LH 12.7 4.76 5.16 0.4 ☆ ★
080408-LH 12.7 4.76 5.16 0.8 ☆ ★
080412-LH 12.7 4.76 5.16 1.2 ☆ ★

070

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-8 Aluminum processing
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BK10UF
BPU109

BU810
ΦI.C S Φd R α

BK10

General Turning
060202-LH 6.35 2.38 2.8 0.2 7° ☆ ★
060204-LH 6.35 2.38 2.8 0.4 7° ☆ ★
060208-LH 6.35 2.38 2.8 0.8 7° ☆ ★
09T302-LH 9.525 3.97 4.4 0.2 7° ☆ ★
CCGT 09T304-LH 9.525 3.97 4.4 0.4 7° ☆ ★
09T308-LH 9.525 3.97 4.4 0.8 7° ☆ ★
120402-LH 12.7 4.76 5.5 0.2 7° ☆ ★
120404-LH 12.7 4.76 5.5 0.4 7° ☆ ★
120408-LH 12.7 4.76 5.5 0.8 7° ☆ ★
070202-LH 6.35 2.38 2.8 0.2 7° ☆ ★
070204-LH 6.35 2.38 2.8 0.4 7° ☆ ★
070208-LH 6.35 2.38 2.8 0.8 7° ☆ ★
DCGT 11T302-LH 9.525 3.97 4.4 0.2 7° ☆ ★
11T304-LH 9.525 3.97 4.4 0.4 7° ☆ ★
11T308-LH 9.525 3.97 4.4 0.8 7° ☆ ★
11T312-LH 9.525 3.97 4.4 1.2 7° ☆ ★
09T302-LH 9.525 3.97 4.4 0.2 7° ☆ ★
09T304-LH 9.525 3.97 4.4 0.4 7° ☆ ★
09T308-LH 9.525 3.97 4.4 0.8 7° ☆ ★
120402-LH 12.7 4.76 5.5 0.2 7° ☆ ★
SCGT
120404-LH 12.7 4.76 5.5 0.4 7° ☆ ★
120408-LH 12.7 4.76 5.5 0.8 7° ☆ ★
120412-LH 12.7 4.76 5.5 1.2 7° ☆ ★
120416-LH 12.7 4.76 5.5 1.6 7° ☆ ★

071

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-8 Aluminum processing
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BK10UF
BPU109

BU810
ΦI.C S Φd R α

BK10
General Turning

090202-LH 5.56 2.38 2.5 0.2 7° ☆ ★

090204-LH 5.56 2.38 2.5 0.4 7° ☆ ★
090208-LH 5.56 2.38 2.5 0.8 7° ☆ ★
110202-LH 6.35 2.38 2.8 0.2 7° ☆ ★
110204-LH 6.35 2.38 2.8 0.4 7° ☆ ★
TCGT
110208-LH 6.35 2.38 2.8 0.8 7° ☆ ★
16T302-LH 9.525 3.97 4.4 0.2 7° ☆ ★
16T304-LH 9.525 3.97 4.4 0.4 7° ☆ ★
16T308-LH 9.525 3.97 4.4 0.8 7° ☆ ★
16T312-LH 9.525 3.97 4.4 1.2 7° ☆ ★
110302-LH 6.35 3.18 2.8 0.2 7° ☆ ★
110304-LH 6.35 3.18 2.8 0.4 7° ☆ ★
110308-LH 6.35 3.18 2.8 0.8 7° ☆ ★
130302-LH 7.86 3.18 3.4 0.2 7° ☆ ★
130304-LH 7.86 3.18 3.4 0.4 7° ☆ ★
VCGT 160402-LH 9.525 4.76 4.4 0.2 7° ☆ ★
160404-LH 9.525 4.76 4.4 0.4 7° ☆ ★
160408-LH 9.525 4.76 4.4 0.8 7° ☆ ★
160412-LH 9.525 4.76 4.4 1.2 7° ☆ ★
220520-LHC 12.7 5.96 5.5 2 7° ☆ ★
220530-LHC 12.7 5.96 5.5 3 7° ☆ ★
110302-LH 6.35 3.18 2.8 0.2 5° ☆ ★
110304-LH 6.35 3.18 2.8 0.4 5° ☆ ★
110308-LH 6.35 3.18 2.8 0.8 5° ☆ ★
160402-LH 9.525 4.76 4.4 0.2 5° ☆ ★
160404-LH 9.525 4.76 4.4 0.4 5° ☆ ★
VBGT
160408-LH 9.525 4.76 4.4 0.8 5° ☆ ★
160412-LH 9.525 4.76 4.4 1.2 5° ☆ ★
220516-LH 12.7 5.96 5.5 1.6 5° ☆ ★
220525-LH 12.7 5.96 5.5 2.5 5° ☆ ★
220530-LH 12.7 5.96 5.5 3 5° ☆ ★
0602MO-LH 6 2.38 2.5 - 7° ☆ ★
0803MO-LH 8 3.18 3.4 - 7° ☆ ★
RCGT 1003MO-LH 10 3.18 4.4 - 7° ☆ ★
10T3MO-LH 10 3.97 4.4 - 7° ☆ ★
1204MO-LH 12 4.76 5.5 - 7° ☆ ★

072

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-8 Aluminum processing
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BK10UF
BPU109

BU810
ΦI.C S Φd R α

BK10

General Turning
11T304-LH2 9.525 3.97 4.4 0.4 7° ☆ ★
11T308-LH2 9.525 3.97 4.4 0.8 7° ☆ ★
DCGT

16T304-LH2 9.525 3.97 4.4 0.4 7° ☆ ★

16T308-LH2 9.525 3.97 4.4 0.8 7° ☆ ★
TCGT

160404-LH2 9.525 4.76 4.4 0.4 7° ☆ ★

160408-LH2 9.525 4.76 4.4 0.8 7° ☆ ★
VCGT

220530-LH2 12.7 5.96 5.5 3 11° ☆ ★

VPGT

1103003L-E 6.35 3.18 2.8 0.03 11° ☆ ★

110301L-E 6.35 3.18 2.8 0.1 11° ☆ ★
110302L-E 6.35 3.18 2.8 0.2 11° ☆ ★
VPET
1103003R-E 6.35 3.18 2.8 0.03 11° ☆ ★
110301R-E 6.35 3.18 2.8 0.1 11° ☆ ★
110302R-E 6.35 3.18 2.8 0.2 11° ☆ ★
060202-LH3 6.35 2.38 2.8 0.2 7° ☆ ★
060204-LH3 6.35 2.38 2.8 0.4 7° ☆ ★
09T302-LH3 9.525 3.97 4.4 0.2 7° ☆ ★
CCGT
09T304-LH3 9.525 3.97 4.4 0.4 7° ☆ ★
09T308-LH3 9.525 3.97 4.4 0.8 7° ☆ ★
120404-LH3 12.7 4.76 5.5 0.4 7° ☆ ★
070202-LH3 6.35 2.38 2.8 0.2 7° ☆ ★
070204-LH3 6.35 2.38 2.8 0.4 7° ☆ ★
DCGT 11T302-LH3 9.525 3.97 4.4 0.2 7° ☆ ★
11T304-LH3 9.525 3.97 4.4 0.4 7° ☆ ★
11T308-LH3 9.525 3.97 4.4 0.8 7° ☆ ★
110204-LH3 6.35 2.38 2.8 0.4 7° ☆ ★
16T304-LH3 9.525 3.97 4.4 0.4 7° ☆ ★
TCGT

073

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-8 Aluminum processing
T rake

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BK10UF
BPU109

BU810
ΦI.C S Φd R α

BK10
General Turning

110302-LH3 6.35 3.18 2.8 0.2 7° ☆ ★

110304-LH3 6.35 3.18 2.8 0.4 7° ☆ ★
VCGT 160402-LH3 9.525 4.76 4.4 0.2 7° ☆ ★
160404-LH3 9.525 4.76 4.4 0.4 7° ☆ ★
160408-LH3 9.525 4.76 4.4 0.8 7° ☆ ★
11T302-LA 9.525 3.97 4.4 0.2 7° ☆ ★
11T304-LA 9.525 3.97 4.4 0.4 7° ☆ ★
DCGT
11T308-LA 9.525 3.97 4.4 0.8 7° ☆ ★

110302-LA 6.35 3.18 2.8 0.2 7° ☆ ★

110304-LA 6.35 3.18 2.8 0.4 7° ☆ ★
VCGT 160402-LA 9.525 4.76 4.4 0.2 7° ☆ ★
160404-LA 9.525 4.76 4.4 0.4 7° ☆ ★
160408-LA 9.525 4.76 4.4 0.8 8° ☆ ★

074

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-8 Aluminum processing

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BK10UF
BPU109

BU810
R

BK10
L B B1 S

General Turning
GIPA7YZ-35V-1.2-LH 30 7.2 6 8.2 1.2 ★

GDMA840-LH 30 8 5.6 8.2 4 ★

400-A-LH 21 4 3.3 4.8 2 ★

500-A-LH 26 5 4.1 5.8 2.5 ★
MRGN
600-A-LH 26 6 5 5.8 3 ★
800-A-LH 31 8 6 6.5 4 ★

GIP600E-3.00-LH 18 6 4.8 6.5 3 ★

B1-9
Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG251

BPG058
BPT05B
BPT15A

BPU206
BPS101
BPS251
BPS302
BPS153

BPT056

BM15A
BM25A
BN201
BN301

α
BM10

ΦI.C S Φd

0802MO-V1 8 2.38 3.3 15° ☆ ★

RDMT 10T3MO-V1 10 3.97 4.5 15° ☆ ★
1204MO-V2 12 3.18 4.4 15° ☆ ★
1203MO-V2 12 4.76 4.4 11° ☆ ★
RPMT
16T4MO-V3 16 4.96 5.5 11° ☆ ★

075

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-10 Peeling inserts

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPU206
BPP302

BPS102

BPS251

BPS302

BPS351

BPP256
a

BP35
B L S L1

YW1

YW2
YT5
General Turning

121517 12 31 7.5 17 1.5 ★ ★ ☆

182020 18 37 12 20 2 ★ ★ ☆
LPUC 182027 18 43 12 27 2 ★ ★ ☆
183020 18 43 12 20 3 ★ ★ ☆
183027 18 47 12 27 3 ★ ★ ☆
121517 12 31 7.5 17 1.5 ★ ★ ☆
182020 18 37 12 20 2 ★ ★ ☆
LNUC 182027 18 43 12 27 2 ★ ★ ☆
183020 18 43 12 20 3 ★ ★ ☆
183027 18 47 12 27 3 ★ ★ ☆
20.171138R 17.5 38.3 12 27 ★ ★ ☆

XNGX

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPU206
BPP302

BPS102

BPS251

BPS302

BPS351

BPP256

BP35
B L S B1

YW1

YW2
YT5

LNGF 4012 20 40 12.4 12.15 ★ ★ ☆

LNGF 3008-F 12 30 7.5 17.5 ★ ★ ☆

076

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B1-9 Peeling inserts

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPU206
BPP302

BPS102

BPS251

BPS302

BPS351

BPP256

BP35
I.W W S a

YW1

YW2
YT5

General Turning
1812L 18 22 12 20° ★ ★ ☆
2518173L 25 25 18 7° ★ ★ ☆
YNMX
1812150L 18 18 12 15° ★ ★ ☆

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG363
BPG253

BPU206
BPS251
BPS101
BPS351

BPP256

BU820
BP35

BP20
La L I.W S R
YW2
YT5

160405L11 16 16.15 9.525 4.76 0.5 ☆ ★ ☆ ☆ ☆

160410L11 16 16.15 9.525 4.76 1 ☆ ★ ☆ ☆ ☆
IW

KNUX
160405R11 16 16.15 9.525 4.76 0.5 ☆ ★ ☆ ☆ ☆
160410R11 16 16.15 9.525 4.76 1 ☆ ★ ☆ ☆ ☆

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG363
BPG253

BPU206
BPS251
BPS101
BPS351

BPP256

BU820

φD
BP35

BP20

L I.W S R
YW2
YT5

160405L11-2 16.15 9.525 3.38 4.76 0.5 ☆ ★

☆ ☆ ☆ ☆
160410L11-2 16.15 9.525 3.38 4.76 1 ☆ ★
☆ ☆ ☆ ☆
KNUX
160405R11-2 16.15 9.525 3.38 4.76 0.5 ☆ ★
☆ ☆ ☆ ☆
160410R11-2 16.15 9.525 3.38 4.76 1 ☆ ★
☆ ☆ ☆ ☆

077

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-1 Turning toolholders overview

B
General Turning

083 084 087 085

086 088 101 087

102 089 090 086

091 094 091 093

092 094 093 104

105 094 104 095

096 095 103 096

099 100 100 099

078

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-1 Turning toolholders overview

098 103 098 105

B

General Turning
097 098

108 109 109 111

110 110 112 113

114 115 116 118

117

125 127 124 124

079

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-2 Extemal turning tools code key

B P
General Turning

080

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

L
w B

General Turning
E 70
F 80

081

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B
普通车削
General Turning

082

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

General Turning

083

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

B
General Turning

084

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

General Turning

085

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

B
General Turning

086

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

General Turning

087

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

B
General Turning

088

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

General Turning

089

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

B
General Turning

090

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

General Turning

091

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

B
普通车削
General Turning

092

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

普通车削
General Turning

093

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

B
General Turning

094

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

普通车削
General Turning

1212E07

095

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

B
普通车削
General Turning

096

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

普通车削
General Turning

097

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning
B2-3 Extemal turning tools

B
普通车削
General Turning

098

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

General Turning

099

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

B
General Turning

100

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

普通车削
General Turning

101

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

B
普通车削
General Turning

102

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

General Turning

103

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

B
General Turning

104

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-3 Extemal turning tools

General Turning

105

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-4 Internal turning tools code key

B Steel Pole With

General Turning

lnner cooler hole

lnner
cooler hole

Steel Pole

For special inserts

106

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

General Turning

107

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

B
General Turning

Spare
_ maching

Minmum processing diameter

108

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

General Turning
Spare
_ maching

Minmum processing diameter

22.5

17
22.5

33

Spare
_ maching

Minmum processing diameter

109

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

B
General Turning

Spare
_ maching

Minmum processing diameter

Spare

_ maching

Minmum processing diameter

110

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

General Turning
Spare
_ maching

Minmum processing diameter

Spare

Minmum processing diameter

32

111

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

B
General Turning

Spare

Minmum processing diameter

14

112

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

General Turning
Spare

Minmum processing diameter

113

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

B
General Turning

Spare

Minmum processing diameter

114

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

General Turning
Spare

Minmum processing diameter

Spare

Minmum processing diameter

115

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

B
General Turning

Spare

Minmum processing diameter

116

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

General Turning
Spare

Minmum processing diameter

Spare

Minmum processing diameter

117

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 B General Turning

B2-5 Internal turning tools

B
General Turning

Spare

Minmum processing diameter

118

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
c Parting and grooving

c1 Parting and grooving blade moterial 120

c2 Parting and grooving tools

122

c3 Grooving tools 124

[Link] 119
 Parting and grooving

C1 parting and grooving blade materials

P Process on steel

Grade ISO classification Surface color Applications Recommended

BPS253 P20 (P10-P35) yellow

CVD coated carbide grade, with thick wear-resistance coating on the general gradient sintered substrate . For Finishing to roughing on steel and
cast steel. Good use for steel continuous cutting as well as interrupted cutting.

C
Parting Grooving

BPG20A P25 (P15–P45) yellow

General used grade, for parting, grooving and turning [Link] performance when worked on low carbide steel and other viscous material.

BPG318 P30 (P15-P45) purple yellow

PVD coated miro-grains carbide grade . This updated PVD coated carbide grade is a excellert general grade . First choice for parting process
on steel tubular goods. Good performance for grooving and turning process . Best with Low to Medium cutting speed and feed rate.

BPG363 P45(P30-P50) yellow

CVD-coated cemented carbide grades with high strength base body, providing excellent edge security. For steel and cast steel roughing in the
most bad conditions. Can work at low speed overload interrupted cutting.

M Process on stainless steel

Grade ISO classification Surface color Applications Recommended

BPT056 M15 (M05-M20) reddish brown

New thin TiAlN PVD Coating with very good anchoring strength even on the cutting [Link] only with good strength and wear on the flank with
uniform, but also with good performance. Good used for finishing process with high cutting speed on Stainless steel.

BPG318 M25 (M15-M35) purple yellow

Improved PVD general grade. Good wear-resistance and good protection for the cutting edge when used for stainless steel process. First choice
on grooving and turning process . Parting process is also good especially for parting tubing. Best with Medium to low cutting speed.

BPG20A M25 (M15-M35) yellow Good general used PVD coating grade . Good wear-resistance and good protection for the cutting edge when used for stainless steel process.
One good choice for grooving and turning process . Parting process is also good especially for parting tubing. Best with Medium to low cutting
speed.

120

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Parting and grooving

C1 parting and grooving blade materials

K Process on cost iron

Grade ISO classification Surface color Applications Recommended

BPS253 K25 (K10 - K35) yellow

General used CVD coating grade . High wear- resistance and good cutting strength . Best with medium to high cutting speed for grooving and
turning process .also good performance on tubing parting .

BPG318 K30 (K15-K35) purple yellow

C

Parting Grooving
General PVD coating grade , be used for high strength requied process and interruped cutting process. Good coating provides good protection
on cutting edge . Best with Medium to low cutting speed.

BPG20A K30 (K15-K35) yellow

General PVD coating grade , be used for high strength requied process and interruped cutting process,with medium to low cutting speed.

N Process on Non-ferrous metals

Grade ISO classification Surface color Applications Recommended

BU810 N10 (N05-N15)

Uncoated carbde grade, with good sharpness , best used for aluminum cutting process and aluminum interruped cutting process.

BPG20A N25 (N15-N20) yellow

PVD coated grade, used for high high strength requied process , recommend for interruped cutting process

BPG318 N25 (N15-N35) purple yellow

PVD coated grade, used for high high strength requied process , recommend for interruped cutting process

BPT15A N15 (N10-N20) yellow PVD coating with Fine grain cemented carbide can be used in the situation that sharp cutting edge is required. The integration of the hard body,
excellent blade safety and the High wear resistant coating is much more suitable for the high toughness required procedure in nonferrous
materials’ cutting.

121

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Parting and grooving

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG20A
BPG363

BPG318

BPU206
BPT15A

BPU200
BPS253

BPT053

BPT056

BU810

BU820
r

BP35
B L

200 2.2 9.3 0.2 ★ ★

C BP
300
400
31
4.1
11.3
11.3
0.2
0.25
★
★
★
★
Parting Grooving

B 500 5.1 11.4 0.3 ★ ★

600 6.4 11.4 0.35 ★ ★
200L 2.2 9.3 0.2 ★ ★
300L 31 11.3 0.2 ★ ★
BP 400L 4.1 11.3 0.25 ★ ★
B 500L 5.1 11.4 0.3 ★ ★
600L 6.4 11.4 0.35 ★ ★
200R 2.2 9.3 0.2 ★ ★
300R 31 11.3 0.2 ★ ★
BP 400R 4.1 11.3 0.25 ★ ★
B 500R 5.1 11.4 0.3 ★ ★
600R 6.4 11.4 0.35 ★ ★

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG363

BPG318
BPT15A

BPU200
BPU206
BPG20A
BPS253

BPT053

BPT056

BU810
BU820
BP35
B R L D S

200-M 2 0.2 16 1.2 3.5 ★ ☆ ★ ☆

250-M 2.5 0.2 18.5 2 3.85 ★ ☆ ★ ☆
MGMN 300-M 3 0.4 21 2.35 4.8 ★ ☆ ★ ☆
400-M 4 0.4 21 3.3 4.8 ★ ☆ ★ ☆
500-M 5 0.8 26 4.1 5.8 ★ ☆ ★ ☆
150-G 1.5 0.15 16 1.2 3.5 ★ ☆ ★ ☆
200-G 2 0.2 16 1.6 3.5 ★ ☆ ★ ☆
250-G 2.5 0.2 18.5 2 3.85 ★ ☆ ★ ☆
MGMN
300-G 3 0.4 21 2.35 4.8 ★ ☆ ★ ☆
400-G 4 0.4 21 3.3 4.8 ★ ☆ ★ ☆
500-G 5 0.8 26 4.1 5.8 ★ ☆ ★ ☆

122

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 C Parting and grooving

C2

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoating grade

BPG20A
BPG363

BPG318
BPT15A

BPU200
BPU206
BPS253

BPT053

BPT056

BU810
BU820
B R L D S

BP35
D GIP600E-3.00-LH
6 3 18 4.8 6.5 ★
C

Parting Grooving
200-M 2 1 16 1.5 3.5 ★ ☆ ★ ☆
300-M 3 1.5 21 2.35 4.8 ★ ☆ ★ ☆
S

MRMN
400-M 4 2 21 3.3 4.8 ★ ☆ ★ ☆
500-M 5 2.5 25.86 4.12 5.8 ★ ☆ ★ ☆
S

400-F 4 0.2 25.35 3.23 5.71 ★ ☆ ★ ☆

L MGME
B

R
D

TDJ2 2 0.2 20 1.7 3.9 ★ ☆ ★ ☆

★ ☆ ★ ☆
S

TDJ3 3 0.2 20 2.4 4

L
4-R0.2 TDJ4 4 0.3 19.76 3 4.05 ★ ☆ ★ ☆
D

TDC2 2 0.2 20 1.7 3.84 ★ ☆ ★ ☆

S

L TDC3 3 0.2 20 2.4 4 ★ ☆ ★ ☆

R TDC4 4 0.3 20 3 4.03 ★ ☆ ★ ☆
B

TDC5 5 0.3 25 4 4.89 ★ ☆ ★ ☆

D

3.18 0.8 20.7 2.31 4.52 ★ ☆ ★ ☆

R N123G2-0318-0008-GF
D

DGN3102C 3.1 0.2 20 2.4 5.81 ★ ☆ ★ ☆

s

GRIP4004Y 4 0.4 18.93 2.85 5.58 ★ ☆ ★ ☆

D
R

123

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 C arting and grooving
P

C3

C
Parting Grooving

124

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 C Parting and grooving

C3

Parting Grooving

125

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 C Parting and grooving

C3

C
Parting Grooving

126

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 C Parting and grooving

C3

Parting Grooving

127

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 128

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
D Milling

切断切槽
Parting Grooving
D1 List of milling inserts........................................................... 130

D2 Grade for milling inserts........................................................... 132

D3 Naming rules for indexable milling inserts............................................... 134

D4 Inserts for face milling............................................................. 136

D5 Inserts for heavy-cutting milling ......................................................146

D6 Inserts for shallow hole drilling................................................150

D7 Inserts for profile milling ................................................ 151

D8 Inserts for square shoulder milling........................................ 152

D9 Cham fering Tovl....................................................... 154

D10 Milling Inserts for shape “T” workpiele.....................................154

D11 Inserts for high feed milling ............................................. 155

D12 Inserts for aluminum prcessing milling ................................... 156

D13 Others................................................................ 158

D14 Reversible inserts...................................................... 160

D15 Milling Technical information............................................. 163

[Link] 129
 D Milling

D1 List of milling inserts

136 136 136 137 137 138 138 138

TPCW**PDL/R TPMR** TPCN**PDL/R TPCN**PPN SPKW**EDFL/R SEEW**AFN SEKT**AESN SNCN**ANN
Inserts for face milling

139 139 140 140 141 141 141 142

SNCN**ENN SPGN** SPCN**APN SPEX**EDL/R SEMN**AFTN SPMR** SEKR**-AZ-YM SPMT**-D51

D LPMT**-D51
142
SPKN**EDFL/R
142
SP*N**EDL/R
143
SP*N**ZETL/R
143
SDHW**AEFN
143
OFMT**NN
144
HEEN532
144
OFER**NN
144
Milling

144 145 145

ODHW0504ZZN RPMT**MOE-G(BJS) RPMW**MOE

146 146 146 146 146 146 147 147

Inserts for heavy-cutting milling

CNE* CDE* LNE* N18404-JH N18-1 SNE(C)* GLOL20023R4 GLOL22022R5

147 147 148 148 148 148 149 149

SNE*-R3 LNE323-02 SN**P* SN**R* GLOL**R5 SN55** LNE*R13 LNHX**

149 149
LNKX**PN-N-MM DIN7**
Inserts for shallow hole drilling

150 150 150 151 151

SPGT*-PM* SPMG-ZV APMT**-WT TPMX**-RG WCGX**-ZV
Inserts for profile milling

151 151
ZDET**R* SPMT**
Inserts for square shoulder milling

152 152 152 152 152 153 153 153

APMT**-H2 APMT**-M2 APMT**-EM APKT**-G2 APKW** APKT**-30 APKT**-LMNA BR390*-PM

153 153
BR390-11T308-PL AOMT**R-FA

130

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D1 List of milling inserts

Inserts for chamfer milling

154
SPMT**
Tnserts for T-Slot milling

MPHT**-DM
154 D

Milling
Inserts for high feed milling

155 155
SDMT**-DM WPGT**-ZSR
Aluminum processing

156 156 156 156 156 156 157 157

APKT**-LH APKT**PDFR-LH S**T**A*FN-LH2 SDKT**A*FN-LH OFGR**-LH RCGT**MO*-LHC XDGT**PDFR-LH XEKT**FR-LH

157
XPGT**PDFR-LH

158 158 158 158 158 158 158 158

Others

P22215-** P28* P284* P2800-* P2816-1 P2894-* P2803-1* P28451-1

159 159 159 159 159 159 160

P2922* P28467-* P28475-* P270* P2703-*R P270* P2603-*
Clamping system inserts

160 161 161 161 162

3** 3XH** 4XH** 4X** 4**

131

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D2 G rade for milling inserts

P Process steel

Grade ISO classification Surface color Applications Recommended

Black/yellow ,
BPS201 P20(P10-P25)
The most efficienct choice with Coated carbide grade for steel milling . The dry machining grade has high chip removal rate.

BPU206 P20(P15-P35)
reddish brown black Using high strength, high wear resistance and with loss Phase Equilibrium ultrafine grain substrate with PVD TiAlN coating,It is suitable for most
of the material machining,can achieve a stable turning and milling.
D
Milling

Black/yellow
BPS301 P30(P25-P40) General grade for modern processing, to achieve a good balance between the reliability and high production efficiency. Coated carbide grade for
unalloyed and low-alloy steel from light to heavy milling (both wet or dry machining). The first choice for face milling, preferred scheme to ensure
the shoulder milling with high production efficiency.

BPG308 P30(P15-P35) earth yellow

PVD coated carbide grade , for example, the long cutting edge, clogging, deep shoulder milling, long overhang, milling processes. or an alternative
choice of toughness [Link] the peripheral-edge grinding blade, preferred for viscous material, such as low carbon steel.

BPG20A P30(P15-P30) yellow PVD coated carbide grade is for light milling on [Link] the peripheral-edge grinding blade, preferred for viscous material,catting such as
low carbon steel.

BPS401 P40(P35-P50) Black/yellow

Toughness coated carbide grade for steel milling in demanding [Link] vertical milling and shoulder milling, the grade BPS401 should be
working in stable conditions, such as short overhangs, surface milling, shallow shoulder [Link] other process,BPS401 is the best choice.
suitable for mixed materials small batch production. Whether the coolant is supplied or not excellent.

Black/yellow
BPS411 P30(25-P40)
High-strengln bady combined with AL203 coaling is suitable for sleel and cast iron milling

K Process on cost iron

Grade ISO classification Surface color Applications Recommended

BPC201 K15-K25 black/yellow

CVD coated carbide grade for gray cast iron semi-finishing to roughing milling, mainly in dry conditions. Having a long expected tool life from the
medium to high cutting speeds.

BPG108 K05-K15 Purple yellow

CVD coated carbide grade for gray cast iron and ductile cast iron semi-finishing to roughing milling, mainly used in dry conditions.

BPC402 K30(K25-K40) black Toughness coated carbide grade for demanding milling of cast iron, such as ductile cast iron, wet conditions or high tensile strength cast iron.
Under low to medium cutting speed, the cutting tools can have a long tool life.

132

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D2 Grade for milling inserts

M Process on stainless steel

Grade ISO classification Surface color Applications Recommended

BPU206 P20(P15-P35)
reddish brown black Using high strength, high wear resistance and with loss Phase Equilibrium ultrafine grain substrate with PVD TiAlN coating,It is suitable for most
of the material machining,can achieve a stable turning and milling.

BPG403 M35(M20-M40) yellow

Coated carbide grade for medium speed milling abrasive trends stainless steel, such as casting parts, ferritic / martensitic stainless steel, and PH
steel, can also be used for mix materials small batch production.
D

Milling
BPT403 M45(M30-M45) yellow High toughness of the MT-CVD-coated cemented carbide, for high toughness stainless steel milling,also suitable for use in abrasive trend,
such as the medium-speed machining cast parts, ferritic / martensitic stainless steel and PHsteel. Also be used for small volume production
of the mixed material.

BPT30B M25(M15-M35)
green dark gray PVD coated carbide for high speed milling in stable conditions,suitable for the requirements of safe milling edge line and high-reliability , such
as in viscous austenitic and duplex stainless steel materials processing,preferred to dry cutting is but wet also suitable.

N Non-ferrous metals

Cermet

133

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Milling

D3 Code key for indexable milling inserts

Metric
Insert Shape / Code
Code With/Without With/Without Section plane of Insert Code With/Without With/Without Section plane of
hole chipbreaker hole chipbreaker

With Without Without Without

With Single-side Without Single-side

With Without Without Double-side

D With Double-side With Without

Milling

With Without With Single-side

With Single-side With Double-side

With Without Special

Others With Double-side

Insert shape Chipbreaker and clamping system

S P K N
Tolerance
Clearance angle of
main cutting edge

Clearance Clearance
Code angle Code angle

“m” (R eference) details of M-class tolerance ( identifed by shape and size)

Inscribed circle Thickness
S1
Code tolerance range ØD 1 Nose height tolerance(mm)
Tolerance(mm) Tolerance(mm)
Inscribed Regular Square Diamond Diamond Diamond
circle with 80o with 55o with 35o Round

・
Tolerance of Inscribed Circle ØD1(mm )

Inscribed Regular Diamond Diamond Diamond

Square
circle triangle with 80o with 55o with 35o Round

Other
clearance
angle

134

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Milling

Insert shape
Thickness is defined as height from bottom of insert
to the highest part of cutting edge.
Diameter of IC Code
Insert thickness(mm)

2.78
D

Milling
19 10

25

Length of cutting edge Insert thickness

12 04 AF T N
Wiper Chamfer (mm) Chipbreaker code

Cutting direction

Right hand

Left hand

Neutral

Others

No mark
Others
135

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPC201

BPG20A
BPG30A
BPU10B
BPS201

BPS401
BPC401

BPG308
BPT30B

BPU200
BPU206
BPS303

BPS403

BPC056

BN201
BN301

BU820
BP35
ΦI.C S d bs be α

90° S
I.C 2204PDL/R 12.7 4.76 5.5 1.4 0.7 11° ☆ ☆ ★ ☆ ★ ★
TPCW
be

2204PPL/R 12.7 4.76 5.5 1.4 0.7 11° ☆ ☆ ★ ☆ ★ ★

αd

bs
D
Milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPC201

BPC401

BPG20A
BPG30A
BPU10B
BPS201

BPS401

BPG308
BPT30B

BPC056
BPU200
BPU206
BPS303

BPS403

BN201
BN301

BU820
BP35
ΦI.C S r α

90204 5.56 2.38 0.4 11° ☆ ☆ ★ ☆ ★ ★

S
I.C 110304 6.35 3.18 0.4 11° ☆ ☆ ★ ☆ ★ ★
TPMR
110308 6.35 3.18 0.8 11° ☆ ☆ ★ ☆ ★ ★
α

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPC201

BPC401

BPG20A
BPG30A
BPU10B
BPS201

BPS401

BPG308
BPT30B

BPC056
BPU200
BPU206
BPS303

BPS403

BN201
BN301

BU820
BP35
ΦI.C S bs be α

1603PPL/R 9.525 3.18 1.2 ≈ 0.7 11° ☆ ☆ ★ ☆ ★ ★

1603PDL/R 9.525 3.18 1.2 ≈ 0.7 11° ☆ ☆ ★ ☆ ★ ★
TPKN
2204PDL/R 12.7 4.76 1.4 ≈ 0.7 11° ☆ ☆ ★ ☆ ★ ★

1603PDL/R 9.525 3.18 1.3 ≈ 0.7 11° ☆ ☆ ★ ☆ ★ ★

TPAN
90° S 2204PDL/R 12.7 4.76 1.4 ≈ 0.7 11° ☆ ☆ ★ ☆ ★ ★
I.
C
be
α

bs 1603PDL/R 9.525 3.18 1.3 ≈ 0.7 11° ☆ ☆ ★ ☆ ★ ★

TPCN
2204PDL/R 12.7 4.76 1.4 ≈ 0.7 11° ☆ ☆ ★ ☆ ★ ★

TECN 1603PEL/R 9.525 3.18 2 0.3~0.4 20° ☆ ☆ ★ ☆ ★ ★

TDKN 2204PDL/R 12.7 4.76 1.4 ≈ 0.7 15° ☆ ☆ ★ ☆ ★ ★
TEKN 2204PDTL/R 12.7 4.76 1.4 ≈ 0.7 20° ☆ ☆ ★ ☆ ★ ★
TFAN 2203PFL/R 12.7 3.18 2.5 ≈ 0.7 25° ☆ ☆ ★ ☆ ★ ★

136

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPU10B
BPG403

BPG308
BPT30B

BPC056
BPU200
BPU206
BPC201

BPS401
BPS201

BPS303
BPC401

BPS403

BN201
BN301

BU820
I.C S bs α

BP35
1103PPN 6.35 3.18 0.7 11° ☆ ☆ ★ ☆ ★ ★
1603PPN 9.525 3.18 1.2 11° ☆ ☆ ★ ☆ ★ ★
TPAN
2204PPN 12.7 4.76 1.3 11° ☆ ☆ ★ ☆ ★ ★

90° 90°
S 1103PPN 6.35 3.18 0.7 11° ☆ ☆ ★ ☆ ★ ★ D
I. 1603PPN 9.525 3.18 1.2 11° ☆ ☆ ★ ☆ ★ ★

Milling
C
bs

TPCN
2204PPN 12.7 4.76 1.3 11° ☆ ☆ ★ ☆ ★ ★
α

bs
1103PPN 6.35 3.18 0.7 11° ☆ ☆ ★ ☆ ★ ★
1603PPN 9.525 3.18 1.2 11° ☆ ☆ ★ ☆ ★ ★
TPKN
2204PPN 12.7 4.76 1.3 11° ☆ ☆ ★ ☆ ★ ★

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPU10B
BPG403

BPT30B

BPU200
BPU206
BPG308
BPS303

BPC056
BPC201
BPS201

BPC401
BPS401

BPS403

BN201
BN301

BU820
I.C S d a bs be BP35

1204EDFL/R 12.7 4.76 5.5 11° 1.4 1 ☆ ☆ ★ ☆ ★ ★

be S 1204EDSL/R 12.7 4.76 5.5 11° 1.4 1 ☆ ☆ ★ ☆ ★ ★
SPKW
bs

75° 1204EDTL/R 12.7 4.76 5.5 11° 1.4 1 ☆ ☆ ★ ☆ ★ ★

αd

I.C
SPCW 1504EDL/R 15.875 4.76 5.5 11° 1.5 1 ☆ ☆ ★ ☆ ★ ★
1504EPL/R 15.875 4.76 5.5 11° 1.5 1 ☆ ☆ ★ ☆ ★ ★

137

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG30A
BPG20A
BPG403
BPS303

BPU10B
BPC056
BPT30B

BPU200
BPU206
BPG308
BPS201
BPC201

BPC401
BPS401

BPS403

BN201
BN301

BU820
I.C S d a bs

BP35
S
bs

SEEW1504AFN 15.875 4.76 5.5 20°2.85 ☆ ☆ ★ ☆ ★ ★

α d

I.C

D
Milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPU10B
BPG403

BPG108
BPG308
BPC402

BPT30B

BPU106
BPU200
BPU206
BPS153
BPS253
BPS303
BPS301

BPS401
BPT403

BPS411
BN201
BN301

BU810
BU820
I.C S d α L

BP20
BP35
BK10
S
L

SEKT1204AESN 12.7 4.76 5.5 20°15.23 ☆ ☆ ★ ☆ ★ ★

αd

I.C

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPU10B
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU056
BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
I.C S bs be BP35

1204ANN 12.7 4.76 2 - ☆ ★ ★ ★ ☆ ★ ★

1504ANN 15.875 4.76 2.5 - ☆ ★ ★ ★ ☆ ★ ★
SNAN
1904ANN 19.05 4.76 3 - ☆ ★ ★ ★ ☆ ★ ★

1204ANN 12.7 4.76 2 - ☆ ★ ★ ★ ☆ ★ ★

be bs S
1504ANN 15.875 4.76 2.5 - ☆ ★ ★ ★ ☆ ★ ★
be

SNCN
1904ANN 19.05 4.76 3 - ☆ ★ ★ ★ ☆ ★ ★
I.C
1904ADSN 19.05 4.76 4 0.5 ☆ ★ ★ ★ ☆ ★ ★
1204ANN 12.7 4.76 2 - ☆ ★ ★ ★ ☆ ★ ★
1504ANN 15.875 4.76 2.5 - ☆ ★ ★ ★ ☆ ★ ★
SNKN
1904ANN 19.05 4.76 3 - ☆ ★ ★ ★ ☆ ★ ★

138

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPU10B
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU056
BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
I.C S bs m

BP35
1204ENN 12.7 4.76 1.4 0.8 ☆ ★ ★ ★ ☆ ★ ★
1504ENN 15.875 4.76 1.4 1.5 ☆ ★ ★ ★ ☆ ★ ★
SNAN
1904ENN 19.05 4.76 2 1.3 ☆ ★ ★ ★ ☆ ★ ★

bs 45° S
15°
1204ENN 12.7 4.76 1.4 0.8 ☆ ★ ★ ★ ☆ ★ ★ D
bs

1504ENN 15.875 4.76 1.4 1.5 ☆ ★ ★ ★ ☆ ★ ★

Milling
SNCN
1904ENN 19.05 4.76 2 1.3 ☆ ★ ★ ★ ☆ ★ ★
m

1204ENN 12.7 4.76 1.4 0.8 ☆ ★ ★ ★ ☆ ★ ★

1504ENN 15.875 4.76 1.4 1.5 ☆ ★ ★ ★ ☆ ★ ★
SNKN
1905ENN 19.05 4.76 2 1.3 ☆ ★ ★ ★ ☆ ★ ★

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
I.C S a r

BP20
BP35
SPGN 090304 9.525 3.18 11° 0.4 ☆ ★ ★ ★ ☆ ★ ★
090308 9.525 3.18 11° 0.8 ☆ ★ ★ ★ ☆ ★ ★
SPGN
S 120308 12.7 3.18 11° 0.8 ☆ ★ ★ ★ ☆ ★ ★
r
SPEN 120408 12.7 4.76 11° 0.8 ☆ ★ ★ ★ ☆ ★ ★
I.C 120404 12.7 4.76 11° 0.4 ☆ ★ ★ ★ ☆ ★ ★
α

SPGN
120408 12.7 4.76 11° 0.8 ☆ ★ ★ ★ ☆ ★ ★
150412 15.875 4.76 11° 1.2 ☆ ★ ★ ★ ☆ ★ ★
SPEN
190416 19.05 4.76 11° 1.6 ☆ ★ ★ ★ ☆ ★ ★

139

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPS2101

BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS303
BPS301

BPT403

BN201
BN301

BU820
I.C S a bs be

BP20
BP35
1204APN 12.7 4.76 11° 2.22 - ☆ ★ ★ ★ ★
SPCN
1904APN 19.05 4.76 11° 4.48 -
SECN 1203AEN 12.7 3.18 20° 2.48 - ☆ ★ ★ ★ ★
SDKN 1504AEN 15.875 4.76 15° 1.9 -

D be
SEEN 1203AFFN 12.7 3.18 20° 1.8 - ☆ ★ ★ ★ ★
- ☆ ★ ★ ★ ★
Milling

1203AFTN 12.7 3.18 20° 1.8

S
bs
be

1203AFTN-1 12.7 3.18 20° 2.46 r1 ☆ ★ ★ ★ ★

I.C 1204AFN 12.7 4.76 20° 1.8 - ☆ ★ ★ ★ ★
α

SEKN
1204AFTN 12.7 4.76 20° 1.8 - ☆ ★ ★ ★ ★
1504AFN 15.875 4.76 20° 1.6 - ☆ ★ ★ ★ ★
1504AFTN 15.875 4.76 20° 1.6 - ☆ ★ ★ ★ ★
SPKN 1504AFTN 15.875 4.76 11° 1.8 1 ☆ ★ ★ ★ ★
SEMN 1204AEN 12.7 4.76 20° 2.1 - ☆ ★ ★ ★ ★

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820

I.C S a R L1
BP20
BP35

SPEX 1203EDL/R 12.7 3.18 11° 500 15 ☆ ★ ★ ★ ☆ ★ ★

S
R

SPKX 1504EDFL/R 15.88 4.76 11° 500 19.37 ☆ ★ ★ ★ ☆ ★ ★

L1

I.C
α

140

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
I.C S α

BP20
BP35
S
bs

I.C SEMN1203AFTN 12.7 3.18 20° ☆ ★ ★ ★ ☆ ★ ★

α

Milling
Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade BPG20A PVD coating grade Cermet Uncoated grade

BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN301

BU820
I.C S a r

BP20
BP35
090304 9.525 3.18 11° 0.4 ☆ ★ ★ ★ ☆ ★ ★

r S 09T304 9.525 3.97 11° 0.4 ☆ ★ ★ ★ ☆ ★ ★

090308 9.525 3.18 11° 0.8 ☆ ★ ★ ★ ☆ ★ ★
SPMR
I.C 120304 12.7 3.18 11° 0.4 ☆ ★ ★ ★ ☆ ★ ★
α

120308 12.7 3.18 11° 0.8 ☆ ★ ★ ★ ☆ ★ ★

120312 12.7 3.18 11° 1.2 ☆ ★ ★ ★ ☆ ★ ★

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820

I.C S a bs be
BP20
BP35

be 1203AZ-YM 12.7 3.18 20° 1.6 0.8 ☆ ★ ★ ★ ☆ ★ ★

S
bs

12T3AZ-YM 12.7 3.98 20° 1.6 0.8 ☆ ★ ★ ★ ☆ ★ ★

be

SEKR
1204AZ-YM 12.7 4.76 20° 1.6 0.8 ☆ ★ ★ ★ ☆ ★ ★
I.C
α

1504AZ-YM 15.875 4.76 20° 1.6 0.8 ☆ ★ ★ ★ ☆ ★ ★

141

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
ΦI.C S d r α

BP20
BP35
120408-D51 12.7 4.76 5.5 0.8 11° ☆ ★ ★ ★ ☆ ★ ★
S
09T308-D51 9.525 3.97 4.4 0.8 11° ☆ ★ ★ ★ ☆ ★ ★
∅d

SPMT
.C
∅I
α
4-

D
r
Milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
L W S d r

BP20
BP35
88 r 150412R-D5115.875 12.7 4.91 5.5 1.2 ☆ ★ ★ ★ ☆ ★ ★
° 2-
15T308R-D51 15 9.525 3.97 4.4 0.8 ☆ ★ ★ ★ ☆ ★ ★
∅d

LPMT
W

L S

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820

I.C S a bs be
BP20
BP35

SPKN1203EDFL/R 12.7 3.18 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★

∅I.C
75 SPKN1203EDEL/R 12.7 3.18 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★
° SPKN
a°

SPKN1504EDFL/R 15.875 4.76 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★

be

bs S SPKN1504EDEL/R 15.875 4.76 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★

142

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BN201
BN301

BU820
I.C S a bs be

BP20
BP35
1203EDL/R 12.7 3.18 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★
SPAN
1504EDL/R 15.875 4.76 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★
1504EDL/R 15.875 4.76 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★
SPCN
∅I.C 1203EDL/R 12.7 3.18 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★
75
°
1504EDL/R 15.875 4.76 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★ D
a°

SPKN
12.7 3.18 11° 1.4 ≈1 ☆ ★ ★ ★ ☆ ★ ★

Milling
1203EDL/R
be

bs S
SECN 1203EEL/R 12.7 3.18 20° 2.5 - ☆ ★ ★ ★ ☆ ★ ★
SFAN 1203EFL/R 12.7 3.18 25° 2.5 - ☆ ★ ★ ★ ☆ ★ ★

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
I.C S a bs be

BP20
BP35
b 1204ZETL/R 12.7 4.76 11° 1.93 0.6 ☆ ★ ★ ★ ☆ ★ ★
65° e S SPKN
bs

1504ZEFL/R 15.875 4.76 11° 2 0.8 ☆ ★ ★ ★ ☆ ★ ★

SPCN 1504ZETL/R 15.875 4.76 11° 2 1 ☆ ★ ★ ★ ☆ ★ ★
I.C
α

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820

I.C S a bs
BP20
BP35

S
bs

SDHW0903AEFN 9.53 3.18 15° 0.75 ☆ ★ ★ ★ ☆ ★ ★

I.C
α

143

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
L ΦI.C S d r α

BP20
BP35
S 05T305-NN 5.26 12.7 3.97 4.4 0.5 25° ☆ ★ ★ ★ ☆ ★ ★
I.C
r

070405-NN 7.46 18 4.76 5.5 0.5 25° ☆ ★ ★ ★ ☆ ★ ★

OFMT
α d

D
Milling

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
ΦI.C S r α

BP20
BP35
S
I.C
r HEEN532 15.875 4.76 0.8 20° ☆ ★ ★ ★ ☆ ★ ★
α

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
L I.C S d r α
BP20
S BP35
I.C
r

OFER070405NN 7.46 18 4.76 2.3 0.5 25° ☆ ★ ★ ★ ☆ ★ ★

α d

Grade recommendation
Dimension（mm）
Inserts shape Type
CVD coating grade PVD coating grade Cermet Uncoated grade
BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820

L I.C S d r α
BP20
BP35

S
I.C r
ODHW0504ZZN 5.26 12.7 4.76 4.4 0.5 15° ☆ ★ ★ ★ ☆ ★ ★
α d

144

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D4 Inserts for face milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Cermet Uncoated grade

BPG20A
BPG30A
BPG403

BPG108
BPG308
BPC201

BPC402

BPT30B

BPU200
BPU206
BPS201

BPS303
BPS301

BPT403

BN201
BN301

BU820
I.C S d α

BP20
BP35
0803MOE-G 8 3.18 3.4 11° ☆ ★ ★ ★ ☆ ★ ★
10T3MOE-G 10 3.97 4.4 11° ☆ ★ ★ ★ ☆ ★ ★
S
I.C 1204MOE-G 12 4.76 4.4 11° ☆ ★ ★ ★ ☆ ★ ★
RPMT
10T3MOE-BJS 10 3.97 4.4 11° ☆ ★ ★ ★ ☆ ★ ★
α d

1204MOE-BJS 12 4.76 4.4 11° ☆ ★ ★ ★ ☆ ★ ★ D

11° ☆ ★ ★ ★ ☆ ★ ★

Milling
0827MO-BJS 8 2.7 3.4

S 0803MOE 8 3.18 3.4 11° ☆ ★ ★ ★ ☆ ★ ★

I.C 1003MOE 10 3.18 4.4 11° ☆ ★ ★ ★ ☆ ★ ★
RPMW
α d

10T3MOE 10 3.97 4.4 11° ☆ ★ ★ ★ ☆ ★ ★

1204MOE 12 4.76 4.4 11° ☆ ★ ★ ★ ☆ ★ ★

145

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D5 Inserts for heavy-cutting milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU810
BU820
ΦI.C W S d C/R

BP20
BP35
BK10
44102 12.7 12.7 6.35 5.4 C0.5 ☆ ★ ★ ★ ★
C S
I. 323-405 12.7 9.525 4.76 4.3 C0.5 ☆ ★ ★ ★ ★
CNE
w

C/R 44-405 12.7 12.7 6.35 5.5 C0.5 ☆ ★ ★ ★ ★

454-4R1 16.3 14.288 6.35 5.5 R1.0 ☆ ★ ★ ★ ★
D Grade recommendation
Milling

Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU810
BU820
L W S d C/R

BP20
BP35
BK10
L S CDE323L05 12.7 9.525 4.76 4.5 C1.0 ☆ ★ ★ ★ ★
CDE323R05 12.7 9.525 4.76 4.5 C1.0 ☆ ★ ★ ★ ★
d
W

C/R

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU810
BU820
L W S d C/R

BP20
BP35
BK10
L S
LNE0904TL-Φ4.1 9.53 9.53 4.76 4.1 C0.5 ☆ ★ ★ ★ ★
W

C/R

LNE434-02 19.05 14.29 6.35 5.4 C1.0 ☆ ★ ★ ★ ★

w S
N18404-JH 15.875 12.7 7.94 5.5 C0.4 ☆ ★ ★ ★ ★
d
L

C/
R

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820

L W S d
BP20
BP35

L S N18-1 15.875 12.7 7.94 5.5 ☆ ★ ★ ★ ★

L19.05x14.3x6.35-R7-Φ5.35 19.05 14.29 6.35 5.35 ☆ ★ ★ ★ ★
d
W

L S SNE33-01 9.525 9.525 4.76 4.4 ☆ ★ ★ ★ ★

SNC44 12.7 12.7 6.35 4.4 ☆ ★ ★ ★ ★
W

SNC55 15.875 15.875 7.94 5.5 ☆ ★ ★ ★ ★

146

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D5 Inserts for heavy-cutting milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820
L W S d C/R

BP20
BP35
LND424-DA 13 12.7 6.35 6 2-R1.45 2-R2 ☆ ★ ★ ★ ★
L S
GLOL20023R4 12.7 12.7 6.35 5.5 4-R0.4 ☆ ★ ★ ★ ★
w

C/ N136 15.875 12.7 7.94 5.5 4-R2 ☆ ★ ★ ★ ★

R

Milling
W S GLOL20022R5 15.875 12.7 6.35 5.4 R5.0 ☆ ★ ★ ★ ★
L

R
C/
SNE1507-4R3 15.88 15.88 7.94 5.5 R3.0 ☆ ★ ★ ★ ★
LNC305-YT 17.46 12.7 7.15 5.5 R5.0 ☆ ★ ★ ★ ★

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820
L W S d R

BP20
BP35
S LNE323-02 15.875 9.525 4.76 4.4 2 ☆ ★ ★ ★ ★
LND624-DA 15.5 12.7 7.35 6 2R2.55 2R2.80 ☆ ★ ★ ★ ★
L

N135 15.88 9.52 7.94 5.5 13 ☆ ★ ★ ★ ★

R
w

147

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D5 Inserts for heavy-cutting milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820
L W S d R

BP20
BP35
SN155R10-P50 15.875 15.875 7.94 5.5 10 ☆ ★ ★ ★ ★
S R
SN55R8-EB50 16.875 16.875 7.94 5.5 8 ☆ ★ ★ ★ ★
W

D S
SN55R6.5 15.875 15.875 7.94 5.5 6.5 ☆ ★ ★ ★ ★
SN55R40 15.875 15.875 7.94 5.5 40 ☆ ★ ★ ★ ★
Milling

R
L

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820
L W S d R

BP20
BP35
GLOL20021R5 15.28 12.7 7.94 5.4 5.0 ☆ ★ ★ ★ ★
S
N182R5-JH 15.875 12.7 7.94 5.5 5.0 ☆ ★ ★ ★ ★
L

LNC306-YT 15.875 12.7 7.15 5.5 4.7 ☆ ★ ★ ★ ★

R
W FNC334-103T05-W 23.5 11.5 6.4 4.4 6.5 ☆ ★ ★ ★ ★
FNC484-103 51 14.3 6.3 5.6 6.3 ☆ ★ ★ ★ ★

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820

L W S d R
BP20
BP35

S SN55RK13-ING 15.875 15.875 7.93 5.5 12.7 ☆ ★ ★ ★ ★

SN55-R15-R00P50 15.875 15.875 7.93 5.5 15 ☆ ★ ★ ★ ★
R
W

148

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D5 Inserts for heavy-cutting milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820
L W S d R

BP20
BP35
S LNE425-R13 15.875 12.7 7.93 5.5 13 ☆ ★ ★ ★ ★

R
D
W

SN55R20-P50 15.875 15.875 7.93 5.5 20 ☆ ★ ★ ★ ★

L
☆ ★ ★ ★ ★

Milling
SNC55R18-EB50 15.875 15.875 7.93 5.5 18

LNHX1906 19 14.3 6.35 5.3 - ☆ ★ ★ ★ ★

S
LNHX2509 25.4 14.3 9.5 5.5 - ☆ ★ ★ ★ ★
w

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820
L W S d

BP20
BP35
NXE324-104 12.7 11.89 6.35 4.5 ☆ ★ ★ ★ ★
S
LNKX1506PN-N-MM 15 13.9 6 4.6 ☆ ★ ★ ★ ★
L

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG30A
BPG403

BPG308
BPC102

BPC402

BPT30B

BPU206
BPS253
BPS303

BPS301
BPS401

BU820

L W S d R1 R2
BP20
BP35

S
d 7°
R1
R2

DIN7168-M 15.875 14.53 6 5.4 8.0 22 ☆ ★ ★ ★ ★

W

149

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D6 Inserts for shallow hole drilling

Material recommended
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG308
BPC201

BPC102

BPU200

BPU206
BPS303
BPS201

BU810

BU820
r

BP20

BP35

BK10
I.C S d

060204-PM 6 2.38 2.6 0.4 ★ ★ ★ ★ ★

S
I.C 07T308-PM 7.94 3.97 2.8 0.8 ★ ★ ★ ★ ★
SPGT 090408-PM 9.8 4.3 4.2 0.8 ★ ★ ★ ★ ★
d

r 110408-PM 11.5 4.76 4.4 0.8 ★ ★ ★ ★ ★

D 140512-PM 14.3 5.2 5.75 1.2 ★ ★ ★ ★ ★
Milling

Material recommended
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG308
BPC201

BPC102

BPU200

BPU206
BPS201

BPS303

BU810

BU820
d r
BP20

BP35

BK10
I.C S

050204-ZV 5.56 2.38 2.5 0.4 ★ ★ ★ ★ ★

s 060204-ZV 6.0 2.38 2.8 0.4 ★ ★ ★ ★ ★

I.C
07T308-ZV 7.94 3.97 2.8 0.8 ★ ★ ★ ★ ★
SPMG
αd

090408-ZV 9.8 4.3 4.1 0.8 ★ ★ ★ ★ ★

r
110408-ZV 11.5 4.76 4.4 0.8 ★ ★ ★ ★ ★
140512-ZV 14.3 5.56 5.5 1.2 ★ ★ ★ ★ ★

Material recommended
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG308
BPC201

BPC102

BPU200

BPU206
BPS201

BPS303

BU810

BU820
BP20

BP35

BK10

I.W L S d

S
I.W

APMT1504T-WT 15.88 12.7 4.76 5.5 ★ ★ ★ ★ ★

d

150

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D6 Inserts for shallow hole drilling

Material recommended
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG308
BPC201

BPC102

BPU200

BPU206
BPS201

BPS303

BU810

BU820
d

BP20

BP35

BK10
I.C S r

60° 1403-RG 8.45 3.55 2.88 0.80 ★ ★ ★ ★ ★

I.
C 1704-RG 10.30 4.02 3.90 0.80 ★ ★ ★ ★ ★
TPMX
°

2405-RG 14.21 5.50 4.40 1.20 ★ ★ ★ ★ ★

.5

3-11°
42

r S

Material recommended
D

Milling
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG308
BPC201

BPC102

BPU200

BPU206
BPS201

BPS303

BU810

BU820
BP20

BP35

BK10
I.C S d r

030204-ZV 5.56 2.38 2.5 0.4 ★ ★ ★ ★ ★

S
040204-ZV 6.35 2.38 2.8 0.4 ★ ★ ★ ★ ★
I.C
WCGX 050308-ZV 7.94 3.18 3.4 0.8 ★ ★ ★ ★ ★
α d

r
06T308-ZV 9.525 3.97 4.4 0.8 ★ ★ ★ ★ ★
080408-ZV 12.7 4.76 5.5 0.8 ★ ★ ★ ★ ★

D7 Inserts for profile milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade
BPG20A
BPG30A

BPG308
BPC201

BPC102

BPT30B

BPU200
BPU206
BPS201

BPS303

BPS301

ΦI.C S Φd L R a°

08T2R10 6.75 2.78 2.8 8.4 10 14 ☆ ★ ★ ★ ★ ★ ★

1103R12.5 8.5 3.18 2.8 10.6 12.5 14 ☆ ★ ★ ★ ★ ★ ★
ZDET
S 13T3R16 10.5 3.97 4.4 13.2 16 14 ☆ ★ ★ ★ ★ ★ ★
I.C R
d

2204R20 12.7 4.76 5.5 16.1 20 11 ☆ ★ ★ ★ ★ ★ ★

α

L 2204R25 12.7 4.76 5.5 16.9 25 11 ☆ ★ ★ ★ ★ ★ ★

ZPNT
2204R31 12.7 4.76 5.5 17.6 31.5 11 ☆ ★ ★ ★ ★ ★ ★

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade
BPG20A
BPG30A
BPU10B
BPG403

BPG108
BPG308
BPC201

BPC102

BPC402

BPT30B

BPU106
BPU200
BPU206
BPS303

BPS301
BPS201

BPT403

ΦI.C S Φd L r a°

S 060304 6.35 3.18 2.8 6.35 0.4 11° ★ ★ ★ ★ ★ ★ ★

I.C SPMT
120408 12.7 4.76 5.5 12.7 0.8 11° ★ ★ ★ ★ ★ ★ ★
α d

SDMT 090308 9.525 3.18 4.4 9.525 0.8 15° ★ ★ ★ ★ ★ ★ ★

r

151

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D8 Inserts for square shoulder milling

Material recommended
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoating grade

BPG308
BPC102
BPU200
BPU206
BPS153
BPS253
BPS303

BU810
BU820
r

BP20
BP35
BK10
I.W L S d

S 1135PDER-H2 6.2 11.21 3.5 2.8 0.8 ★ ☆ ★ ★ ☆

APMT
★ ☆ ★ ★ ☆
I.W

1604PDER-H2 9.28 17.15 4.76 4.4 0.8

d

r L APMT 160432PDER-H8 9.33 16.31 4.76 4.4 3.2 ★ ☆ ★ ★ ☆

S 1135PDER-M2 6.2 11.21 3.5 2.8 0.8 ☆ ☆ ★ ★ ☆
I.W

D APMT
d

r L 1604PDER-M2 9.28 17.15 4.76 4.4 0.8 ☆ ☆ ★ ★ ☆

☆ ☆ ★ ★ ☆
Milling

1135PDER-EM 6.24 11.2 3.5 2.8 0.8

S 1604PDER-EM 9.41 17.24 5.28 4.4 - ☆ ☆ ★ ★ ☆
I.W

APMT
d

170508R-EM 10.8 18.54 5.56 4.4 0.8 ☆ ☆ ★ ★ ☆

L
r

170516R-EM 10.8 18.54 5.56 4.4 1.6 ☆ ☆ ★ ★ ☆

1135PDFR-G2 6.17 11.31 3.5 2.8 0.8 ☆ ★ ★ ☆
S
113504PDFR-G2 6.17 11.31 3.5 2.8 0.4 ☆ ★ ★ ☆
I.W

APKT
d

r L 1604PDFR-G2 9.525 17.12 4.76 4.4 0.8 ☆ ★ ★ ☆

Material recommended
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG308
BPC102
BPU106
BPU200
BPU206
BPS153
BPS253

BU810
BU820
r
BP20
BP35
BK10

I.W L S d

S
r I.W

APKW160404 9.525 16.8 4.76 4.4 0.4 ☆ ★ ★ ☆ ☆

d

152

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D8 Inserts for square shoulder milling

Material recommended
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoating grade

BPG308
BPC102
BPU200
BPU206
BPS153
BPS253
BPS303

BU810
BU820
I.W L S Φd r

BP20
BP35
BK10
1003PDSR-30 6.66 11.09 3.5 2.8 0.4 ★ ☆ ★ ★ ☆
r
2- S APKT
1604PDSR-30 9.53 17.1 5.2 4.4 0.6 ★ ☆ ★ ★ ☆
∅d
I.W

2-
r
S
D
★ ☆ ★ ★ ☆

Milling
APLX 1003PDTR-LMNA 6.73 11.21 3.5 2.8 0.4
I.W

∅d

APKT 1604PDTR-LMNA 9.525 17.03 4.76 4.4 1 ★ ☆ ★ ★ ☆

L

r
2- S
BR390-11T308-PM 6.9 11.72 3.58 2.8 0.8 ★ ☆ ★ ★ ☆
I.W

∅d

L BR390-170408-PM 9.6 17.82 4.76 4.12 0.8 ★ ☆ ★ ★ ☆

r S
2-
6.9 11.72 3.58 2.8 0.8 ★ ☆ ★ ★ ☆
I.W

BR390-11T308-PL
∅d

r
2- S
120408R-FA 7.66 14.04 4.76 3.4 0.8 ★ ☆ ★ ★ ☆
I.W

∅d

AOMT
124340R-FA 7.6 12.8 4.36 3.4 4 ★ ☆ ★ ★ ☆
L

153

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D9 Inserts for chamfer milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG308
BPC102
BPU106
BPU200
BPU206
BPS153
BPS253
BPS303

BU810
BU820
r

BP20
BP35
BK10
I.C S d

S
I.C
SPMT120408 12.7 4.76 5.5 0.8 ★ ★ ★ ★
αd
r

D
Milling

D10 Tnserts for T-Slot milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG308
BPC102
BPU106
BPU200
BPU206
BPS153
BPS253
BPS303

BU810
BU820
ΦI.C r BP20
BP35
BK10
S d

S 060304-DM 6.35 3.18 2.8 0.4 ★ ★ ★ ★

I.C
080305-DM 8.3 3.18 3.4 0.5
MPHT
d

120408-DM 12.7 4.76 5.5 0.8

α
r

154

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D11 Inserts for high feed milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade

BPG308
BPC102
BPU106
BPU200
BPU206
BPS153
BPS253
BPS303

BU810
BU820
r

BP20
BP35
BK10
I.C S d a°

S 09T312-DM 9.525 3.97 4 1.2 15° ★ ★ ★ ★

I.C
120412-DM 12.7 4.76 4.4 2 15° ★ ★ ★ ★
SDMT
α d
r

铣削
Milling
Grade recommendation
Dimension（mm）
The basic shape of inserts Type
CVD coating grade PVD coating grade Uncoated grade
BPG308
BPC102
BPU106
BPU200
BPU206
BPS153
BPS253
BPS303

BU810
BU820
r
BP20
BP35
BK10
I.C S d a°

S 050315ZSR 7.94 3.5 4 1.5 11° ★ ★ ★ ★

I.C 060415ZSR 9.525 4.2 4.4 1.5 11° ★ ★ ★ ★
WPGT
d

r 080615ZSR 12.85 6.35 5.5 1.5 11° ★ ★ ★ ★

α

090725ZSR 15 7 5.5 2.5 11° ★ ★ ★ ★

155

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D12 Inserts for aluminum prcessing milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoating grade

BPU109

BU810

BU820
I.W L S d r

BK10
S 11T304-LH 6.5 12.24 3.6 2.8 0.4 ☆ ★
I.W

APKT 11T308-LH 6.5 12.24 3.6 2.8 0.8 ☆ ★

d

r L

160402PDFR-LH 9.8 16.88 4.76 4.4 0.2 ☆ ★

D S
160404PDFR-LH 9.8 16.88 4.76 4.4 0.4 ☆ ★
☆ ★
Milling
铣削

160408PDFR-LH 9.8 16.88 4.76 4.4 0.8

I.W

APKT
r L 160416PDFR-LH 9.8 16.88 4.76 4.4 1.6 ☆ ★
160432PDFR-LH 9.8 16.88 4.76 4.4 3.2 ☆ ★

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BPU109

BU810
a

BK10
I.C S d L

S SEKT 1204AFFN-LH2 12.7 4.76 5.5 20° 16 ☆ ★

L

I.C
α d

SDHT 1204AEFN-LH2 12.7 4.76 5.5 15° 15.76 ☆ ★

13T3AEFN-LH 13.4 3.97 4.4 20° ☆ ★

S
13T3AZFN-LH 13.4 3.97 4.4 20° ☆ ★
L

SDKT
☆
I.C
0903AEFN-LH1 9.525 3.18 3.4 15°
αd

0903AEFN-LH 9.525 3.18 3.4 15° ☆ ★

S 070404-LH 17.94 4.76 0.4 25° ☆ ★
I.C r 070408-LH 17.94 4.76 0.8 25° ☆ ★
OFGR
α d

L
0602MOF-LH 6 2.38 2.8 7° - ☆ ★
S
I.C
0803MOF-LH 8 3.18 3.4 7° - ☆ ★
RCGT
-
α d

1003MO-LH 10 3.18 4.4 7° ☆ ★

10T3MO-LH 10 3.97 4.4 7° - ☆ ★
1204MO-LH 12 4.76 4.4 7° - ☆ ★

156

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D12 Inserts for aluminum prcessing milling

Grade recommendation
Dimension（mm）
The basic shape of inserts Type
PVD coating grade Uncoated grade

BPU109

BU810

BU820
r

BK10
I.W L S d

XDGT2206PDFR-LH 13.67 30 6.35 5.67 0.8 ☆ ★

S
2-r
I.W

∅d

2-r
S XEKT19M530FR-LH 11.38 22.05 5 4.4 3 ☆ ★ D

Milling
I.W

∅d

XPGT13T3PDFR-LH 7.78 14.7 3.97 3.4 0.4 ☆ ★

S
2-r
I.W

∅d

157

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D13 Others

Dimension（mm）
Type
Insert shape
I.C S a d
S
I.C P22215-00 8 2.38 14° 3.4
α d

P22215-14 12 4.76 11° 5.5

D
Milling

Dimension（mm）
Type
Insert shape
L S a° r

P2801-0 9.52 3.18 14 0.8

P2808-1 12.7 4.76 11 0.8
P2809-1 12.7 4.76 11 0.8
P28415-00 6.35 3.18 11 0.4
r
α°

P28415-0 9.52 3.18 14 0.8

P28495-1 12.7 4.76 11 0.8

L S
P2800-0 9.52 3.18 11 0.8

P2800-2 15.88 4.76 11 1.2

P2816-1 12.7 4.76 11 C0.7

Dimension（mm）
Type
Insert shape
L S a° b

P2894-1 12.7 4.76 20 2

P2894-2 15.88 4.76 20 2.1

α°
b

P2803-1R 12.7 4.76 11 1.4

P2803-1L 12.7 4.76 11 1.4

L S

P28451-1 1.27 4.76 11 1.4

158

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D13 Others

Dimension（mm）
Type
Insert shape
I.C L S a° ε° r
ε

P29221-04 6.35 6.45 2.38 7 80 0.4

°

I.C P29221-14 9.525 9.67 3.97 7 80 0.4

P29223-02 6.35 6.45 2.38 7 80 0.2
r
L S P29223-12 9.525 9.525 3.97 7 80 0.2

Milling
Dimension（mm）
Type
Insert shape
L S a° ε°

P28467-1 6.35 2.38 14 90

P28467-2 7.8 3.18 14 90
P28467-3 9.52 3.97 11 96
P28467-4 11 3.97 11 96
P28467-5 12.7 4.76 11 96
ε

P28467-6 15 4.76 11 96
α°
°

P28467-7 17.6 5.56 11 96

P28475-1 6.35 2.38 14 90
L S P28475-2 7.8 3.18 14 90
P28475-3 9.52 3.97 11 96
P28475-4 11 3.97 11 96
P28475-5 12.7 4.76 11 96
P28475-6 15 4.76 11 96
P28475-7 17.6 5.56 11 96

Dimension（mm）
Type
Insert shape
L W S a° C/R b

P2700-0 8.3 8.3 3.18 11 R0.5

P2700-3R 15 9.52 3.18 14 R0.8
P2700-3L 15 9.52 3.18 14 R0.8
P2703-3R 15 9.52 3.18 14 1.4
P2703-4R 20 12.7 4.76 11 1.5
α°
R
C/
b
W

P2706-3R 15.88 12.7 4.76 11 C1.1

L S
P2706-4R 20 12.7 4.76 11 C0.8
P2706-4L 20 12.7 4.76 11 C0.8
P2707-3R 15.88 12.7 4.76 11 C1.1
P2707-4R 20 12.7 4.76 11 C0.8
P2707-4L 20 12.7 4.76 11 C0.8

159

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D13 Others

Dimension（mm）
Type
Insert shape
I.C S a° b
α°

P2603-2 9.52 4.76 11 1.2

b

I.C P2603-3 12.7 4.76 11 1.2

D
Milling

Clamping system inserts

Dimension（mm）
Type
Insert shape
I.C S r

304050 4.0±0.05 2.5±0.13 0.5

S 307050 7.0±0.05 3.0±0.13 0.5
310050 10.0±0.05 3.5±0.13 0.5
I.C 313050 13.0±0.08 4.5±0.13 0.5
r
316050 16.0±0.10 5.5±0.13 0.5
316100 16.0±0.10 5.5±0.13 1
307058 7.0±0.05 3.0±0.13 0.5

S 310058 10.0±0.05 3.5±0.13 0.5

8° 313058 13.0±0.05 4.5±0.13 0.5

I.C 313108 13.0±0.08 4.5±0.13 1
r
316058 16.0±0.10 5.5±0.13 0.5
316108 16.0±0.10 5.5±0.13 1
3070511 7.0±0.05 3.0±0.13 0.5

S 3100511 10.0±0.05 3.5±0.13 0.5

11° 3130511 13.0±0.05 4.5±0.13 0.5

I.C 3131011 13.0±0.08 4.5±0.13 1
r
3160511 16.0±0.10 5.5±0.13 0.5
3161011 16.0±0.10 5.5±0.13 1

160

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D14 Clamping system inserts

Type Dimension（mm）
Insert shape
I.C±0.025 S±0.025 m±0.013 a b f

3XH06Y 3XH06Z 6 2.8 1.651 0.8 0.2 0.1

S
11° 3XH08Y 3XH08Z 8 3.5 2.23 1 0.3 0.1

I.C 3XH10Y 3XH10Z 10 3.5 2.756 1.2 0.5 0.2

b

a 3XH13Y 3XH13Z 13 4.5 3.669 1.4 0.7 0.4

f m

3XH16Y 3XH16Z 16 5.5 4.528 1.6 1 0.6

Milling
Dimension（mm）
Type
Insert shape
I.C±0.025 S±0.025 m±0.013 a f
S 3XH07 7 3 1.696 1 0.2
11°
3XH10 10 3.5 2.621 1.2 0.2
I.C
a

3XH13 13 4.5 3.548 1.4 0.4

a
f

3XH16 16 5.5 4.469 1.6 0.6

m

Type Dimension（mm）
Insert shape
I.C±0.025 S±0.025 m±0.013 a b f

S 4XH13Y 4XH13Z 13 3.5 0.926 1.4 1 0.2

11°
4XH16Y 4XH16Z 16 4.5 1.263 1.4 1 0.4
I.C
m

4XH19Y 4XH19Z 19 5.5 1.513 1.6 1.2 0.4

b

a
f

4XH25Y 4XH25Z 25 7 2.186 1.6 1.2 0.6

Dimension（mm）
Type
Insert shape
I.C±0.025 S±0.025 m±0.013 a b

S 4X13 13 4.5 0.834 1.4 1

m
4X16 16 4.5 1.171 1.4 1
I.C
a

4X19 19 5.5 1.408 1.6 1.2

a
4X25 25 7 2.082 1.6 1.2
b

161

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D14 Clamping system inserts

Dimension（mm）
Type
Insert shape
I.C S r

410050 10±0.05 3.5±0.13 0.5

413050 13±0.08 4.5±0.13 0.5
413100 13±0.08 4.5±0.13 1
S
413200 13±0.10 4.5±0.13 2
416050 16±0.10 4.5±0.13 0.5
I.C r 416100 16±0.10 4.5±0.13 1
D 416200 16±0.10 4.5±0.13 2
Milling

419100 19±0.10 5.5±0.13 1

419200 19±0.10 5.5±0.13 2
410058 10±0.05 3±0.13 0.5
413058 13±0.08 3.5±0.13 0.5
413108 13±0.08 3.5±0.13 1
S
416058 16±0.10 4.5±0.13 0.5
8° 416108 16±0.10 4.5±0.13 1
I.C r 416158 16±0.10 4.5±0.13 1.5
419108 19±0.10 5.5±0.13 1
419208 19±0.10 5.5±0.13 2
420108 20±0.13 7.0±0.13 1
4100511 10±0.05 3±0.13 0.5
4130511 13±0.08 3.5±0.13 0.5
4130511T 13±0.08 4.5±0.13 0.5
4131011 13±0.08 3.5±0.13 1

S 4131011T 13±0.08 4.5±0.13 1

11° 4160511 16±0.10 4.5±0.13 0.5

4161011 16±0.10 4.5±0.13 1
I.C r
4161511 16±0.10 4.5±0.13 1.5
4191011 19±0.10 5.5±0.13 1
4192011 19±0.10 5.5±0.13 2
4251011 25±0.13 7.0±0.13 1
4252011 25±0.13 7.0±0.13 2

162

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D15 铣削技术资料 Milling Technical information

a 铣削加工常见问题及解决方案 Common problems and solutions for milling

刀具材
对策与检查要点 料选择 切削条件 刀具形状 机床装夹
Main points of solution and inspection Selection of Cutting condition Tool shape Machine tool clamping
tool material

Change the diameter and width of milling tools

Examine the geometry shape of Minor cutting edge

Material with perfect toughness

Clamping system of workpiece

Check the run-out of end face

Improve the rigidity of tool

Strength of cutting edge

Number of teeth
Cutting depth

Overhang of tool
Approach angle
Cutting speed
higher hardness Material

Cutting liquid

Rake angle
Feed rate

Increase the chip pocket

Power, gap
Failure descniption

√
D

Milling
Improper cutting condition
Severe abrasion
of clearance face Improper geometry shape of √
cutting edge

Improper cutting condition

√
Severe abrasion
of rake face Improper geometry shape of
cutting edge
√

Improper cutting condition

Fracture of tool nose

Fracture of
cutting edge Improper geometry shape of
cutting edge
√ √ √ √ √ √ √

Improper cutting condition √

Thermal
Improper geometry shape of
cracking cutting edge

Improper cutting condition √

Build-up edge
Improper geometry shape of
cutting edge
Wiper

Abrasion of tool produces great √ √ √

Coarse surface vibration of milling tool

Improper cutting condition

√
Causing burr
Improper geometry shape of
cutting edge
√
Machining precision

Improper cutting condition

Side collapse
Improper geometry shape of
cutting edge
√ √

Improper geometry shape of

Worse planeness cutting edge
√ √ √ √ √
and parallelism

Great vibration Cutting condition Improper √ √ √ √ √

technology

√ √
Others

Improper cutting condition

Chippings are
twisting and
jamming
Improper geometry shape of
cutting edge
√

163

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D15 Milling Technical information

b Questions and solutions

The problem of representation Phenomenon Reason Solutions

reduction of surface roughness and The cutting speed is too high Lower cutting speed
Blade wear size for finishing The service life of the cutter end The use of abrasion resistance and better material

Burrs The amount of feed is too large and

A boundary wear

D Cutting resistance the cutting speed is too high Improve the edge sharpness
Lower cutting speed
The use of thermal shock resistance of materials
Milling

Cutting speed is too high

Crater wear Chip control deterioration
Finishing the surface deterioration(Terry) Improve the edge sharpness
Lower cutting speed
The use of thermal shock resistance of materials

Workpiece size change Cutting load is too high The use of high hardness material
Plastic deformation
Blade damage Cutter material mismatch Reduce the amount of feed and cutting depth

The cutting speed is too high

The rapid deterioration of processing Reduce the preset tool life
Wear damage surface,Workpiece size tolerance The use of abrasion resistance and better material

Cutting resistance
Surface roughness Surface deterioration The amount of feed is too large Reduce the amount of feed and cutting depth
Cutting vibration knife The use of rigid and better tools
Blade low toughness. The use of higher material toughness

The cutting speed is too low

Surface deterioration Increasing the cutting speed
Sticking to the knife and built-up
Cutting resistance Enhance the sharpness (anterior horn, chamfer )
edge cause chipping

Accidental damage The amount of feed and depth of

Mechanical abrasion The use of higher material toughness
Tool life instability cut is too large Increase chamfer
Cutting vibration knife Increas the radius of the cutter tip
The use of rigid and better tools

By the thermal cycle and damage The amount of feed is too large and
Thermal cracking damage
Occurring in intermittent cutting and milling the cutting speed is too high Reduce the amount of feed
Reduce the cutting speed
The use of dry cutting

Chipping The use of high hardness material ( TiC ceramics and CBN )
Appearing for high hardness material machining Blade low toughness.
The use of rigid and better tools
Appearing in vibration knife cutting Tool less rigid
Change the blade tip.

164

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D15 Milling Technical information

c Difference and selection between down milling and up milling

Vf Vf

X
Y D

Milling
X Y
Enlarge Enlarge

Up milling Down milling

Doun milling (also called down milling): the feed direction of workpiece is the same as the milling rotation at the connecting position.
Up milling (also called up milling): the feed direction of workpiece is opposite to the milling rotation at the connecting position.

In down milling, the major force of cutting edge is compressive stress; in up milling, cutting edge bears the tensile stress. The compressive strength of cemented carbide
material is larger than its tensile strength. In down milling, chip becomes thin from thick gradually , cutting edge and workpiece press each other. The friction between edge
and workpiece is small, thus can reduce the abrasion of edge , the hardening of workpiece surface and the surface roughness (Ra). In up milling, chip becomes thick from
thin gradually. When insert cutting into the workpiece, it generates strong friction and more heat than down milling, and make workpiece surface harden.

In up milling, because horizontal direction of cutting force that milling cutter conducting on workpiece is opposite to the feed direction of workpiece, therefore the lead
screw of work table joints closely with one side of screw nut. In down milling,the direction of cutting force is same as the feed direction. When edge’s radial force on
workpiece is big enough to some extend , the work table will bounce left and right, thus make the gap fall behind. The gap will return to front side along with the continuing
rotation of lead screw. At this moment the work table stops motion, however it will bounce left and right again when the radial cutting force is big enough to some extend
again. The periodical bounce of work table will cause poor surface quality of workpiece and tool breakage.

When use end mills for down milling, every time the edges begin the cutting at workpiece surface, therefore end mills are not suitable for machining the workpiece with
hardened surface.
Up milling is recommended for milling the thin-wall components or square milling with the demand of high precision.

165

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D15 Milling Technical information

d Pitch selection
Pitch is the distance between one point on one cutting edge and the same point on the next edge. Milling cutters are mainly classified into coarse, close and
extra close pitches,

Stability of operation

L M H
(Low) (Medium) (High)

疏 齿 密 齿 超密齿
Coarse pitch Close pitch Extra close pitch

D
Milling

Differential pitch

When the milling width is equal to diameter of cutter, the When the milling width is less than diameter of cutter,
machining system is stable and main power of machine General milling function and multiple mixed productions cutting by maximum edges can achieve high productive
is sufficient,selecting coarse pitch can achieve high efficiency.
productive efficiency.

Selection of approach angle

Approach angle Feed rate per tooth Real maximum cutting depth

90° fz hex=fz×sinkr

75° fz hex=0.96×fz

60° fz hex=0.86×fz

45° fz hex=0.707×fz
The approach angle is composed by insert and tool body, Chip
thickness, cutting forces and tool-life are affected especially by 2
iC ×(iC-2ap)
2

the approach thickness and spreads the cutting area between Round insert
fz hex= ×fz
iC
cutting edge and workpiece for a given feed rate.
A smaller approach angle also guarantee that it is stable
entrying into or exiting workpiece,to protect the cutting edge
and extend tool [Link] this will increase higher axial
cutting forces on the workpiece, thus is not suitable for
machining thin workpiece such as thin plate.

166

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D15 Milling Technical information

e General formula

Vc : cutting speed(m/min) Vf : feed rate of worktable ( feed speed)(mm/min) Q : metal removal rate(cm3/min)

Dc : nominal diameter of milling tool(mm) fz : feed rate per tooth(mm/z) f n : feed rate per revolution (mm/rev)

n : spindle speed(rev/min) π : circumference ratio≈3.14 L : Real cutting distance(mm)

Zn : number of teeth Tc : machining time(min)

● Cutting speed D

Milling
Vc =
π×D c ×n
（m/min）
1000

●Spindle speed
n = 1000 × Vc（rev/min）
π × Dc

● Feed rate of worktable ( feed speed)

Vf = fz× n×zn

● Feed rate per tooth

Vf
fz = （mm/z ）
n×Z n feed direction

● Feed rate per revolution

Tool minor cutting
fn = Vf ( mm/rev) edge angele Shape of tooth
n
Feed rate per tooth

● Machining time
L
Tc = （min）
Vf

● Metal removal rate

ap ×ae ×Vf
Q= (cm3/min)
1000

167

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D15 Milling Technical information

f Function of each part in face milling

Axial rake angle

Approach angle
Main angles of face mills Rake angle
Diameter of cutter

Inclined angle of cutting edge

Radial rake angle
Main angles of face mills
D Designation Function Effect
Milling

Axial rake angle rf Determining the chip direction negative angle, excellent capability of chip removal

Determining whether the cutting

Radial rake angle rp is light and fast or not Positive angle, good cutting performance

Approach angle Kr Determining the chip direction thickness Kr↑，chip thickness↑；Kr↓，chip thickness↓

Poor cutting performance,

Determining whether the cutting high strength of high strength （－）←0→（+） Good cutting performance,
Rake angle R is light and fast or not of cutting edge cutting edge

Poor cutting performance,

（－）←0→（+） Good cutting performance,
Determining the chip direction high strength of high strength low strength of cutting edge
Inclined angle of cutting edge of cutting edge

Characteristics of different rake angles combined

- Double positivec Double negative One positive, one negative

Negative rake angle rf(+) rf(-) rf(+)

o
0

0° rake angle

+
rp(+) rp(-) rp(-)
Positive rake angle

Axial rake angle rf ﹢ － ﹢

Radial rake angle rp ﹢ － －

P √ √
M √ √

Applicable material machined K √ √

N √
S √ √

168

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 D Milling

D15 Milling Technical information

g Cutting performances of different approach angles

Approach angle Schematic diagram Instruction

45°
Axial force is the largest. It will bend when machining thin-wall
workpiece, and reduces the precision of workpiece. It is benefit to
avoid fringe breakage of workpiece when machining cast iron

75° The main purpose is to resolve the radial cutting force, it is often
used for general face milling.
D

铣削
Milling
90° The axial force is zero in theory, suitable for milling thin plate
workpiece.

Wiper insert

It has axial and radial run out because of

tools and inserts exist manufacturing
fz
tolerance. The axial runout lead to poor
fn
surface roughness.
Rz

Solution

Assembling wiper inserts

usage
The wiper insert must protrude below the other inserts by
，
0.03-0.10 mm at axial direction, only that the wiping
function can take into effect. Generally speaking, a cutter
， can just assemble only one wiper insert. If the diameter of
cutter is much bigger or cutter's feed rate per revolution is
bigger than the length of wiper edge, 2 to 3 wiper inserts
Wiper insert Common insert can be assembled.

Selection of cutting width diameter in face milling

Dc ：Tool cutting drameter

ae ：Cutting width

Generally speaking, the relation between

cutting width and diameter is Dc=(1.2—1.5)
ae. In the machining practice, it need to
avoid coincidence of tool center and
workpiece center as much as possible.

(1.2 - 1.5)
169

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 E Shim

E1 C*A 171 D

铣削
Milling
E2 C*B 171

E3 D*A 172

E4 D*B 172

E5 S*A 172

E6 S*B 173

E7 SE* 173

E8 T*A 173

E9 T*B 174

E10 V*B 174

E11 W*A 174

E12 W*B 175

E13 R*A 175

E14 R*B 175

E15 KT* 176

E16 STM*(L*) 176

170 [Link]
 E Shim

E1 C*A

产品型号Type D S d r d1 d2 e
Shim shape applicative inserts

e*45° C12A 11.7 3.18 6.1 0.8 7.3 8.5 0.5 CNMM/G12
∅D ∅d
C16A 14.88 4.76 7.1 1.2 8.5 10 0.5 CNMM/G16
90°

60°
∅d1
∅d2

C19A 18.05 6.35 8.7 1.6 10.3 11.5 0.5 CNMM/G19

r
C16BP 15.6 4.76 7.9 1.6 9.58 11.3 0.5 CNMM/G16
S
C19BP 18.8 4.76 10 1.6 12 12.1 0.5 CNMM/G19

E2 C*B

Shim shape
产品型号Type D S r d1 d2 S1 e
applicative inserts E

Shim
C12B 11.7 3.18 0.8 6.6 8 1.5 0.5 CNMM/G12
C16B 14.88 4.76 1.2 7.6 9 2 0.5 CNMM/G16
C19B 18.05 4.76 1.6 8.6 10 2 0.5 CNMM/G19
MC0903 9.3 3.18 0.8 5.8 6.5 1.87 0.2 CNMM/G09
MC1204 12.5 4.76 1.2 7.4 8.1 2.77 0.2 CNMM/G12
MC1604 15.5 4.76 2 9.8 10.8 2.2 0.3 CNMM/G16
MC1904 18.65 4.76 1.25 8 12.25 2.5 0.5 CNMM/G19
ICSN-332 9.14 4.76 0.8 5.94 6.63 3.43 0.5 CNMM/G09**08
ICSN-432 12.32 4.76 0.8 7.52 8.2 2.59 0.5
CNMM/G12**08
SM-303 12.32 4.76 0.79 6.76 9.14 2.49 0.5
S
S1
80

∅D ICSN-433 12.32 4.76 1.27 7.52 8.2 2.59 0.5

°

CNMM/G12**12
ICSN-443 12.32 5.3 1.27 7.52 8.2 3.05 0.5
∅d1

∅d2

ICSN-533 15.49 4.76 1.27 9.86 10.97 2.59 0.5 CNMM/G16**12

e*45°
r

SM-304 18.67 4.76 1.27 8.48 11.71 2.49 0.5

CNMM/G19**12
ICSN-633 18.67 4.76 1.27 11.43 12.29 2.59 0.5
C0903B 9.13 9.13 0.8 5.85 6.7 1.75 0.5 CNMM/G09
SC1203 12.2 3.18 0.8 6.95 8.05 1.75 0.2
SC1204 12.2 4.76 0.8 7.4 7.8 2.25 0.5
C1203B 12.3 3.18 1.27 7.35 8.3 1.75 0.5
C1203B 12.3 12.3 1.27 7.35 8.3 1.75 0.5 CNMM/G12
SMC-432 12.4 4.8 0.8 7.35 8.1 2.3 0.5
MSC-432 12.4 4.8 1.2 7.25 8 2.6 0.5
C1204 12.5 4.76 1.2 7.4 8.25 3.25 0.8
M-C16B 14.88 4.76 1.2 7.8 9 2.8 0.5
SC1604 15.2 4.76 1.2 7.95 9.05 2.05 0.2 CNMM/G16
C1604B 15.48 4.76 1.27 9.85 10.9 2.65 0.5
SCN-64 18.7 4.76 1.6 9.4 10.8 2.4 0.5

171

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 E Shim

E3 D*A

产品型号Type D S d r d1 d2 e
Shim shape applicative inserts

D15TA 11.7 3.18 6.1 1.2 7.3 8.5 0.2

S
∅D

DNMM/G15
55°

∅d D15A 11.7 4.76 6.1 1.2 7.3 8.5 0.2

90°

60°
∅ d1
∅d2

r D19A 14.88 4.76 7.1 1.2 8.5 10 0.2 DNMM/G19

e*45°
TD1503 11.65 3.18 6.8 0.8 8.6 0.5 DNMM/G15

E E4 D*B
Shim

产品型号Type D S r d1 d2 S1 e
Shim shape applicative inserts

D15TB 11.7 3.18 1.2 6.6 8 1.5 0.2

DNMM/G15
D15B 11.7 4.76 1.2 6.6 8 1.5 0.2
D19B 14.88 4.76 1.2 7.6 9 2 0.2 DNMM/G19
MD1504 12.5 4.76 0.8 7.4 8.1 2.77 0.2
DNMM/G15
MD1506 12.5 6.35 0.8 7.4 8.1 4.28 0.2
IDSN-322 9.14 3.18 0.8 5.94 6.63 1.85 0.5 DNMM/G11**12
S IDSN-433 12.32 4.76 1.27 7.52 8.2 2.59 0.5 DNMM/G15**12
∅D S1
55°

IDSN-533 15.49 4.76 1.27 9.86 10.97 2.59 0.5 DNMM/G19**12

∅d2
∅d1

D1103B 9.13 3.18 0.8 5.85 6.7 1.75 0.5

r
e*45° MD11 9.4 3.3 1.2 5.8 6.6 2 0.2
D1504B 12.32 4.76 1.27 7.35 8.3 2.65 0.5
SMD-432 12.4 6.46 0.8 7.45 8.16 4.4 0.5
SD1503 12.2 3.18 0.8 6.95 8.05 1.75 0.5
SD1506 12.2 6.35 0.8 7.25 8.05 4.05 0.5 DNMM/G15
MSD-432 12.5 4.8 0.8 7.3 8 2.6 0.5
D1504 12.5 4.76 1 7.4 8.25 3.25 0.8
MD15 12.5 4.76 1.2 7.4 8.3 3 0.2

E5 S*A

D S d r d1 d2 e

S09A 8.53 3.18 4.6 0.4 5.6 6.6 0.2 SNMM/G09

S12A 11.7 3.18 6.1 0.8 7.3 8.5 0.2 SNMM/G12
S15A 14.88 4.76 7.1 1.2 8.5 10 0.2 SNMM/G15
e*45°
∅D ∅d S19A 18.05 6.35 8.7 1.6 10.3 11.5 0.2 SNMM/G19
90°

60°
∅d1
∅d2

S22A 21.23 6.35 8.7 1.6 10.3 11.5 0.2 SNMM/G22

S S25A 24.4 6.35 10.1 2.4 12 13 0.2 SNMM/G25

r

S09BP 8.5 3.18 4.9 0.8 6.8 6.5 0.3 SNMM/G09

SC42 12.5 3.18 6.9 1.2 8.5 8 0.5

172

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 E Shim

E6 S*B

产品型号Type D S r d1 d2 S1 e
Shim shape applicative inserts

S09B 8.53 3.18 0.4 5.6 7 1.5 0.2 SNMM/G09

S12B 11.7 3.18 0.8 6.6 8 1.5 0.2 SNMM/G12
S15B 14.88 4.76 1.2 7.6 9 2 0.2 SNMM/G15
S19B 18.05 6.35 1.6 8.6 10 2 0.2 SNMM/G19
S22B 21.23 7.93 1.6 9.6 11 2.5 0.2 SNMM/G22
S25B 24.4 7.93 2.4 9.6 11 2.5 0.2 SNMM/G25
MS0903 9.3 3.18 0.8 5.8 6.5 1.87 0.2 SNMM/G09
S MS1204 12.5 4.76 0.8 7.4 8.1 2.77 0.2 SNMM/G12
S1
90
°

∅D ISSN-322 9.14 3.18 0.8 5.94 6.63 1.85 0.5

SNMM/G09**08
E
∅ d1

∅ d2

ISSN-332 9.14 4.76 0.8 5.94 6.63 3.43 0.5

ISSN-432 12.32 4.76 0.79 7.52 8.2 2.59 0.5 SNMM/G12**08

Shim
r e*45°
ISSN-433 12.32 4.76 1.27 7.52 8.2 2.59 0.5
SNMM/G12**12
ISSN-443 12.32 5.3 1.27 7.52 8.2 2.59 0.5
ISSN-533 15.49 4.76 1.27 9.86 10.97 2.59 0.5 SNMM/G15**12
ISSN-633 18.67 4.76 1.27 11.43 12.29 2.59 0.5 SNMM/G19**12
ISSN-846 25.02 6.35 2.4 14.66 15.88 2.72 0.5 SNMM/G25**24
S0903B 9.13 3.18 0.8 5.85 6.7 1.75 0.5 SNMM/G09
SS1203 12.2 3.18 1.2 6.95 8.05 1.75 0.2
S1203B 12.32 3.18 1.27 7.35 8.3 1.75 0.5
M-S15B 14.88 4.76 1.2 7.8 9 2.8 0.5
SNMM/G15
S1504B 15.48 4.76 0.8 9.85 10.9 2.65 0.5

E7 SE*

产品型号Type D S r d1 d2 S1 α
Shim shape applicative inserts

S SEF12 10.5 3 2X45° 5.4 6.7 1.2 SEKT12

SE445 10.3 3.18 2.5x45° 5.1 6.6 1.68 16° SEKT12
α

∅D
∅d2
∅d1
90°

r S1

E8 T*A

产品型号Type D S d r d1 d2 e
Shim shape applicative inserts
60° S T16A 8.53 3.18 4.6 0.4 5.6 6.6 0.2 TNMM/G16
T22A 11.7 3.18 6.1 0.8 7.3 8.5 0.2 TNMM/G22
∅D ∅d
90°

60°

T27A 14.88 4.76 7.1 1.2 8.5 10 0.2 TNMM/G27

∅d1
∅d2
r

e*45°

173

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 E Shim

E9 T*B

产品型号Type D S r d1 d2 S1 e
Shim shape applicative inserts

T16B 8.53 3.18 0.4 5.6 7 1.5 0.2 TNMM/G16

T22B 11.7 3.18 0.8 6.6 8 1.5 0.2 TNMM/G22
T27B 14.88 4.76 1.2 7.6 9 2 0.2 TNMM/G27
MT1603 9.2 3.18 0.8 5.8 6.5 1.87 0.2 TNMM/G16
MT2204 12.5 4.76 1.2 7.3 8 2.7 0.4 TNMM/G22
ITSN-322 9.14 3.18 0.8 5.94 6.63 1.85 0.5 TNMM/G16**08
ITSN-323 9.14 3.18 1.27 5.94 6.63 1.85 0.5 TNMM/G16**12
S
S1 ITSN-333 9.14 4.76 1.27 5.94 6.63 3.43 0.5 TNMM/G16**12
∅
D e*45° ITSN-432 12.32 4.76 0.79 7.52 8.2 2.59 0.5 TNMM/G22**08
E
∅ d1

∅d2

ITSN-433 12.32 4.76 1.27 7.52 8.2 2.59 0.5 TNMM/G22**12

r ITSN-534 15.49 4.76 1.57 9.86 10.72 2.59 0.5 TNMM/G27**16
Shim

ITSN-538 15.49 4.76 3.18 9.86 10.72 2.59 0.5 TNMM/G27**32

ITSN-636 18.67 4.76 2.39 11.43 12.29 2.59 0.5 TNMM/G33**24
ST1603 9 3.18 0.8 5.95 7.05 1.75 0.2
ST1603B 9.13 3.18 1.27 5.85 6.7 1.75 0.5
T1603B 9.13 3.18 1.27 5.85 6.7 1.75 0.5
T1603 9.4 3.3 1 5.8 6.9 2 0.5
T2204B 12.3 3.18 1.27 7.35 8.3 1.75 0.5
T2203B 12.3 3.18 1.27 7.35 8.3 1.75 0.5

E10 V*B

产品型号Type D S r d1 d2 S1 e
Shim shape applicative inserts

IVSN-322 9.14 3.18 0.79 5.94 6.63 1.85 0.5 VNMM/G16**08

IVSN-433 12.32 4.76 1.57 7.52 8.2 2.59 0.5 VNMM/G22**12
SMV-321 8.3 3.2 0.8/0.2 5.4 6.5 1.7 0.5
S
∅D S1 MSV-321 8.6 3.2 0.8/0.2 5.6 6.6 1.5 0.5
35°

∅d2
∅d1

SV1603 9 3.18 0.8 5.95 7.05 1.75 0.5

r e*45° SMV-322 9.1 3.2 0.8/0.2 5.8 6.6 1.7 0.5 VNMM/G16
V1603B 9.14 3.18 0.79 5.85 6.7 1.75 0.5
SM-310 9.14 3.18 0.79 5.41 7.11 1.78 0.5
MSV-322 9.3 3.2 0.8/0.2 5.8 6.4 1.9 0.5

E11 W*A

产品型号Type D S d r d1 d2 e
Shim shape applicative inserts
W08A 11.7 3.18 6.1 0.8 7.3 8.5 0.2 WNMM/G08
80°
S W10A 14.88 4.76 7.1 1.2 8.5 10 0.2 WNMM/G10
∅D ∅d W13A 18.05 6.35 8.7 1.6 10.3 11.5 0.2 WNMM/G13
90°

60°
∅d1

∅d2

SW317 9.35 2.7 5 0.8 6.3 6.6 0.5

r
e*45° TW0803 11.65 3.18 6.9 0.8 7.9 8.6 0.5
WNMM/G08
SW42 12.5 3.18 6.9 1.2 8.5 8 0.5

174

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 E Shim

E12 W*B

产品型号Type D S r d1 d2 S1 e
Shim shape applicative inserts

W8B 11.7 3.18 0.8 6.6 8 1.5 0.2 WNMM/G08

W10B 14.88 4.76 1.2 7.6 9 2 0.2 WNMM/G10
W13B 18.05 6.35 1.6 8.6 10 2 0.2 WNMM/G13
MW0603 9.3 3.18 0.6 5.75 6.45 1.85 0.2 WNMM/G06
80° MW0804 12.6 4.76 0.8 7.4 8.1 2.77 0.2 WNMM/G08
S
D IWSN-322 9.14 3.18 0.8 5.94 6.63 1.85 0.5 WNMM/G06
∅
∅ d1

∅d2

IWSN-432 12.32 4.76 0.8 7.52 8.2 2.59 0.5 WNMM/G08**08

r IWSN-433 12.32 4.76 1.19 7.52 8.2 2.59 0.5 WNMM/G08**12

e*45°
S1 W0603B 9.13 3.18 0.8 5.85 6.7 1.75 0.3 WNMM/G06
SW0803 12.2 3.18 0.8 6.95 8.05 1.75 0.5 E
SMW-432 12.3 4.8 1.2 7.4 8.2 2.6 0.5

Shim
WNMM/G08
W0803B 12.32 3.18 1.19 7.35 8.3 1.75 0.3
WW08 12.4 4.76 0.8 6.6 8.4 2.25 0.5
MSW-432 12.8 4.8 0.8 7.3 8.1 2.6 0.5
W1004B 15.48 4.76 0.8 9.85 10.9 2.65 0.3 WNMM/G10

E13 R*A

产品型号Type D S d d1 d2 e
Shim shape applicative inserts

R10A 9 3.18 4.6 5.6 6.6 0.2 RNMM/G10

S
∅D R12A 11 3.18 6.1 7.3 8.5 0.2 RNMM/G12
∅d
R16A 15 4.76 7.1 8.5 10 0.2 RNMM/G16
90°

60°
∅d1
∅d2

R20A 19 6.35 8.7 10.3 11.5 0.2 RNMM/G20

e*45° R22A 21 6.35 8.7 10.3 11.5 0.2 RNMM/G22
R25A 24 6.35 10.1 12 13 0.2 RNMM/G25

E14 R*B

产品型号Type D S d1 d2 S1 e
Shim shape applicative inserts
R09B 9.4 4.76 4.6 5.8 2 0.2 RNMM/G10
S
S1 R12B 12.5 4.76 6.1 7.4 2 0.2
∅D
IRSN-43 12.47 4.77 7.34 8 2.24 0.76 RNMM/G12
∅d1

∅d2

IRSN-44 12.47 6.41 7.34 8 2.24 0.76

IRSN-62 18.77 3.18 11.25 13.03 1.53 0.76 RNMM/G19
e*45° R1003B 9.6 3.18 5.85 6.7 1.75 0.3 RNMM/G10
R1203B 11.6 3.18 7.35 8.3 1.75 0.3
R1604B 15.6 4.76 9.85 10.9 2.65 0.3 RNMM/G16

175

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 E Shim

E15 KT*

产品型号Type D S S1 d d1
Shim shape applicative inserts

S KTS20 13 5 2.5 4.5 6

S1 KTS25 15 5 2.5 5.5 7
∅D

KTS32 20 5 2 6.5 10
∅d1
∅d

KTS40 25 8 0 6.5 14.5

KTS50 30 8 0 6.5 14.5

E
Shim

E16 STM*(L*)

产品型号Type D S e d d1 R1 R2 L1
Shim shape

60° LW-16LT LW-16RT 9.5 3.18 0.5 4.1 6.1 0.5 1.25 10
S 0.1
LT16R-3.0 LT16L-3.0 9.13 3.18 0.5 5.55 6.6 0.8 7.29
∅d1

∅D
STM16 9.4 3.18 0.5 4 0.4 2 4.65
R1

∅d
B

MT16-M 9.25 3.18 0.5 5.6 0.5 0.5

R2
L1 e×45° STM16L STM16R 9.4 3.18 0.5 4.1 0.4 2 4.65
STM22L STM22R 12.5 3.97 0.5 5.2 0.5 1.8 5.3

176

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
Tochnical information

F1
Cemented Carbide products safety standard 178
F2
Cautions for safely using cutting tools 179
F3
Surface roughness 180
F4
Comparison table of metal materials from different coantries 181
F5
Comparison of grade 184
F6
Comparison table of chipbreaker for turning insert 193

[Link] 177
 Tochnical information

F1 Cemented Carbide products safety standard

1 Features of cemented carbide materials

Cemented carbide cutting tools are mainly comprised by W, C,Co, N, Ti, Si, Al, O etc elements and other chemical compound,and come into shape after
sintering and a series of subsequent machining. Cemented carbide tool possesses good chemical stability and high strength, it is the ideal tool to cut
most of metals and high strength nonmetals.

2 Cautions for safely using cemented carbide tools

1 Cemented carbide is hard and frangible material, it is easy to generate brittle rupture and breakage because of larger force or partial stress, which
causing sharp cutting edge.

2 Most of cemented carbide are mainly comprised of W and Co, which with high density. In the process of transport and storage, special treatment should
be done for great heavy goods and handle them with care.

3 Cemented carbide and steel have different thermal expansion coefficients. In order to avoid breakage caused by concentrated stress, the welding
should be made in suitable temperature.

F 4 Cemented carbide tools should be stored in the dry environment where is far away from the corrosive atmosphere.
Tochnical information

5 In the cutting process, it is unavoidable to generate chips and brittle discs etc, please make sure the labor protection articles are prepared before
machining.

6 If coolant is used in the cutting process, please select correct coolant to prolong the machine and tool lives.

7）Please stop using the tool when it’s generating crackle in the machining process.
8) The long use of cemented carbide tool will lead to cutting edge passivation and lower strength, however,please make sure to regrind by professional
person

9 Please collect the broken tools and chips properly,in case harting other people.

178

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Tochnical information

F2 Cautions for safely using cutting tools

Danger Protective measure

Direct touch with the sharp cutting edges may cause injuries. Please use gloves etc labor protection articles when assemble or disassemble cutting
tools on machine.
Improper use of tools
may cause the tool breakage and be expelled from machine, thus will generate injuries Please read catalogue and safety standard before operating.

Please wear safeguard glasses and protective clothes.

Change the tool with excessive abrasion without delay

Rapid increase of cutting resistance due to excessive abrasion and severe impact may
lead to breakage of tool and spatter of chips, thus cause injuries to operator. Please wear safeguard glasses and protective clothes.

In cutting process, hot chips may generate risk of scald and scuffing. Please use tools such as plier to clear away the chips in time.

Please wear safeguard glasses and protective clothes

In cutting
process, sparks and hot chips may cause risks of fire and explosion. Clear away the inflammable and explosive materials in the cutting area.

At high speed, the machine will vibrate severely because of poor balance of holder etc.,
Please make sure the fire extinguishers are prepared.

Check whether the machine is loose or has any abnormal noise before cutting.
F

Tochnical information
And may cause tool breakage.
Please wear safeguard glasses and protective clothes.

Burrs on workpiece are very sharp and easy to cause injuries. Don’t touch the burrs on the workpiece with bare hand.
Please wear protective gloves and clothes.

Make sure the workpiece is clamped firmly.

If directly machine the workpiece held un-firmly, it will cause tool breakage and splash
of workpiece. Please wear safeguard glasses and protective clothes.

If inserts or spare parts are not clamped properly, they may become Use the suitable tools to set inserts, and make sure the inserts and spare parts are
loose and fly out ,which cause risk of injuries. clamped firmly before machining.

If inserts and tool are clamped too tightly by screw and clamp, it may have the risk of Please not clamp tools too tightly by sleeve
breakage and splash.

Inserts or spare parts may be expelled due to inertial centrifugal force at high cutting Use the tools within recommended cutting conditions.
speed.
Please wear safeguard glasses and protective clothes.
Milling cutters have
sharp cutting edges. Direct touch with them may cause injuries. For your safety, please wear protective gloves if need to touch inserts.

The operator should not wear gloves at rotating cutting.

In rotating cutting, clothes, gloves etc are easy to be wringed to the machine at high
speed, thus cause casualties Please pay attention that the clothes etc should not touch the operational parts of
machine

Please use the tools within the range of recommended rotating speed.
Off-center or poor balance of tools in rotating machining will cause vibration, breakage
and splash of tool, thus will cause injuries. Check and adjust machine balance periodically.

When cutting at high speed, the chips flying out rapidly may cause injuries. Please use protective cover, screen etc safeguard goods.

Please wear safeguard glasses ,protective clothes and gloves.

Using the extremely small drill is easy to cause tool breakage and splash, and hard to Reduce tool vibration and conduct machining at suitable speed.
take out the broken part.
Please wear safeguard glasses ,protective clothes and gloves.

Machine and tools may be damaged if they are used out of specified purposes, thus Please use them strictly according to instructions and specified purposes.
may cause other risks.

179

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Tochnical information

F3 Surface roughness

Type Code Computing method legend

Arithmetic average deviation of

Within sampling length l, the arithmetic average absolute value of profile

Ra deviation is

In the formula, the profile deviation y is the distance between profile points
and reference line in the measuring [Link] line is the profile
least-square average line O. This line divide the profile and make the sum of
squares of profile deviation to be the minimum within the sampling length.
Irregularity ten-point high

Within sampling length l, the sum of the average value of heights of five highest
F profile peak and the depths of five deepest profile valleys
Tochnical information

In the formula, ypi means the height of 'i',the highest profile peak. In the
formula,yvi means the depth of 'i'the deepest profile [Link] height of
Rz profile Ry: the distance between the top profile peak line and the bottom profile
valley line in the longitudinal direction within the sampling length l.

l
Maximum height of profile

The distance between the inner profile peak line and the bottom profile valley
line in the longitudinal direction within the sampling length l.

Top profile peak line is the line that parallels to the reference line and passes
through the highest point of profile peak. Bottom profile line is the line that
parallels to the reference line and passes through the lowest point of profile
valley
Ry

The value Of Sampling Ieng 1 and rva1uation length 1n

Ra/um Rz/um 1/mm 1n=51/mm

﹥0.008 ~ 0.0 2 ≧0 . 0 2 5 ~ 0 . 1 0 0.08 0.4

~ 2 0.1
﹥0.0 ﹥0 .~1 0 . 5 0 0.25 1.25

﹥0.1~ 0.2 ﹥0 .5~0 1 0 . 0 0.8 4.0

﹥0.2~10.0 ﹥1 0 .~1 0 . 5 0 2.5 12.5

﹥10.0 ~ 80.0 ﹥5~0 3 2 0 8.0 40.0

180

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Carbon steel
China Japan Germany Great Britain France Italy Spain Sweden USA
GB JIS W.-nr. DIN BS EN AFNOR UNI UNE SS AISI/SAE
15 STKM12A/STKM12C/S15C 1.0038/1.0401/1.1141 RSt.37-2/C15/Ck15 4360 40 C/080M15 –/32C E24-2Ne/CC12/XC12 –/C15, C16/C16 –/F.111/C15K 1311/1350/1370 A570.36/1015
20 – 1.0402 C22 050A20 2C CC20 C20,C21 F.112 1450 1020
Y13 – 1.0736 9SMn36 240M07 1B S300 CF9SMn36 12SMn35 – 1215
Y15 SUM22 1.0715 9SMn28 230M07 1A S250 CF9SMn28 F.2111/11SMn28 1912 1213
25 S25C 1.1158 Ck25 – – – – – – 1025
35 – 1.0501 C35 060A35 – CC35 C35 F.113 1550 1035
45 – 1.0503 C45 080M46 – CC45 C45 F.114 1650 1045
40Mn – 1.1157 40Mn4 150M36 15 35M5 – – – 1039
35Mn2 SMn438(H) 1.1167 36Mn5 – – 40M5 – 36Mn5 2120 1335
30Mn SCMn1 1.117 28Mn6 150M28 14A 20M5 C28Mn – – 1330
35Mn S35C 1.1183 Cf35 060A35 – XC38TS C36 – 1572 1035
Ck45 S45C 1.1191 Ck45 080M46 – XC42 C45 C45K 1672 1045
50 S50C 1.1213 Cf53 060A52 – XC48TS C53 – 1674 1050
55 –/S55C 1.0535/1.1203 C55/Ck55 070M55 9/– –/XC55 C55/C50 –/C55K 1655/– 1055
60 – 1.0601 C60 080A62 43D CC55 C60 – – 1060
60Mn S58C 1.1221 Ck60 080A62 43D XC60 C60 – 1678 1060

Stainless steel (austenitic type)

F4 Comparison table of metal materials from different coantries

China Japan Germany Great Britain France Italy Spain Sweden USA
GB JIS W.-nr. DIN BS EN AFNOR UNI UNE SS AISI/SAE
OCr19Ni10 SUS304L 1.4306 X2CrNi1911 304S11 – Z2CN18.10 X2CrNi18.11 – 2352 304L

[Link]
OCr18Ni9 SUS304 1.435 X5CrNi189 304S11 58E Z6CN18.09 X5CrNi1810 F.3551/F.3541/F.3504 2332 304
1Cr18Ni9MoZr SUS303 1.4305 X12CrNiS188 303S21 58M Z10CNF18.09 X10CrNiS18.09 F.3508 2346 303
Cr17Ni7 SUS301 1.431 X12CrNi177 – – Z12CN17.07 X12CrNi1707 F.3517 2331 301
0Cr17Ni11Mo2 SUS316 1.4401 X5CrNiMo1810 316S16 58J Z6CND17.11 X5CrNiMo1712 F.3543 2347 316
OCr17Ni13Mo SUS316LN 1.4429 X2CrNiMoN1813 – – Z2CND17.13 – – 2375 316LN

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
OCr27Ni12Mo3 SCS16/SUS316L 1.4435 X2CrNiMo1812 316S13 – Z2CND17.12 X2CrNiMo1712 – 2353 316L
OOCr19Ni13Mo SUS317L 1.4438 X2CrNiMo1816 317S12 – Z2CND19.15 X2CrNiMo1816 – 2367 317L
1Cr18NI9Ti SUS321 1.4541 X10CrNiTi189 321S12 58B Z6CNT18.10 X6CrNiTi1811 F.3553/F.3523 2337 321
1Cr18Ni11Nb SUS347 1.455 X10CrNiNb189 347S17 58F Z6CNNb18.10 X6CrNiNb1811 F.3552/F.3524 2338 347
Cr18Ni12Mo2T – 1.4571 X10CrNiMoTi1810 320S17 58J Z6CNDT17.12 X6CrNiMoTi1712 F.3535 2350 316Ti
1Cr23Ni13 SUH309 1.4828 X15CrNiSi2012 309S24 – Z15CNS20.12 X6CrNi2520 – – 309
Tochnical information

OCr25Ni20 SUH310 1.4845 X12CrNi2521 310S24 – Z12CN2520 X6CrNi2520 F.331 2361 310S
1Cr18Ni9Ti SUS321 1.4878 X12CrNiTi189 321S32 58B, 58C Z6CNT18.12B X6CrNiTi18 11 F.3523 – 321

181
Tochnical information

ventas@[Link]
F
 Tochnical information

F
F4 Comparison table of metal materials from different coantries

182
Alloy steel

China Japan Germany Great Britain France Italy Spain Sweden USA
GB JIS W.-nr. DIN BS EN AFNOR UNI UNE SS AISI/SAE
55Si2Mn – 1.0904 55Si7 250A53 45 55S7 55Si8 56Si7 2085 9255
Gr15 45G SUJ2 1.3505 100Cr6 534A99 31 100C6 100Cr6 F.131 2258 ASTM52100
15Cr SCr415(H) 1.7015 15Cr3 523M15 – 12C3 – – – 5015
40Cr SCr440 1.7045 42Cr4 – – – – 42Cr4 2245 5140
20CrMn SUP9(A) 1.7176 55Cr3 527A60 48 55C3 – – – 5155
Tochnical information

40CrNiMoA – 1.6582 34CrNiMo6 817M40 24 35NCD6 35NiCrMo6(KB) – 2541 4340

35Cr SCr430(H) 1.7033 34Cr4 530A32 18B 32C4 34Cr4(KB) 35Cr4 – 5132
40Cr SCr440(H) 1.7035 41Cr4 530M40 18 42C4 41Cr4 42Cr4 – 5140
18CrMn – 1.7131 16MnCr5 (527M20) – 16MC5 16MnCr5 16MnCr5 2511 5115
30CrMn SCM420/SCM430 1.7218 25CrMo4 1717CDS110/708M20 – 25CD4 25CrMo4(KB) 55Cr3 2225 4130
35CrMo SCM432/SCCRM3 1.722 34CrMo4 708A37 19B 35CD4 35CrMo4 34CrMo4 2234 4137/4135
40CrMoA SCM440 1.7223 41CrMo4 708M40 19A 42CD4TS 41CrMo4 42CrMo4 2244 4140/4142
42CrMo/42CrMnMo SCM440(H) 1.7225 42CrMo4 708M40 19A 42CD4 42CrMo4 42CrMo4 2244 4140
50CrVA SUP10 1.8159 50CrV4 735A50 47 50CV4 50CrV4 51CrV4 2230 6150
CrV,/9SiCr – 1.2067 100Cr6 BL3 – Y100C6 – 100Cr6 – L3
CrWMo SKS31/SKS2,/SKS3 1.2419 105WCr6 – – 105WC13 100WCr6/107WCr5KU 105WCr5 2140 –
5CrNiMo SKT4 1.2713 55NiCrMoV6 BH224/5 – 55NCDV7 – F.520.S – L6
Cr12 SKD1 1.208 X210Cr12 BD3 – Z200C12 X210Cr13KU/X250Cr12KU X210Cr12 – D3 /ASTM D3
40CrMoV5 SKD61 1.2344 X40CrMoV51/X40CrMoV51 BH13 – Z40CDV5 X35CrMoV05KU/X40CrMoV51KU X40CrMoV5 2242 H13/ASTM H13
100CrMoV5 SKD12 1.2363 X100CrMoV51 BA2 – Z100CDV5 X100CrMoV51KU X100CrMoV5 2260 A2

[Link]
30WCrV9 SKD5 1.2581 X30WCrV93 BH21 – Z30WCV9 X28W09KU X30WCrV9 – H21
V SKS43 1.2833 100V1 BW2 – Y1105V – – – W210
W18Cr4VCo5 SKH3 1.3255 S18-1-2-5 BT4 – Z80WKCV X78WCo1805KU HS18-1-1-5 – T4
X45CrSi93 SUH1 1.4718 X45CrSi93 401S45 52 Z45CS9 X45CrSi8 F.322 – HW3
M2 SKH9, SKH51 1.3343 S6/5/2 BM2 – Z85WDCV HS6-5-2-2 F.5603 2722

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
M7 – 1.3348 S 2002/9/2 – – – HS2-9-2 HS2-9-2 2782

Heat-resistant steel
China Japan Germany Great Britain France Italy Spain Sweden USA
GB JIS W.-nr. DIN BS EN AFNOR UNI UNE SS AISI/SAE
– SUH330 1.4864 X12NiCrSi3616 – – Z12NCS35.16 – – – 330
– SCH15 1.4865 G-X40NiCrSi3818 330C11 – – XG50NiCr3919 – – HT,HT50

ventas@[Link]
 F4 Comparison table of metal materials from different coantries
Stainless Steel(Ferrite type/Martensitic
, type)
China Japan Germany Great Britain France Italy Spain Sweden USA
GB JIS W.-nr. DIN BS EN AFNOR UNI UNE SS AISI/SAE
OCr13/1Cr12 SUS403 1.4 X7Cr13 403S17 – Z6C13 X6Cr13 F.3110 2301 403
1Cr13 SUS410 1.4006 X10Cr13 410S21 56A Z10C14 X12Cr13 F.3401 2302 410
1Cr17 SUS430 1.4016 X8Cr17 430S15 60 Z8C17 X8Cr17 F.3113 2320 430
4Cr13 SUS420J2 1.4034 X46Cr13 420S45 56D Z40CM/Z38C13M X40Cr14 F.3405 2304 –
1Cr17Ni2 SUS431 1.4057 X22CrNi17 431S29 57 Z15CNi6.02 X16CrNi16 F.3427 2321 431
Y1Cr17 SUS430F 1.4104 X12CrMoS17 – – Z10CF17 X10CrS17 F.3117 2383 430F
1Cr17Mo SUS434 1.4113 X6CrMo17 434S17 – Z8CD17.01 X8CrMo17 – 2325 434
OCr13Al SUS405 1.4724 X10CrA113 403S17 – Z10C13 X10CrA112 F.311 – 405
Cr17 SUS430 1.4742 X10CrA118 430S15 60 Z10CAS18 X8Cr17 F.3113 – 430
5Cr2Mn9Ni4N SUH35 1.4871 X53CrMnNiN219 349S54 – Z52CMN21.09 X53CrMnNiN219 – – EV8

Gray cast iron

China Japan Germany Great Britain France Italy Spain Sweden USA
GB JIS W.-nr. DIN BS EN AFNOR UNI UNE SS AISI/SAE
HT150 FC150 0.6015 GG15 Grade150 – Ft15 D G15 FG15 115 No 25 B
HT200 FC200 0.602 GG20 Grade220 – Ft20 D G20 – 120 No 30 B
HT250 FC250 0.6025 GG25 Grade260 – Ft25 D G25 FG25 125 No 35 B

[Link]
HT300 FC300 0.603 GG30 Grade300 – Ft30 D G30 FG30 130 No 45 B
HT350 FC350 0.6035 GG35 Grade350 – Ft35 D G35 FG35 135 No 50 B
HT400 – 0.604 GG40 Grade400 – Ft40 D – – 140 No 55 B

Nodular cast iron

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
China Japan Germany Great Britain France Italy Spain Sweden USA
GB JIS W.-nr. DIN BS EN AFNOR UNI UNE SS AISI/SAE
QT400-18 FCD400 0.704 GGG 40 SNG 420/12 – FCS 400-12 GS 370-17 FGE 38-17 07 17-02 60-40-18
QT500-7 FCD500 0.705 GGG 50 SNG 500/7 – FGS 500-7 GS 500 FGE 50-7 07 27-02 80-55-06
QT600-3 FCD600 – GGG 60 SNG 600/3 – FGS 600-3 – – 07 32-03 –
QT700-18 –
Tochnical information

FCD700 0.707 GGG 70 SNG 700/2 FGS 700-2 GS 700-2 FGS 70-2 07 37-01 100-70-03

183

ventas@[Link]
Tochnical information
F
 Tochnical information

F
Tochnical information

BPG10A
GTA

BPC053
BPS051
F5

184

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Tochnical information

Tochnical information
GC4205

GC4215

BPG251

BPG251
BPG253

BPS363

BPC053
BPG253
BPS251

BPC051
BPG363
BPG153

BPG353
BPC053

BPG251
BPS051

BPC102
GTA

BPS101
BPG251
F5

185

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Tochnical information

186
F5
C VD coated grades

GTA SANDVIK ISCAR KENNAMETAL TaeguTec WALTER MiTSUBiSHi SUMITOMO TUNGALOY KYOCERA DIJET HITACHI KORLOY SECO [Link]
ISO Classification

P01

IC9080 TN2510
Tochnical information

P10 BPS153 ACP100 JC730U

IC4100 TN25M

BPS253 FH7020 T200M

P20 GC4020 IC520M TN7525 WAP25 ACP100 JC730U YBM251
BPS201 F7030 T250M

P GC2030 T250M
BPS301
P30 GC4030 IC4050 KC930M TT7300 WAP35 F7030 AC230 T3030 NCM335 T350M YBM351
BPS411
GC4230 T25M

GF30
BPS401 GC4240 KC935M
P40 AC230 GX2030 T350M
BPG403 GC4040 TN7535
GX30

M01

M10 TN25M

BPS253 T350M
IC520M TN7525 F7030 JC730U YBM251
BPS301 T25M

Milling
M M20
S40T
BPS303
M30 S30T KC930M T250M
BPG403 IC4050 WTP35 F7030 T3030 NCM335 YBM351

[Link]
BPG401 GC2040 TN7535 T25M
GC2030
M40 BPS303 GF30 GX30

K01 IC9080 JC600

BPC102 TN5505 ACK200

K10 IC4100 WAK15 F5010 T1015 JC600 NCM310 YBD152
BPC201 TN5515 AC211

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
GC3220
K GC3020 C520M KC915M T150M
K20 BPC102 WAK25 F5020 ACK200 T1015 JC610 NCM320 YBD252
K20D DT7150 TN5520 T200M
K20W

KC930M
K30 BPC402 GC3040 IC4050 JC610 T200M
KC935M

ventas@[Link]
 Tochnical information

Tochnical information
BPG318 BPG35A
BPT15A BPG05B
BPG20A

BPT106
BPG318
BPG058
GTA

BPG10A

BPG318
BPT15A
BPT056
F5

187

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Tochnical information

188
F5
PVD coated grades

GTA SANDVIK ISCAR KENNAMETAL TaeguTec WALTER MiTSUBiSHi SUMITOMO TUNGALOY KYOCERA DIJET HITACHI KORLOY SECO [Link]
ISO Classification

PTH08M
PCA08M
P01 ACP100 JC5003 PCS08M
Tochnical information

TB6005
JX1005
CY9020
PCA12M
BPU106 IC903 WXH15 ACZ310 JC5003
P10 GC1010 KC715M PR730 PR830 TB6005
BP200 IC950 WXM15 ACP100 JC5030
JX1020
BPU10B
PC20M
IC950
ACZ310 JC5015 TB6020
P BPU206 IC900 KC522M PR630 PR730
P20 BPG200 GC1025 VP15TF ACZ330 JC5030 CY150 PC230 F25M YBG202
IC908 KC525M PR830 PR660
ACP200 JC5040 JX1015
IC910
IC900 GH330 TB6045
BPG308 TT7030 ACZ300
BPG20A IC928 VP15TF AH330 PR630 PR660 JC5015 CY250 CY25 PC3530 F25M,
P30 GC1030 KC725M TT7070 WXM35 ACZ350 YBG302
BPU20A IC300 VP30RT AH120 PR730 PR830 JC5040 HC844 JX1045 PC130 F30M
TT9030 ACZ200
IC328 AH740 PTH30E
IC900
PTH30E
IC928 TT8020 ACZ350 F40M,
P40 KC735M WXP45 VP30RT AH120 PR660 JC5040 TB6060
IC300 TT8030 ACP300 T60M
PTH40H

Milling
IC328

[Link]
M01 PCS08M

BPU106 PR630 PR730 CY9020

M10 GC1025 KC715M WXM15 JC5003
BPG108 PR830 JX1020
IC900
JC5015 TB6020
BPU206 IC903 KC522M TT8020 VP15TF ACZ310 PR630 PR730

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
M20 GC2030 GH330 JC5030 CY150 F25M YBG202
BPG308 IC908 KC525M TT9030 VP20RT EH20Z PR830 PR660
M JC5040 JC1015
IC928
VP15TF ACZ330 JC5015 TB6045
IC928 KC725M PR630 PR660 F30M
M30 GC2030 TT8030 WXM35 VP20RT EH20Z AH120 JC5030 CY250 PC9530 YBG302
IC328 KC735M PR730 PR830 F40M
VP30RT ACZ350 JC5040 HC844
TB6060
IC928
M40 VP30RT ACZ350 AH140 PR660 JC5015 PTH40H
IC328
JX1060

ventas@[Link]
 F5
PVD coated grades

SANDVIK ISCAR KENNAMETAL TaeguTec WALTER MiTSUBiSHi SUMITOMO TUNGALOY KYOCERA DIJET HITACHI KORLOY SECO [Link]
GTA
ISO Classification

PTH08M
PR510
K01 BPG056 AH110 JC5003 PCA08M
PR905
PCS08M

CY9020
BPU10B GC1010 IC900 WXH15 ACZ310 AH110 PR510
K10 BPG108 GC1020 KC510M JC5003 TB6005 PC205K YBG102
IC910 WXM15 ACK200 GH110 PR905
BPC10B CY100H
K TB6020
BPU206 IC910 KC520M VP15TF ACZ310 PR510 YBG202
K20 TT6030 AH120 JC5015 CY150 PC215K
BPU200 IC950 KC525M VP20RT ACK200 PR905 YBG152
PTH13S

IC908 TB6045
BPU206 KC725M VP15TF ACZ330
K30 IC950 JC5015 CY250
BPU200 KC735M VP20RT ACK300
IC928 PTH40H

S01 JC5003

BPU10B IC908 KC510M TT6030 VP15TF AH120 PR660 JC5015 PCS08M YBG102
S10
BPG308

Milling
BPG20A KC522M CY100H
S GC1025
S20 BPG30A IC908 TT8020 WXM35 VP15TF PR660
GC2030 KC525M CY10H
BPT30B

IC328 TT8030

[Link]
S30 GC2030 KC725M PR660 F40M
IC928 TT9030

H01 JC5003

PTH08M
GC1010
H10 BPU10B GC1030 KC635M WXH15 VP15TF JC5015 PCA08M F15M
H BPG308 JX1005

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
H20 KC635M WXP45 VP15TF F15M

H30 KC530M F30M

Tochnical information

189

ventas@[Link]
Tochnical information
F
 Tochnical information

190
F5
Cermet

GTA SANDVIK ISCAR KENNAMETAL TaeguTec WALTER MiTSUBiSHi SUMITOMO TUNGALOY KYOCERA DIJET HITACHI KORLOY SECO [Link]
ISO Classification
Tochnical information

IC20N T110A NS520 AT520 TN30 LN10 CC105

P01 AP25N
IC520N T2000Z GT520 GT720 PV30 CX50 CN100

IC20N CC15
BN201 CT5015 KT315 AP25N T1200A NS520 AT530 TN60 TN6020 CX50 CM YNG151
P10 IC520N PV3010 CZ25 CN200
BPN201 GC1525 TT125 NX2525 T2000Z GT720 GT730 PV60 PV7020 CX75 CMP YNG151C
IC530N CT10

P IC20N IC75T AP25N NS530 TN10

T1200A
BN301 IC30N UP35N GT530 TN6020
P20 GC1525 KT325 CT3000 T2000Z CX75 CH550
BPN301 IC520N NX2525 GT730 PV90
T3000Z
IC530N NX3035 NS730 PV7020

IC75T NS530
P30 VP45N T3000Z
IC30N NS730

M01 BN201

NS520 TN60
BN201 NX2525 T110A AT530 TN6020 LN10 CM YNG151
M10 GC1525 TT125 PV3010
BN301 AP25N T2000Z GT530 PV60 CX50 CMP YNG151C
GT720 PV7020
M TN90
NX2525, NS530

[Link]
BN201 T1200A TN6020 CX50
M20 CT3000 AP25N GT730 CH550
BN301 T2000Z PV90 CX75
NX3035 NS730
PV7020

M30 T3000Z

AP25N T110A NS520 AT520 TN30 CC105

K01 LN10

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
NX2525 T2000Z GT520 GT720 PV30 CN100

KT325 AP25N T1200A NS520 GT530 TN60 TN6020 YNG151

K K10 CT5015 CT3000 LN10 CC115
TT125 NX2525 T2000Z GT730 NS730 PV60 PV7020 YNG151C

AP25
K20 T3000Z CX75
NX2525

ventas@[Link]
 Tochnical information

Tochnical information
GTA
F5

191

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Tochnical information

192
F5
Carbide materials

GTA SANDVIK ISCAR KENNAMETAL TaeguTec WALTER MiTSUBiSHi SUMITOMO TUNGALOY KYOCERA DIJET HITACHI KORLOY SECO [Link]
ISO Classification
Tochnical information

P10 BP10 S1P SRT YC10

IC50M SRT
P20 BP20 K125 P10 UTi20T A30N TX25 EX35 ST20
IC28 DX30
P IC50M SR30
P30 BP35 GX K600 P20 UTi20T A30N UX30 PW30 EX35 EX40 ST30A
IC28 DX30

P40 IC28 P30 PW30 SR30 EX45 ST40 YC40

M10 K110M M10 UMN U10 YC10

BM15A DX25
M20 K313 M20 UTi20T A30N EX35 U20
BM25A UMS
M KFM DX25
M30 IC28 UTi20T A30N UX30 EX40 EX45 YC40
K600 UMS

Milling
M40 IC28 M40 TU40 EX45 U40

[Link]
K01 UTi05T KG03 H01 YD051

BU810 K110M H05

K10 H1P IC20 K10 WK10 HTi10 G10E TH10 KW10 KG10 WH10 YD101
BK10 K313 H10

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691
K KT9
IC20
K20 BU820 KFM K20 UTi20T G10E CR1 WH20 G10 HX YD201
IC10
KG20

IC10
K30 BU820 UTi20T KG30
IC28

ventas@[Link]
 Tochnical information

Tochnical information
GTA
F5

193

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 Tochnical information

F
Tochnical information

GTA
F6

194

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 195

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
 196

Mariano López Ortiz 937 [Link] Torreón, Coahuila Tel. (871) 713-6691 ventas@[Link]
[Link]
Calle Mariano López Ortiz 937 Col. Centro
Torreón, Coahuila México
Tel. (871) 713-6691
ventas@[Link]