TEST REPORT

Name of Applicant/Licensee: M/s CM/A - or CM/L -

Valid upto
Address of Applicant/Licensee

IS Product

Grade/Type/Variety/Class
Declared values, if any
Batch/Lot No. Sr. No.
Date of Manufacturing Any other information
Date of start of testing Date of completion of testing

Sr. Specified Observed

Tests Clause IS Reference Remarks
No. Requirement Value(s)
1. Thickness 8.2 IS 12406 ± 0.3 mm ± 0.3 mm OK

2. Length 8.2 IS 12406 ± 3 mm / m ± 3 mm / m OK

3. Width 8.2 IS 12406 ± 3 mm / m ± 3 mm / m OK

4. Squareness 8.2 IS 12406 2 mm / m 2 mm / m OK

5. Density 11.4 IS 12406 600 – 900 kg/m3 640 - 850 OK

6. Moisture Content 11.5 IS 12406 5% - 10% 5% - 7.5% OK

- Avg 30
- Avg 28
N/mm2 ;
N/mm2 ;
Min 27
Min 25
N/mm2
N/mm2 (Up
(Up to 20
to 20 mm
mm
thickness)
Modulus of thickness)
7. 11.8 IS 12406 - Avg 25 OK
Elasticity - Avg 25
N/mm2 ;
N/mm2 ;
Min 22
Min 22
N/mm2
N/mm2
(Above 20
(Above 20
mm
mm
thickness)
thickness)
- Avg 2800 - Avg 2800
N/mm2 ; N/mm2 ;
Min 2500 Min 2500
N/mm2 (Up N/mm2
to 20 mm (Up to 20
Modulus of thickness) mm
8. 11.8 IS 12406 OK
Rupture - Avg 2500 thickness)
N/mm2 ; - Avg 2500
Min 2200 N/mm2 ;
N/mm2 Min 2200
(Above 20 N/mm2
mm (Above 20
 thickness) mm
thickness)
- Avg 0,9
- Avg 0,9
N/mm2 ;
N/mm2 ; Min
Min 0,8
0,8 N/mm2
N/mm2 (Up
(Up to 20 mm
to 20 mm
thickness)
thickness)
- Avg 0,8
9. Internal Bond 11.9 IS 12406 - Avg 0,8 OK
N/mm2 ;
N/mm2 ;
Min 0,7
Min 0,7
N/mm2
N/mm2
(Above 20
(Above 20
mm
mm
thickness)
thickness)
- Face 1500 N
Face 1500 N
- Edge 1250
Screw Withdrawal - Edge 1250 N
10. 11.10 IS 12406 N (for OK
Strength (for thickness
thickness >
> 12 mm)
12 mm)
-
Note: Attach extra sheet, if required
The above mentioned sample manufactured and tested at our premises is conforming/non-conforming
to the requirement(s) of IS 12406 and IS 2380
Seal of Firm Signature
Name
Designation
Date