Scribd
Upload
188 views1 page

Hex Bolt Quality Certificate DIN931

This certificate provides the results of quality testing for hex bolt DIN931 CL8.8 measuring M8-1.25x45. Chemical, mechanical, dimensional, and surface analyses were conducted and found to meet specifications. Test values for chemical composition, mechanical properties, dimensions, thread tolerance, and surface finish were all within standard values.

Uploaded by

amicikicik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views1 page

Hex Bolt Quality Certificate DIN931

This certificate provides the results of quality testing for hex bolt DIN931 CL8.8 measuring M8-1.25x45. Chemical, mechanical, dimensional, and surface analyses were conducted and found to meet specifications. Test values for chemical composition, mechanical properties, dimensions, thread tolerance, and surface finish were all within standard values.

Uploaded by

amicikicik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

NINGBO BRIGHTFAST CO.

,LTD
CERTIFICATE OF QUALITY EN10204 3.1

CERTIFICATE No.:17NBF-063-2
Date of testing: MAY.05.2018 Standard Reference:
Customer: PT. KAIROS MULTI SEJAHTERA Mechanical Property: In according to with specification of ISO 898-1
Invoice: 17NBF-063-2 Dimension: In according to with DIN931
Surface Treatment: In according to with DIN931

Product description: HEX BOLT DIN931 CL8.8


Size: M8-1.25x45
Surface Finish: BLACK
Head Mark: 8.8+WF

1. CHEMICAL ANALYSIS (%)


C Mn Si P S Ni Cr Mo
Standard Value 0.32-0.40 0.70-1.00 0.17~0.37 ≤0.035 ≤0.035 ≤0.025 ≤0.025 /
Test Value 0.35 0.75 0.20 0.020 0.040 0.01 0.02 /

2. MECHANICAL PROPERTIES
Yield Stress at
Tensile 0,2% non tensile Impact
Elongation Proof loads Hardnes
Test Item Strength proportional loads test (J) -
(min. %) (N) s (HRC)
(min. Mpa) elongation (N,min) 20ºC
(min. Mpa)
Standard Value 800 640 12 29200 21200 22-32 27
Test value 800 645 12 29200 21200 23-29 27

3. DIMENSIONAL ANALYSIS (mm)


Width across Width Head Thread Nominal Diameter
Test Item
flats (s) across height (k) length (b) length (d)
Max. 13.00 / 5.45 / 45.50 /
Standard Value
Min. 12.73 14.38 5.15 22.00 44.50 /
Test Value 12.95 15.06 5.28 22.75 44.85 /

4. THREAD TOLERANCE 5. SURFACE FINISH


Coating
Surface Adherence
Test Item GO (6h/6g) STOP (6h/6g) Test Item Thickness
visual test
(μm)
Standard
Standard Value 6g 6g OK OK OK
Value
Test result OK OK Test Value OK OK OK

Enginerr:Ningbo Brightfast Machinery Industry Trade Co.,Ltd Q.C. CENTER MR WADE

You might also like