Introduc on
Traditionally a typical Block & Bleed System would consist of two Standard Isolation Valves, and a separate
Standard Valve in the Tee Junction for Bleeding the cavity in between. This requires a lot of space and
also requires lot of time for Installation. It also increases the Weight of the overall system of Double Block & Bleed. This
traditional Installation has more number of Leak Paths which eventually affects the Fugitive Emission. Fugitive Emission is
of prime importance to the End User as it directly has an impact on the loss of valuable Media through Leak Paths and also
directly contributes to Air Pollution and Climate change. It has got many other disadvantages which will be avoided with the
installation of HAVI Integral Valves. HAVI DBB with Gate Valve Configuration are widely used in Slurry Applications.
Design Codes & Specifications
ANSI/ASME B16.34/ EEMUA 182/ IS 17292 - DBB Design Standard
ANSI/ASME B16.5 - Flange Dimesions
ASME VIII - Design Procedures Materials
ANSI/ASME B 1.20.1 - NPT Threads
API 607 / BS 6755 / API 6FA / ISO 10497- Fire Test Standards
MSS SP 25 - Marking
FE Class A & B as per ISO 15848 Part 1 & Part 2
API 6D - Testing Code
MESC SPE 77/300 - TAT (Design Validation Testing)
MESC SPE 77/312 Class A & B - Fugitive Emission Test
API 598/ ISO 5208/ EN 12266-1/EN 12266-2 - Valve Testing
MESC SPE 76/210 - Forging Requirements
MESC SPE 77/312 - FET Class A & Class B
MESC SPE 77/100 & 110 for Ball Valves
MESC SPE 77/200 for Cryogenic Services
1
The DBB Advantage
Directly Mounted on the Flange of Piping connection, hence the overall height is reduced
Reduces Weight upto 70% and Cost upto 30%
Reduced Leak paths
Minimum Pressure Drop
Available upto 3" size and 2500 Class
Flange Connections conforming to ANSI B16.5
Anti Blow out Stem Design
Fire Safe Design testing to API 607 & API 6FA
TAT approved as per MESC SPE 77/300
Fugitive Emission Test (FET) as per MESC SPE 77/312 Class A & Class B
Leakage rate of Class V & VI for Metal Seated DBB
Benefits
Reduced Installation Time
Reduced Leak Path
Reduced Weight
Reduced Space
Reduced Cost
HAVI DBB (Ball, Needle Ball &
Tradtional System
Gate, Needle Gate)
HAVI Monoflanges
2
Design Detail
OS&Y Bonnet for Drain
Handle
Thread Rolled Stem
Color Code for Drain Iden fica on
Adjustable Gland Flange
Stem Packings
Yoke Flange
Gate Valve Bonnet
Handle
Stem Nut
Adjustable Gland
Gland
Non Rising Stem Packings
Bonnet Gasket
Thread Rolled Spindle
Lapped Wedge
Lapped Seat
3
Gate DBB Flange x NPTF
Product Design suitable for Slurry Applica ons
15
Features Design Valida on as per IBR 1950
Flange to Thread Connec on
Gate, Needle, Gate Configura on
Reduced Bore Design
OS&Y Bonnet for Drain Valve available
ANSI B16.5 150# to 2500# and API 10,000
Flange x Flange x Flange Op on Available
Raised Face & Ring Type Flanges available
NACE and IGC Material as a Standard
Qualifications
Type Approval Testing as Valve Tes ng as per API 598
per MESC SPE 77/300 100% Factory Tested
Fire Test as per
API 607 / BS 6755
4
Gate DBB Flange x NPTF
Product Design suitable for Slurry Applica ons
15
Features Design Valida on as per IBR 1950
Flange to Thread Connec on
Gate, Needle, Gate Configura on
Reduced Bore Design
OS&Y Bonnet for Drain Valve available
ANSI B16.5 150# to 2500# and API 10,000
Flange x Flange x Flange Op on Available
Raised Face & Ring Type Flanges available
NACE and IGC Material as a Standard
Qualifications
Type Approval Testing as Valve Tes ng as per API 598
per MESC SPE 77/300 100% Factory Tested
Fire Test as per
API 607 / BS 6755
5
Gate DBB Flange x Flange
Product Design suitable for Slurry Services
15
Features Design Valida on as per IBR 1950
Made from Single Piece
Sizes from 1/2" ll 2" (15 to 50DN)
ANSI B16.5 150# to 2500# and API 10,000
Gate, Needle, Gate Configura on
Flange x Flange x Flange Op on Available
4
Raised Face & Ring Type Flanges available
Reduced Bore Design
OS&Y Bonnet for Drain Valve available
Qualifications
Type Approval Testing as Pressure Boundary calcula ons as per ASME VII Div. I
per MESC SPE 77/300 NACE and IGC Material as a Standard
Fire Test as per 100% Factory Teted Valve as per API 598
API 607 / BS 6755
6
Gate DBB Flange x Flange
Product Design suitable for Slurry Services
15
Features Design Valida on as per IBR 1950
Made from Single Piece
Sizes from 1/2" ll 3"
ANSI B16.5 150# to 2500# and API 10,000
Gate, Needle, Gate Configura on
Flange x Flange x Flange Op on Available
4
Raised Face & Ring Type Flanges available
Reduced Bore Design
OS&Y Bonnet for Drain Valve available
Qualifications
Type Approval Testing as Pressure Boundary calcula ons as per ASME VII Div. I
per MESC SPE 77/300 NACE and IGC Material as a Standard
Fire Test as per 100% Factory Teted Valve as per API 598
API 607 / BS 6755
7
Other Product Range
Prefabricated Closed-couple Modular
Hook-ups DBB Hook-up Manifolds
Monoflange Manifold Tube & Pipe
Valves Valves Fi ngs
8
Notes
