>

->
da-
bar
Lom sa
Mas

Via
Nuo
va

Via
Ring
Venezia hier
a
Via
Pag
nina

Bologna Via
Flun
o

MO
RDA
Imola NO
>>
lice

<<
6 Se

BOL
Firenze OGN
SS 1

A14

Svincolo - A14 RIM

IMOLA INI >
LA

>
IMO
<<

14th Edition

VB s.r.l. MECHANICAL SECTIONS

Via Selice, 13 TRAINING EQUIPMENT
VB Srl is located in a very 40027 Mordano (Bo) - Italy
central position, at only Tel. +39 0542 641735
30 minute drive from Fax +39 0542 641699
Bologna airport; 1,5
hour from Venice and 1 [Link] MADE IN ITALY
hour from Florence. e-mail: vbcutworld@[Link]
Engines & Models
 VB 4500M TOYOTA HYBRID ENGINE 1NZE-FXE HYBRID SYNERGY DRIVE -

VB 4500
GASOLINE AND ELECTRIC (on stand with wheels)- manual

VB 4500E TOYOTA HYBRID ENGINE 1NZE-FXE HYBRID SYNERGY DRIVE -

GASOLINE AND ELECTRIC (on stand with wheels)- electrical

The Toyota hybrid system (THS) has two sources of power, the petrol engine and the electric motor.
The THS recovers energy otherwise lost to heat in the brakes and uses it to supplement the power
of its fuel-burning engine. MG1 (motor generator 1) generates electrical power and starts the engine;
MG2 (motor generator 2) drives the vehicle. During deceleration the wheels drive MG2 which acts as a
generator for regenerative power recovery. The THS uses different modes to achieve the most efficient
operation in response to driving conditions.

Indicative picture for reference only

Main technical specifications: Approx. weight and dim.:
• 4 cylinders Cm: 104x80x130h
• Displacement: 1500 cc Net Weight: kg 180
• DOHC overhead camshaft Gross Weight: kg 250
• 4 valves per cylinder
• Roller chain
• VVT-I system (Variable Valve Timing with intelli-
gence) electronically controlled intake valves
• Multi-point electronic injection with throttle
• Electrical engine
• Epicyclical engine
Same as VB 4500 but operated electrically by
• Generator
means of two electric motors: one on the pet-
• Transmission belt (CTV)
rol engine and the other on the generator. The
• Gears
electric motors can be operated separately or
• Differential group
simultaneously, according to teaching require-
• Exhaust manifold with Lambda probe
ments.
The engine is provided with nomenclature panel.

The engine is mounted on a stand with wheels and Approx. weight and dim.:
it is operated manually by means of one crank han- Cm: 130x90x155h
dle placed on the thermal engine and one on the Net Weight: kg 190
electric engine in order to simulate the different Gross Weight: kg 300
cycles.
A-2
 VB 4300M ELECTRONIC INJECTION MULTIPOINTS ENGINE WITH PETROL/LPG

VB 4300
FEEDING SYSTEM (on stand with wheels) - manual

Accurate section of an engine, where the main components of the two different feeding circuits (Petrol
and LPG) are sectioned:

Petrol feeding circuit: LPG feeding circuit:

- electro-injectors - genius reducer
- throttle body - LPG electrovalve
- rail - LPG tank with float device for the charge level
- sensors/ phonic wheel - charge socket
- Lambda probe - filter
- electronic ignition - rail and LPG electro-injectors

For the engine specifications see VB 5212 at

page A-19.
Schematic illustration of the different me-
chanical components together with its elec-
tronic and electrical connections.
Indicative picture for reference only

Approx. weight and dim.:

Cm: 70x80x95h
Net Weight: kg 86
Gross Weight: kg 105

A-3
 VB 4400M MAZDA RX TWIN-ROTOR WANKEL ENGINE (on stand with wheels) -

VB 4400
manual

Accurate section of the most common Mazda RX wankel engine, clearly showing the following main
components:
• Drive shaft with flywheel
• Twin-rotor
• Suction and exhaust channels
• Chain-driven oil pump
• Water pump with thermostatic valve
• Electronic injection
• Twin-spark ignition

Indicative picture for reference only

The engine is operated manually by means of a handle. Approx. weight and dim.:
Cm: 70x70x100h
Net Weight: kg 95
Gross Weight: kg 140

A-4
 VB 4550M FERRARI 12 V CYLINDERS ENGINE (on stand with wheels) - manual

VB 4550 - VB 4551
VB 4551M FERRARI 8 V CYLINDERS ENGINE (on stand with wheels) - manual

This accurate section shows the maximum expression of the most advanced automotive technique and
engineering of our region: the Ferrari engine.
Indicative picture for reference only

VB 4550M
Main technical specifications:
• 12 V cylinders
• 4 valves per cylinder
• Displacement: 5999 cc VB 4551M
• DOHC overhead camshaft Main technical specifications:
• 4 variable timing devices on the camshaft • 8 V cylinders
• Multi-point electronic injection • 4 valves per cylinder
• Chain/Belt timing • Displacement: 3000 cc
• 3 oil pumps • DOHC overhead camshaft
• Water pump • Mechanic injection with electronic governor KE3
Jetronic
• Belt distribution
VB 4550M - VB 4551M • Oil pump
Approx. weight and dim.: • Water pump
Cm: 80x100x130h • Alternator
Net Weight: kg 180
Gross Weight: kg 250 The engine is mounted on a stand with wheels and it is
operated manually by means of a crank handle.
A-5
 VB 5440M ENGINE UNIT WITH OVERHEAD CAMSHAFT (OHC) AND TOOTHED

VB 5440 - VB 5445
TIMING BELT (on stand with wheels) - manual

VB 5445M ENGINE UNIT WITH DOUBLE OVERHEAD CAMSHAFT (DOHC) AND

TOOTHED TIMING BELT (on stand with wheels) - manual

Indicative picture for reference only

Main technical specifications:

• 4 stroke petrol engine
• 4 in-line cylinders

The engine is operated manually through a crank han-

dle.

This cutaway model is carefully sectioned for training Approx. weight and dim.:
purposes, professionally painted with different colours Cm: 70x60x80h
to better differentiate the various parts, cross-sections, Net Weight: kg 60
lubricating circuits, fuel system, cooling system etc. Gross Weight: kg 110
Many parts have been chromium, plated and galva-
nized for a longer life.
A-6
 VB 5450M ENGINE UNIT WITH OVERHEAD VALVE (OHV) AND TIMING CHAIN

VB 5450
(on stand with wheels) - manual

Indicative picture for reference only

Main technical specifications:

• 4 stroke petrol engine
• 4 in-line cylinders

The engine is operated manually through a crank han-

dle.

This cutaway model is carefully sectioned for training Approx. weight and dim.:
purposes, professionally painted with different colours Cm: 70x60x80h
to better differentiate the various parts, cross-sections, Net Weight: kg 60
lubricating circuits, fuel system, cooling system etc. Gross Weight: kg 110
Many parts have been chromium, plated and galva-
nized for a longer life.
A-7
 VB 4800E 16 VALVE 4 CYLINDERS FIAT ENGINE WITH MULTI-POINT ELECTRONIC

VB 4800 - VB 4801
INJECTION (on stand with wheels) - electrical

VB 4801M 16 VALVE 4 CYLINDERS FIAT ENGINE WITH MULTI-POINT ELECTRONIC

INJECTION (on stand with wheels) - manual

Indicative picture for reference only

VB 4800E
Main technical specifications:
• 4 in-line cylinders
• Displacement: 2000 cu. cm/1600 cc
• DOHC twin overhead camshaft
• Multipoint electronic injection with ignition-
integrated control unit
• Vibration-damping balancing shafts
• 4 valves per cylinder
• Water cooling
• 12 Volt alternator
• Membrane clutch

The engine operates electrically at 220 volts and runs VB 4801M

at a reduced speed to let the student easily understand Same as VB 4800 but operated
and observe the operation of the various mechanical manually through a crank handle
parts.

This cutaway model is carefully sectioned for training VB 4800E - VB 4801M

purposes, professionally painted with different colours Approx. weight and dim.:
to better differentiate the various parts, cross-sections, Cm: 90x120x125h
lubricating circuits, fuel system, cooling system etc. Net Weight: kg 160
Many parts have been chromium, plated and galva- Gross Weight: kg 210
nized for a longer life.
A-8
 VB 4805E 16 VALVE 4 CYLINDERS FIAT ENGINE WITH MULTI-POINT ELECTRONIC

VB 4805 - VB 4806 - VB 4807 - VB 4808

INJECTION + REAR DRIVE GEARBOX 5 SPEEDS + REVERSE (on stand with wheels)
- electrical

VB 4806E 16 VALVE 4 CYLINDERS FIAT ENGINE WITH MULTI-POINT ELECTRONIC

INJECTION + REAR DRIVE GEARBOX 5 SPEEDS + REVERSE +DIFFERENTIAL WITH
TURBOSUPERCHARGER (on stand with wheels) – electrical

VB 4807E 16 VALVE 4 CYLINDERS FIAT ENGINE WITH MULTI-POINT ELECTRONIC

INJECTION + FRONT DRIVE GEARBOX 5 SPEEDS + REVERSE +DIFFERENTIAL (on
stand with wheels) – electrical

VB 4808E 16 VALVE 4 CYLINDERS FIAT ENGINE WITH MULTI-POINT ELECTRO-

NIC INJECTION + FRONT DRIVE GEARBOX 5 SPEEDS + REVERSE +DIFFERENTIAL
WITH TURBOSUPERCHARGER (on stand with wheels) – electrical
Indicative picture for reference only

Main technical specifications:

• 4 in-line cylinders
• Displacement: 2000 cu. cm/1600 cc
• DOHC twin overhead camshaft
• Multipoint electronic injection with ignition-
integrated control unit
• Vibration-damping balancing shafts
• Gearbox 5 forward speeds + reverse
The engine operates electrically at 220 volts and runs
• 4 valves per cylinder
at a reduced speed to let the student easily understand
• Water cooling
and observe the operation of the various mechanical
• 12 Volt alternator
parts.
• Membrane clutch
This cutaway model is carefully sectioned for training
purposes, professionally painted with different colours
Approx. weight and dim.: to better differentiate the various parts, cross-sections,
Cm: 160x86x100h lubricating circuits, fuel system, cooling system etc.
Net Weight: kg 195 Many parts have been chromium, plated and galva-
Gross Weight: kg 250 nized for a longer life.
A-9
 VB 4600E PETROL ENGINE WITH DIRECT INJECTION 16 VALVES MULTI-POINT

VB 4600 - VB 4601
ELECTRONIC INJECTION - 4 CYLINDERS 4 STROKES (on stand with wheels) -
electrical

VB 4601M PETROL ENGINE WITH DIRECT INJECTION 16 VALVES MULTI-POINT

ELECTRONIC INJECTION - 4 CYLINDERS 4 STROKES (on stand with wheels) -
manual

Petrol engines with direct injection (fuel inlet in the combustion chamber and not in the air suction
duct), have high performances and are designed to comply with the most severe anti-pollution regu-
lations.
We can provide the following:
VB 4600/F - TSI-FSI Audi/Volkswagen
VB 4600/G - GDI Mitsubishi
VB 4600/J - Alfa Romeo JTS

Indicative picture for reference only

VB 4600 F/G/J VB 4601 F/G/J

Main technical specifications: Same as VB 4600 but operated manually by means of
• 4 in-line cylinders a crank handle.
• Displacement: 1400-2000 cc
• DOHC twin overhead camshaft This cutaway model is carefully sectioned for training
• Multi-point electronic injection purposes, professionally painted with different colours
• 4 valves per cylinder to better differentiate the various parts, cross-sections,
• Water cooling lubricating circuits, fuel system, cooling system etc.
• 12V alternator

VB 4600 - VB 4601
Approx. weight and dim.:
The engine is mounted on a stand with wheels and it Cm: 90x110x125h
operates at 220V; it runs at a reduced speed in order to Net Weight: kg 150
let the student easily observe and understand the oper- Gross Weight: kg 210
ation of the various mechanical parts.
A-10
 VB 5150E FIAT 4 CYLINDERS PETROL ENGINE (LONGITUDINALLY MOUNTED)

VB 5150 - VB 5152
WITH L-JETRONIC ELECTRONIC INJECTION REAR wheel-DRIVE (on stand with
wheels) - electrical

VB 5152E FIAT 4 CYLINDERS PETROL ENGINE (TRANSVERSALLY MOUNTED)

WITH L-JETRONIC ELECTRONIC INJECTION FRONT wheel-DRIVE (on stand with
wheels) - electrical
Indicative picture for reference only

VB 5150E VB 5152E FRONT DRIVE

Main technical features:
• Displacement: 2000 cu. cm Same as VB 5150 with Gearbox 5 forward speeds +
• 2 overhead camshafts - DOHC reverse and integrated differential and FRONT wheel-
• MULTIPOINT electronic injection drive.
• 4 in-line cylinders
• Gearbox: 5 forward speeds + reverse
• Max power: 140 hp.
• Electronic ignition

The engine operates electrically at 220 volts and runs VB 5150E - VB 5152E
at a reduced speed to let the student easily understand Approx. weight and dim.:
and observe the operation of the various mechanical Cm: 80x140x110h
parts. Net Weight: kg 140
Gross Weight: kg 200
This cutaway model is carefully sectioned for training
purposes, professionally painted with different colours
to better differentiate the various parts, cross-sections,
lubricating circuits, fuel system, cooling system etc.
Many parts have been chromium, plated and galva-
nized for a longer life.
A-11
 VB 5000E FIAT 4 CYLINDERS PETROL ENGINE CARBURETTOR

VB 5000 - VB 5010 - VB 5020

(on stand with wheels) - electrical

VB 5010E FIAT 4 CYLINDERS PETROL ENGINE CARBURETTOR WITH SIMULATED

IGNITION (on stand with wheels) - electrical

VB 5020M FIAT 4 CYLINDERS PETROL ENGINE CARBURETTOR

(on stand with wheels) - manual

Indicative picture for reference only

VB 5000E VB 5010E
Main technical specifications:
• Displacement: 1200/2000 cu. cm approx. Same as VB 5000 with simulated ignition (small bulbs,
• Camshaft in the crankcase, belt/chain drive - OHV located at the end of the relevant spark plug, lighting
• In-line overhead valves up during the combustion phase).
• Coil ignition
• Mechanical petrol pump
• Gearbox 4 forward speeds + reverse VB 5020M
• Dry single-plate clutch Same as VB 5000 but operated manually through a
The engine operates electrically at 220 volts and runs crank handle (without geared motor and simulated
at a reduced speed to let the student easily understand ignition).
and observe the operation of the various mechanical
parts.

This cutaway model is carefully sectioned for training

VB 5000E - VB 5010E - VB 5020M
purposes, professionally painted with different colours
Approx. weight and dim.:
to better differentiate the various parts, cross-sections,
Cm: 60x155x90h
lubricating circuits, fuel system, cooling system etc.
Net Weight: kg 140
Many parts have been chromium, plated and galva-
Gross Weight: kg 185
nized for a longer life.
A-12
 VB 5100E FIAT 4 CYLINDERS PETROL ENGINE TWIN-SHAFT CARBURETTOR

VB 5100 - VB 5110 - VB 5120

(on stand with wheels) - electrical

VB 5110E FIAT 4 CYLINDERS PETROL ENGINE TWIN-SHAFT CARBURETTOR WITH

SIMULTATED IGNITION (on stand with wheels) - electrical

VB 5120E FIAT 4 CYLINDERS PETROL ENGINE TWIN-SHAFT CARBURETTOR WITH

KKK TURBOSUPERCHARGER + PRESSURE CONTROL VALVE
(on stand with wheels) - electrical
Indicative picture for reference only

VB 5100E VB 5110E
Main technical specifications:
• Displacement: 1600/2000 cu. cm Same as VB 5100 with simulated ignition (small bulbs,
• 2 overhead camshaft driven by a toothed belt - DOHC located on the relevant spark plugs, light up during the
• Overhead valves with V-arrangement combustion phase).
• Coil ignition
• Alternator
• Twin-carburettor VB 5120E
• Gearbox: 5 forward speeds + reverse Same as VB 5100 but complete with KKK turbo-super-
• Dry single-plate clutch charger and pressure control valve.

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.

This cutaway model is carefully sectioned for training VB 5100E - VB 5110E - VB 5120E
purposes, professionally painted with different colours Approx. weight and dim.:
to better differentiate the various parts, cross-sections, Cm: 76x140x100h
lubricating circuits, fuel system, cooling system etc. Net Weight: kg 150
Many parts have been chromium, plated and galva- Gross Weight: kg 220
nized for a longer life.
A-13
 VB 5165E VOLKSWAGEN 4 CYLINDERS PETROL ENGINE WITH K-JETRONIC

VB 5165 - VB 5166
INJECTION (on stand with wheels) - electrical

VB 5166E VOLKSWAGEN 4 CYLINDERS PETROL ENGINE WITH MULTI-POINT

ELECTRONIC INJECTION (on stand with wheels) - electrical

Indicative picture for reference only

VB 5165E
Main technical features:
• Displacement: 1600/1800/2000 cu. cm
• Overhead camshaft (OHC)
• Distribution by means of a toothed belt
• 4 in-line cylinders
• Gearbox: 5 forward speed + reverse, with integrated
differential

VB 5165E - VB 5166E
The engine operates electrically at 220 volts and runs
Approx. weight and dim.:
at a reduced speed to let the student easily understand
Cm: 60x155x90h
and observe the operation of the various mechanical
Net Weight: kg 155
parts.
Gross Weight: kg 205
This cutaway model is carefully sectioned for training
purposes, professionally painted with different colours
to better differentiate the various parts, cross-sections,
lubricating circuits, fuel system, cooling system etc.
Many parts have been chromium, plated and galva-
nized for a longer life.
A-14
 VB 5170E BMW 6 CYLINDERS PETROL ENGINE WITH L-JETRONIC INJECTION

VB 5170 - VB 5175 - VB 5176

(on stand with wheels) - electrical

VB 5175E BMW 6 CYLINDERS PETROL ENGINE WITH K-JETRONIC INJECTION

(on stand with wheels) - electrical

VB 5176E BMW 6 CYLINDERS PETROL ENGINE 24 VALVES WITH MULTI-POINT

ELECTRONIC INJECTION AND TWIN OVERHEAD CAMSHAFT (DOHC)
(on stand with wheels) - electrical

VB 5170E - VB 5175E
Main technical specifications:
• Displacement: 2000/3200 cu. cm
• Overhead camshaft (OHC), valves with V-arrangement The engine operates electrically at 220
• Distribution by means of a roller chain volts and runs at a reduced speed to let
• 6 in-line cylinders the student easily understand and ob-
• Gearbox: 5 forward speeds + reverse serve the operation of the various me-
chanical parts.
Indicative picture for reference only

VB 5176E
Main technical specifications:
• Displacement: 2000/2500 cc
• Double overhead camshaft (DOHC)
• Distribution by means of a roller chain
• 4 valves per cylinder
• 6 in-line cylinders
• Gearbox: 5 forward speeds + reverse
This cutaway model is carefully sectioned for training
VB 5170E - VB 5175E - VB 5176E
purposes, professionally painted with different colours
Approx. weight and dim.:
to better differentiate the various parts, cross-sections,
Cm: 140x80x100h
lubricating circuits, fuel system, cooling system etc.
Net Weight: kg 180
Many parts have been chromium, plated and galva-
Gross Weight: kg 265
nized for a longer life.
A-15
 VB 5178M TOYOTA LEXUS ENGINE 8 V-TYPE CYLINDERS 32 VALVES

VB 5178 - VB 5179
(on stand with wheels) - manual

VB 5179M TOYOTA LEXUS ENGINE 8 V-TYPE CYLINDERS 32 VALVES + GEARBOX

(on stand with wheels) - manual

VB 5178M VB 5179M
Main technical features:
• Displacement 3968cc Same as VB 5178, provided with AISIN AW auto-
• 8 V-type cylinders matic gearbox with 4 forward speeds.
• 4 valves per cylinder (32 total)
• DOHC (double over-head camshaft)
• Bore and stroke 87,5x82,5
• Compression ratio 1:10
• Multi-point electronic fuel injection
• Electronic ignition
• 12V alternator
• Centrifugal water pump

Indicative picture for reference only

VB 5178M
Approx. weight and dim.:
Cm: 100x90x150h
Net Weight: kg 180
Gross Weight: kg 270
The engine is operated manually by means of a crank
handle.

VB 5179M
Approx. weight and dim.:
Cm: 140x90x160h
Net Weight: kg 230
Gross Weight: kg 340

A-16
 VB 5181M TOYOTA PETROL ENGINE WITH VVT.I INJECTION (on stand with wheels)

VB 5181 - VB 5182
- manual

VB 5181E TOYOTA PETROL ENGINE WITH VVT.I INJECTION (on stand with wheels)
- electrical
Indicative picture for reference only

The engine is operated manually by means of a crank

handle.
Main technical specifications:
• 4 cylinders This cutaway model is carefully sectioned for training
• Displacement: 1000-1300 cc purposes, professionally painted with different colours
• DOHC - double overhead camshaft to better differentiate the various parts, cross-sections,
• VVT.I system with electronically controlled intake valves lubricating circuits, fuel system, cooling system etc.
• 4 valves per cylinder
Approx. weight and dim.:
• Roller chain
Cm: 70x90x100h
• Multi-point electronic injection with throttle
Net Weight: kg 60
• 12V alternator
Gross Weight: kg 110
• Thermostatic valve

A-17
 VB 5190E 6 V CYLINDERS PETROL ENGINE CARBURETTOR (on stand with wheels) -

VB 5190 - VB 5195
electrical

VB 5195E 6 V CYLINDERS PETROL ENGINE WITH MULTI-POINT ELECTRONIC

INJECTION (on stand with wheels) - electrical

VB 5190M 6 V CYLINDERS PETROL ENGINE CARBURETTOR (on stand with

wheels) - manual

VB 5195M 6 V CYLINDERS PETROL ENGINE WITH MULTI-POINT ELECTRONIC
INJECTION (on stand with wheels) - manual

Indicative picture for reference only

VB 5190E
Main technical specifications:
• 6 V cylinders
• Displacement: 2800/3200 cu. cm
• Overhead camshaft OHC (1 per head)
• Twin-body carburettor
The engines code VB 5190E and VB
• Centrifugal water pump
5195E operate electrically at 220 volts
• 12 Volt alternator
and run at a reduced speed to let the
• Membrane clutch
student easily understand and observe
This cutaway model is carefully sectioned for the operation of the various mechanical
training purposes, professionally painted with parts.
different colours to better differentiate
VB 5190M
the various parts, cross-sections, lubricating
circuits, fuel system, cooling system etc. Many Same as VB 5190E but operated manu-
parts have been chromium, plated and galva- ally through a crank handle.
nized for a longer life.
VB 5195M
VB 5195E Same as VB 5195E but operated manually through a
Main technical specifications: crank handle
• 6 V cylinders
• Displacement: 2000-3000 cc VB 5190E - VB 5195E - VB 5190M - VB 5195M
• DOHC (2 per head) Approx. weight and dim.:
• Multi-point E.I. Cm: 120x60x100h
• Centrifugal water pump Net Weight: kg 190
• 12V alternator Gross Weight: kg 260
A-18
 VB 5210 CE FIAT PETROL ENGINE CARBURETTOR FEEDING

VB 5210 C - VB 5210 IE - VB 5212 IE

(on stand with wheels) - electrical

VB 5210 IEE FIAT PETROL ENGINE WITH ELECTRONIC FUEL INJECTION -

MONOJETRONIC (on stand with wheels) - electrical

VB 5212 IEE FIAT PETROL ENGINE WITH ELECTRONIC FUEL INJECTION -

MULTI-POINT (on stand with wheels) - electrical

VB 5210 CE VB 5210 IEE - VB 5212 IEE

Main technical specifications: Main technical specifications:
• 4 in-line cylinders • 4 in-line cylinders
• Displacement: 1000/1300 cu. cm • Displacement 1245 cc
• Overhead camshaft - OHC • Overhead camshaft -OHC
• Carburettor • Electronic injection
• Electronic ignition • Electronic ignition
• Alternator • Toothed belt
• Toothed belt • Alternator
Indicative picture for reference only

VB 5210 IEE

Same as VB 5210CE but fed by mono-

jetronic electronic fuel injection and
electronic ignition.

VB 5212 IEE

Same as VB 5210IEE but with multi-point elec-

tronic fuel injection and electronic ignition.
VB 5210 CE - VB 5210 IEE - VB 5212 IEE
The engine operates electrically at 220 volts Approx. weight and dim.:
and runs at a reduced speed to let the student Cm: 67x87x85h
easily understand and observe the operation Net Weight: kg 60
of the various mechanical parts. Gross Weight: kg 120
A-19
 VB 5210 CM FIAT PETROL ENGINE CARBURETTOR FEEDING (on stand with wheels)

VB 5210 C - VB 5210 IE - VB 5212 IE

- manual

VB 5210 IEM FIAT PETROL ENGINE WITH ELECTRONIC FUEL INJECTION -

MONOJETRONIC (on stand with wheels) - manual

VB 5212 IEM FIAT PETROL ENGINE WITH ELECTRONIC FUEL INJECTION -

MULTI-POINT (on stand with wheels) - manual

VB 5210 CM VB 5210 IEM - VB 5212 IEM

Main technical specifications: Main technical specifications:
• 4 in-line cylinders • 4 in-line cylinders
• Displacement: 1000/1300 cu. cm • Displacement 1245 cc
• Overhead camshaft - OHC • Overhead camshaft - OHC
• Carburettor • Electronic injection
• Electronic ignition • Electronic ignition
• Alternator • Toothed belt
• Toothed belt • Alternator

Indicative picture for reference only

VB 5210 IEM

Same as VB 5210IEE but operated

The engine operates electrically manually through a crank handle.
at 220 volts and runs at a reduced
VB 5212 IEM
speed to let the student easily under-
stand and observe the operation of Same as VB 5212IEE but operated
the various mechanical parts. manually through a crank handle.

VB 5210 CM - VB 5210 IEM - VB 5212 IEM

VB 5210 CM Approx. weight and dim.:
Cm: 67x87x85h
Same as VB 5210CE but operated Net Weight: kg 60
manually through a crank handle. Gross Weight: kg 120
A-20
 VB 5220 CE FIAT PETROL ENGINE WITH CARBURETTOR + GEARBOX

VB 5220 C - VB 5220 IE - VB 5222 IE

(on stand with wheels) - electrical

VB 5220 IEE FIAT PETROL ENGINE WITH ELECTRONIC INJECTION -

MONOJETRONIC + GEARBOX (on stand with wheels) - electrical

VB 5222 IEE FIAT PETROL ENGINE WITH MULTI-POINT ELECTRONIC INJECTION +

GEARBOX (on stand with wheels) - electrical
Indicative picture for reference only

VB 5222 IEE
Main technical specifications:
• 4 in-line cylinders
VB 5220 CE • Displacement: 1250 cc
Main technical specifications: • Overhead camshaft - OHC
• 4 in-line cylinders • Electronic ignition
• Displacement: 1000/1300 cu. cm • Multi-point electronic injection
• Overhead camshaft - OHC • Gearbox with 5F + R + differential
• Carburettor VB 5220 IEE
• Electronic ignition
Same as VB 5220CE but with electronic mono-jetronic
• Timing belt distribution
fuel injection.
• Gearbox: 5 forward speeds + reverse with differential
VB 5220 CE - VB 5220 IEE - VB 5222 IEE
The engine operates electrically at 220 volts and run at Approx. weight and dim.:
a reduced speed to let the student easily understand Cm: 120x70x100h
and observe the operation of the various mechanical Net Weight: kg 90
parts. Gross Weight: kg 140
A-21
 VB 5243E MERCEDES A CLASS PETROL ENGINE WITH MULTI-POINT ELECTRONIC

VB 5243
INJECTION + GEARBOX (on stand with wheels) – electrical

VB 5243M MERCEDES A CLASS PETROL ENGINE WITH MULTI-POINT ELECTRONIC

INJECTION + GEARBOX (on stand with wheels) - manual

Indicative picture for reference only

Main technical specifications:

• Mercedes A class petrol engine
• 4 stroke, 4 cylinders
• Displacement: 1600 cc
• Overhead camshaft OHC
• 8 valves
• Multipoint electronic injection
• Oil pump, oil filter
• Air filter, water cooling
• Intake manifold
• Air-mass flow sensor
• Clutch Approx. weight and dim.:
• Gearbox 5 forward speeds + reverse Cm: 110x110x150h
• Differential Net Weight: kg 170
Gross Weight: kg 250
A-22
A-23
 CARBURETTOR CHASSIS

VB 5250 P
VB 5250 PE FRONT DRIVE PETROL ENGINE CHASSIS WITH CARBURETTOR
(on stand with wheels) - electrical

Indicative picture for reference only

Main technical specifications: The engine operates electrically at 220 volts and runs
• Displacement: 900 cu. cm approx. at a reduced speed to let the student easily understand
• Camshaft in the crankcase and observe the operation of the various mechanical
• Single body carburettor parts.
• Coil ignition This cutaway model is carefully sectioned for training
• Gearbox: 4 forward speed + reverse, with differential purposes, professionally painted with different colours
• Mc Pherson front suspension to better differentiate the various parts, cross-sections,
• Rear suspensions + leaf spring lubricating circuits, fuel system, cooling system etc.
• Hydraulic shock absorbers Many parts have been chromium, plated and galva-
• Front disc brake/rear drum brake nized for a longer life.
• Rack steering box

Approx. weight and dim.

Cm: 140x210x90h
Working light system on request. Net Weight: kg 250
Gross Weight: kg 350

A-24
 INJECTION CHASSIS

VB 5272 - VB 5273
VB 5272E PETROL MULTI-POINT ENGINE CHASSIS WITH ABS AND HYDRAULIC
POWER STEERING + WORKING LIGHT SYSTEM (on stand with wheels) - electrical

VB 5273E PETROL MULTI-POINT ENGINE CHASSIS WITH ABS AND HYDRAULIC

POWER STEERING (on stand with wheels) - electrical
Indicative picture for reference only

VB 5272E
This cutaway model is carefully sectioned for training
Main technical specifications:
purposes, professionally painted with different colours
• Fiat chassis with front drive (transversally mounted
to better differentiate the various parts, cross-sections,
engine)
lubricating circuits, fuel system, cooling system etc.
• Petrol engine, 4 cylinders, displacement: 1200 Cu. Cm,
Many parts have been chromium, plated and galva-
complete of all accessories
nized for a longer life.
• Electronic injection MPI (Multipoint) and electronic ig-
nition controlled by a single electronic ECU (engine con-
trol unit)
• Catalytic converter with oxygen (Lambda) sensor
• Gearbox: 5 forward speeds+reverse+ differential
• Hydraulic power steering with double-jointed steering
column
• Brake system with 4 sensors ABS
• Radiator with electric fan
• Front-disc brake
• Rear-drum or disc brake
• Independent wheels McPherson front suspension with VB 5273E
oscillating arms
• Rear independent suspensions with oscillating arms Same as VB 5272E, but without light system.
• Working front and back lighting system controlled by a
dashboard
VB 5272E - VB 5273E
Approx. weight and dim.:
The engine operates electrically 220 volts and runs at a Cm: 220x160x115h
reduced speed to let the student easily understand and Net Weight: kg 290
observe the operation of the various mechanical parts. Gross Weight: kg 400
A-25
 INJECTION CHASSIS

VB 5274 - VB 5275 - VB 5276 - VB 5277

VB 5274E STANDARD PETROL MULTI-POINT ENGINE CHASSIS WITH WORKING
LIGHT SYSTEM (on stand with wheels) - electrical

VB 5275E STANDARD PETROL MULTI-POINT ENGINE CHASSIS

(on stand with wheels) - electrical

VB 5276E PETROL SINGLE-POINT ENGINE CHASSIS WITH WORKING LIGHT

SYSTEM (on stand with wheels) - electrical

VB 5277E PETROL SINGLE-POINT ENGINE CHASSIS (on stand with wheels)

- electrical

VB 5274E VB 5276E
Main technical specifications: Main technical specifications:
• Fiat chassis with front drive (transversally • Fiat chassis with front drive (transversally
mounted engine) mounted engine)
• Petrol engine, 4 cylinders, displacement: 1200 • Petrol engine, 4 cylinders, displacement:
Cu. Cm, complete of all accessories 1100/1200 Cu. Cm, complete of all accessories
• Electronic injection MPI (Multi-point) and elec- • Electronic injection SPI (Single-point) and elec-
tronic ignition controlled by a single electronic tronic ignition controlled by a single electronic
ECU (engine control unit) ECU (engine control unit)
• Catalytic converter with oxygen (Lambda) sen- • Gearbox: 5 forward speeds+reverse+ differential

Indicative picture for reference only

sor • Driving box gauge line with double-jointed
• Gearbox: 5 forward speeds+reverse+ differential steering column
• Driving box gauge line with double-jointed • Radiator with electric fan
steering column • Double circuit brake system with servo brake
• Radiator with electric fan • Front-disc brake
• Double circuit brake system with servo brake • Rear-drum brake
• Front-disc brake • Independent wheels McPherson front suspen-
• Rear-drum brake sions with oscillating arms
• Working front and rear light system controlled • Rear independent suspension with coil spring
by a dashboard and gas shock absorbers
• Working front and rear light system controlled
by a dashboard

VB 5275E VB 5277E

Same as VB 5274E, but without light system. Same as VB 5276E, but without light system.

The engine operates electrically at 230 Volts/

50Hz and runs at a reduced speed to let the stu-
dent easily understand and observe the opera-
tion of the various mechanical parts.

This cutaway model is carefully sectioned for

VB 5274E - VB 5275E - VB5276E - VB 5277E
training purposes, professionally painted with
Approx. weight and dim.:
different colours to better differentiate the var-
Cm: 220x160x115h
ious parts, cross-sections, lubricating circuits,
Net Weight: kg 290
fuel system, cooling system etc. Many parts
Gross Weight: kg 400
have been chromium, plated and galvanized
for a longer life.
A-26
 Indicative picture for reference only

VB 5274 - VB 5275 - VB 5276 - VB 5277

A-27
 CARBURETTOR CHASSIS

VB 5300 - VB 5310 - VB 5320 - VB 5330

VB 5300E FIAT CAR CHASSIS FRONT ENGINE CARBURETTOR WITH REAR DRIVE
(on stand with wheels) - electrical

VB 5310E FIAT CAR CHASSIS FRONT ENGINE CARBURETTOR WITH REAR DRIVE
WITH SIMULATED IGNITION (on stand with wheels) - electrical

VB 5320E FIAT CAR CHASSIS FRONT ENGINE CARBURETTOR WITH REAR DRIVE
(on stand with wheels) - manual

VB 5330E FIAT CAR CHASSIS FRONT ENGINE CARBURETTOR WITH REAR DRIVE
WITH WORKING LIGHT SYSTEM (on stand with wheels) - electrical

Indicative picture for reference only

VB 5300E
Main technical specifications:
• 4-stroke 4 in-line cylinders
• Displacement: 2000 cu. cm VB 5310E
• Gearbox: 4/5 forward speeds + reverse Same as VB 5300E, but with simulated ignition (small
• Hypoid differential bulbs, located on the relevant spark plug, which light
• Camshaft in the crankcase up during the combustion phase).
• Vertical twin carburettor
• Water cooling VB 5320E
• Spring single plate clutch
• McPherson front suspension Same as VB 5300E, but operated manually through a
• Front disc brakes and rear drum brakes crank handle (without geared motor and simulated
• Rack steering box ignition).
• Drive shaft with mechanical and flexible joint
• Rear leaf spring suspension VB 5330E FIAT SINGLE
SHAFT CHASSIS WITH LIGHTS
Same as VB 5300E complete with working light system.
The engine operates electrically at 220 volts and runs Complete with regulation lights, rear fog lights, reverse
at a reduced speed to let the student easily understand and emergency lights, etc.
and observe the operation of the various mechanical The electrical controls are assembled on a dashboard
parts. complete with warning lights.

This cutaway model is carefully sectioned for training VB 5300E - VB 5310E - VB 5320E - VB 5330E
purposes, professionally painted with different colours Approx. weight and dim.:
to better differentiate the various parts, cross-sections, Cm: 145x220x100h
lubricating circuits, fuel system, cooling system etc. Net Weight: kg 300
Many parts have been chromium, plated and galva- Gross Weight: kg 420
nized for a longer life.
A-28
 INJECTION CHASSIS

VB 5340 - VB 5350 - VB 5360 - VB 5370

VB 5340E FIAT DOUBLE SHAFT (DOHC) WITH MULTI-POINT ELECTRONIC
INJECTION WITH LIGHT SYSTEM (on stand with wheels) - electrical

VB 5350E FIAT DOUBLE SHAFT (DOHC) WITH MULTI-POINT ELECTRONIC

INJECTION (on stand with wheels) - electrical

VB 5360E FIAT DOUBLE SHAFT (DOHC) WITH PETROL ENGINE CARBURETTOR

(on stand with wheels) - electrical

VB 5370E FIAT DOUBLE SHAFT (DOHC) WITH PETROL ENGINE CARBURETTOR

WITH WORKING LIGHT SYSTEM (on stand with wheels) - electrical
Indicative picture for reference only

VB 5340E
Main technical specifications:
• 4-stroke petrol engine 4-cylinders Many parts have been chromium, plated and galva-
• Displacement: 2000 cu. cm nized for a longer life.
• Gearbox: 5 forward speeds + reverse
• Differential with hypoid crown wheel and pinion VB 5350E
• Twin overhead camshaft driven by a toothed belt
• Electronic ignition Same as VB 5340, but without working light system.
• Dual braking circuit
• McPherson front suspension VB 5360E
• Front disc brakes and rear drum brakes
• Rack steering box Same as VB 5350, but with petrol engine double shaft
• Rear leaf spring suspension (DOHC) carburettor (same engine as of VB 5100)

Working light system

VB 5370E
The engine operates electrically at 220 volts and runs
at a reduced speed to let the student easily understand Same as VB 5360E complete with working light system.
and observe the operation of the various mechanical
parts.
VB 5340E - VB 5350E - VB 5360E - VB 5370E
This cutaway model is carefully sectioned for training Approx. weight and dim.:
purposes, professionally painted with different colours Cm: 145x220x100h
to better differentiate the various parts, cross-sections, Net Weight: kg 300
lubricating circuits, fuel system, cooling system etc. Gross Weight: kg 420

A-29
 VB 6010E 16 VALVE CHRYSLER TURBO DIESEL ENGINE WITH COMMON-RAIL

VB 6010
INTERCOOLER (on stand with wheels) - electrical

VB 6010M 16 VALVE CHRYSLER TURBO DIESEL ENGINE WITH COMMON-RAIL

INTERCOOLER (on stand with wheels) - manual

Indicative picture for reference only

VB 6010E
Main technical specifications:
• 4 stroke engine; 4 in-line cylinders
• Displacement: 2500/2800 cu. cm
• Power: 150-170 hp At 4000RPM
• Twin overhead camshaft (DOHC) with timing
belt
• 4 valves per cylinder
• Vibration-damping balancing shafts
• Common rail-type direct injection with
electro-injectors
• Turbo-supercharger with air-air intercooler
• Alternator-oil filter-oil pump
VB 6010M

The engine operates electrically at 220 volts and runs Same as VB 6010E but operated manually through a
at a reduced speed to let the student easily understand crank handle.
and observe the operation of the various mechanical
parts.
VB 6010E - VB 6010M
This cutaway model is carefully sectioned for training Approx. weight and dim.:
purposes, professionally painted with different col- Cm: 90x90x120h
ours to better differentiate among the various parts, Net Weight: kg 200
cross-sections, lubricating circuits, fuel system, cooling Gross Weight: kg 270
system etc. Many parts have been chromium, plated
and galvanized for a longer life.
A-30
 VB 6015E FIAT/ALFA ROMEO 8 VALVE ENGINE with TURBO DIESEL COMMN-RAIL

VB 6015 - VB 6017
(on stand with wheels) –electrical

VB 6015M FIAT/ALFA ROMEO 8 VALVE ENGINE with TURBO DIESEL COM-

MN-RAIL (on stand with wheels) – manual

VB 6017E FIAT/ALFA ROMEO 8 VALVE ENGINE with TURBO DIESEL COMMN-RAIL

WITH FRONT DRIVE GEARBOX 5 SPEEDS + REVERSE + DIFFERENTIAL (on stand
with wheels) – electrical
Indicative picture for reference only

VB 6015E VB 6017E
Main technical specifications: Main technical specifications:
• 4 stroke engine; 4 in-line cylinders • 4 stroke engine; 4 in-line cylinders
• Displacement: 1900 cu. cm • Displacement: 1900 cu. cm
• Power: 115 hp. At 4000 RPM • Power: 115 hp. At 4000 RPM
• Overhead camshaft (OHC) with timing belt • Overhead camshaft (OHC) with timing belt
• 2 valves per cylinder • 2 valves per cylinder
• Common rail-type direct injection with elec- • Common rail-type direct injection with elec-
tro-injectors tro-injectors
• Turbo-supercharger • Turbo-supercharger
• Alternator-oil filter-oil pump • Alternator-oil filter-oil pump
• Gearbox 5 speeds + reverse
The engine operates electrically at 220 volts and runs • Differential
at a reduced speed to let the student easily understand • Rear Drive gearbox on request
and observe the operation of the various mechanical
parts. VB 6015M

This cutaway model is carefully sectioned for training Same as VB 6015E but operated electrically.
purposes, professionally painted with different colours VB 6015E - VB 6015M - VB 6017E
to better differentiate the various parts, cross-sections, Approx. weight and dim.:
lubricating circuits, fuel system, cooling system etc. Cm: 90x100x120h
Many parts have been chromium, plated and galva- Net Weight: kg 150
nized for a longer life. Gross Weight: kg 210
A-31
 VB 6020E FIAT TURBO DIESEL ENGINE FOR CAR AND LORRY

VB 6020 - VB 6040
(on stand with wheels) - electrical

VB 6040E FIAT DIESEL ENGINE FOR CAR AND LORRY WITHOUT

TURBOSUPERCHARGER (on stand with wheels) - electrical

Indicative picture for reference only

Main technical specifications:
• 4 stroke engine; 4 in-line cylinders
• Displacement: 1900 cu. cm
• Indirect injection
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Gearbox: 5 forward speeds + reverse
• Water cooling

The engine operates electrically at 220 volts and runs Approx. weight and dim.:
at a reduced speed to let the student easily understand Cm: 85x160x100h
and observe the operation of the various mechanical Net Weight: kg 220
parts. Gross Weight: kg 280

This cutaway model is carefully sectioned for training

purposes, professionally painted with different colours
to better differentiate the various parts, cross-sections,
lubricating circuits, fuel system, cooling system etc.
Many parts have been chromium, plated and galva-
nized for a longer life.
A-32
 VB 6070E REAR DRIVE TURBO DIESEL ENGINE WITH CLUTCH GEARBOX

VB 6070 - VB 6071
(on stand with wheels) - electrical

VB 6071E REAR DRIVE DIESEL ENGINE WITH CLUTCH GEARBOX WITHOUT

TURBOSUPERCHARGER (on stand with wheels) - electrical
Indicative picture for reference only

VB 6070E The engine operates electrically at 220 volts and runs

Main technical specifications: at a reduced speed to let the student easily understand
• 4 stroke engine; 4 cylinders in line and observe the operation of the various mechanical
• Displacement: 1400/1700 cu. cm parts.
• Indirect injection
• Feeding by turbosupercharger
• VE Bosch type rotary injection pump This cutaway model is carefully sectioned for training
• Overhead camshaft (OHC) purposes, professionally painted with different colours
• Distribution through a toothed belt to better differentiate the various parts, cross-sections,
• Alternator lubricating circuits, fuel system, cooling system etc.
• Thermostatic valve Many parts have been chromium, plated and galva-
• Gearbox: 4 forward speeds + reverse nized for a longer life.
• Single-plate clutch with diaphragm
• Water cooling VB 6070E - VB 6071E
Approx. weight and dim.:
Cm: 60x160x100h
Net Weight: kg 150
VB 6071E Gross Weight: kg 210
Same as VB 6070E but without turbo-supercharger.
A-33
 VB 6065E DIESEL ENGINE FOR SMALL CAR (on stand with wheels) - electrical

VB 6065 VB 6065M DIESEL ENGINE FOR SMALL CAR (on stand with wheels) - manual

Indicative picture for reference only

VB 6065E
Main technical specifications:
• 4 stroke engine; 4 in-line cylinders
• Displacement: 1400-1700 cu. cm
• Indirect injection
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Power: 45 hp.
• Water cooling

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
VB 6065M
and observe the operation of the various mechanical
Same as VB 6065E but operated manually through a
parts.
crank handle.
This cutaway model is carefully sectioned for training
purposes, professionally painted with different colours VB 6065E - VB 6065M
to better differentiate the various parts, cross-sections, Approx. weight and dim.:
lubricating circuits, fuel system, cooling system etc. Cm: 85x130x100h
Many parts have been chromium, plated and galva- Net Weight: kg 160
nized for a longer life. Gross Weight: kg 220
A-34
 VB 6068E FRONT DRIVE DIESEL ENGINE WITH CLUTCH-GEARBOX

VB 6068
(on stand with wheels) - electrical

VB 6068M FRONT DRIVE DIESEL ENGINE WITH CLUTCH-GEARBOX

(on stand with wheels) - manual
Indicative picture for reference only

VB 6068E This cutaway model is carefully sectioned for training

Main technical specifications: purposes, professionally painted with different colours
• 4 stroke engine; 4 in-line cylinders to better differentiate the various parts, cross-sections,
• Displacement: 1400-1700 cu. cm lubricating circuits, fuel system, cooling system etc.
• Indirect injection Many parts have been chromium, plated and galva-
• VE Bosch type rotary injection pump nized for a longer life.
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator VB 6068M
• Thermostatic valve
Same as VB 6068E but operated manually through a
• Power: 45/70 cv
crank handle.
• Gearbox: 5 forward speeds + reverse and differential
• Single-plate clutch with diaphragm
VB 6068E - VB 6068M
Approx. weight and dim.:
Cm: 130x86x100h
The engine operates electrically at 220volts and runs Net Weight: kg 140
at a reduced speed to let the student easily understand Gross Weight: kg 200
and observe the operation of the various mechanical
parts.
A-35
 VB 6075M TURBO DIESEL ENGINE (CAR AND LORRY) WITH DIRECT FUEL INJEC-

VB 6075 - VB 6076
TION (on stand with wheels) - manual

VB 6076M TURBO DIESEL ENGINE (CAR AND LORRY) WITH INDIRECT FUEL
INJECTION (on stand with wheels) - manual

Indicative picture for reference only

Main technical specifications: This cutaway model is carefully sectioned for training
• 4 stroke engine; 4 in-line cylinders purposes, professionally painted with different colours
• Displacement: 2500 cu. cm to better differentiate the various parts, cross-sections,
• Direct/indirect injection lubricating circuits, fuel system, cooling system etc.
• Feeding by turbo-supercharger Many parts have been chromium, plated and galva-
• VE Bosch type rotary injection pump nized for a longer life.
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve Approx. weight and dim.:
• Intercooler water-oil Cm: 90x100x120h
• Water cooling Net Weight: kg 200
Gross Weight: kg 260

A-36
 VB 6077E 4 CYLINDERS DIESEL ENGINE FOR FARM TRACTOR

VB 6077
(on stand with wheels) - electrical
Indicative picture for reference only

Main technical specifications: This cutaway model is carefully sectioned for training
• 4 cylinders indirect injection purposes, professionally painted with different colours
• OHV camshaft in the crankcase to better differentiate the various parts, cross-sections,
• Bosch in-line injection pump lubricating circuits, fuel system, cooling system etc.
• Gear timing Many parts have been chromium, plated and galva-
• Water cooling nized for a longer life.
• Gear oil pump
• Displacement:1900 cu. cm

Approx. weight and dim.:

Cm: 90x100x100h
Net Weight: kg 280
The engine operates electrically at 220 volts and runs Gross Weight: kg 340
at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.
A-37
 VB 6078E MERCEDES A CLASS TURBO DIESEL ENGINE 16 VALVES + GEARBOX

VB 6078
(on stand with wheels) – electrical

VB 6078M MERCEDES A CLASS TURBO DIESEL ENGINE 16 VALVES + GEARBOX

(on stand with wheels) – manual

Indicative picture for reference only

Main technical specifications: The engine operates electrically at 220 volts and runs
• Mercedes A class diesel engine at a reduced speed to let the student easily understand
• Direct injection and observe the operation of the various mechanical
• 4 stroke, 4 cylinders parts.
• Displacement: 1700 cc
• Double overhead camshaft (DOHC) This cutaway model is carefully sectioned for training
• 16 valves purposes, professionally painted with different colours
• Timing chain to better differentiate the various parts, cross-sections,
• Common rail turbo diesel lubricating circuits, fuel system, cooling system etc.
• Oil pump, water cooling Many parts have been chromium, plated and galva-
• Air filter with box nized for a longer life.
• Intake manifold, Air mass flow sensor
• Starter motor alternator
• Clutch
Approx. weight and dim.:
• Gearbox 5 forward speeds + reverse
Cm: 110x110x150h
• Differential
Net Weight: kg 200
Gross Weight: kg 280

A-38
 VB 6080E 6 CYLINDERS INTERCOOLER TURBO DIESEL ENGINE 5200 [Link]

VB 6080
(for trucks) (on a sturdy stand with wheels) - electrical
Indicative picture for reference only

Main technical specifications:

• 4 stroke engine; 6 in-line cylinders
• Displacement: 5200 cu. cm
• Direct injection
• Bosch type in-line injection pump with mechanical gov-
ernor
• Intercooler air-air
• Camshaft in the crankcase
• Spring single-plate clutch This cutaway model is carefully sectioned for training
• Fuel fed by turbo-supercharger and intercooler purposes, professionally painted with different colours
• Gearbox: 4 forward speeds + reverse to better differentiate the various parts, cross-sections,
• Geared distribution lubricating circuits, fuel system, cooling system etc.
Many parts have been chromium, plated and galva-
nized for a longer life.
The engine operates electrically at 220 volts and runs
Approx. weight and dim.:
at a reduced speed to let the student easily understand
Cm: 90x180x170h
and observe the operation of the various mechanical
Net Weight: kg 450
parts.
Gross Weight: kg 560
A-39
 VB 6083E 6 CYLINDERS DIESEL ENGINE TRUCK “IVECO” CURSOR WITH

VB 6083
ELECTRONICALLY CONTROLLED PUMP INJECTORS (on a sturdy stand with
wheels) - electrical

Indicative picture for reference only

Main technical specifications:

• Displacement: 7790/10380 cu. Cm. according to what is
available
• 4 stroke; 6 in-line cylinders
• 4 valves per cylinder
This cutaway model is carefully sectioned for training
• Overhead camshaft (OHC)
purposes, professionally painted with different colours
• Water cooling
to better differentiate the various parts, cross-sections,
• Turbo-compressor
lubricating circuits, fuel system, cooling system etc.
• Pump injectors electronically controlled
Many parts have been chromium, plated and galva-
• Pre-heating device
nized for a longer life.

Approx. weight and dim.:

Cm: 200x105x150h
The engine operates electrically at 220 volts and runs Net Weight: kg 950
at a reduced speed to let the student easily understand Gross Weight: kg 1200
and observe the operation of the various mechanical
parts.
A-40
 VB 6084E 8 V CYLINDERS TURBO DIESEL ENGINE FOR TRUCK “IVECO TURBOSTAR

VB 6084
190-38” 17.200 [Link] (on a sturdy stand with wheels) - electrical
Indicative picture for reference only

Main technical specifications:

• 4 strokes, 8 V cylinders
• Displacement: 17.200 cu. cm
• Power: 380 hp
• Direct injection
• Bosch type in-line injection pump with
mechanical governor
• Intercooler water-oil
• 4 valves per cylinder
• Camshaft in the crankcase
• 2 turbo-superchargers
• Geared distribution

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.

This cutaway model is carefully sectioned for training

purposes, professionally painted with different colours Approx. weight and dim.:
to better differentiate the various parts, cross-sections, Cm: 120x185x150h
lubricating circuits, fuel system, cooling system etc. Net Weight: kg 1100
Many parts have been chromium, plated and galva- Gross Weight: kg 1400
nized for a longer life.
A-41
 VB 6091E 6 CYLINDERS TURBO DIESEL COMMON RAIL ENGINE FOR IVECO

VB 6091
TRUCKS (on stand with wheels) – electrical

VB 6091M 6 CYLINDERS TURBO DIESEL COMMON RAIL ENGINE FOR IVECO

TRUCKS (on stand with wheels) – manual

Indicative picture for reference only

Main technical specifications:

The engine operates electrically at 220 volts and runs
• Displacement: 5900 Cm. cu
at a reduced speed to let the student easily understand
• 6 cylinders in-line with direct injection
and observe the operation of the various mechanical
• Camshaft in the crankcase (OHV)
parts.
• Geared timing
• 4 valves per cylinder
This cutaway model is carefully sectioned for training
• Bosch common-rail injection
purposes, professionally painted with different colours
• Waste-gate turbocharger
to better differentiate the various parts, cross-sections,
• Alternator
lubricating circuits, fuel system, cooling system etc.
• Air compressor
Many parts have been chromium, plated and galva-
• Engine oil rotor pump
nized for a longer life.
• Flange power steering pump
• Air conditioning pump Approx. weight and dim.:
• Cooling fan with viscous joint Cm: 140x100x165h
Net Weight: kg 510
Gross Weight: kg 630
A-42
 VB 6122E 2 STROKE 4 CYLINDERS DETROIT DIESEL ENGINE
(on stand with wheels) - electrical

Accurate section of a real industrial engine produced by the American Detroit Diesel; this engine is
widely used in industrial and nautical fields.

The following components are clearly shown and highlighted:

• Air intake channels
• Lobe-type volumetric compressor
• Exhaust valves (2 or 4 per cylinder) controlled by camshaft in the monobloc
• Direct injection by means of a pump/injector for each cylinder
• Vibration-damping balancing shafts
• Water cooling with centrifugal pump
• Lubrication circuit with geared oil pump
Indicative picture for reference only

The engine operates electrically by means of a 220V

gear-motor.

Approx. weight and dim.:

Cm: 110x100x150h
Net Weight: kg 630
Gross Weight: kg 780

A-43
 VB 6140E FIAT TURBO DIESEL REAR DRIVE CHASSIS

VB 6140 - VB 6150 - VB 6160 - VB 6170

(on a sturdy stand with wheels) - electrical

VB 6150E FIAT DIESEL REAR DRIVE CHASSIS WITHOUT TURBOSUPERCHARGER

(on a sturdy stand with wheels) - electrical

VB 6160E FIAT TURBO DIESEL REAR DRIVE CHASSIS WITH WORKING

LIGHT SYSTEM (on a sturdy stand with wheels) - electrical

VB 6170E FIAT DIESEL REAR DRIVE CHASSIS WITHOUT TURBOSUPERCHARGER +

WORKING LIGHT SYSTEM (on a sturdy stand with wheels) - electrical

Indicative picture for reference only

VB 6140E
Main technical specifications:
VB 6150E
• 4 stroke engine; 4 in-line cylinders
• Displacement: 2000/2500 cu. cm Same as VB 6140E without turbo-supercharger.
• Gearbox: 5 forward speeds+reverse
• Single-plate clutch with diaphragm VB 6160E
• Propeller shaft with mechanical and flexible joint
Same as VB 6160E complete with working light system,
• Hypoid differential
regulation light, rear fog lights, reverse and emergency
• Front disc brakes; rear drum brakes with double circuit
lights, etc…
• Rear leaf spring suspension
The electrical controls are assembled on a dashboard
• McPherson suspension front
complete with warning lights.
• Rack steering gear
VB 6170E
The engine operates electrically at 220 volts and runs
at a reduced speed to let the student easily understand Same as VB 6150E complete with working lighting sys-
and observe the operation of the various mechanical tem, regulation light, rear fog lights, reverse and emer-
parts. gency lights, etc…
The electrical controls are assembled on a dashboard
This cutaway model is carefully sectioned for training complete with warning lights.
purposes, professionally painted with different colours VB 6140E - VB 6150E - VB 6160E - VB 6170E
to better differentiate the various parts, cross-sections, Approx. weight and dim.:
lubricating circuits, fuel system, cooling system etc. Cm: 145x220x100h
Many parts have been chromium, plated and galva- Net Weight: kg 420
nized for a longer life. Gross Weight: kg 560
A-44
 VB 6175E FIAT TURBO DIESEL CHASSIS WITH FRONT DRIVE AND WORKING

VB 6175 - VB 6176
LIGHT SYSTEM (on a sturdy stand with wheels) - electrical

VB 6176E FIAT TURBO DIESEL CHASSIS WITH FRONT DRIVE

(on a sturdy stand with wheels) - electrical
Indicative picture for reference only

VB 6175E This cutaway model is carefully sectioned for training

Main technical specifications: purposes, professionally painted with different colours
• Fiat chassis with front drive (engine transversally to better differentiate the various parts, cross-sections,
mounted) lubricating circuits, fuel system, cooling system etc.
• Diesel engine displacement: 1700 cu. Cm.; 4 cylinders Many parts have been chromium plated and galva-
• Indirect injection with pre-chamber nized for a longer life.
• Bosch VE rotary injection pump
• Turbo-compressor with waste-gate valve
• Gearbox: 5 forward speed+reverse+differential
• Hydraulic power steering with double-jointed steering VB 6176E
column Same as VB 6175E, without light system.
• Radiator with electric fan
• Front disc brake
• Rear drum brake Upon Customer’s request, it can be provided with
• Independent wheels McPherson front suspension with ABS
oscillating arms
• Rear independent suspension with coil spring and gas
shock absorbers The electrical controls are assembled on a dashboard
• Front and rear working light system controlled by a complete with warning lights.
dashboard

VB 6175E - VB 6176E
Approx. weight and dim.:
The engine operates electrically at 230 volts/50Hz and Cm: 220x160x115h
runs at a reduced speed to let the student easily under- Net Weight: kg 400
stand and observe the operation of the various me- Gross Weight: kg 545
chanical parts. ELECTRICAL SYSTEM IN COMPLIANCE
WITH EC STANDARS
A-45
 VB 7800E “MOTO GUZZI” MOTORCYCLE 2 CYLINDERS 4 STROKES OHV SHAFT

VB 7800
DRIVE TRANSMISSION WITH IGNITION PLUGS (on stand with wheels) - electrical

Indicative picture for reference only

Careful and complete section of the “Guzzi” motorcycle

with V-type twin-cylinder 350/500 cu. cm. engine. All
internal parts are clearly shown: battery, tank, silencer,
suspensions, carburettor, coil, pistons, connecting rods,
driving shaft, gearbox, selector, etc.

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.
Approx. weight and dim.:
This cutaway model is carefully sectioned for training Cm: 200x70x130h
purposes, professionally painted with different colours Net Weight: kg 160
to better differentiate the various parts, cross-sections, Gross Weight: kg 230
lubricating circuits, fuel system, cooling system etc.
Many parts have been chromium, plated and galva-
nized for a longer life.
A-46
 VB 7850M 2/3/4 CYLINDERS MOTORCYCLE DOHC CHAIN TIMING KAWASAKI

VB 7850
-HONDA-YAMAHA BRAND (on stand with wheels) - manual

According availability

Main technical specifications:

• DOHC engine
• Chain timing
• Electronic ignition
Indicative picture for reference only

This cutaway model is carefully sectioned for training purposes, professionally painted with different col-
ours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling sys-
tem etc. Many parts have been chromium, plated and galvanized for a longer life.
A-47
 VB 7820M “DUCATI” MOTORCYCLE PETROL ENGINE (on table support) - manual

VB 7820
Main technical specifications:
• 4 stroke engine; 2-cylinders
• Displacement: 350/500 cu. cm
• Gearbox: 5 forward speeds
• Camshaft in the crankcase
• Point ignition
• Alternator;
• Oil bath plate-clutch
• Air cooling

The engine is operated manually through a

crank handle.

Approx. weight and dim:

Cm: 50x45x70h
Net Weight: kg 67
Gross Weight: kg 80

Indicative picture for reference only

VB 7840M “VESPA - PIAGGIO” 2 STROKE ENGINE (on stand with wheels) - manual
VB 7840

Main technical specifications:

• Displacement: 125/150 cu. cm
• Multiple-disc clutch
• Distribution by rotary valve
• Carburettor
• Gearbox: 3/4 forward speeds

The engine is operated manually through a

crank handle.

Approx. weight and dim:

Cm: 80x80x60h
Net Weight: kg 30
Gross Weight: kg 45

These cutaway models are carefully sectioned for training purposes, professionally painted with different
colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling
system etc. Many parts have been chromium, plated and galvanized for a longer life.
A-48
 VB 7810M CVT ENGINE 4 STROKES SINGLE-CYLINDER with CARBURETTOR

VB 7810 - VB 7815 - VB 7830

(on stand with wheels)

VB 7815M CVT ENGINE 4 STROKES SINGLE-CYLINDER with ELECTRONIC

INJECTION (on stand with wheels)

VB 7830M CVT ENGINE 2 STROKES SINGLE-CYLINDER with CARBURETTOR

(on stand with wheels)

Main technical specifications:

• Electronic ignition
• Water cooling system
• CVT automatic clutch
• Disc brake
• Silencer
• Manual functioning through
crank handle
Indicative picture for reference only

This cutaway model is carefully sectioned for

training purposes, professionally painted with
different colours to better differentiate the var-
ious parts, cross-sections, lubricating circuits, Approx. weight and dim.:
fuel system, cooling system etc. Many parts Cm: 100x60x80h
have been chromium plated and galvanized for Net Weight: kg 50
a longer life. Gross Weight: kg 75

VB 7831S CVT TRANSMISSION (on stand with wheels) – static

VB 7831
Static model of a Continuously Variable Transmission used on small motorcycle.
The following components are shown:
- Driving wheels
- Driven pulley
- Centrifugal masses
- Belt

Approx. weight and dim.:

Cm: 160x30x40h
Net Weight: kg 12
Gross Weight: kg 18

A-49
 VB 7900E MARINE OUTBOARD ENGINE 2 STROKES (on stand with wheels)

VB 7900 - VB 7915
- electrical

VB 7900M MARINE OUTBOARD ENGINE 2 STROKES (on stand with wheels)

- manual

VB 7915E MARINE OUTBOARD ENGINE 4 STROKES (on stand with wheels)

- electrical

VB 7915M MARINE OUTBOARD ENGINE 4 STROKES (on stand with wheels)

- manual

Indicative picture for reference only

VB 7915 E
Main technical specifications:
• 1 cylinder
• 4-stroke engine
• Water cooling system with centrifugal pump
• Mechanical type converter

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.

VB 7915M

VB 7900E Same as VB7915E but operated manually through a

Main technical specifications: crank handle.
• 2/3 cylinders
• 2-stroke engine This cutaway model is carefully sectioned for training
• Water cooling system with centrifugal pump purposes, professionally painted with different colours
• Mechanical type converter to better differentiate the various parts, cross-sections,
lubricating circuits, fuel system, cooling system etc.
The engine operates electrically at 220 volts and runs Many parts have been chromium, plated and galva-
at a reduced speed to let the student easily understand nized for a longer life.
and observe the operation of the various mechanical
parts. VB 7900E - VB 7900M - VB 7915E - VB 7915M
Approx. weight and dim:
VB 7900M Cm: 80x80x150h
Net Weight: kg 60
Same as VB 7900 but operated manually through a
Gross Weight: kg 100
crank handle.
A-50
 VB 7920M HYDROJET (on stand with wheels) - manual

VB 7920
Approx. weight and dim:
Cm: 200x60x120h
Net Weight: kg 220
Gross Weight: kg 290

“Castoldi” jet drive marine propeller. The unit is carefully sectioned to show every detail.
Indicative picture for reference only

The engine is operated manually through a crank handle.

VB 7930M OUTBOARD MARINE REVERSER (on base) - manual

VB 7930
Mechanical type reverse, universal type, installed on
marine outboard motors.

The engine is operated manually through a crank han-

dle.

Approx. weight and dim:

Cm: 50x40x75h
Net Weight: kg 8
Gross Weight: kg 15

These cutaway models are carefully sectioned

for training purposes, professionally painted
with different colours to better differentiate the
various parts, cross-sections, lubricating cir-
cuits. Many parts have been chromium, plated
and galvanized for a longer life.
A-51
 VB 7940E MARINE INBOARD DIESEL ENGINE WITH INVERTER - 4/6 CYLINDERS

VB 7940
(on stand with wheels) - electrical

Indicative picture for reference only

Main technical specifications:

4 cylinders in line engine or 6 cylinders in line engine to better differentiate the various parts, cross-sections,
according to market availability. lubricating circuits, fuel system, cooling system etc.
Complete of accessories and closed circuit. Many parts have been chromium, plated and galva-
nized for a longer life.
The engine operates electrically at 220 volts and runs
at a reduced speed to let the student easily understand Packing details are provided upon request according
and observe the operation of the various mechanical to the engine type (4 or 6 cylinders).
parts.

This cutaway model is carefully sectioned for training

purposes, professionally painted with different colours

A-52
 VB 7950E MARINE INBOARD DIESEL ENGINE 6/8 V-CYLINDERS WITHOUT

VB 7950
INVERTER (on stand with wheels) - electrical
Indicative picture for reference only

Main technical specifications:

6 V-cylinders engine or 8 V-cylinders engine according to better differentiate the various parts, cross-sections,
to market availability. lubricating circuits, fuel system, cooling system etc.
Complete of accessories and closed cooling circuit. Many parts have been chromium, plated and galva-
nized for a longer life.
The engine operates electrically at 220 volts and runs
at a reduced speed to let the student easily understand Packing details are provided upon request according
and observe the operation of the various mechanical to the engine type (6 or 8 cylinders).
parts.

This cutaway model is carefully sectioned for training

purposes, professionally painted with different colours

A-53
 VB 8000E 4 DRIVING WHEEL TRACTOR “KUBOTA” (on stand with wheels)

VB 8000
- electrical

Indicative picture for reference only

The engine operates electrically at 220 volts and runs

Accurate section of a small tractor with several inter- at a reduced speed to let the student easily understand
esting technical features for educational purposes. and observe the operation of the various mechanical
parts.
Main technical specifications:
• 4-stroke diesel engine 20hp/ 16Kw This cutaway model is carefully sectioned for training
• water cooling system purposes, professionally painted with different colours
• lubrication of trochoid pump to better differentiate the various parts, cross-sections,
• in-line injection pump lubricating circuits, fuel system, cooling system etc.
• dry single-disc clutch Many parts have been chromium, plated and galva-
• Gearbox: 6 speeds + 2 reverse with gear reducer nized for a longer life.
• 2 speed power take-off
Approx. weight and dim.:
• rear differential with mechanical locking
Cm: 190x110x160h
• possibility of disengaging the front drive
Net Weight: kg 345
• rear drum brakes
Gross Weight: kg 500
• sector steering gear box
• hydraulic lifter
A-54
 VB 8300E “MASSEY-FERGUSON”/”LANDINI” FARM TRACTOR 4 DRIVING WHEELS

VB 8300
(on stand with wheels) - electrical
Indicative picture for reference only

Main technical specifications:

• 4 cylinders Perkins diesel engine
• direct injection
• CAV rotary injection pump
• single-disc clutch
• speed gear with reduction unit
• rear hydraulic lifter with rear differential locking and
insertion of the front drive
• PTO

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical Approx. weight and dim.:
parts. Cm: 360x185x215h
Net Weight: kg 2000
This cutaway model is carefully sectioned for training Gross Weight: kg 2470
purposes, professionally painted with different colours
to better differentiate the various parts, cross-sections,
lubricating circuits, fuel system, cooling system etc.
Many parts have been chromium, plated and galva-
nized for a longer life.
A-55
 VB 8100E TYRE-WHEELED FARM TRACTOR WITH DIESEL ENGINE - FIAT “La Picco-

VB 8100 - VB 8110
la” (on stand with wheels) - electrical

VB 8110E TYRE-WHEELED FARM TRACTOR WITH DIESEL ENGINE - FIAT “La Picco-
la” + HYDRAULIC HOIST (on stand with wheels) - electrical

Indicative picture for reference only

VB 8100E VB 8110E
Main technical specifications:
• 4-stroke – 2 cylinders engine Same as VB 8100E with hydraulic hoist.
• Indirect injection
• Water cooling system
• Overhead valves
• In-line injection pump
• Globe-shaped steering box
• Gearbox: 6 forward speeds + 2 reverse

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.

This cutaway model is carefully sectioned for training

purposes, professionally painted with different colours
VB 8100E - VB 8110E
to better differentiate the various parts, cross-sections,
Approx. weight and dim.:
lubricating circuits, fuel system, cooling system etc.
Cm: 265x160x180h
Many parts have been chromium, plated and galva-
Net Weight: kg 650
nized for a longer life.
Gross Weight: kg 830
A-56
 VB 8200E TYRE-WHEELED FARM TRACTOR WITH DIESEL ENGINE - FIAT 25R

VB 8200
(on stand with wheels) - electrical
Indicative picture for reference only

Main technical specifications:

• 4-stroke – 4 cylinders engine
• Displacement: 2000 [Link]
• Indirect injection
• Water cooling system
• Overhead valves
• In-line injection pump
• Globe-shaped steering box
• Gearbox: 4 forward speeds + reverse

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.
Approx. weight and dim.:
This cutaway model is carefully sectioned for training Cm: 220x172x180h
purposes, professionally painted with different colours Net Weight: kg 1030
to better differentiate the various parts, cross-sections, Gross Weight: kg 1250
lubricating circuits, fuel system, cooling system etc.
Many parts have been chromium, plated and galva-
nized for a longer life.
A-57
 VB 8350E TRACKED TRACTOR WITH DIESEL ENGINE - FIAT 25C

VB 8350
(on stand with wheels) - electrical

Indicative picture for reference only

Main technical specifications: This cutaway model is carefully sectioned for training
• 4 stroke-4 cylinders engine purposes, professionally painted with different colours
• Displacement: 2000 cu. cm to better differentiate the various parts, cross-sections,
• Indirect injection lubricating circuits, fuel system, cooling system etc.
• Water cooling system Many parts have been chromium, plated and galva-
• Overhead valves nized for a longer life.
• In-line injection pump
• Multiple-plate steering clutch
• Gearbox: 4 forward speeds + reverse

Approx. weight and dim.:

The engine operates electrically at 220 volts and runs Cm: 230x132x180h
at a reduced speed to let the student easily understand Net Weight: kg 910
and observe the operation of the various mechanical Gross Weight: kg 1200
parts.

A-58
 VB 8360M TRACKED TRACTOR TRANSMISSION (on stand with wheels) - manual

VB 8360 - VB 8370
VB 8370M WHEELED TRACTOR TRANSMISSION (on stand with wheels) - manual
Indicative picture for reference only

VB 8360M
Main technical specifications:
• Clutch unit
• Gearbox
• Pinion gear – ring gear VB 8370M WHEELED TRACTOR TRANSMISSION
• Steering clutch Main technical specifications:
• Final reducer • Clutch unit
The engine is operated manually through a crank han- • Gearbox
dle. • Pinion gear – ring gear
• Differential units axle shafts with band brakes
• Final reducer
VB 8360M
Approx. weight and dim.:
Cm: 140x125x150h The engine is operated manually through a crank han-
Net Weight: kg 450 dle.
Gross Weight: kg 610

This cutaway model is carefully sectioned for training VB 8370M

purposes, professionally painted with different colours Approx. weight and dim.:
to better differentiate the various parts, cross-sections, Cm: 145x170x120h
lubricating circuits. Many parts have been chromium, Net Weight: kg 480
plated and galvanized for a longer life. Gross Weight: kg 590
A-59
 VB 8380M ENGINE POWERED CHAINSAW - manual

VB 8380

Main technical features: Operated manually through a crank handle.

• 2 stroke engine with carburettor
• Centrifugal clutch [Link] and dim.:
• Oil pump for chain lubrication Cm: 90x30x35h
• Electronic ignition Net Weight: kg 5
• Safety system Gross Weight: kg 10

VB 8390M TRANSPLANTER (on stand with wheels) - electrical

VB 8390

Indicative picture for reference only

For the transplant of seedlings of vegetables, flowers, tobacco, nursery plants etc. having bare or conical
roots, pyramidal or cubic peat rootball.
Main technical features:
• Support wheel
• Distributor
• Seat
• Plant cassette
• Ridging and transmission wheel
• Ploughshare
• Coupling for motor-cultivator

Approx. weights and dim.:

Cm: 220x87x127h Operated at 220V by means of gear-mo-
Net Weight: kg 160 tor.
Gross Weight: kg 300

These cutaway items are carefully sectioned for training purposes, professionally painted with different
colours to better differentiate the various parts.
Many parts have been chromium, plated and galvanized for a longer life.
A-60
 VB 8600E MOTOR CULTIVATOR (on stand with wheels) - electrical

VB 8600
Accurate section of a modern petrol motor cultivator with single-cylinder engine, air cooling, 6/10 HP
approx.

Main technical features:

• Petrol engine 4 strokes single cylinder
• Power: 6 Kw
• Recoil starter
• Dry clutch with manual control
• Gearbox MTC 3+2
• Reverse command by lever
• PTO
• Handlebars adjustable both in height and width
• Motor-stop safety device
Indicative picture for reference only

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.
Approx. weight and dim.:
This cutaway model is carefully sectioned for training
Cm: 70x180x110h
purposes, professionally painted with different colours
Net Weight: kg 100
to better differentiate the various parts, cross-sections,
Gross Weight: kg 160
lubricating circuits, fuel system, cooling system etc.

Many parts have been chromium, plated and galva-

nized for a longer life.
A-61
 VB 8610E 9-ROW MECHANICAL SEEDER (on stand with wheels) - electrical

VB 8610

Indicative picture for reference only

Accurate section of a towed universal seeder showing:

• Seed hopper
• Distributor
• Inlet pipes
• Coulter

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
Approx. weight and dim.:
parts.
Cm: 105x135x145h
Net Weight: kg 200
This cutaway model is carefully sectioned for training
Gross Weight: kg 300
purposes, professionally painted with different colours
to better differentiate the various parts.
A-62
 VB 8620E ATOMIZER - electrical

VB 8620
Accurate section of a real agricultural sprayer, used to
spray crops with fungicides.
Indicative picture for reference only

Main technical specification:

• Radial piston pump
• Fibreglass tank with filter
• Control unit
• Overdrive with fan
• Hydraulic stirrer
• Cardan shaft
• Adjustable nozzles

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.
Approx. weight and dim.:
This cutaway model is carefully sectioned for training Cm: 220x110x130h
purposes, professionally painted with different colours Net Weight: kg 220
to better differentiate the various parts, cross-sections, Gross Weight: kg 330
lubricating circuits. Many parts have been chromium,
plated and galvanized for a longer life.
A-63
 VB 8640E MANURE SPREADER (on stand with wheels) - electrical

VB 8640
Accurate section of a pulled manure spreader.

The following parts are shown:

• Hopper
• Spreader disc with blades
• Bevel gear pair
• Spread control

The engine operates electrically at 220

volts and runs at a reduced speed to let
the student easily understand and ob-
serve the operation of the various me-
chanical parts.

Approx. weight and dim.:

Cm: 150x140x160h
Net Weight: kg 135
Gross Weight: kg 230

Indicative picture for reference only

VB 8650M FERTILIZER - manual
VB 8650

Sectioned unit composed of a fertilizer and two irrigators of different types placed on suitable delivery
pipes.
The fertilizer (fully sectioned) is complete with pressure gauge, gate valve, rubber hoses, etc., so that its
real working principle is reproduced.

These cutaway items are carefully sectioned for

Approx. weight and dim.:
training purposes, professionally painted with
Cm: 95x70x160h
different colours to better differentiate the var-
Net Weight: kg 55
ious parts, cross-sections, lubricating circuits.
Gross Weight: kg 90
Many parts have been chromium, plated and
galvanized for a longer life.
A-64
 VB 8660E MODEL OF WHEAT HARVERSTER (on base) - electrical

VB 8660
Indicative picture for reference only

The engine operates electrically at 220 volts and runs

This is a model of a wheat harvester machine. This at a reduced speed to let the student easily understand
model clearly shows the combine harvester main el- and observe the operation of the various mechanical
ements. Moreover, it has been sectioned in order to parts.
show the functioning principles of the internal parts.
This cutaway model is carefully sectioned for training
The model shows:
purposes, professionally painted with different colours
• Cabin
to better differentiate the various parts, cross-sections,
• Engine compartment
lubricating circuits. Many parts have been chromium,
• Wheat tank
plated and galvanized for a longer life.
• Tailing elevator
• Shaking screen
• Fan
• Threshing drum
• Beater
• Conveyor
• Auger Approx. weight and dim.:
• Grain auger Cm: 110x60x60h
• Cutter Net Weight: kg 30
• Revolving wheel Gross Weight: kg 40

A-65
 VB 8661E MODEL OF PICK-UP BALER (on base) - electrical

VB 8661
This is a model of a pick-up baler which is a dragged agricultural machine. It is used for the collection of
the forage which is also pressed into balers.
The model clearly shows its main elements. Moreover, it has been sectioned in order to show the work-
ing principles of the internal parts.

This model is composed by 4 main parts:

• The collecting device
• The woven-wire
• A piston system
• A tying system

The engine operates electrically at 220 Approx. weight and dim.:

volts and runs at a reduced speed to let Cm: 45x80x30h
the student easily understand and ob- Net Weight: kg 15

Indicative picture for reference only

serve the operation of the various me- Gross Weight: kg 25
chanical parts.

VB 8662E GROUND HANDLING AGRICULTURAL MACHINE STEERING MODEL

VB 8662

WITH MULTIPLE DISCS DRY CLUTCHES (on base) - electrical

This is a model of a steering of an agricultural machine for land motion with dry clutches (multiple discs).
This model clearly shows the main elements.

Main technical specifications:

• Transversal axle supports
• Dry clutches multiple discs
• Band brake
• Crown
• Engine and conical pinion

The engine operates electrically at 220 Approx. weight and dim.:

volts and runs at a reduced speed to let Cm: 50x50x30h
the student easily understand and ob- Net Weight: kg 18
serve the operation of the various me- Gross Weight: kg 30
chanical parts.
A-66
 VB 9000A PETROL ENGINE FOR ASSEMBLING & DISASSEMBLING OPERATIONS

VB 9000
(on rotating workbench)

Educational training equipment for assembling and disassembling operations on modern petrol engi-
nes for cars.

Main technical features:

• Petrol engine, 4 stroke
• Displacement: 1242 cu Cm
• 4 cylinders in line with overhead camshaft
• Two valves per cylinder
• Timing system with toothed belt
• Electronic ignition with 4 spark plugs
• Electronic injection
• Alternator
• Lubrication system with mechanical oil pump
• Oil filter
• Flywheel
• Clutch-mechanical dry, single disc

DIESEL ENGINE ON DEMAND

Indicative picture for reference only

Approx. weight and dim.:

Cm: 90x60x120h
Net Weight: kg 100
Gross Weight: kg 140

A-67
 PETROL AND DIESEL ENGINES IN WORKING CONDITIONS (on stand with wheels)

Indicative picture for reference only

Engines in working conditions ready to be started, mounted on a strong steel painted stand with
anti-vibration rubber caps. Each support is equipped with 4 nylon wheels with brake system.

Complete with: • Mesh guards

• Fuel tank • Diagnostic connector (where provided)
• Fuel filter • Instruction manual
• Battery with relevant electric system • Trouble-shooting device simulating 5 faults (upon re-
• Silencer quest)
• Accelerator command
• Starting key
• Rpm counter
• Water temperature device Showing:
• Voltmeter • no-load operation
• Oil pressure indicator • fault simulation on request
• Alternator charger indicator • repair demonstrations
• Radiator with fan/electro-fan • assembly-disassembly
• Coolant tank Perfectly working overhauled engines.

FOR DETAILED DESCRIPTIONS, PLEASE SEE NEXT PAGE

A-68
 PETROL ENGINES COMPLETELY RECONDITIONED AND IN WORKING CONDITIONS

VB 9001F IAW-MARELLI VB 9002F BOSCH VB 9005F IAW-MARELLI

MONOJETRONIC MONOMOTRONIC MULTI-POINT
ELECTRONIC INJECTION - ELECTRONIC INJECTION - ELECTRONIC INJECTION -
functioning functioning functioning
• 4 cylinders FIAT engine • 4 cylinders FIAT/1400 cc engine • 4 cylinders FIAT engine
• 2 valves per cylinder • 3 valves per cylinder • 2 valves per cylinder
• Overhead camshaft (OHC) • Overhead camshaft (OHC) • Overhead camshaft (OHC)
• Electronic ignition • Electronic ignition • Electronic ignition
• Displacement: 1242 cu. Cm • Displacement: 1400 cu. Cm • Displacement: 1242 cu. Cm
• Diagnostic connector • Diagnostic connector • diagnostic connector OBD

Approx. weight and dim.: Approx. weight and dim.: Approx. weight and dim.:
Cm: 115x120x140h Cm: 130x140x140h Cm: 115x120x140h
Net weight: kg 250 Net weight: kg 280 Net weight: kg 250
Gross weight: kg 330 Gross weight: kg 350 Gross weight: kg 330
Indicative picture for reference only

VB 9007F LU-LE JETRONIC VB 9009F BOSCH VB 9011F

BOSCH MULTI-POINT MULTI-POINT MOTRONIC CARBURETTOR -
ELECTRONIC INJECTION - ELECTRONIC INJECTION - functioning
functioning functioning
• 4 cylinders FIAT engine • 4 cylinders FIAT engine • 4 cylinders FIAT/SEAT engine
• 2 valves per cylinder • 4 valves per cylinder • Overhead camshaft (OHC)
• 2 Overhead camshaft (DOHC) • 2 Overhead camshaft (DOHC) • Electronic ignition
• Electronic ignition • Electronic ignition • Displacement: 1000/1500 cu. Cm
• Displacement: 2000 cu. Cm • Displacement: 1300 cu. Cm
• Diagnostic connector • Diagnostic connector OBD

Approx. weight and dim.: Approx. weight and dim.: Approx. weight and dim.:
Cm: 130x130x140h Cm: 130x130x140h Cm: 115x120x140h
Net weight: kg 300 Net weight: kg 300 Net weight: kg 240
Gross weight: kg 400 Gross weight: kg 400 Gross weight: kg 340

A-69
 DIESEL ENGINES COMPLETELY RECONDITIONED AND IN WORKING CONDITIONS

Indicative picture for reference only

VB 9070F FIAT 1700/2500 VB 9080F FIAT 2500 [Link] VB 9095F FIAT COMMON
[Link] DIESEL ENGINE TURBO DIESEL ENGINE RAIL JTD UNIJET -
(indirect injection) - (direct injection) - functioning
functioning functioning

• 4 cylinders, 4 strokes • 4 cylinders 4 strokes • 4 cylinders FIAT engine

• Indirect injection • Direct injection • 2 valves per cylinder
• Overhead camshaft (OHC) • Overhead camshaft (OHC) • Overhead camshaft (OHC)
• Rotating injection pump • Rotating injection pump • Turbo-compressor
• Displacement: 1700/2500 cu. Cm • Displacement: 2500 cu. Cm • Displacement: 1900 cu. Cm
• Turbo-supercharger with relief valve • Diagnostic socket OBD
• On request: multi-jet, 1300 cc,
DOHC, 4 valves per cylinder

Approx. weight and dim.: Approx. weight and dim.: Approx. weight and dim.:
Cm: 140x75x110h Cm: 140x75x110h Cm: 120x130x140h
Net weight: kg 380 Net weight: kg 400 Net weight: kg 350
Gross weight: kg 460 Gross weight: kg 480 Gross weight: kg 450

A-70
 CHASSIS TRAINER IN WORKING CONDITIONS

Approx. weight and dim.:

Cm: 300x150x140h
Net weight: kg 450
Gross weight: kg 730
Indicative picture for reference only

The chassis trainer is realized from a medium displacement vehicle which is particularly useful for the study of
the main components, the repair operations and the diagnostic, by means of the OBD socket (VB 9100 and VB
9110). All the mechanical parts are carefully revised and assembled on a chassis produced by us. This chassis al-
lows an easy display and the possibility of assemble and disassemble each part. Engine, gearbox, clutch, brakes,
lubricating circuit, cooling system, injection, ignition, suspensions, electric system, exhaust, etc. ARE COMPLETELY
FUNCTIONING.
The chassis is supplied with a stand with wheels in order to move it easily.

VB 9100F PETROL VB 9105F TURBO DIESEL VB 9110F COMMON-RAIL

INJECTION CHASSIS CHASSIS TRAINER - CHASSIS TRAINER -
TRAINER - functioning functioning functioning

• Petrol engine 4 cyl. 4 strokes • Turbo diesel engine 4 cyl. 4 strokes • Common rail engine 4 cyl. 4 strokes
• Displacement: 1242 [Link] • Displacement: 1700 [Link] • Displacement: 1900 [Link]
• Multipoint electronic injection • Gearbox: 5 speeds + reverse • Direct injection
• Electronic ignition • Front drive • Gearbox: 5 speeds + reverse
• Gearbox: 5 speeds + reverse • Silencer • Front drive
• Front drive • Bosch VE injection pump • Catalytic silencer
• Catalytic silencer • Depression servo-brake • Electric fuel pump
• Electric fuel pump • Front disc brakes • Depression servo-brake
• Depression servo-brake • Rear drum brakes • Front disc brakes
• Front disc brakes • McPherson front suspension • Rear drum brakes
• Rear drum brakes • Independent wheels rear suspen- • McPherson front suspension
• McPherson front suspension sion with oscillating arms • Independent wheels rear suspen-
• Independent wheels rear suspen- • Hand brake sion with oscillating arms
sion with oscillating arms • Tank • Hand brake
• Hand brake • Battery • Tank
• Tank • Radiator with electric fan • Battery- Radiator with electric fan
• Battery • Dashboard • Dashboard
• Radiator with electric fan • OBD socket
• Dashboard
• Diagnostic socket

A-71
 INDUSTRIAL FUNCTIONING ENGINES (on metallic table-stand support)
SMALL INDUSTRIAL ENDOTHERMIC ENGINES VARIOUS TYPES.
Perfectly functioning engines on a metallic table-stand support with silent block, support for table fixing.
Complete with tank, silencer, air filter, recoil and all the accessorizes.

VB 8900F – SINGLE-CYLINDER 2 STROKE PETROL ENGINE AIR COOLED

(on metallic table-stand support)

Main technical specifications:

• displacement 46 cc
• power 1 hp at 5000 rpm
• recoil starting system
• consumption Kg 0,380 HPH
• electronic ignition
• forced air cooling system
• carburettor

Approx. weight and dim:

Cm: 45x45x50h
Net Weight: kg 10
Gross Weight: kg 20 -> For the same item, cutaway see item VB 7450 at
page A-77

VB 8910F – SINGLE-CYLINDER 4 STROKE PETROL ENGINE AIR COOLED

Indicative picture for reference only

(on metallic table-stand support)

Main technical specifications:

• displacement 163 cc
• power 5,5 hp at 2500 rpm
• recoil starting system
• TCI transistorized magneto ignition
• forced air cooling system
• camshaft in the crankcase
• overhead valves

Approx. weight and dim:

Cm: 48x48x60h
Net Weight: kg 20
Gross Weight: kg 40 -> For the same item, cutaway see item VB 5245 at
page A-73

VB 8920F – SINGLE-CYLINDER 4 STROKE DIESEL ENGINE AIR COOLED

(on metallic table-stand support)

Main technical specifications:

• displacement 211 cc
• direct injection – in-line injection pump
• power 3,8 hp at 3000 rpm
• recoil ignition
• forced air cooling system
• camshaft in the crankcase
• overhead valves

Approx. weight and dim:

Cm: 50x50x60h
Net Weight: kg 30
Gross Weight: kg 50 -> For the same item, cutaway see item VB 6120 at
A-72 page A-73
 VB 5245M SINGLE-CYLINDER 4 STROKE PETROL ENGINE AIR COOLED (on base) -

VB 5245
manual

Main technical specifications:

• displacement 160cc
• power 6 hp
• camshaft in the crankcase
• overhead valves
• rpm regulator
• oil pump
• carburettor
• air filter
• silencer
• tank

Approx. weight and dim:

Cm: 48x48x50h
Net Weight: kg 16
Gross Weight: kg 25
Indicative picture for reference only

VB 6120M SINGLE-CYLINDER 4 STROKE DIESEL ENGINE AIR COOLED (on base) -

VB 6120
manual

Main technical specifications:

• displacement 210cc
• power 4 hp direct injection
• camshaft in the crankcase
• overhead camshafts
• rpm regulator
• toroidal oil pump
• injection pump
• injector
• silencer

Approx. weight and dim:

Cm: 48x48x50h
Net Weight: kg 25
Gross Weight: kg 35

A-73
 VB 7000M INDIRECT INJECTION 4 STROKE DIESEL ENGINE MODEL (on base) -

VB 7000
manual

The most rational training model of

a 4-stroke diesel engine sectioned for
training purposes. Indirect injection,
complete with injection pump, injector,
pre-chamber, preheating glow plug,
cooling system, distribution circuit, etc.
Operated manually through a crank
handle. In order to simulate the active
stage of the cycle a small bulb lights up
during the expansion phase.

Approx. weight and dim.:

Indicative picture for reference only

Cm: 40x40x65h
Net Weight: kg 10
Gross Weight: kg 14

VB 7100M DIRECT INJECTION 2 STROKE DIESEL ENGINE MODEL (on base) - manual
VB 7100

The most rational training model of a

2-stroke diesel engine sectioned for trai-
ning purposes. Direct injection, comple-
te with injection pump, injector, volume-
tric compressor, cooling system, etc.
Operated manually through a crank
handle.
In order to simulate the active stage of
the cycle a small bulb lights up during
the expansion phase.

Approx. weight and dim.:

Cm: 40x40x65h
Net Weight: kg 9
Gross Weight: kg 13

These cutaway models are carefully sectioned for training purposes, professionally painted with different
colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling
system etc. Many parts have been chromium, plated and galvanized for a longer life.
A-74
 VB 7200M 4 STROKE PETROL ENGINE MODEL (on base) - manual

VB 7200
The most rational training model of a
4-stroke petrol engine. Complete with
sectioned carburettor and coil ignition,
cooling system, distribution system,
spark coil, etc. During the combustion
phase a bulb lights up to simulate the
mixture ignition.

The engine is operated manually throu-

gh a crank handle.

Approx. weight and dim.:

Cm: 40x40x70h
Indicative picture for reference only

Net Weight: kg 10
Gross Weight: kg 14

VB 7460M 4 STROKE PETROL ENGINE MODEL WITH ELECTRONIC INJECTION

VB 7460
MONOJETRONIC (on base) - manual

The most rational training model of a

4-stroke petrol engine. During the com-
bustion phase a bulb lights up to simu-
late the mixture ignition.

Main technical specifications:

• Mono-jetronic
• Lambda probe
• Coil single ignition
• Sensor

The engine is operated manually

through a crank handle.

Approx. weight and dim.:

Cm: 40x40x70h
Net Weight: kg 10
Gross Weight: kg 14

These cutaway models are carefully sectioned for training purposes, professionally painted with different
colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling
system etc. Many parts have been chromium, plated and galvanized for a longer life.
A-75
 VB 7490M MULTI-POINT ELECTRONIC INJECTION I.C. ENGINE MODEL

VB 7490
(on a table support) - manual

Built using original parts, this single-cylinder model reunites all the main parts making up a modern
petrol engine with multipoint electronic injection and ignition-integrated control unit. Special care
has been taken with the cutaway views of the electro-injector, throttle body, control unit and LAMBDA
probe.

Main technical specifications:

• Overhead camshaft (OHC)
• Toothed belt timing
• Cartridge oil filter
• Centrifugal water pump
• Air temperature sensor
• Throttle potentiometer
• Idling adjustment motor
• Ignition coil
• LAMBDA probe

Indicative picture for reference only

The engine is operated manually through a
crank handle.

This cutaway model is carefully sectioned for training Approx. weight and dim.:
purposes, professionally painted with different colours Cm: 50x45x80h
to better differentiate the various parts, cross-sections, Net Weight: kg 21
lubricating circuits, fuel system, cooling system etc. Gross Weight: kg 40
Many parts have been chromium, plated and galva-
nized for a longer life.
A-76
 VB 7450M 2 STROKE PETROL ENGINE (on base) - manual

VB 7450
Accurate section of a real 2-Stroke en-
gine, showing every detail, carburettor,
ignition, etc.
The suction-exhaust-transfer channels
are especially highlighted so as to make
is easy to learn the cycle.

Main technical specifications:

• Piston displacement 46 cu. cm
• Air cooling system
• Electronic ignition
• Box carburettor
The engine is operated manually
through a crank handle.

Approx. weight and dim.:

Indicative picture for reference only

Cm: 30x30x40h
Net Weight: kg 8
Gross Weight: kg 15

VB 7400M 2 STROKE MOTORCYCLE PETROL ENGINE (on base) - manual

VB 7400
Accurate section of a real 2-Stroke engi-
ne, cut in every detail, carburettor, igni-
tion, etc.
The suction-exhaust-transfer channels
are especially highlighted so as to make
it easy to learn the cycle.

Main technical specifications:

• Piston displacement 48 cu. cm
• Air cooling
• Plug point and magnet flywheel ignition
• Box carburettor Approx. weight and dim.:
Cm: 24x42x28h
Net Weight: kg 6
The engine is operated manually throu- Gross Weight: kg 10
gh a crank handle.

These cutaway models are carefully sectioned for training purposes, professionally painted with different
colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling
system etc. Many parts have been chromium, plated and galvanized for a longer life.
A-77
 VB 7500M WANKEL ENGINE MODEL (on base) - manual

VB 7500

Rotating engine model, true to the original and

complete with cutaway carburettor.
The rotor (triangular piston), operated by the
driving shaft, rotates inside the stator thus
clearly showing the different phases.
During the compression phase a small bulb
lights up to simulate the petrol ignition.
Light metal construction.
Approx. weight and dim.:
Cm: 20x40x30h

Indicative picture for reference only

Net Weight: kg 6
The engine is operated manually through a Gross Weight: kg 7
crank handle.

VB 9220M STEAM ENGINE MODEL (on base) - manual

VB 9220

Educational model of a modern horizontal steam en- Approx. weight and dim.:
gine with piston valve control. The model can be put Cm: 36x22x24h
in motion by turning the flywheel, thus showing the Net Weight: kg 3
manner of operation of the engine and of the built-on Gross Weight: kg 8
centrifugal governor.
A-78
 VB 9200E TURBO JET ENGINE MODEL (on base) - electrical

VB 9200
This super-model of a modern two-wave turbine shows in detail the construction and the operating
system of such a motor. Low-pressure and high-pressure compressor, low-pressure and high-pressure
turbine are readily recognisable, as also are the combustion chambers with the injection nozzles and
starting plugs.

These can be readily seen thanks to the section cut housing. The turbines can be set in motion with the
built-in electro-motor.
Approx. weight and dim.:
Cm: 70x28x45h
Net Weight: kg 13
Gross weight: Kg 30
Indicative picture for reference only

VB 9210E TURBO JET ENGINE MODEL WITH HIGH-PRESSURE COMPRESSOR

VB 9210
(on base) - electrical

This super-model of a modern two-wave turbine shows in detail the construction and the operating
system of such a motor. High-pressure compressor, high pressure turbine are readily recognisable, as
well as the combustion chambers with the injection nozzles and starting plugs. These can be easily
seen thanks to the section cut housing. The turbines can be set in motion by means of the built-in elec-
tro-motor.

Approx. weight and dim.:

Cm: 60x40x40h
Net weight: Kg 10
Gross weight: Kg 20

A-79
 VB 9260E OPPOSED-PISTON ENGINE (on stand with wheels) - electrical

VB 9260

Indicative picture for reference only

Main technical specifications:
• Lycoming/Piaggio/Continental 4/6-opposed cylinders
engine
• Air cooling system
• Gear distribution with camshaft in the crankcase
• Ignition with magneto
• Single-body carburettor

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.

This cutaway model is carefully sectioned for training

Approx. weight and dim.:
purposes, professionally painted with different colours
Cm: 140x110x150h
to better differentiate the various parts, cross-sections,
Net Weight: kg 190
lubricating circuits, fuel system, cooling system etc.
Gross Weight: kg 280
Many parts have been chromium, plated and galva-
nized for a longer life.
A-80
 VB 9280E RADIAL ENGINE (on stand with wheels) - electrical

VB 9280
This kind of engine was largely used in aeronautic before the introduction of reaction engines. As it is
mechanically simple and sturdy, it is used for tanks, hovercrafts, etc.
Indicative picture for reference only

Main technical specifications:

• Driving shaft with integral master rod and
moving connection rods
• Air cooling system
• Double ignition (2 spark plugs per cylinder and 2
magnetos)

The engine operates electrically at 220 volts and runs

at a reduced speed to let the student easily understand
and observe the operation of the various mechanical
parts.

This cutaway model is carefully sectioned for training Approx. weight and dim.:
purposes, professionally painted with different colours Cm: 150x140x180h
to better differentiate the various parts, cross-sections, Net Weight: kg 700
lubricating circuits, fuel system, cooling system etc. Gross Weight: kg 850
Many parts have been chromium, plated and galva-
nized for a longer life.
A-81
 >
->
da-
bar
Lom sa
Mas

Via
Nuo
va

Via
Ring
Venezia hier
a
Via
Pag
nina

Bologna Via
Flun
o

MO
RDA
Imola NO
>>
lice

<<
6 Se

BOL
Firenze OGN
SS 1

A14

Svincolo - A14 RIM

IMOLA INI >
LA

>
IMO
<<

14th Edition

VB s.r.l. MECHANICAL SECTIONS

Via Selice, 13 TRAINING EQUIPMENT
VB Srl is located in a very 40027 Mordano (Bo) - Italy
central position, at only Tel. +39 0542 641735
30 minute drive from Fax +39 0542 641699
Bologna airport; 1,5
hour from Venice and 1 [Link] MADE IN ITALY
hour from Florence. e-mail: vbcutworld@[Link]