Scribd
Upload
77 views1 page

Precision Grease for Metal Bearings

Clock-Grease 859-8 + PTFE is a precision grease developed for metal bearings in clock movements and other precision applications. It contains a fully synthetic base oil and special thickener combination that provides high adhesion, optimized oil separation, and reduced stick-slip effects. Testing shows it has low friction coefficients, very good durability and drop stability, and compatibility with metals. The grease is recommended for brass and steel bearings from 0.1 to 10 mm in clock movements, gears, and other precision mechanical devices.

Uploaded by

statisticssales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views1 page

Precision Grease for Metal Bearings

Clock-Grease 859-8 + PTFE is a precision grease developed for metal bearings in clock movements and other precision applications. It contains a fully synthetic base oil and special thickener combination that provides high adhesion, optimized oil separation, and reduced stick-slip effects. Testing shows it has low friction coefficients, very good durability and drop stability, and compatibility with metals. The grease is recommended for brass and steel bearings from 0.1 to 10 mm in clock movements, gears, and other precision mechanical devices.

Uploaded by

statisticssales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Clock-Grease 859-8 + PTFE

Article No. TF1850


Precision Grease with Excellent Friction Behavior
Product Specifications
Product
Laboratory Data: Tribological Data:
Test System: sphere on prism (ISO 7148/2)
Penetration
Unworked Worked friction moment M
quarter cone penetration penetration
1/2" sphere
235 - 285 250 - 310 prism Bearing material
mm/10 mm/10

normal load FN
NLGI Class 3

Consistency firm Friction Behaviour


dependent on sliding speed Application
temperature
v (mm/s) f friction coefficient f
0.1 0.2 0.3 0.4
Color yellow/white
0 0.08
Dropping Point 180 °C [356 °F] 20 0.06
Oil Separation (FTMS) 5% 50 0.04
48 hrs/85 °C [185 °F] 200 0.04
Permanent Low Temperature -20 °C
Base Oil 72 hrs fluid [-4 °F] materials: steel/brass, load 3 N, 25 °C [77 °F]
lubricant: Clock-Grease 859-8 + PTFE Bearing load
Application Temperature -10 °C to +80 °C
[+14 °F to +176 °F]

Base Oil synthetic oil on ester Wear Behaviour


comparison: dry and lubricated with Clock-Grease 859-8 + PTFE
base (free of silicones)
materials wear (in mm)
Viscosity Base Oil 150 mm²/s 0.01 0.03 0.1 0.3 1.0
20 °C [68 °F] St/brass: TF1850
Thickener metallic soaps, dry Sliding speed
anti-separation-gel, St/steel: TF1850
micro PTFE particles dry
Durability very good test parameters: load 30 N, distance 10 km,
Drop Stability very good 25 °C [77 °F], v=28.1 mm/s
Corrosion Resistance brass: very good
steel: very good
Durability
Compatibility with Plastics on request

Comments: Application:
Clock-Grease 859-8 + PTFE has been developped For metal bearings in clock movements, counters,
especially for precision bearings out of metals. It alarm clocks, helical gear trains, measuring devices,
contains a fully syntheticbase oil with high load precision gears, mainsprings, plotters, printers. For Viscosity
carrying capacity and excellent ageing stability. A all brass/steel bearings from 0.1 to 10 mm diameter
special thickener combination out of metallic (0.004 to 3/8 inches). For barrels, clicks, guidances,
soaps, anti-separation-gel and micro PTFE particles etc.
guarantees high adhesion, an optimized oil
separation behavior and a strong reduction of
stick-slip effects. Very low friction coefficients.

Clock-Grease 859-8 + PTFE is free of silicones. If


applied with plastics please test their compatibility Wetting
or request results.

P285
Dr. Tillwich GmbH Werner Stehr Phone: +49 (0) 7451 5386-0 All information reflects our best knowledge. No responsibility is Certified
Murber Steige 26 Telefax: +49 (0) 7451 5386-70 taken for printed data. Technical and chemical changes may occur acc. to
D-72160 Horb (Ahldorf) [email protected] without notice. We cannot be held liable for any use or application. ISO 9001

You might also like