HDF1 METALLIC HEAVY DUTY FLAP VALVE
TECHNICAL DATA SHEET
SERIES
HEAVY DUTY FLAP VALVE PUMP
For fluids containing up to line sized solids
PERFORMANCE
SUCTION / DISCHARGE PORT SIZE
• HDF1: 1” (25.4mm) NPT(F)
• HDF25: 1” (25.4mm) BSP Tapered
CAPACITY
• 0 to 70 gallons per minute ( 0 to 265 LPM)
AIR DISTRIBUTION VALVE
• No-lube, no-stall design
BAR
PSI
Performance based on water at ambient temperature.
SOLIDS-HANDLING 7 100
10 (17) AIR CONSUMPTION IN SCFM
• Up to 1 in. (25.4mm) 100 20 (34)
AIR PRESSURE IN PSI
PS
I (6
HEADS UP TO 6 .8 B
ar) 30 (51)
80
• 125 psi or 289 ft. of water 80 P
5 SI (5
(8.8 Kg/cm2 or 88 meters) .44 40 (68)
NPSHR
Bar
)
MAXIMUM OPERATING PRESSURE 60
HEAD
4 60 P
• 125 psi (8.6 bar) SI (4
.08
Bar 50 (85)
)
DISPLACEMENT/STROKE
Meters
3
40
Feet
• .10 Gallon / .38 liter 40 PS
I (2.72
Bar)
2 30 9.1
WEIGHTS 25 7.6
20 20 6
• Aluminum 48 lbs. (21kg) 1
20 PSI (1
.36 Bar) Ai 15 4.5
r Inlet Pres
• Stainless Steel 79 lbs. (36kg) sure 10 3
5 1.5
0
0 10 20 30 40 50 60 70 80 GPM
0 25 50 75 100 125 150 175 200 225 250 275 300 LPM
DIMENSIONS CAPACITY
16.73
"C"
425 SUCTION PORT
"B" 1" FNPT (HDF1)
1" BSPT (HDF25)
2.38 (OPTIONAL 90
"A"
60 PORT ROTATION)
AIR EXHAUST
3/4" FNPT 8.56
217 4X .28 [7] MOUNTING HOLE
NOTE:
UNIT FURNISHED WITH SUB-BASE PLATE
AND RUBBER FEET AS STANDARD. FOR
STATIONARY BOLT DOWN USE, RUBBER
"D" FEET CAN BE REMOVED.
15.59 16.41
396 417
14.03
356
9.00
6.89
175 8.57
229
218
2.57
65
AIR INLET DISCHARGE PORT
1/2" FNPT 1" FNPT (HDF1) 2.38 .72
1" BSPT (HDF25) 60 18
5 YEAR LIMITED PRODUCT WARRANTY USE ONLY GENUINE SANDPIPER PARTS
EX
CLUSIVE
5 Year Guarantee for defects in material or workmanship. See All certification, standards, guarantees & warranties
FE
[Link]/content/warranty-certifications originally supplied with this pump will be invalidated by the use of
AT U R E
for complete warranty, including terms and conditions, limitations service parts not identified as “Genuine
and exclusions. SANDPIPER Parts.”
Warren Rupp, Inc. • A Unit of IDEX Corporation
II 2G EEx m c T5
800 N. Main St., Mansfield, Ohio 44902 USA
II 2D c IP65 T100°C ISO 9001 Certified
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 ISO 14001 Certified
EXPLANATION OF PUMP NOMENCLATURE
Your Model #: HD
__ __ _____ __ ___ __ __ __
(fill in from pump
nameplate)
Pump Pump Pump Discharge Diaphragm/ Design
Options Construction
Series Design Size Porting Valve Level
Model #: HD X XXXX, X XX X XX X
PUMP SERIES DESIGN LEVEL
HD Heavy Duty 2
PUMP DESIGN CONSTRUCTION
F Flap A Aluminum Wetted, Aluminum Air
I Cast Iron Wetted, Aluminum Air
PUMP SIZE II Cast Iron Wetted, Cast Iron Air
1 1” SI Stainless Steel Wetted, Cast Iron Air
25 1” BSPT (Tapered Thread) SS Stainless Steel Wetted, Aluminum Air
DISCHARGE PORTING POSITION
D Bottom OPTIONS
P1 Intrinsically Safe ATEX Compliant
WET END MATERIALS
Pulse Output
B Nitrile
N Neoprene
R Hytrel
P Santoprene
V FKM
W Buna flap & Santoprene Diaphragm
MATERIALS
Material Profile: Operating
Temperatures:
POLYPROPYLENE: A thermoplastic polymer. Moderate tensile
and flex strength. Resists stong acids and alkali. Attacked by
180°F
82°C
32°F
0°C
CAUTION! Operating temperature limitations are as follows: chlorine, fuming nitric acid and other strong oxidizing agents.
Max. Min.
PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with 250°F 0°F
CONDUCTIVE ACETAL: Tough, impact resistant, ductile. Good 190°F -20°F
excellent chemical resistance. Excellent for UV applications. 121°C -18°C
abrasion resistance and low friction surface. Generally inert, 88°C -29°C
High tensile strength and impact resistance.
with good chemical resistance except for strong acids and
oxidizing agents. SANTOPRENE®: Injection molded thermoplastic elastomer with 275°F -40°F
no fabric layer. Long mechanical flex life. Excellent abrasion 135°C -40°C
EPDM: Shows very good water and chemical resistance. Has 280°F -40°F
resistance.
poor resistance to oils and solvents, but is fair in ketones and 138°C -40°C
alcohols. UHMW PE: A thermoplastic that is highly resistant to a broad 180°F -35°F
range of chemicals. Exhibits outstanding abrasion and impact 82°C -37°C
FKM (FLUOROCARBON): Shows good resistance to a wide 350°F -40°F
resistance, along with environmental stress-cracking resistance.
range of oils and solvents; especially all aliphatic, aromatic and 177°C -40°C
halogenated hydrocarbons, acids, animal and vegetable oils. URETHANE: Shows good resistance to abrasives. Has poor 150°F 32°F
Hot water or hot aqueous solutions (over 70°F(21°C)) will attack resistance to most solvents and oils. 66°C 0°C
FKM.
VIRGIN PTFE: (PFA/TFE) Chemically inert, virtually impervious. 220°F -35°F
HYTREL®: Good on acids, bases, amines and glycols at room 220°F -20°F Very few chemicals are known to chemically react with PTFE; 104°C -37°C
temperatures only. 104°C -29°C molten alkali metals, turbulent liquid or gaseous fluorine and a few
fluoro-chemicals such as chlorine trifluoride or oxygen difluoride
NEOPRENE: All purpose. Resistance to vegetable oils. Gener- 200°F -10°F
which readily liberate free fluorine at elevated temperatures.
ally not affected by moderate chemicals, fats, greases and 93°C -23°C
many oils and solvents. Generally attacked by strong oxidizing Maximum and Minimum Temperatures are the limits for which these materials can be
acids, ketones, esters and nitro hydrocarbons and chlorinated operated. Temperatures coupled with pressure affect the longevity of diaphragm pump
aromatic hydrocarbons. components. Maximum life should not be expected at the extreme limits of the
temperature ranges.
NITRILE: General purpose, oil-resistant. Shows good solvent, 190°F -10°F
oil, water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated
88°C -23°C
Metals:
hydrocarbons and nitro hydrocarbons. ALLOY C: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.
NYLON: 6/6 High strength and toughness over a wide tem- 180°F 32°F STAINLESS STEEL: Equal to or exceeding ASTM specification A743 CF-8M for corro-
perature range. Moderate to good resistance to fuels, oils and 82°C 0°C sion resistant iron chromium, iron chromium nickel and nickel based alloy castings for
chemicals. general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.
II 2G EEx m c T5
II 2D c IP65 T100°C
NOTE: See service manual for ATEX details.
Warren Rupp, Inc. • A Unit of IDEX Corporation
800 N. Main St., Mansfield, Ohio 44902 USA
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 SP_DS_TemplateDataSheet_0817
