Republic of the Philippines
Department of Education
Region V
SCHOOLS DIVISION OF SORSOGON
LEARNING ACTIVITY SHEET
Quarter - 1
TECHNOLOGY AND LIVELIHOOD EDUCATION – Grade 10
Electronic Product Assembly and Servicing
Student Name: ______________________ Grade & Section: ______________
Teacher: ___________________________ Date Submitted: ______________
I. Introductory Concept
This lesson contains information and learning activities in preparing materials, tools, equipment
needed for assembling a power supply
II. Learning Competencies: Prepare unit, tools, and workplace for installation and service
Code: TLE_IAEPAS9-12SCEP-DEARE-IVa-b-42
Sub Topic: Prepare necessary tool, test instrument, and PPE in line with job requirements
OBJECTIVE/S
1. Identify the different kinds of tools used in EPAS
2. Classify tools according to job description
3. Appreciate the importance of knowing the different kinds of hand tools in EPAS
III. Activities
A. Lesson Information
Basic Hand Tools
Driving of Tools
1. Screwdrivers are hand tools specifically designed to insert and
tighten, or to loosen and remove screws. A screwdriver comprises a head or tip,
which engages with a screw, a mechanism to apply force by rotating the tip, and
some way to position and support the screwdriver, the tip of which is shaped in to fit a
particular type of screw.
a. Flat Screwdriver- is used
to drive or fasten negative slotted
screws
b. Phillips Screwdriver – used
to drive or fasten positive slotted screws. It is a screwdriver that could
take greater torque and could provide tighter fastenings.
Soldering Tools
1. Soldering Iron – is a device for applying heat to melt solder in attaching
two metal parts.
2. Desoldering tool - is used in removing soldered
wires and components on printed circuit boards for
troubleshooting and repair purposes.
Splicing Tools
1. Long Nose - is used for holding, bending, and stretching the
lead of electronic component or connecting wires.
2. Side Cutter
- is a wire-cutting pliers, though they are not used to grab or turn
anything, but are used to cut wires.
3. Wire
Stripper - is a pair of opposing blades much like scissors or wire cutters.
The addition of a center notch makes it easier to cut the insulation
without cutting the wire.
TLE-EPAS_Grade10_Q1_LAS2
Boring Tools
1. 12V Mini-Drill – is used to bore or drill holes in the printed circuit board (PCB)
with sizes from 1/32” – 1/16”.
Cutting Tools
1. Utility Knife- is a common tool used in cutting various
trades and crafts for a variety of purposes.
2. Hacksaw- is used for cutting metals. Some
have pistol grips which keep the hacksaw firm and easy to grip. The
small hand-held hacksaws consist of a metal arch with a handle that
fits around a narrow, rigid blade
Auxiliary Tools
1. Magnifying Glass- The lens is usually mounted on a frame with a handle. Roger Bacon
is the original inventor of the magnifying glass. A magnifying glass works by creating a magnified virtual
image of an object behind the lens. Some magnifying glasses are foldable with built-in light.
2. Paint Brush – made of bristles set in handle,
use for cleaning dirty parts of a circuit or an object.
B. TASK 1: Identification of tools in EPAS
DIRECTIONS: Identify the tools from box A according to its uses/ function on box B given
below. Write the LETTER of your answer on the Answer Sheet
Box A
1. 2. 3. 4. 5.
6. 7. 8. 9. 10.
TLE-EPAS_Grade10_Q1_LAS2
Box B
A. Used to Tighten/loosen cross head nuts and bolts
B. Cut the insulation without cutting the wire
C. Drill holes in the printed circuit board
D. Tighten, loosen or remove Flat screws
E. Hold, bend, stretch the lead of electronic component or connecting wires
F. Clean dirty parts of an object
G. used for cutting various trade
H. Tighten, loosen or remove positive screws
I. Used to cut metals or wood
J. Used to create a magnified image
K. Used to cut the wire
[Link] ASSESSMENT
Direction: Classify the different kinds of hand tools according to their specification in Consumer
Electronics Servicing. Write your answer on the Answer Sheet
Hand tools Classification
Ex. Paint Brush Auxillary
1. Desoldering Tool
2 W ire Splicer
3. Side Cutter
4 Long Nose Pliers
5 Mini Drill
6 Magnifying Glass [Link]
CRITERIA CHECKLIST:
7 Soldering Stand
8 Screwdriver
9 Soldering Iron
10. Portable Electric Drill
CRITERIA
Number of Tools Classified Score
1 10 5
2 8-9 4
3 6-7 3
4 4-5 2
5 3-Below 1
SCORING RUBRICS:
SCORE INTERPRETATION OF POINT
SCORE
5 Excellent 10
4 Very Good 9
3 Good 7
2 Fair 5
1- Below Poor 3
V. EVALUATION
MULTIPLE CHOICE: Read the questions carefully and choose the letter of the correct answer.
Write your answer on the Answer Sheet.
1. Which hand tool is used solely for cutting metals?
a. Utility knife b. Saw c. Magnifying Glass d. Paint brush
2. The following tools belong to Splicing tool EXCEPT?
a. Utility knife b. Side cutter c. Long Nose d. Wire Stripper
3. Used to hold, bend and stretch the wire
a. Utility knife b. Saw c. Long nose d. Paint brush
4. What is the reason why threads become stripped?
a. Screws are over tightened c. Screws are heated
b. screws are folded d. screws are painted
5. What is the importance of using Hand tools in Trouble shooting
a. It makes the job easy c. we can achieve the quality of the work
b. To prevent injury d. A and C
TLE-EPAS_Grade10_Q1_LAS2
