MPQ1000
Handheld Power Quality Analyzer
MPQ1000
Handheld Power Quality Analyzer
■■ Automatic CT recognition
■■ Automatic connection verification
■■ On-board data analysis
■■ SD card and USB stick support
■■ 1000 V ac and 1000 V dc range
■■ Scope and DMM modes
■■ CATIV @ 600 V
■■ IEC61000-4-30 Class A compliant
DESCRIPTION FEATURES AND BENEFITS
The Megger MPQ1000 Power Quality Analyzer is an advanced ■■ Automatic CT recognition means never having the unit programmed
handheld 3-phase analyzer. It is a highly intuitive analyzer that delivers for an incorrect range.
unmatched capability in a smart ergonomic platform. View RMS
■■ CTs are powered by the unit so there is no need for additional
data, waveforms, demand data, phase angles, harmonics, unbalance,
connections.
flicker and more in real time with the MPQ1000 scope mode and
DVM mode. When data needs to be recorded the MPQ1000 record ■■ Connection verification ensures the unit is configured correctly and
verification will automatically identify the current clamps, recognize you get the data you need — no wasted recordings.
their range and verify the unit is connected properly. Simply connect
■■ On-board data analysis saves time by allowing an immediate
it and push the record button. The MPQ1000 can record for extended
examination of data before leaving the site.
periods of time because of its massive memory. It utilizes an SD card,
which makes expanding the memory as easy as installing a new SD ■■ Multiple communication methods (USB, Ethernet, USB stick or SD
card. The recorded data can be viewed on the MPQ1000 color VGA card) allow for flexible and convenient operation.
display or the data can be transferred to the high power Megger PQ
■■ Removable SD card allows for large recording capabilities and simple
Power Quality Analysis software via USB cable, USB stick, Ethernet or
memory expansion.
directly from the SD card.
■■ The expanded 1000 V ac range allows for more application; no
need for a second unit.
MEASURED PARAMETERS
■■ RMS voltage / current ■■ Total harmonic distortion ■■ 1000 V dc measurement allows testing and analysis of renewable
applications dismissing the need for additional equipment.
■■ DC voltage ■■ Total demand distortion
■■ DC current (requires dc CT) ■■ Harmonics ■■ CATIV @ 600 V assures a safe unit for all applications.
■■ Phase-to-phase voltage ■■ Inter-harmonics ■■ Full-featured Class A compliant (all parameters) ensures the
■■ Power parameters ■■ Energy parameters recording of correct values.
(KW, KVAR, KVA, DPF, TPF) (KWH, KVARH, KVAH) ■■ Smart configuration in the Megger PQ software for quick and easy
■■ Voltage sag/dips and swells ■■ Mains signaling setup.
■■ Phase angles ■■ Harmonic direction ■■ Phase angle stability measurement lets you easily find tricky phasing
■■ Current sags/dips and swells ■■ IEC flicker problems caused by multiple erratic sources.
■■ Transient down to 1 msec ■■ Rapid voltage change ■■ Timed waveform capture allows for the taking of PQ events and
■■ IEC unbalance ■■ Phase angle deviation periodic waveforms at the same time.
■■ Frequency ■■ ANSII unbalance ■■ Easy intuitive menus allow for simple navigation and operation.
■■ Event waveform capture ■■ Timed waveform capture
■■ Free software included means no license or dongle required.
MPQ1000
Handheld Power Quality Analyzer
APPLICATIONS Compliance
Safety/EMC/Vibration IEC61000-4-30
Using experience gained from supplying a multitude of analyzers to
IEC61000-4-15 IEC61000-4-27
a large number of utilities, industries and service providers, Megger
IEC61010-1 IEC61326
has designed the most versatile unit available today. Some of the
IEC60529 MIL-STD-810-G
applications include the following:
IEEE1453 CAN/CSA-C22.2 No. 1010.1-92
■■ Compliance testing to any PQ standard RoHS2 Directive 2011/65/EU
■■ Power factor studies
Dimensions
■■ Load studies and load balancing
175 mm x 250 mm x 60 mm (6.89 in. x 9.85 in. x 2.36 in.)
■■ Billing verification
■■ Substation monitoring Weight
Standard unit: 1.82 kg (4 lbs)
■■ Capacitor bank sizing
■■ Transformer analysis and de-rating Voltage Channels
■■ Motor troubleshooting and inrush testing 4 voltage channels
Voltage range: 0 to 1000 V AC / 0 – 1000 V DC
■■ Switchgear and component failure
Voltage accuracy: 0.1% of reading
■■ Tripping breakers Resolution: 16 bit
■■ Equipment tripping offline Crest factor: 1.5
■■ Dimming/surging lighting
Current Channels
■■ Lamp flicker analysis 4 current channels
■■ Neutral overheating Current range: 0 to 6000 A (CT dependent)
Current accuracy: 0.1% of reading + CT
■■ Solar (PV) analysis
Resolution: 16 bit
Crest factor: 4.0
SPECIFICATIONS Sampling Rate
Input Power 256 samples per cycle RMS. 1 MHz transient sampling rate.
120/240 V, 50/60 Hz
Real Time Clock
Battery Accuracy ±20 ppm
NiMH battery pack
Discharge time – up to 8 hours Measurement Parameters
Recharge time – 2 hours RMS voltage
RMS current
Data storage Sags / dips / swells
External SD card (32GB max) Transients (1 msec) (±2697 V)
Sub-cycle events 64 msec (notching, noise)
Communication Rapid voltage change
USB communications Phase angle stability
Ethernet communications IEC Unbalance
USB stick for data and configuration file transfer ANSII Unbalance
SD card for direct data transfer Power (KW, KVAR, KVA, DPF & TPF)
Energy (KWH, KVARH & KVAH)
Environmental Power Factor (1 to 0 to -1)
Operating: -20° C to 50° C (-4° F to 122° F) Phase Angle
Storage: -30° C to 60° C (-22° F to +140° F) THD/TDD
Relative humidity: 0-95% non-condensing Harmonics
Inter-Harmonics
Case Power Harmonics
IP54 enclosure Harmonic Direction
Flicker
Display Waveform Capture
Backlit 11.5 cm x 8.5 cm color VGA Frequency
Power Factor Software
Accuracy: ±0.02 + CT error Windows compliant (Win 7, Win 8 and Win 10)
MPQ1000
Handheld Power Quality Analyzer
ACCESSORIES Split Code Current Clamp Split Code Current Clamp
1000 A Available options:
CP-1000WCE 1000 A split core CT 100 A (CP-100CE-ID)
(CP-1000WCE)
20 A (CP-100CE-ID)
5 A (CP-5CE-ID)
CP-100CE-ID 100 A split core CT
CP-20CE-ID 20 A split core CT
CP-5CD-ID 5 A split core CT
CP-600DC-ID 600 A split core AC/DC current clamp
MCCV Rain Tight Flexible Current Clamps
These flexible rain tight CTs have four current ranges that are all
self-identifying.
The current clamps are powered from the MPQ1000 Analyzer.
Ranges include 60 A, 600 A, 3000 A and 6000 A.
MPQ1000 Voltage Lead Set Hall Effect Current Clamp
600 A dc and 400 A ac
Standard set of voltage leads included with MPQ1000. (CP-600DC-ID)
Includes: 5 voltage leads and 1 ground lead.
Range = 0 to 1000 V ac/dc
Multiple colar straps. Configure your voltage leads for the required
color code. MCCV Rain Tight Flexible
Current Clamps
CAT IV @ 600 V Available diameters:
18 cm (MCCV6000-18)
MPQ0004 Optional Fuse Adapter Kit 27 cm (MCCV6000-27)
This adapter connects to the MPQ1000 standard fuse lead.
Includes 4 adapters with multiple color straps.
MPQ1000 Voltage Lead Set Optional Fuse Adapter Kit
(2007-259) (MPQ0004)
MPQ1000
Handheld Power Quality Analyzer
ORDERING INFORMATION
Item (Qty) Cat. No. Item (Qty) Cat. No.
MPQ1000 8 channel 3-phase power MPQ1000 Optional Accessories
quality analyzer
Fused adapter kit (3 adapters and fuses) 1008-645
Included Accessories
Kit of 4 plunger clips 1008-759
Unfused voltage lead kit 2007-259
Carrying strap 2009-205
32 GB SD card 90023-619 Current Clamps
USB memory stick: contains MPQ user 1009-697 Four range 6000 A AC rain tight, MCCV6000-18
guide, Megger PQ PC software and self-identifying, flexible rope current
Megger PQ PC software user guide clamps (18 cm ID)
USB communications cable CA-USB Four range 6000 A AC rain tight, MCCV6000-27
Ethernet communications cable 36798 self-identifying, flexible rope current
clamps (27 cm ID)
Soft sided case 2007-626-1
1000 A AC split core current, self- CP-1000WCE-ID
Universal 24 Vdc power adapter 90011-992
identifying current clamps (50 mm ID)
Battery pack 2008-369
100 A AC split core current, self- CP-100CE-ID
identifying current clamps (20 mm ID)
20 A AC split core current, self- CP-20CE-ID
identifying current clamps (20 mm ID)
5 A AC split core current self-identifying CP-5CE-ID
current clamps (20 mm ID)
AC/DC 600 A split core current self- CP-600DC-ID
identifying current clamps (50 mm ID)
SALES OFFICE MPQ1000_DS_US_V01
Megger [Link]
2621 Van Buren AVenue ISO 9001:2008
Norristown, PA 19403 USA The word ‘Megger’ is a registered trademark
T 866-254-0962 Specifications are subject to change without
E VFCustomerSupport@[Link] notice
