Inspection

Connection Ltd
Cable solutions specialists for
NDT and inspection systems.

Equipment
Price List
July 2023

www.inspectionconnection.co.uk
 Inspection
Equipment List Connection Ltd

Contents Page

- Compression Wave 1
- TOFD Transducers 2

Ultrasonic Thickness Measurement

- ARTIO - Wireless Ultrasound 3

Cables
- Ultrasonic 4
- TOFD Cables 5
- Tube Inspection 6
- Crawler Cables 7
- Umbilical Assembly 8

Transducers
- Ultrasonic 9
- PAUT 10

Wedges
- PAUT 11
- Custom 12

Accessories
- Low-Pro, Batteries, adaptors, Beamer... 13

Custom Design 16

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
 Inspection
Connection Ltd

Dual element ultrasonic transducer for high-temperature, in-service

thickness, corrosion and erosion surveys for use in applications across
refining, oil & gas, energy, nuclear, aerospace and process sectors.

Featuring high wear resistance, with surface

temperature range from -55 to +550 °C (-67 to
+1022 °F), with continuous operation without
cooling up to 350 °C (662 °F).

HS582i £305.00
5 MHz, 8 mm diameter dual element transducer, with microdot
connectors and including red handle.

HS2122i £390.00
2.5 MHz, 18 mm diameter dual element transducer, with microdot
connectors and including red handle.

HS5122i £390.00
5 MHz, 18 mm diameter dual element transducer, with microdot
connectors and including red handle.

HT UT Handle Set £240.00

Includes as standard:
2" stainless steel handle
Protective cable gland
1.5m twin coaxial cables with high temperature
resistant sleeving.

Compatible with Ionix's HotSense™ transducer, the

High-Temperature UT Handle is the perfect
accessory to allow a technician to more safely
perform manual ultrasonic testing on high-
temperature surfaces.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 1
 Inspection
Connection Ltd

Be ready for any weld inspection with a complete set of HotSense™

Time-of-Flight Diffraction (TOFD) transducers for on-stream
inspection of a wide range of welds, depths and vessel diameters.

A full kit includes the following and is subject to POA:

HotSense™ TOFD - 70 deg, 6 MHz

probe, with 5 mm replaceable pivot
pins, couplant nozzles to fit 4 mm
to 4.5 mm tube.
All probe angles provided as pairs
with the following wedge profiles:
HotSense™ TOFD - 60 deg, 5 MHz
Flat, NPS 8", NPS 12" and NPS 16"
probe, with 5 mm replaceable
pivot pins, couplant nozzles to fit 4
Total of 24 HotSense™ TOFD
mm to 4.5 mm tube.
Probes

HotSense™ TOFD - 50 deg, 5 MHz

probe, with 5 mm replaceable
pivot pins, couplant nozzles to fit 4
mm to 4.5 mm tube.

A range of cabling and irrigation accessories are

available for use with the HotSense™ TOFD
equipment. Please ask for further information.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 2
Ultrasonic Thickness Inspection
Measurement Connection Ltd

ARTIO - Wireless Ultrasound POA

ARTIO is a wireless ultrasonic inspection device that couples to
your iPhone/iPad. Using the downloadable ARTIO app, you are
ready to connect and start scanning.

ARTIO enables users to perform thickness

measurements and corrosion surveys from your
iPhone/iPad. With A-Scan and high-resolution B-
Scan views, you can record thickness
measurements easily, export results easily,
directly over the internet with zero fuss and
maximum flexibility.

ARTIO is incredibly light-weight and fits in the palm of your hand. It can be easily
secured out of the way in your pocket or in the purpose-fit harness, under/over
your coveralls.

These innovative features make it a perfect solution for a number of applications,

which include, but is not limited to:
- rope access UT
- mounting on a drone to perform UT
- boiler surveys (grid features and emailing results instantly)
- confined spaces and other tight/enclosed environments

A number of accessories are available for ARTIO that

enhance user-experience and utilise the system to its
full potential. These include:
- purpose-fitting harness
- fully rotating wrist strap for iPhones
- clicker button to record UT readings

Get in touch to learn more about ARTIO:

an exciting and innovative new solution
for ultrasonic testing.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 3
 Inspection
Ultrasonic Cables Connection Ltd

Single Twin

Standard
LEMO 1S - LEMO 1S £42.00 £84.00
LEMO 1S - LEMO 00 £37.70 £75.40
LEMO 1S - Subvis £33.60 £67.20
LEMO 1S - Microdot £33.60 £67.20

LEMO 00 - LEMO 00 £34.20 £68.40

LEMO 00 - Subvis £30.90 £61.80
LEMO 00 - Microdot £30.90 £61.80

BNC - BNC £21.60 £43.20

BNC - Subvis £19.80 £39.60
BNC - Microdot £18.80 £37.60

AUT Corrosion Mapping

LEMO 00 - Microdot (10.0m) £172.50
LEMO 00 - Microdot (20.0m) £195.00
LEMO 00 - Subvis (10.0m) £172.50

Twin cables are coupled using flame-

retardant sleeving as standard.

Cables can be assembled to suit

custom requirements (length,
connector type, umbilical sleeving...).

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 4
 Inspection
TOFD Cables Connection Ltd

TOFD cables are available individually or in a set of 3. Standard lengths are 0.5m
and 3.0mm, but can be made to custom requirements.

For highly sensitive operations, TOFD cables are available in Electro-Magnetic

Interference (EMI) Reducing (EMI-R) sleeves, to aid in minimising signal
interference and improve the quality of data acquisition.

High-temperature options are also available.

Standard TOFD Cable

0.5 metre £28.70
3.0 metre £36.10
Full set (1x 0.5m, 2x 3.0m) £95.00

EMI-R TOFD Cable

0.5 metre £70.00
3.0 metre £82.00
Full set (1x 0.5m, 2x 3.0m) £220.00

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 5
 Inspection
Tube Inspection Connection Ltd

IRIS Tube Inspection Cable

Full nylon cable assembly including fittings and available as
standard in the following sizes:
10.0m £675.50
15.0m £690.00

IRIS Tube Inspection cables can be made to any length, with 10m and 15m being
our standard lengths. For custom length requirements, please get in touch for a
quote.

IRIS Turbine POA

Precision engineered for high performance, these turbines are
available in the following sizes:
8.5mm Turbine
10mm Turbine
12mm Turbine
17mm Turbine

IRIS Centering Rod

Stainless Steel centering rod for standard IRIS tube inspection
cables:
Rigid £105.00
Flexible £245.00

IRIS Centering Device POA

Designed for larger diameter tubing, the Centering Device is a
must for producing effortless and highly accurate data during
inspections.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 6
 Inspection
Crawler Cables Connection Ltd

JIREH Encoder Cable £275.00

NAVIC 1 to Omniscan MX2/X3 Compatible
NAVIC 2/SKOOT to Omniscan MX2/X3 Compatible

JIREH Auxiliary Cable £265.00

Connects the handheld controller to NAVIC and SKOOT
crawlers
£295.00
Encoder Cable
MCU-2000 to Omniscan MX2/X3 Compatible

If you have a bespoke requirement for crawler cables not listed above or to suit
alternative inspection systems, please get in touch and we will endeavour to fulfil
your request.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 7
 Inspection
Umbilical Assembly Connection Ltd

Keep your cables organised and protected with our umbilical assembly service.
With endless possibilities you can safeguard your cables to suit numerous
environments such as high temperature, electro-magnetic interference (EMI) and
more.

Combine power, irrigation, ultrasonic

and encoder cabling in one sleeve to
improve management and longevity.

Umbilicals for crawler systems can be

assembled at custom lengths and
individually & uniquely identified improving
management and productivity.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 8
Ultrasonic Inspection
Connection Ltd
Transducers

We are proud to offer a range of standard ultrasonic transducers by Phoenix

Inspection Systems Ltd. Conformance certificates are provided as standard.

Additionally to those below, there is an extensive range of transducers to suit all

applications from high-temperature surfaces, small footprints and more. Please get
in touch to discuss your requirements and how we can help you out. All transducers
are subject to POA.

Compression Wave
Type Angle Crystal Size Frequency
Single crystal 0° 10mm, 15mm, 20mm 2MHz, 2.5MHz,
Twin crystal 4MHz, 5MHz

Shear Wave
Type Angle Crystal Size Frequency
Single crystal 38°, 45°, 60°, 70° 10mm 2MHz, 4MHz
Twin crystal

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 9
Phased Array Inspection
Connection Ltd
Transducers

Our range of PAUT transducers are manufactured in the USA and are compatible
with both Vermon-NDT, Olympus and IC wedges.

Transducers are made with IPEX EZ latch connectors

with 2.5 metre length cabling as standard. Z-PACK
and Hypertronics connector versions are available
upon request.

Custom frequencies, element counts and lengths of

cabling can also be requested.

The range available covers the most

frequently used series of transducers,
including:
Type 00
Type 10
Type 11
Type 12
Type 15
Type 17 DMA
Type 27 DMA
Type 31
Type 32
Type I01
Type P1
Type PX1

As standard, each transducer is

supplied with a small carry pouch
to stow away when not in use.

An EZ latch mount is also provided

to enable proper mating during
application.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 10
 Inspection
PAUT Wedges Connection Ltd

IC00-N60S Standard £165.00

IC10-N55S Standard £160.00

Wider footprint - irrigated £180.00
Aluminium frame - irrigated £198.00

IC12-N55S Wedge only (no sides) £170.00

With aluminium sides - irrigated £210.00
Wider footprint - irrigated £188.00
Irrigated aluminium sides £90.00

IC15-N60S Standard £165.00

IC17-DN55L0 Standard £395.00

IC27-DN55L0 Standard £380.00

IC31-N55S Standard £200.00

IC32-N55S Standard £200.00

AOD/COD curvatures available +£ POA

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 11
 Inspection
Custom Wedges Connection Ltd

Existing series of PAUT wedges can be modified to suit particular requirements at a

customer's request. This includes L-wave variants. Pricing is subject to POA.

Modifications can cater to reducing the

footprint of the wedges or even altering
the nominal angle for preferred beam
steering.

- AOD/COD curvatures available on request.

- Custom serial numbers/identifications can be
inscribed as per request.
- All wedges include spare screws for fastening
arrays. Spare sets of screws available on
request.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 12
 Inspection
Accessories Connection Ltd

Low-Pro £115.00
Introducing the latest tool designed to improve both cable &
scanning longevity, as well as reducing the scanning profile. This
enables users to extend scan lengths in those tighter, more
confined areas.

Operators can maximise the

potential of this tool by integrating
it with Inspection Connection's low
profile cabling.

When cables are secured down

through the tie-wrap loops, the
risk of snagging and subsequent
damage to cables is significantly
reduced.

Primarily designed with corrosion scanning in mind, the Low-Pro is currently

compatible with JIREH's raster arms, which work alongside both their NAVIC and
SKOOT crawler systems.

As standard, all Low-Pro kits

come with the following:
Low-Pro tool
2x captive screws
2x irrigation fittings
1x hex key

As well as being available as a

consumer product, we offer OEM
opportunities also, either in
custom colourings/logos or simply
as a blank item to customise
yourself.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 13
 Inspection
Accessories Connection Ltd

Mini-wheel Encoder
Compatible with Olympus wedges, our standard length mini-
wheel encoders are:
2.5m length £690.00
5.0m length £740.00
7.5m length £790.00

Encoder-to-Wedge Links £74.00

Used for fixing mini-wheel encoders to wedges during manual
scanning. Includes: both parts as well as the necessary screws
and hex key for securing to the wedge.

Connector Adaptors £28.00

A range of adaptors available to enable cable use on multiple flaw
detectors and inspection systems. Connectors covered include:
LEMO 1S, LEMO 00, BNC, Subvis and Microdot.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 14
 Inspection
Accessories Connection Ltd

Beamer® £15.00
The Beamer® is a useful “must-have” for all ultrasonic NDT
technicians, engineers and inspectors that simplifies the
indication drawing process. Made from a tough plastic for
durability on-site, this tool comes with a simple instruction
booklet to educate personnel on correct usage.

Lithium-ion Battery £235.00

Whether it's for the replacement of an old or damaged battery
or to be used as a spare during intensive projects, our lithium-
ion batteries are:
Compatible with Olympus Omniscans

Charging Station
Perfect for charging spare batteries whilst performing
scanning on-site, our 1-Bay and 2-Bay stations offer the
perfect solution for this.
1-Bay £195.00
2-Bay £355.00

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 15
 Inspection
Custom Designs Connection Ltd

At Inspection Connection Ltd. we are capable of designing a range of accessories

related to ultrasonic inspections that range from probe holders, wedge accessories
and more... Please get in touch to discuss any bespoke requirements you may
have.

Enquiries: [email protected]
Website: www.inspectionconnection.co.uk
Page 16