Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 1 2014-02-25 �� 11:02:32

 PART2.
Renewable Energy & LED

ED-9710 _NEW & RENEWABLE ENERGY TRAINER

ED-9716_ BASIC ENERGY CONVERSION & ASSEMBLE TRAINER

ED-9717_ NEW & RENEWABLE POWER CONVERSION TRAINER

ED-9720 _ NEW & RENEWABLE ENERGY TRAINER

ED-9732 _ 300W WIND GENERATOR KIT

ED-9740 _ FUEL CELL TRAINER FOR STUDENTS

ED-9741 _FUEL CELL TRAINER FOR LECTURERS

ED-9810 _LED(LIGHT EMITTING DIODE) LAMP TRAINER

ED-9820_LED TRAINER(MODULAR TYPE)

w w w. e d . c o . k r

Part2. ed_english_catalog1_v1.indd 2 2014-02-25 �� 11:02:32

 • New & Renewable Energy

ED-9710 NEW & RENEWABLE ENERGY TRAINER

• Conversion processing experiments on the produced energy(power production / processing)

• Energy efficiency experiments followed by energy production and conversion
• Voltage and current characteristics curve
• Standalone or integrated operation of the energy experiment modules
• Enriched teaching aids such as simulation software for power production

> EXPERIMENTS > CONFIGURATION

• Understanding of the solar cell energy • Basic Module
• Photo electricity simulation » ED-9710-01 Charging Controller Module-I
• Ohm’s Law and voltmeter/ammeter » ED-9710-02 DC/AC Inverter Module-I
• Characteristics of solar cell(Isc, Voc, Im, Vm, Fill Factor) » ED-9710-03 Energy Storage Module
• Light source’s intensity and shadow » ED-9710-04 Central Communication Module
• Basic circuits for charge and Inverter » ED-9710-05 AC Load Module
• Charge using the solar cell » ED-9710-06 DC Load Module
• AC/DC Inverter(sine wave / pseudo sine wave) » ED-9710-07 DC/DC Converter Module-I
• Standalone 12V solar cell system » ED-9710-10 Photovoltaic Module-I
• Optional hybrid experiments(Option: ED-9731 or ED- » ED-9710-71 RS-485 Communication Board(8ea)
9732 model) » ED-9710-73 Multi RS-485 Converte(1ea)
• Integrated System(Option)
» 300W Wind Generator Kit(ED-9732)

ACCESSORIES OPTION

• Experimental Rack : 1490(W) x 918(H) x 320(D)mm

• Cable(Power, Serial, Circuit Connection) : 1set • Work Table
• Monitoring Software CD : 1ea » Dimension : 1490(W) x 846(H) x 800(D)mm
• User Manual : 1ea » Material : MDF, wheel type with drawers

85 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 85 2014-02-25 �� 11:02:33

 • New & Renewable Energy

ED-9710 NEW & RENEWABLE ENERGY TRAINER

Electronics
Embedded

Electricals
> SPECIFICATION

Renewable
energy &
» SOFTWARE

LED
• Checks the voltage/current data per module(text and graph)
• Graph and data storage function
• I-V characteristics curve graph output for PV module

Communication
PC : LabVIEW Monitoring Program

IT/
• Photo electricity simulation
• Basic circuits and voltmeter/
ammeter practices
• Ohm’s Law simulation

Measurement
JAVA photo electricity simulation JAVA Ohm’s Law simulation JAVA basic circuits simulation

Test&
> EXPERIMENT MODULES
» ED-9710-01 Charging Controller Module-I

Automation

Intelligent
Robot/
• Charge Controller
» System Voltage : 12V
» Self Power Consumption : 6~9mA
» Charge Voltage : Floa-13.8V, Absorption- 14.4V/14.4V
» Discharge Blocking Voltage : 11.4V
» Load Reconnecting Voltage : 12.4V
» Temperature Compensation : 20mV

Mechatronics
• Buzzer for Input Polarity
» Operating Voltage : 5~12V

» ED-9710-02 DC/AC Inverter Module-I

• Pseudo Sine Wave Inverter
» Rated Continuous Output : 350W
» Max. Instant Output : 700W
Simulation
Software

» Input Voltage : 10~15VDC

» Output Voltage : 220VAC
» Low Voltage Alarm : 10.5V ±0.5V
• Sine Wave Inverter
» Rated Continuous Output : 200W
» Max. Instant Output : 400W
» Input Voltage : 10~16VDC
» Output Voltage : 220VAC
Pneumatics
Hydraulics

» Low Voltage Alarm : 11.0V ±0.5V,

» High Voltage Isolation : 16.0V ±0.5V
• Buzzer for Input Polarity
» Operating Voltage : 5~12V

www.ed.co.kr 86

Part2. ed_english_catalog1_v1.indd 86 2014-02-25 �� 11:02:33

 • New & Renewable Energy

ED-9710 NEW & RENEWABLE ENERGY TRAINER

> EXPERIMENT MODULES

• MF Battery
» Voltage : 12V
ED-9710-03 » Capacity : 2.0AH
Energy Storage Module • Battery Charger
» Rated Input Voltage : 220V/60Hz/170mA
» Rated Output Voltage : DC 12V
» Rated Output Current : 1.6A
• Buzzer for Input Polarity : Operating Voltage : 5~12V

ED-9710-04 • LED(10ea)
» Operating Voltage : 5V
Central
» Size : o5
Communication » Color : Blue
Module • COM Port(9ea) : I/O Type : RS-485

• Fluorescent Lamp
» Operating Voltage : AC 220V
ED-9710-05 » Rated Input Current : 0.09A
Load Module » Lighting Frequency : 42KHz
» AC Motor
» Operating Voltage : AC 110/220V
» Power Consumption : 3.5W
» Speed : 36rpm
• 220V Power Outlet : Allowable Voltage : 220V/15A

• DC Lamp : Operating Voltage : 3~12VDC

ED-9710-06 • DC Motor
DC Load Module » Operating Voltage : 12V
» Power Consumption : 0.63W
» Speed : 6,100rpm
• Buzzer for Input Polarity : Operating Voltage : 5~12V

• DC/DC Converter
» DC/DC ConverterInput Voltage : 10~36V
ED-9710-07 » Output Voltage : 12V
DC/DC Converter » Output Current : 1.25A
» Output method : single
Module-I
• DC FAN
» Operating Voltage : DC 12V
» Power Consumption : 0.7W
» Type : Ball Bearing
» Variable Resistance : 1KΩ
• Buzzer for Input Polarity : Operating Voltage : 5~12V

87 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 87 2014-02-25 �� 11:02:33

 • New & Renewable Energy

ED-9710 NEW & RENEWABLE ENERGY TRAINER

Electronics
Embedded

Electricals
> EXPERIMENT MODULES
» ED-9710-03 Photovoltaic Module-I

Renewable
• Max. Operating Power : 5W

energy &
• Open Voltage : 20.5V

LED
• Short Circuit : 0.3A
• Operating Voltage : 17.64V
• Operating Current : 0.284A
• General Characteristics
• DC(AC) Voltage Meter, DC(AC) Ampere Meter

Communication
» Voltage : AC 100-240V 50/60Hz
» Power Consumption : 5VA
» Max. Indication Range : -1999 ~ 9999(4 lines)

IT/
» RS-485 Communication Output : 1200/2400/4800/9600bps
» Protocol : Modbus
• Communication Port : No. of Pin: 32pin x 2

Measurement
» ED-9710-71 RS-485 Connector Module

Test&
• Communication Speed : 9600bps
• General Characteristics
» Input Voltage : AC 220V 60Hz

Automation

Intelligent
» ED-9710-73 Multi RS-485 Converter Module

Robot/
• Processor : Atmega128, 8bit RISC
• Memory : 128k Program Flash, 64k SRAM
• Program Downloader : ISP
• Interface : RS-485, RS-232, USB
• 485 Driver Chip : ADM1485

Mechatronics
NEW
> Optional Smart Learning
(Contents-running System)
(Interface Board)

Wire LAN
Simulation

Wireless
Software

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface
Pneumatics

• Smart Learning Contents Interactive with Hardware

Hydraulics

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 88

Part2. ed_english_catalog1_v1.indd 88 2014-02-25 �� 11:02:33

 • New & Renewable Energy

BASIC ENERGY CONVERSION &

ED-9716 ASSEMBLE TRAINER

• Understanding the principal and conception of the generation of electricity for New Renewable energy.
• Experiment of the conversion process for generated energy.
• Understanding the principal and conception of the energy processing regarding generation of electricity energy.
• Division between energy generating module and energy processing module.
• Convenient fixation by one touch lever between each module and working board.
• Control the source of light with using artificial light of sun.
• Experiment and making for the circuit of Electricity power.

> EXPERIMENTS
• Simulation of Photoelectric effect.
• Experiment for voltmeter, ammeter and Ohm’s law.
• Experiment of the characteristic for photovoltaic module.
• Experiment of the angle of incidence and intensity of radiation with using
exterior source of light.
• Experiment of battery charging.
• Experiment of power conversion with using Step-Up Converter Module.
• Experiment of the AC and DC Load.
• Experiment of the characteristic and making the charging circuit.
• Experiment of the characteristic and making the Step-Up circuit.
• Experiment of the characteristic and making the Inverter circuit.

89 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 89 2014-02-25 �� 11:02:33

 • New & Renewable Energy

BASIC ENERGY CONVERSION &

ED-9716

Electronics
Embedded

Electricals
ASSEMBLE TRAINER

> Basic module Configuration

ED-9716-1 CHARGER MODULE

Renewable
energy &
• Module for charging the battery through output of solar cell.

LED
» Protection circuit for overcharge and over discharge.
» Solar cell terminal : input and output of solar cell
» Output terminal : output of battery voltage.
» Battery terminal : terminal for connecting battery.
» Batt Volt Set VR : setting up the overdischarge of battery
» Balt Volt Set VR : setting up the charging voltage of battery.

Communication
» Voltage control : Batt Volt, Batt Low.
» Status Display : LED 2ea.
» Capacitor : 100㎌ / 35V

IT/
» Diode : 1N5822
» OpAmp : LM358
» Relay : 12HE-K

ED-9716-2 Step-Up Converter Module

Measurement
• Module to step-up the output for solar cell or battery as much as common AC voltage.

Test&
» Input terminal : Input and output of charger module
» Output terminal : output of boosted voltage
» Check point: FET Gate Waveform & Oscillation circuit.
» Switch mode Control : TL494
» MOSFET : IRF540
» Transistor : 2N3906
» Capacitor: 150㎌ / 400V
» PhotoCoupler : TLP250

Automation
» Diode : 1N5404

Intelligent
Robot/
U-5060G DC to AC Inverter Circuit
• Module inverter from DC voltage of step up module to AC voltage
» PWM type of Inverter circuit.
» DC input terminal : input and output of step up module.
» AC output terminal : Connecting load for using AC power.

Mechatronics
» REF, VR: Control output and voltage.
» Check Point: check each of waveform.
» Supply +15V, -15Vwith using SMPS module.
» MOSFET : IRF540
» Transformer : CS-197
» PhotoCoupler : TLP250
» Capacitor: 100㎌ / 25V
» PhotoCoupler : TLP250
» Diode : 1N5404
» Gate : CD4011
Simulation
Software

» OpAmp : LM358

U-5060J DC Regulator Circuits

• Module for apprehending the characteristic for voltage and current of solar cell.
» Solar cell connection block : output terminal for solar cell 1 and solar cell 2.
» Curve Tracer block : Check V-I characteristic curve of solar cell into Oscilloscope.
Pneumatics

» LCD Display : Indicating temperature, current, and voltage of Solar Cell.

Hydraulics

» Load block : 0~200Ω, 50W VR.

» PC interface block : after connecting PC, analyzing the data into program.
» Radiation sensor(Option)
› Apprehending the amount of solar radiation.
› Understanding the output of characteristic for solar cell

www.ed.co.kr 90

Part2. ed_english_catalog1_v1.indd 90 2014-02-25 �� 11:02:34

 • New & Renewable Energy

BASIC ENERGY CONVERSION &

ED-9716 ASSEMBLE TRAINER

> Basic module Configuration

ED-9716-5 Dimmer Module ED-9716-6 DC Power Supply Module
• Module for adjusting intensity • Module for supplying power +15V,
of radiation of two 500W -15Vto Inverter circuit
Halogen lamp » Built in 250V/2A Fuse
» Built in 250V/2A Fuse

ED-9716-7 • Connecting between Charger Module and DC12V,7AH

Battery Module Battery
» Built in 250V/3A Fuse

ED-9716-8 » Operation Power : 220V/10W

Lamp Module

ED-9716-9 » Operation power : AC 110V/50~60Hz,10W

AC Motor Module » Indicating the motor operation state with using
troll plate.

ED-9716-10 • Module for making directly charger circuit by Students

Charger Assemble with using bread board.
» Bread board for composing circuit.
Module » Components for using charger circuit.

ED-9716-11 • Module for making directly part of logic of step up circuit

Step-Up Converter by Students with using bread board.
» Bread board for composing circuit.
Assemble Module
» Main circuit of power Stack PCB
» Component for DC-DC step up circuit

91 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 91 2014-02-25 �� 11:02:34

 • New & Renewable Energy

BASIC ENERGY CONVERSION &

ED-9716

Electronics
Embedded

Electricals
ASSEMBLE TRAINER
> Basic module Configuration
ED-9716-12 Single Phase Inverter Assemble Module

Renewable
• Module for making directly part of logic of inverter circuit by Students with using bread board.

energy &
» Bread board for composing circuit.

LED
» Main circuit of power Stack PCB
» Component for circuit of single phase inverter.

Communication
IT/
ED-9716-13 Enhanced Photovoltaic Module
• Azimuth and Angle of inclination.
» Azimuth : Adjusting up to 120° by hand
» Angle of inclination : Adjusting up to 0~90° (per 15° unit)

Measurement
• Artificial source of light
» 500W Halogen lamp : 2ea

Test&
» Control angle with using Joint.
» Control intensity of radiation by dimmer function
• Solar cell module
» Max Output : 10W
» Max Voltage : 17.5V
» Max Current : 0.59A
» Stand Off : 21.5V

Automation

Intelligent
» Short circuit current : 0.69A

Robot/
OPTION ACCESSORIES

Cable : 1set
Size : 1,218W) x 1,533(H) x 720(D)mm

Mechatronics
Circuit components : 1 set
Working board : 1,100(W) x 540(H)mm
English manual
Drawer : 350(W) x 600(H) x 500(D)mm
Monitoring SW

NEW
> Optional Smart Learning
Simulation
Software

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Pneumatics

Middle ware Web server

Hydraulics

USBContents
Any Device Any Computer
Interface

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 92

Part2. ed_english_catalog1_v1.indd 92 2014-02-25 �� 11:02:34

 • New & Renewable Energy

NEW & RENEWABLE POWER

ED-9717 CONVERSION TRAINER

• Compose the circuit module for using power conversion ( Diode Rectification, Single phase control,
three phase control, single phase current, three phase control, three phase inverter, single cycloconverter,
stand alone converter, MPPT type direct current, PWM single converter)
• Compose driver circuit, gate circuit, transformer for each experiment board and circuit device for users
to replace.
• Compose input terminal for external signal or VR for adjusting gate single in circuit.

> EXPERIMENTS
• Experiment half-wave and wave rectification for using diode.
• Experiment for single and three phase control. ACCESSORIES
• Experiment for single and three phase alternating current power control
• Experiment for squirrel cage motor load and load resistance • Cable : 1 set
• Experiment the role of P converter and N converter. • User Manual
• Experiment the stand alone inverter control and direct current control

> EXPERIMENT MODULES

ED-9717-1 Diode Rectification Board

• AC Voltmeter 50V, 1.5 Class : 2EA

• DC Voltmeter 50V, 1.5Class : 2EA
• DC Ammeter 3A, 1.5 Class : 2EA
• Graphics SCR Module Device (500V, 4A) : 5EA
• Diode Device(600V, 5A) : 2EA
• Graphics gate module (A type, VR) : Type 2
• Graphics Resistance / Reactance load (3 STEP) : Type 1
• Direct Current motor load(DC90V, 30W) : 1EA
• Speed meter and sensor ( Photo interrupt type) : 1 SET

93 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 93 2014-02-25 �� 11:02:35

 • New & Renewable Energy

NEW & RENEWABLE POWER

ED-9717

Electronics
Embedded

Electricals
CONVERSION TRAINER

> EXPERIMENT MODULES

ED-9717-2 Single Phase Control Board
• AC Voltmeter 50V, 1.5 Class : 2EA

Renewable
energy &
• DC Voltmeter 50V, 1.5Class : 2EA

LED
• DC Ammeter 3A, 1.5 Class : 2EA
• Graphics SCR Module Device (500V, 4A) : 5EA
• Diode Device(600V, 5A) : 2EA
• Graphics gate module (A type, VR) : Type 2
• Graphics Resistance / Reactance load (3 STEP) : Type 1

Communication
• Direct Current motor load(DC90V, 30W) : 1EA
• Speed meter and sensor ( Photo interrupt type) : 1 SET

IT/
ED-9717-3 Three Phase Control Board
• AC Voltmeter 100V, 1.5 Class : 1EA
• DC Voltmeter 100V, 1.5Class : 1EA
• DC Ammeter 3A, 1.5 Class : 1EA
• Graphics SCR Module Device (500V, 4A) : 6EA

Measurement
• Graphics gate module (E type, VR) : Type 1
• Graphics Resistance / Reactance load (3 STEP) : Type 1

Test&
• Direct Current motor load(DC 90V, 30W) : 1EA
• Speed meter and sensor ( Photo interrupt type) : 1 SET

ED-9717-4 Single Phase AC Control Board

• AC Voltmeter 100V, 1.5 Class : 4EA

Automation

Intelligent
• AC Ammeter 3A, 1.5 Class : 2EA

Robot/
• Graphics SCR Module (500V, 4A) : 3EA
• Diode Device(600V, 5A) : 1EA
• Graphics gate module (A type, VR) : Type 2
• Graphics Resistance / Reactance load (3 STEP) : Type 1
• Induction motor load (110V, 25W) : 1 EA
• Speed meter and sensor ( Photo interrupt type) : 1 SET

Mechatronics
ED-9717-5 Three Phase AC Control Board
• AC Voltmeter 150V, 1.5 Class : 2EA
• AC Ammeter 3A, 1.5 Class : 1EA
• Graphics SCR Module (500V, 4A) : 6EA
• Graphics gate module (E type, VR) : Type 1
• Graphics Lamp load : 3 EA
• Induction motor load (220V, 25W) : 1 EA
Simulation
Software

• Speed meter and sensor ( Photo interrupt type) : 1 SET

ED-9717-6 Three Phase Inverter Board

• AC Voltmeter 100V, 1.5 Class : 1EA
• AC Ammeter 5A, 1.5Class : 1EA
Pneumatics
Hydraulics

• DC Voltmeter 50V, 1.5Class : 1EA

• DC Ammeter 5A, 1.5 Class : 1EA
• Graphics SCR Module (500V, 4A) : 6EA
• Capacitance 10㎌, 250V : 6EA
• Graphics Resistance load (3 STEP) : Type 1
• Induction motor load (220V, 25W) : 1 EA

www.ed.co.kr 94

Part2. ed_english_catalog1_v1.indd 94 2014-02-25 �� 11:02:37

 • New & Renewable Energy

NEW & RENEWABLE POWER

ED-9717 CONVERSION TRAINER

> EXPERIMENT MODULES

• AC Voltmeter 100V, 1.5 Class : 2EA

ED-9717-7 • Graphics SCR Module (500V, 4A) : 8EA
Single Phase Cycle • Graphics gate module (D type, VR) : Type 1
Board • Graphics Resistance load (3 STEP) : Type 1
• Induction motor load (110V, 25W) : 1 EA
• Speed meter and sensor ( Photo interrupt type) : 1 SET

• Storage Battery (DC 12V, 7Ah)

ED-9717-8 • DC-DC Converter (DC 12V input, AC 220V output)
Stand Alone Inverter • Inverter (Pure Sine Wave type, Overload range : 20W)
• Graphics gate module (F type, VR) : Type 1
Board

• DC Voltmeter 100V, 1.5 Class : 1EA

• DC Voltmeter 50V, 1.5 Class : 1EA
ED-9717-9 • DC Ammeter 3A, 1.5 Class : 1EA
MPPT Type Power • Graphic Power TR module(150V, 10A) ; 2EA.
• Graphics Diode Module (600V, 5A) : 2EA
Control Board • Chopper reactor fault current : 2EA
• Graphics Resistance load (3 STEP) : Type 1
• Direct Current motor load DC 90V, 30W : 1EA
• Graphics gate module (B type, VR) : Type 1
• Graphics Drive circuit Module (A type) : Type 2
• Speed meter and sensor ( Photo interrupt type) : 1 SET

• DC Voltmeter 100V, 1.5 Class : 1EA

• AC Voltmeter 100V, 1.5 Class : 1EA
ED-9717-10 • Graphic FET module(200V, 20A) ; 4EA.
PWM Single Phase • Diode Module (600V, 5A) : 4EA
Inverter Board • Graphics Resistance load (3 STEP) : Type 1
• Induction motor load 110V, 25W : 1EA
• Graphics gate module (A type, VR) : Type 1
• Graphics Drive circuit Module (F type, FET) : Type 4
• Speed meter and sensor ( Photo interrupt type) : 1 SET

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

95 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 95 2014-02-25 �� 11:02:39

 • New & Renewable Energy

ED-9720 NEW & RENEWABLE ENERGY TRAINER

Electronics
Embedded

Electricals
• Conversion experiments on the produced energy(power production/processing)
• Characteristics of Solar Cell module’s voltage and current
• Alarm beep for wrong wire placement
• Voltmeter and ammeter as included for measuring AC and DC
• Control by PC and waveform and graph output

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> SPECIFICATION
> EXPERIMENTS

Mechatronics
• Understanding of the solar cell energy » SOFTWARE
• Photo electricity simulation Data Monitoring DC Module
AC(Inverter) Module
• Ohm’s Law and voltmeter/ammeter
• Characteristics of solar cell(Isc, Voc)
• Light source’s intensity and shadow
• Charge using the solar cell
• AC/DC Inverter
• Standalone-type 12V solar cell system
Simulation
Software

> CONFIGURATION
• Basic Module
» Energy Production Module(in upper body)
› Solar Cell Panel
› Rheostat, Reflection Panel • Simulation Software
» Energy Processing Module(in lower body) » Photo electricity simulation followed by the voltage impressed
› AC/DC Inverter onto a metal plate
› Charge Controller » Photo electricity simulation followed by the types of
Pneumatics

a metal plate
Hydraulics

› Battery
› AC/DC Tester » Photo electricity simulation followed by the light’s wavelength
» Communication Module » Basic circuit configuration
» Understanding of the current flow
› Multi RS-485 Converter
» Simulation for the measured voltmeter/ammeter
› RS-485 Communication Board
» Simulation by controlling voltage/current values
• Integrated System(Option) » Simulation followed by the changes in voltage, current and
» 300W Wind Generator Trainer(ED-9732) resistance values

www.ed.co.kr 96

Part2. ed_english_catalog1_v1.indd 96 2014-02-25 �� 11:02:39

 • New & Renewable Energy

ED-9720 NEW & RENEWABLE ENERGY TRAINER

> SPECIFICATION
• Solar Cell(Energy Production Part) • AC Load
» Serial/parallel wiring » Fluorescent Lamp
» Max. Operating Power : 5W › Operating Voltage : 220VAC
» Open Voltage : 20.5V › Rated Input Current : 0.09A
» Short Current : 0.3A › Lighting Frequency : 42KHz
» Operating Voltage : 17.64V » 220V Power Outlet
» Operating Current : 0.284A › Allowable Voltage : 220V/15A
» Dimmer Switch : 1KW
» Halogen Lamp : 150W • DC Load
» DC Motor
› Operating Voltage : 12V,
• Charge Controller
› Power Consumption : 0.63W
» System Voltage : 12V › Speed : 6,100rpm
» Max. Charge Current : 10A/15A/20A » DC Lamp
» Max. Load Current : 10A/15A/20A › Operating Voltage : 3~12VDC
» Self Power Consumption : 6~9mA
» Charge Voltage(Float) : 13.8V • DC Voltage Meter, DC Ampere Meter
» Discharge Blocking Voltage : 11.4V » Voltage : 100~240VAC 50/60Hz
» Load Reconnecting Voltage : 12.4V » Power Consumption : 5VA
» Temperature Compensation : 20mV » Max. Indication Range : -1999~9999(4행)
» RS-485 Communication Output :
• AC/DC Inverter 1200/2400/4800/9600bps
» Rated Continuous Output : 350W
» Max. Instant Output : 700W • Multi RS-485 Converter(ED-9710-73)
» Input Voltage : 10~15VDC » Processor : Atmega128, 8bit RISC
» Output Voltage : 220VAC » Memory : 128k Program Flash, 64k SRAM
» Low Voltage Alarm : 10.5V ±0.5V » Program Downloader : ISP
» Interface : RS-485, RS-232, USB
• Energy Storage Module » 485 Driver Chip : ADM1485
» Power : 5V
» MF Battery
› Voltage : 12V
• RS-485 Connector(ED-9710-71)
› Capacity : 2.0AH » Communication Speed : 9600bps
» Battery Charger » Interface : RS-485
› Rated Input Voltage : 220V/60Hz » No. of Pin : 32pin x 2,
› Rated Input Current : 170mA » High brightness Chip LED
› Rated Output Voltage : 12VDC » Operating Voltage : 3V
› Rated Output Current : 1.6A » Color : Yellow, Red

• Buzzer for Input Polarity » GENRAL CHARACTERISTICS

» Operating Voltage : 5~12V • Input Voltage : AC 220V 60Hz
» Function : Alarm for wrong wire placement • System Dimension : 620(W) x 380(H) x 200(D)mm

• AC Voltage Meter(2ea), AC Ampere Meter(2ea)

» Voltage : 100~240VAC 50/60Hz ACCESSORIES
» Power Consumption : 5VA
» Max. Indication Range : -1999~9999(4 lines)
• Cable(Power, Serial, Circuit Connection) : 1set
» RA-485 Communication Output : 1200/2400/4800/9600bps
» Protocol : Modbus • User Manual : 1ea

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface

97 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 97 2014-02-25 �� 11:02:39

 • New & Renewable Energy

ED-9732 300W WIND GENERATOR KIT

Electronics
Embedded

Electricals
• 6 rotational wings as mounted
• Inverse current protection
• Built-in charge controller and bulit-in battery
• Overcurrent/electric discharge protection

Renewable
• 360˚ rotation by the direction of wind

energy &
• Configurable composite structure by adding optional modules in energy production such as solar cell

LED
and fuel cell
• Energy processing experiments in liasion with ED-9710 or ED-9720 model

> EXPERIMENTS

Communication
• Standalone Use
» Principle of wind power generation(simulation)

IT/
• In liaison with ED-9710 or ED-9720
» Wind generation characteristics by the load
» Wind generation characteristics by the wind speed
» Battery charge and inverse voltage protection
» Composite configuration with solar cell modules
» Interlocking experiment on Power Processing/
Conversion Module

Measurement
» Monitoring on AC to DC conversion

Test&
> SPECIFICATION
• Generator
» Max. Operating Power : 300W
» Propeller : 6 wings
» Rated Output : 100w(10m/s)
» Starting Wind Speed : 2 m/s

Automation

Intelligent
» Output Voltage : 12 V

Robot/
» Rotational Diameter : 90.3 cm
» Turbine’s Weight : 4.5kg
• Charging Controller
» Regulating cut-in Voltage : 13.8V
» Maximum charge Voltage : 14.4V(±2%)
» GENRAL CHARACTERISTICS
• Dimension
» Wing’s diameter : 903mm

Mechatronics
» 680Body’s length : 608mm

ACCESSORIES
• Cable(Power, Serial, Circuit Connection) : 1set
• User Manual : 1ea
Simulation
Software

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth
Pneumatics
Hydraulics

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 98

Part2. ed_english_catalog1_v1.indd 98 2014-02-25 �� 11:02:39

 • New & Renewable Energy

ED-9740 FUEL CELL TRAINER (CASE TYPE)

• Understand the conception and principal of fuel cell generation

• Fuel cell generation using photovoltaic
• Complete disassembly and assembly of the fuel cell
• Current and voltage measurement for PEM Fuel Cell Stack according to each of Cell
• Power production experiment using PEM Fuel cell
• Modularized of the processes covering electrical dissolution of water and drive of fuel cell
• Experiment on various types of load
• PEMFC(Hydrogen) generation experiment
• Testing of load for maximum four fuel cell at the same time
• Monitoring through LabVIEW program

> EXPERIMENTS > CONFIGURATION

• Experiment on Photovoltaic Generation • Solar Module : 1ea
» Solar cell generation experiment according to luminance • Halogen Lamp : 1ea
» Solar cell generation experiment according to angle
• Dimmer : 1ea
» Experiment on characteristic curve solar cell IV
» Experiment (Motor, Lamp, Registor) according to solar cell Load • Solar H2/Air PEMFC Stack(PEM Fuel Cellx10)
» 1ea
• Experiment on Fuel Cell Generation • PEM Fuel Cell
» Understand the conception and principal of fuel cell generation
» Hydrogen electrical dissolution experiment » 2 ea(Serial and parallel experiment)
» Experiment the principal for Hydrogen Generation • H2/Air Electrolyzer : 1ea
» Experiment characteristic Load of PEMFC Cell (Motor, Lamp,Registor) • Adjust Resistor / Electric Load Meter : 1ea
» Experiment characteristic Load of PEMFC Stack (Motor, Lamp,Registor)
• LED Lamp Load : 1ea
» Experiment changed power which is created from each of cell
» PEMFC cell serial and parallel experiment • Motor Load : 1ea
» Experiment on characteristic curve IV of PEMFC Stack • Insolation Meter : 1ea
» Experiment on disassembly and assembly of PEMFC Cell • Infrared Thermometer : 1ea

99 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 99 2014-02-25 �� 11:02:40

 • New & Renewable Energy

ED-9740 FUEL CELL TRAINER (CASE TYPE)

Electronics
Embedded

Electricals
> SPECIFICATION
• Solar Cell • Monitoring system Adjust Resistor

Renewable
» Max Operation Power : 10W » Allowable Voltage : DC 0V~30V

energy &
» Open Voltage : 21.8V » Allowable Current : 10~50W, 1A~5A

LED
» Short Current : 0.64A » Load Type : Analog Type
» Operation Voltage : 17.6V » Load Error : 1.2%
» Operation Current : 0.64A
» Size : 310(W) x 18(H) x 368(D)mm » Variable Resistance : 3.4~300Ω
» Weight : 1.5kg
• Halogen Lamp : Power 220V/300W • Electric Voltage /Ampere Meter
» Power Voltage : AC 100~240 50/60Hz

Communication
• Dimmer » Power Consumption : 5VA
» Using Voltage : AC220V
» Rated Capacity : 1kW » Max Range : -1999~9999

IT/
» Noise Terminals Voltage : below 7dB 45MHz~30MHz » RS-485 Comm Output : 1200/2400/4800/9600bps
» T Shape Dimension : 80(W) x 60(H) x 120(D)mm » Protocol : Modbus
» Communication Method : Half-DUP Lex
• H2/Air Electrolyzer » Communication with PC : USB
» Power : 15W at 4DC
» Allowable Voltage : 3.0~4.0V DC
» Allowable Current : 0~4.0A DC
» GENRAL CHARACTERISTICS
• Power : 10W

Measurement
» Electrolyzer Area : 16㎠
» Dimension : 180(W) x 140(H) x 120(D)mm • Weight : 1.5kg

Test&
» Weight : 460g • Dimension : 658(W) x 245(H) x 447(D)mm
• H2/Air PEMFC Stack(Fuel Cell x 10) » SOFTWARE
» Power : 200mW per cell
» Power(10cells) : 2W
» Dimension : 175(W) x 60(H) x 70(D)mm
» Electrode area : 4㎠ per cell
» Fuel : H2/Air

Automation
» Weight : 430g

Intelligent
» Generated Voltage : 0.4~0.96 per cell

Robot/
• PEM Fuel Cell Master KIT
» Power : 0.3~0.4W • Monitoring on basic of text & monitoring current and
» Size : 30 x 30mm, Fuel : H2/Air voltage graphic which is created from solar and full cell
• Save testing accumulated data, and possible printing
• Motor Pan(Load) • Function to output the characteristic curve for current
» Operating Range : 1~6V and voltage
» Nominal : 3.0V • I-V graphic curve function

Mechatronics
» No Load Speed : 3100rpm
» Dimension : 60(W) x 140(H) x 40(D)mm
» Weight : 45g
• LED Lamp(Load) ACCESSORIES
» LED Lamp(Load)Power : 0.8W
» Allowable Voltage : 5V • Cable (Power, USB, Circuit Connection) : 1set
» Allowable Current : 0.15A • User Manual : 1ea
» LED : Per 15mA(8ea) • Program CD : 1ea
» Dimension : 60(W) x 140(H) x 40(D)mm
Simulation
Software

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C
Pneumatics
Hydraulics

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.
www.ed.co.kr 100

Part2. ed_english_catalog1_v1.indd 100 2014-02-25 �� 11:02:40

 • New & Renewable Energy

ED-9741 FUEL CELL TRAINER (MODULE TYPE)

• Understand the conception and principal of fuel cell generation

• Fuel cell generation using photovoltaic
• Complete disassembly and assembly of the fuel cell
• Current and voltage measurement for PEM Fuel Cell Stack according to each of Cell
• Power production experiment using PEM Fuel cell
• Modularized of the processes covering electrical dissolution of water and drive of fuel cell
• Experiment on various types of load
• PEMFC(Hydrogen) generation experiment
• Testing of load for maximum four fuel cell at the same time
• Removable type of electrical dissolution and fuel cell from main body
• Monitoring through LabVIEW program

> EXPERIMENTS
• Experiment on Photovoltaic Generation
» Solar cell generation experiment according
to luminance
» Solar cell generation experiment according
to angle
» Experiment on characteristic curve solar
cell IV
» Experiment (Motor, Lamp, Registor)
according to solarcell load

• Experiment on Fuel Cell Generation

» Understand the conception and principal of
fuel cell generation
» Hydrogen electrical dissolution experiment
» Experiment the principal for Hydrogen Generation
» Experiment characteristic Load of PEMFC Cell
(Motor, Lamp, Registor)
» Experiment characteristic Load of PEMFC Stack
(Motor, Lamp, Registor)
» Experiment changed power which is created from
each of cell
» PEMFC cell serial and parallel experiment
» Experiment on characteristic curve IV of PEMFC
Stack
» Experiment on disassembly and assembly of
PEMFC Cell

CONFIGURATION

• ED-9741-1 Photovoltaic Module -I • Insolation Meter : 1ea • Infrared Thermometer : 1ea

• ED-9741-2 PEMFC Fuel Cell -I

101 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 101 2014-02-25 �� 11:02:40

 • New & Renewable Energy

ED-9741 FUEL CELL TRAINER (MODULE TYPE)

Electronics
Embedded

Electricals
> SPECIFICATION

» ED-9741-1 PHOTOVOLTAIC MODULE-I » SOFTWARE

• Solar Cell

Renewable
» Power : 10W

energy &
» Size & Weight: 310(W) x 18(H) x 368(D)mm & 1.5kg

LED
• Halogen Ramp
» Power : 220V/300W
• Dimmer
» Using Voltage : AC220V
» Rated Capacity : 1kW
» Noise Terminals Voltage : below 7dB 45MHz~30MHz • Monitoring on basic of text & monitoring current and

Communication
» T Shape Dimension : 80(W) x 60(H) x 120(D)mm voltage graphic which is created from solar and full
• H2/Air Electrolyzer
cell

IT/
» ED-9741-2 PEMFC FUEL CELL-I • Save testing accumulated data, and possible
» Power : 15W printing
» Dimension & Weight : 180(W)x140(H)x120(D)mm &460g • Function to output the characteristic curve for
• Solar H2/Air PEMFC Stack(Fuel Cell x 10) current and voltage
» Power : 200mW per Cell • I-V graphic curve function
» Power(10cells) : 2W
» Fuel : H2/Air

Measurement
• PEM Fuel Cell Master KIT

Test&
» Power : 0.3~0.4W
» Size : 30 x 30mm
» Fuel : H2/Air ACCESSORIES
• Adjust Resistor
» Allowable Voltage : DC 0V~40V • ED-9710-71 RS-485 Connector Module : 2ea
» Allowable Current : 1A~5A • E9710-73 Multi RS-485 Converter : 1ea
» Load Type : Analog Type • Cable (Power, Serial, USB, Circuit Connection) : 1set
» Load Error : ± 1.2%
• User Manual : 1ea

Automation

Intelligent
» Variable Resistance : 3.4~300Ω
• SW CD : 1ea

Robot/
• Motor Pan : Power 10mW
• LED Lamp
» LED : 8ea
» LED Color : Red, Blue, Green
• DC Voltage Meter / DC Ampere Meter(2ea)
» Power Voltage : AC 100~240 50/60Hz OPTION
» Power Consumption : 5VA
» Max Range : -1999 ~ 9999 • ED-9710-70 ZigBee Mote Module : 1ea

Mechatronics
» RS-485 Com Output : 4800/9600bps • ED-9710-71 RS-485 Connector Module : 2ea
» Communication Method : Half-DUP Lex
• ED-ZigM ZigBee Codi Module : 1ea
» GENRAL CHARACTERISTICS • ED-3121 Ubiquitous Monitoring System : 1ea
• Input Voltage : AC 220V / 60Hz
• Dimension : 595(W) x 1,437(H) x 560(D)mm

> Optional Smart Learning NEW

Simulation
Software

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth
Pneumatics
Hydraulics

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 102

Part2. ed_english_catalog1_v1.indd 102 2014-02-25 �� 11:02:40

 • LED Control

ED-9810 LED(Light Emitting Diode) LAMP TRAINER

• Practice basic method how to operate such as basic operation, Constant voltage, Constant current, serial
connection, and parallel connection
• Brightness control, Color control, and lighting
• Simulation for Steady/PWM
• Brightness control for AC LED
• Digital and analogue VLC
• Monitoring control operation data and basic circuit data
• Control and monitoring using PC(LabVIEW) and Embedded GUI

> EXPERIMENTS > CONFIGURATION

• LED Basic operation experiment
(Constant voltage,Constant
current, serial connection, and AC LAMP
parallel connection)
• LED Brightness control, Color
control and lighting experiment EMBEDED
EMBEDDED
• LED control program practice
• Webbench Simulation
• Experiment LED operation using AC CONTROL 1

Dimming
• Experiment VLC(Visual Light CONTROL 2
Communication)
• LED control using PC LabVIEW
program VLC
CONTROL 3
• LED control using Web server
• LED control using Embedded GU

103 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 103 2014-02-25 �� 11:02:41

 • LED Control

ED-9810 LED(Light Emitting Diode) LAMP TRAINER

Electronics
Embedded

Electricals
> SPECIFICATION
» EMBEDDED BOARD » Display
• H/W › 12V, 5V Supply
» CPU : PXA270(520MHz) › Character LCD 8 x 2 Line
» FLASH : 32MByte › Atmega 128 MCU
» SDRAM : 128MByte(32bits Access)

Renewable
› USB B type x 1(PC to Mega128 Serial Com)

energy &
» SRAM : 1MByte(32bits Access)
• S/W

LED
» TFT LCD : Touch Pad(7inch), 16bits, 800 x 480
» Ethernet : 10Mbps Ethernet(CS8900A)-1Port » Application
» Serial Port : FF, ST, BT UART › LED Lamp Control Application(LabVIEW, WEB)
» USB 1.1 : Bluetooth UART-1Port(VLC use)
» Touch : Host(SL811HST), Client ADS7846 » SOFTWARE
» Slot : MMC/SD-1 Slot
• QT Program(Embedded GUI)
» Stereo I/O : Cirrus CS4202

Communication
» VLC I/O : 24Pin x 2 Connector
» Multi-ICE : Multi-ICE 20Pin Connector
» JTAG : PC Interface 10Pin Connector

IT/
• OS
» Kernel : Linux 2.6.17, Bootloader : u-boot-1.1.4,
File system : Ramdisk, jffs2
• S/W
» Device Driver, 7”TFT LCD, UART 3Port, FF/ST/BT,
Jffs2 Device Driver, CS8900 Ethernet, MMC/SD, Main Screen Color Control Screen
USB Host, USB Client, AC’97 CODEC,
» Application : LED Lamp Control Application

Measurement
» EMBEDDED BOARD

Test&
• H/W
» Basic Circuit
› 12V, 5V Supply, Red LED x 13(5V), Green LED x 3(5V),
Blue LED x 3(5V), Selector x 1(3pole 4position), 1K VR x 2
» Control 1
› 12V, 5V Supply, Full Color LED x 16(5V), VLC Screen
Character LCD 8 x 2 Line, Atmega 128 MCU,
Tack SW x 5(for using control) • LabVIEW Program(PC GUI)

Automation
» Control 2

Intelligent
Robot/
› 12V, 5V Supply
› Full Color LED x 9(5V)
› Character LCD 8 x 2 Line
› Atmega 128 MCU
› Tack SW x 5(for using control)
» Webbench
› 12V, 5V Supply, White LED x 2(Steady, PWM Control)
» AC LED
› 220V, 12V Supply » GENERAL CHARACTERISTICS

Mechatronics
› M-AC LED x 1(110V~220V)
› 10K VR(Dimming Control) • Dimension : 690(W) x 180(H) x 420(D)mm
» VLC
› 12V, 5V Supply
› Digital & Analog VLC Support ACCESSORIES
› ATmega8 x 2(RX parts, TX parts)
› 3.5pi Audio Jack(IN) • Cable (Power, Serial, Printer, USB, AVR ISP, ARM JTAG,
› TX : Red LED x 8 UTP Corss) : 1set
› RX : FND(Digital), Speaker(Analog) • User Manual : 1ea • Program CD : 1ea
Simulation
Software

NEW
> Optional Smart Learning
(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C
Pneumatics

Bluetooth
Hydraulics

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 104

Part2. ed_english_catalog1_v1.indd 104 2014-02-25 �� 11:02:41

 • LED Control

ED-9820 LED TRAINER (MODULAR TYPE)

• Learning how to drive LED through Basic Theory and Various Practices for LED
• Visible Ray Communication Practices by use of LED
• Brightness/Color Control and Output waveform Measurement Experiment about LED
• Understanding the communication between ZigBee-mounted Module and Main Monitoring System

> EXPERIMENTS > CONFIGURATION

• Voltage and Current Measurement according to the kinds of LED • ED-9820-1 Incandescent & LED Light
• Brightness Control and Output Waveform Measurement • ED-9820-2 Dimmer
• System Integration by use of LEDs and Sensors • ED-9820-3 LED Sensor Light
• Color Control and Output Waveform Measurement • ED-9820-4 Light Control
• Monitoring Practice by Embedded System • ED-9820-5 Visual Light Communication
• ED-3121 Ubiquitous Monitoring System

> SPECIFICATION
• Input Power: AC 220V/50Hz

ACCESSORIES OPTION
• Rack : 1490(W) x 918(H) x 320(D) mm • Table
• Cable : 1Set (Power, Communication etc) - Dimension: 1490(W) x 846(H) x 800(D)mm
• User’s Manual : 1 Book - Material : MDF, Lockable Drawers
• Software CD : 1 EA - Easy-to-Move Wheel

105 Part2 Renewable Energy & LED

Part2. ed_english_catalog1_v1.indd 105 2014-02-25 �� 11:02:41

 • LED Control

ED-9820 LED TRAINER (MODULAR TYPE)

Electronics
Embedded

Electricals
> SPECIFICATION
» SOFTWARE
• QT Program(Embedded GUI) • LabVIEW Program(PC GUI)

Renewable
energy &
LED
Communication
Main Screen Color Control Screen VLC Screen

IT/
> Experiments Module
ED-9820-1 ED-9820-2 Dimmer
Incandescent & LED Light • AC, DC Rheostat

Measurement
• Incandescent Light : AC220V, 25W • AC Voltage/Ampere Meter
• DC Voltage/Ampere Meter

Test&
• LED Lamp : AC100 ~ 240V, 20W
• AC Voltage Meter, AC Ampere Meter • ZigBee : Node
• ZigBee : Node

ED-9820-3 ED-9820-4 Light Control

LED Sensor Light • Full Color LED : 5x5 lines, 5V
• ATmega128 MCU

Automation
• Touch-Sensor Lamp : DC12V, 7-Color LED

Intelligent
• CdS-Sensor Lamp : AC220V, 1.2W • Red/Green/Blue Control

Robot/
• Motion-Sensor Lamp : AC220V, 5.5W, • ZigBee : Node
Operation Range 5m ,Operation Time 5sec
• Vibration-Sensor Lamp : DC3V

ED-9820-5 Visible Light ED-3121 Ubiquitous

Communication Monitoring System

Mechatronics
• Analog VLC supported, • Embedded Board
Communication Range Adjustment » PXA270 Core
• Stereo Audio Jack 3.5ø » 7-inch Touch TFT LCD (800x480)
• Tx : Red Color LED 4EA » Ethernet Port (CS8900-10M)
• Rx : Speaker 8Ω » RS-232C Port
» Built-in Monitoring Program (QT App)
» Buit-in Web Server(Go Ahead Web
Server)
• ZigBee Connector (32 Pin x 2)
Simulation
Software

NEW
> Optional Smart Learning
(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB
Pneumatics

(iOS,OSX) (Android) (MS Windows)

Hydraulics

Middle ware Web server

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 106

Part2. ed_english_catalog1_v1.indd 106 2014-02-25 �� 11:02:42