Scribd
Upload
2K views1 page

Siemens 828 Basic Parameter

The document discusses the parameter numbers for a Siemens SINUMERIK 828D CNC system, listing common parameter categories and example parameter numbers for axis parameters, spindle parameters, tool compensation, interpolation and motion control, feedrate control, workpiece coordinate system, tool management, coolant and lubrication, I/O and signals, and safety parameters.

Uploaded by

Shinde DhanRaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
2K views1 page

Siemens 828 Basic Parameter

The document discusses the parameter numbers for a Siemens SINUMERIK 828D CNC system, listing common parameter categories and example parameter numbers for axis parameters, spindle parameters, tool compensation, interpolation and motion control, feedrate control, workpiece coordinate system, tool management, coolant and lubrication, I/O and signals, and safety parameters.

Uploaded by

Shinde DhanRaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd

The parameter numbers for a CNC system like the Siemens SINUMERIK 828D can vary

depending on the specific machine configuration, software version, and application.


These parameter numbers are used to access and modify the settings within the CNC
controller. Here are some common parameter categories along with example parameter
numbers:

1. Axis Parameters:

Maximum and Minimum Axis Travel Limits: Parameters 1001 to 1006 (X-axis), 1011 to
1016 (Y-axis), 1021 to 1026 (Z-axis), etc.
Acceleration and Deceleration Rates: Parameters 1101 to 1106 (X-axis), 1111 to 1116
(Y-axis), 1121 to 1126 (Z-axis), etc.
Spindle Parameters:

2. Spindle Speed Ranges and Limits: Parameters 2001 to 2010.


Tool Change Parameters: Parameters 2000 to 2099.
Spindle Orientation Parameters: Parameters 2050 to 2070.
Tool Compensation:

3. Tool Length Offsets: Parameters 3001 to 3010.


Tool Radius Offsets: Parameters 3101 to 3110.
Wear Compensation: Parameters 3201 to 3210.
Interpolation and Motion Control:

4. Interpolation Type: Parameter 5000.


Corner Rounding Parameters: Parameters 5010 to 5020.
Look-Ahead Settings: Parameters 5030 to 5040.
Feedrate Control:

5. Feedrate Override Settings: Parameter 5035.


Rapid Override Settings: Parameter 5036.
Feedrate Smoothing Parameters: Parameters 5050 to 5055.
Workpiece Coordinate System:

6. Workpiece Coordinate Offsets: Parameters 6001 to 6006 (X-axis), 6011 to 6016 (Y-
axis), 6021 to 6026 (Z-axis), etc.
Coordinate System Transformations: Parameters 6050 to 6060.
Fixture Offsets: Parameters 6101 to 6106 (X-axis), 6111 to 6116 (Y-axis), 6121 to
6126 (Z-axis), etc.
Tool Management:

7. Tool Data Management: Parameters 8000 to 8099.


Tool Life Monitoring: Parameters 8100 to 8199.
Tool Wear Compensation Parameters: Parameters 8200 to 8299.
Coolant and Lubrication:

8. Coolant and Lubrication Control Parameters: Parameters 9000 to 9005.


Coolant On/Off Conditions: Parameters 9006 to 9008.
I/O and Signals:

9. Inputs and Outputs Configuration: Parameters 10000 to 10999.


Machine Interface Settings: Parameters 11000 to 11999.
Safety Parameters:

10. Limits for Collision Detection: Parameters 12000 to 12999.


Emergency Stop Behavior: Parameters 13000 to 13010.
Safety Zones and Limits: Parameters 14000 to 14999.

You might also like