Scribd
Upload
137 views1 page

Valve Data Sheet for BLAC40R Model

This document is a data sheet for a ball valve that provides specifications for valve types, pressure ratings, design codes, testing requirements, materials, and special requirements. It specifies ball valves from 8-48 inches in size, with pressure ratings up to 19.6 barg at temperatures from -29 to 250 degrees C. Key materials include A216 WCB or A105 for the body and bonnet, with trim and sealing materials specified in the engineering data sheets. Design and testing requirements comply with international standards like API 6D, ISO 17292, and ASME B16.34.

Uploaded by

정동현
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
137 views1 page

Valve Data Sheet for BLAC40R Model

This document is a data sheet for a ball valve that provides specifications for valve types, pressure ratings, design codes, testing requirements, materials, and special requirements. It specifies ball valves from 8-48 inches in size, with pressure ratings up to 19.6 barg at temperatures from -29 to 250 degrees C. Key materials include A216 WCB or A105 for the body and bonnet, with trim and sealing materials specified in the engineering data sheets. Design and testing requirements comply with international standards like API 6D, ISO 17292, and ASME B16.34.

Uploaded by

정동현
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Title: Valve Data Sheet BLAC40R

End To End End Type End Type End Size From Size To
Valve Type Notes
Standard 1 2 Standard (in) (in)
BALL VALVE FULL
ASME B16.10 LONG RF RF ASME B16.5 8.00 24.00
BORE
BALL VALVE FULL
API 6D RF RF MSS SP-44 30.00 36.00
BORE
BALL VALVE FULL
MANF. STD RF RF MSS SP-44 40.00 48.00
BORE

Notes
Pressure Rating CL 150
Design Code API 6D, BS EN ISO 17292, ASME B16.34 130
Fire Test API 6FA, BS EN ISO 10497, API 607
General Requirement VSK V405
Leak Test VSK V404
Marking VSK V003
Operator VSK V004

Max Design Pressure Barg 19.6 19.6 19.2 17.7 15.8 13.8 12.1
At Temperature Deg. C -29 38 50 100 150 200 250

Subject/Item Design and Material Requirement Material MDS EDS


BODY/BONNET Split body 2 or 3 pc design, bolted bonnet A216 WCB/ C02
A105 C01
INSIDE TRIM Bi-directional sealing (by seal on both sides of ball). Designed for
simultaneous full pressure on both sides of closed valve with no
pressure in cavity. Cavity relief by seat "leakage" to inside of valve
PORT Full Bore, FB
STEM Material according to EDS NTR1
CLOSURE Trunnion mounted ball (solid); Material according to EDS NTR1
MEMBER
SEATS Seat ring with soft seat insert; Insert material to be suitable for full NSS1
pressure and temperature rating. Material according to EDS NTR1
SPRINGS UNS N0625
UNS N10276
UNS N07750/
INCONEL X750
SEALS Lip seal/o-ring design and fire seal or packed gland for stem sealing
LIP SEAL Material according to EDS NSM1
O-RING Material according to EDS NSM1
FIRE SEAL Expanded graphite not less than 98% purity
OUTSIDE TRIM Cavity external bleed plug of anti-blowout design
BOLTING Material according to EDS NB02
SPECIAL Wetted parts suitable for sour service to NACE MR0175/ EN ISO 15156
REQUIREMENTS

Notes:

001 NON-COMPLIANCE TO NACE REQUIREMENT MAY BE ACCEPTED FOR NON-SOUR SERVICES.


130 DESIGN SHALL ALSO COMPLY TO ASME B16.34, ALTERNATIVELY ANSI/ASME SECT VIII DIV 1 OR 2.
WHEN NON-METALLIC MATERIALS ARE CHOSEN AS STEM AND/OR SEAT SEALING, THE
OPERATIONAL TEMPERATURE FOR THE VALVE SHALL BE LIMITED TO THE REQUIREMENTS GIVEN
BY EDS NSM1 & NSS1.

You might also like