0% found this document useful (0 votes)
124 views3 pages

TDS 1365882 1405419 1461229 US Loctite Super Glue Professional Carded Bottle 20 G 2018 04 06pdf

Uploaded by

wand.survey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
124 views3 pages

TDS 1365882 1405419 1461229 US Loctite Super Glue Professional Carded Bottle 20 G 2018 04 06pdf

Uploaded by

wand.survey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Revision: April 6, 2018

Supersedes: August 29, 2016


Ref. #: 507071

TECHNICAL DATA SHEET


Henkel Corporation
Professional and Consumer Adhesives
Rocky Hill, CT
Phone 1-800-624-7767

Super Glue Professional www.henkel.com www.loctiteproducts.com

DESCRIPTION:
Loctite® Super Glue Professional has proven superior performance over ordinary super glues. It
works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a
patented additive. The liquid formula works well on a variety of porous and non-porous surfaces and
close-fitting repairs. Loctite Super Glue Professional’s super strength formula is ideal for heavy-duty
projects and repairs. It dries clear and sets without clamping. Loctite Super Glue Professional is
resistant to moisture most chemicals and freezing temperatures.

RECOMMENDED FOR:
Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber
seals and O-rings. Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic,
rubber and hard plastics such as acrylic, polycarbonate, polystyrene and PVC.

LIMITATIONS:
• Does not bond to Polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE),
silicone or foam rubber, polystyrene foams, glass, or pure bone china
▪ Not for assemblies which will hold hot liquids
▪ Bonded items should not be placed in oven, microwave or dishwasher
▪ Not for exterior applications
▪ Do not use on glazed surfaces
▪ Not for repairs needing high flexibility or for gap-filling applications

FEATURES & BENEFITS:


Feature Benefits
Item # Package Size
Dries clear and colorless..……………..……….. Invisible repairs
1365882 Carded Bottle 20g
Sets in seconds……………..…………………… No clamping required
1405419 Carded Bottle 20g
Precise application………….…………………… Pinpoint nozzle
1461229 Carded Bottle 20g

TECHNICAL DATA

Typical Uncured Physical Properties Typical Application Properties


Color: Clear and Colorless Application Temperature: Do not apply below 50F (10C)
Appearance: Liquid Odor: Sharp, irritating (use in a well-ventilated area)
Base: Ethyl cyanoacrylate Set Time: 5 to 45 seconds (see Table 1) *
Specific Gravity: 1.05 Handling Time: Leave undisturbed for at least 5 minutes.
For best results, allow full bond strength to
develop overnight before handling.
VOC Content: < 2% by weight, CARB Max. Strength Cure Time: 12 – 24* hours
< 20 g/l, SCAQMD rule 1168 *Times are dependent on temperature, humidity,
porosity of surface bonded and amount of
adhesive used
Flashpoint: 176°F (80°C) to 200°F (93°C) Clean Up: Scrape away cured adhesive
using a sharp-edged tool.

Loctite® Super Glue Professional


Page 1 of 3
Revision: April 6, 2018
Supersedes: August 29, 2016
Ref. #: 507071

TECHNICAL DATA SHEET


TECHNICAL DATA
Shelf Life: 21 months from date of manufacture Lot Code Explanation: 62944277
(unopened) 6 = Last Digit of Year of Manufacture
294 = Day of Manufacture based on
365 days per year
For example: 6294 = October 1, 2016

Typical Cured Performance Properties


Color: Clear and colorless Cured form: Non-flammable, hard, solid.

Varies from 290-2900 psi (2-20 N/mm²) depending


Tensile Strength:
on the substrate (see Table 2). Moisture Resistant: Yes
ISO 4587
Cure Time: 12-24
Motor oil, leaded petrol, ethanol, isopropanol Dishwasher Safe:
Chemical Resistance: No
and Freon TA.
Service Temperature: Up to 180F (82C)

Table 1: Table 2:
Fixture Time to Develop a Shear Strength of 14.5 psi at 73°F Lap Shear Strength Results after 72 hours at 73°F
Substrates Time (seconds) Shear Strength
Substrates
Steel (degreased) 20 to 45 psi N/mm2
Aluminum 2 to 10 Aluminum (etched) 290 to 1600 2 to 11
Zinc Dichromate 10 to 30 Steel (grit blasted) 2500 to 3500 17 to 24
Neoprene <5 Zinc Dichromate 70 to 290 0.5 to 2
Rubber, Nitrile <5 ABS 1000 to 1300 7 to 9
ABS 1 to 2 PVC 1000 to 2000 7 to 16
PVC 3 to 10 Polycarbonate 1000 to 1600 7 to 11
Polycarbonate 5 to 10 Phenolic 150 to 730 1 to 5
Phenolic <2 Neoprene 150 to 290 1 to 2
Wood (Balsa) <1 Rubber, Nitrile 150 to 290 1 to 2
Wood (Oak) 10 to 30
Wood (Pine) 10 to 20
Chipboard 5 to 10
Fabric 10 to 20
Leather 5 to 10
Paper 5 to 10

DIRECTIONS:
Tools Typically Required:
Tissue paper.

Safety Precautions:
Use in a well-ventilated area. Protect work area before and during use of the glue. Nitrile gloves and apron recommended. Do not use PVC,
nylon, or cotton gloves. Skin contact may cause burns. Wash hands after use
Fingers Bonded? Apply cooking oil to bonded area of skin. Gently message bonded fingers back and forth to “peel” apart. Use rolling, peeling
motion – do not pull. Once apart use high moisture hand lotions to aid ion removal of excess glue from skin.

Preparation:
Surfaces to be bonded must be close fitting, clean, dry and free from oil, wax and paint. Protect work area. For best results,
lightly roughen smooth surfaces. Pre-fit parts to be joined.

Application:
Twist off cap by turning counter-clockwise ¼ turn. Apply sparingly to one surface only using approximately one drop per square
inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition
parts. Clean excess adhesive with tissue paper and replace cap. Twist on cap to close and seal.

Clean-up
After cleaning, wet any tissue used for wiping off glue with water and dispose of. When cleaning up larger quantities of uncured
adhesive, apply water and allow to cure and then scrape up. Note this may result in damage to the surfaces. Cured adhesive
may be cut away with caution using a sharp blade, removed with acetone or with boiling water precautions.
Loctite® Super Glue Professional
Page 2 of 3
Revision: April 6, 2018
Supersedes: August 29, 2016
Ref. #: 507071

TECHNICAL DATA SHEET


STORAGE AND DISPOSAL

Not damaged by freezing in the unopened container. Optimal shelf life is achieved when unopened container is stored from 36°F to 46°F (2°C
to 8°C). After opening, it is not recommended that the product be stored cold or frozen. Once opened, the product is best stored tightly sealed,
in an upright position, in a dry location away from heat sources or sun exposure. Humidity and high temperatures may decrease shelf life. Use
an approved hazardous waste facility for disposal.

LABEL PRECAUTIONS

WARNING: Contains Cyanoacrylate. Can cause severe eye injury. Bonds skin instantly.
Skin contact may cause burns. Harmful if swallowed. May cause allergic skin reaction. May
cause delayed irritation and sensitization. Use in well ventilated area. Avoid contact with skin,
eyes, and clothing. DO NOT TAKE INTERNALLY. Wash thoroughly after handling. FIRST
AID: In case of eye contact, flush with water for 15 minutes; call a physician. For skin contact,
flush with water. For ingestion, do not induce vomiting; call a physician. If spilled on clothing,
flush with large quantities of water. KEEP OUT OF REACH OF CHILDREN.

Refer to the Safety Data Sheet (SDS) for further information

DISCLAIMER

The information and recommendations contained herein are based on our research and are believed to be accurate, but no warranty, express
or implied, is made or should be inferred. Henkel recommends purchasers/users should test the products to determine acceptable quality and
suitability for the intended use. All adhesive/sealant applications should be tested under simulated or actual end use conditions to ensure the
adhesive/sealant meets or exceeds all required project specifications. Since assembly conditions may be critical to adhesive/sealant
performance, it is also recommended that testing be performed on specimens assembled under simulated or actual production conditions.
Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or
recommendation to practice any invention covered by any patent, without authority from the owner of the patent.

Trusted Performance. Proven Results. For over 50 years, Loctite Brand adhesives and sealants have taken
on the toughest jobs. Used in race cars, airplanes, and even in the space-shuttle, Loctite provides solutions
for the most demanding industrial, and consumer applications. Loctite gives you not the specialization, power
and performance to not only get your job done, but to get it done right.

For Technical Assistance call: 1-800-624-7767 – Mon-Fri - 9:00a – 4:00p ET


www.loctiteproducts.com

Loctite Brand is part of the Henkel family of brands. Founded in 1876, Henkel is a global leader in the
consumer and industrial businesses. Henkel operates worldwide with leading brands and technologies
in three business areas: Laundry & Home Care, Beauty Care and Adhesive Technologies.

Henkel Corporation - Professional & Consumer Adhesives Headquarters - Rocky Hill, CT 06067
www.henkelna.com

Loctite® Super Glue Professional


Page 3 of 3

You might also like