Picture Options ■■Audio Delay: Lets you correct timing mismatches between the Air ■■ Programmed: Shows all

■■Audio Delay: Lets you correct timing mismatches between the Air ■■ Programmed: Shows all channels and programs currently
The On Screen Menus ✎✎ When the TV is connected to a PC, you can only make
Sound Menu audio track and the video when you are watching the TV and If your TV is connected to an antenna choose Air, and then press scheduled using Timer Viewing.
changes to the Color Tone, Size and HDMI Black Level. listening to digital audio output from the TV through an external ENTERE. The TV will automatically start memorizing channels.
Your TV has two kinds of menus, the Main menu and the various ✎✎ Remote control buttons active on the Channel List screen.
Tools menus. The Main menu gives you access to most or all of ■■Color Tone (Cool / Standard / Warm): Cool makes the picture
Mode t device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the Cable xxGreen (Zoom): Enlarges or shrinks a channel number.

LED TV
the menu options available on your TV. The Tools menus display bluer (cooler). Warm 1 and Warm 2 make the picture redder ■■Standard: Selects the normal sound mode.
(warmer). slider. Press ENTERE when done (0ms ~ 250ms). If your TV is connected to a cable outlet, choose Cable, and then xxYellow (Select): Move the cursor to a channel. Press the Yellow
a selected number of frequently used menu options that change ■■Music: Emphasizes music over voices. press ENTERE. Go to Step 3.
■■Size: Set the size and aspect ratio of the picture on the screen. button to select the channel. A c mark appears. Repeat to select
depending on the screen you are viewing. ■■Movie: Provides the best sound for movies. Speaker Select additional channels. Then, open the Tools menu and apply a
Your cable box or satellite receiver may have its own set of Auto function to the channels you selected.
The Main menu has seven primary categories: screen sizes as well. However, we highly recommend you use ■■Clear Voice: Emphasizes voices over other sounds. A sound echo may occur due to a difference in decoding speed

user manual the TVs 16:9 mode most of the time. between the main speaker and the audio receiver. In this case, set If you choose Auto, and then press ENTERE, the TV will xxT (Tools): Displays the Channel List Tools menu. (The Tools
yy Picture yy Input Equalizer the TV to External Speaker. automatically select the correct Antenna source. Go to menus may differ depending on the situation.)
✎✎ The menu is deactivated, when the H. 264 (1080p) DTV is
being played. Available in Standard sound mode only. ✎✎ When Speaker Select is set to External Speaker, the Step 3. Display Icons Used in the Channel List Screens
yy Sound yy Application
[Link] Sets the picture to the 16:9 wide screen format. ■■Balance L/R: Adjusts the balance between the right and left volume and MUTE buttons will not operate and the sound 3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select
yy Channel yy Support Zoom1: Provides moderate magnification of the picture. Sides, speaker. settings will be limited. Icons Meaning
the type of digital and analog cable systems you have: STD, HRC,
yy Setup top, and bottom are cut off. ■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth ✎✎ When Speaker Select is set to External Speaker. or IRC. Most systems are STD (Standard). When done, select c A selected channel.
Zoom2: Provides larger magnification of the picture. Sides, top, Adjustment): Adjusts the loudness of specific bandwidth
To view the Main menu, press the MENU button on your remote. To and bottom are cut off. xxTV Speaker: Off, External Speaker: On Start, and then press ENTERE. The TV will start memorizing
* A Favorite channel.
frequencies. channels.
Transportation to and from the Service Center is the responsibility of view a Tools menu, press the TOOLS button on your remote. Wide Fit: Enlarges the aspect ratio of the picture so the picture ✎✎ When Speaker Select is set to TV Speaker.
Figures and illustrations in this User Manual are provided for reference ■■Reset: Resets the equalizer to its default settings. ✎✎ Channel memorization can take up to 45 minutes, depending ) A reserved program.
only and may differ from actual product appearance. Product design and the purchaser. Conditions covered are limited only to manufacturing ✎✎ The menu options that appear in the Main menu depend
fits the entire screen. xxTV Speaker: On, External Speaker: On
[Link] Sets the picture to the old, 4:3 format and puts black or gray DTS TruSurround on your cable system.
specifications may be changed without notice. defects in material or workmanship, and only those encountered on the Source you have selected. For example, if you have ✎✎ If there is no video signal, both speakers will be mute. ( A program currently being broadcast.
Important Warranty Information Regarding in normal use of the product. Excluded, but not limited to, are borders on the right and left of the picture. ✎✎ Memorized channels are added to the Added Channels
selected the HDMI source, the Channel category will not ✎✎ Do not watch your TV in the 4:3 format for a long time. Available in Standard sound mode only.
any originally specified provisions for, in-home or on-site services, Visual Impaired list. These are the channels you will see when you use the
Television Format Viewing minimum or maximum repair times, exchanges or replacements,
appear. To see the Channel category, you must first select TV
in the Source List.
Traces of borders displayed on the left, right and center of DTS TruSurround is a patented DTS technology that solves
Digital channels only.
Channel buttons on your remote. ❑❑ The Channel List Tools Menu t
the screen may cause image retention (screen burn) which the problem of playing 5.1 multichannel content over two
✎✎ See the warranty card for more information on warranty accessories, options, upgrades, or consumables.
The Menu options are presented below, arranged by Main menu is not covered by the warranty. speakers. TruSurround delivers a compelling, virtual surround Adds verbal description to the main audio to help the visually Clear Scrambled Channel The Channel List Tools menu contains most of the functions you
terms. For the location of a SAMSUNG Authorized Service Center, please Screen Fit: Displays the full image without any cut-off when can use on the All Channel, Added Channels, and Favorite List
categories. A Tools button symbol (t) next to an option sound experience through any two-speaker playback system, impaired. This function filters out scrambled channels after Auto Program is
Wide screen format LED Displays (16:9, the aspect ratio of the call toll-free: your TV is inputting HDMI (720p / 1080i / 1080p) or Component screens. To view, select a list screen, select a channel, and then
name indicates the option is also available in one of the Tools including internal television speakers. It is fully compatible with all completed. This process may take up to 20~30 minutes.
screen width to height) are primarily designed to view wide screen –– In the United States : 1-800-SAMSUNG (1-800-726-7864) (1080i / 1080p) HD signals. Sound Reset press the TOOLS button.
menus. multichannel formats.
format full-motion video. The images displayed on them should –– In Canada : 1-800-SAMSUNG ✎✎ HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p ✎✎ Press the ENTERE button to stop the Clear Scrambled ■■Add / Delete: Delete a channel from or add a channel to the
(1920x1080) or 720p (1280x720) resolution. ■■Reset All: Resets all sound settings to the factory defaults. Channel.
primarily be in the wide screen 16:9 ratio format, or expanded to Preferred Language Added Channels list.
Still image warning ✎✎ You can adjust and store settings for each external device you
fill the screen if your model offers this feature and the images are Picture Menu Digital channels only. ✎✎ This function is only available in Cable mode.
constantly moving. Displaying stationary graphics and images on Avoid displaying still images (such as jpeg picture files) or still have connected to an input on the TV. Picture Sizes available
by Input Source are listed below: Digital-TV broadcasts can transmit many audio tracks
Channel Menu To delete channels from the Added Channels list, follow these steps:
screen, such as the dark sidebars on non- expanded standard image elements (such as TV channel logos, TV shows or movies
Mode t simultaneously (for example, simultaneous translations of a program ❑❑ Managing Channels 1. Select one or more channels in the Added Channels list using
format television video and programming, should be limited to no in panorama or 4:3 format, stock or news scroll bars, etc.) on the the ▲/▼ buttons and the Yellow Select button on your remote.
more than 5% of the total television viewing per week. Additionally, screen. The constant display of still pictures can cause ghosting or Select your preferred picture mode. Input Source Picture Size into foreign languages). ❑❑ Memorizing Channels Channel List 2. Press the TOOLS button on your remote. The Tools menu
viewing other stationary images and text such as stock market image burn-in (image retention) on the LED screen, which will affect ✎✎ When your TV is connected to a PC, you can only select ATV, AV, Component (480i, 480p)
16:9, Zoom1, ✎✎ You can only select a language from among the ones being When you first set up your TV using Plug & Play, the TV See your list of Added channels, Favorite channels, or channels appears.
reports, video game displays, station logos, web sites or computer image quality. To reduce the risk of this effect, please follow the Entertain and Standard. Zoom2, 4:3 broadcast.
graphics and patterns, should be limited as described above for recommendations below: memorized the channels that were available over the air or through you've scheduled for viewing. Add or delete Favorite channels, add 3. Select Delete in the Tools menu, and then press the ENTERE
DTV (1080i), Component (1080i, 1080p), HDMI 16:9, Wide Fit,
all televisions. Displaying stationary images that exceed the above ■■Dynamic: Brightens the screen. Suitable for a bright room. Multi-Track Sound (MTS) your cable system and added them to the Channel List. The or delete channels from the Added Channels list, schedule channels button.
• Avoid displaying the same TV channel for long periods. (720p, 1080i, 1080p) 4:3, Screen Fit Antenna and Auto program functions described below let you
guidelines can cause uneven aging of LED Displays that leave ■■Standard: Suitable for a normal. or programs for viewing. Watch a channel by selecting the channel
• Always try to display any image in full screen mode. Use the TV's ■■Digital Clean View (Off / Low / Medium / High / Auto) : If the Analog channels only. re-run the channel memorization function without having to re-run in the All Channels, Added Channels, or Favorite screen, pressing To add channels to the Added Channels list, follow these steps:
subtle, but permanent burned-in ghost images in the LED picture. Picture Options menu to select the optimal screen size. ■■Movie: Darkens the screen, making it less glary. Suitable for
watching movies in a darkened room. broadcast signal received by your TV is weak, you can activate ■■Mono: Select for channels that are broadcasting in mono or if the Plug & Play procedure. the ▲ / ▼ buttons, and then pressing the ENTERE button. 1. Select one or more channels in the All Channels list using the
To avoid this, vary the programming and images, and primarily
• Reduce brightness and contrast values to the minimum required the Digital Clean View feature to reduce any static and ghosting you are having difficulty receiving a stereo signal. ▲/▼ buttons and the Yellow Select button on your remote.
display full screen moving images, not stationary patterns or dark ■■Entertain: Sharpens the picture. Suitable for games.
bars. On LED models that offer picture sizing features, use these
to achieve the desired picture quality. Values that exceed the that may appear on the screen. ■■Stereo: Select for channels that are broadcasting in stereo. Antenna (Air / Cable) 6 Air
minimum may speed up the burn-in process. ✎✎ Only available when the TV is connected to a PC. ✎✎ When the signal is weak, try all the Digital Clean View Before your television can memorize the available channels, you
6-1 ♥ TV #6 2. Press the TOOLS button on your remote. The Tools menu

Added Channels
controls to view different formats as a full screen picture. Be careful ■■SAP: Select to listen to the Separate Audio Program, which is appears.
in the selection and duration of television formats you use for • Frequently use all TV features designed to reduce image retention Backlight / Contrast / Brightness / Sharpness / options until the TV displays the best picture. usually a foreign-language translation. must select your TV's signal source, Air (using an antenna) or 7-1 ♥ TV #7
and screen burn-in. Refer to proper user manual section for ■■HDMI Black Level (Normal / Low) : For HDMI signals, select Cable. Select Menu >Channel > Antenna > Air or Cable. After 3. Select Add in the Tools menu, and then press the ENTERE
viewing. Uneven LED aging as a result of format selection and use,
details. Color / Tint (G/R) ✎✎ Depending on the program being broadcast, you can listen to 8 Air
button.
as well as burned-in images, are not covered by your Samsung the black level to adjust the screen depth. Low make blacks look Mono, Stereo or SAP. you have selected the signal source, go on to the Auto Program 9 Air

limited warranty. Contact SAMSUNG WORLD WIDE

■■Backlight: Adjusts the brightness of the screen by adjusting the darker. function. 9-1
10
♥ TV #9
Air
✎✎ All deleted channels will be shown on the All Channels list.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED If you have any questions or comments relating to Samsung products,
brightness of the individual pixels. ✎✎ Available only in HDMI mode (RGB signals). Auto Volume ✎✎ Selecting the signal source using the Antenna function also 10-1 ♥ TV #10
You add channels back to the Added Channels list on the
■■Contrast: Increases or decreases the contrast between dark and ■■Film Mode (Off / Auto) : Sets the TV to automatically sense and determines the signal source the TV is tuned to. For example, 11-1 ♥ TV #11 All Channels list.
WARRANTY STATEMENT please contact the SAMSUNG customer care center. Automatically adjusts the volume level when you change video
light areas of the picture. process film signals from all sources and adjusts the picture for sources or content so the level remains the same. if you receive your TV signal over the air, and you select Air ' Zoom ' Select T Tools
✎✎ A gray-colored channel indicates the channel has been
Subject to the requirements, conditions, exclusions and limitations Country CANADA U.S.A ■■Brightness: Adjusts the brightness of the screen. Not as Cable, you will see only snow. You must select Air to see a
optimum quality. deleted from the Added Channels list.
of the original Limited Warranty supplied with Samsung Electronics effective as Backlight. SPDIF Output picture.
(SAMSUNG) products, and the requirements, conditions, exclusions Samsung Electronics Samsung Electronics
✎✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i / Channel List Screens icons are listed on the left side. Select an ✎✎ The Add menu option only appears for deleted channels.
■■Sharpness: Sharpens or dulls the edges of objects. 1080i) and HDMI (480i / 1080i). The SPDIF (Sony Philips Digital InterFace) outputs an icon using the ▲/▼ buttons to view each list.
and limitations contained herein, SAMSUNG will additionally Address
Canada Inc. 2050 Derry America, Inc. 85
■■Color: Adjusts the color saturation. The higher the Color setting, ■■Motion Lighting (Off / On): Reduce power consumption by
Auto Program ■■Add to Favorite/Delete from Favorite: Lets you add channels to
Road West, Mississauga, Challenger Road uncompressed digital audio signal when you connect the digital ■■ All Channels: S
 hows all currently available channels including
provide Warranty Repair Service in the United States on SAMSUNG Ontario L5N 0B9 Canada Ridgefield Park, NJ 07660 the more intense the color. Low settings remove color and the The Auto Program function memorizes all channels that are and delete channels from your Favorites list.
brightness control adapted motion. audio jack on the back of the TV to a digital audio in jack on a those you deleted from the Added Channels
products purchased in Canada, and in Canada on SAMSUNG picture becomes black, white and gray. ✎✎ Available in Standard mode only. receiver or home theater. available over the air or through your cable system and adds them To add channels to the Favorites list, follow these steps:
list.
products purchased in the United States, for the warranty period Customer Care
1-800-SAMSUNG (726-7864) ■■Tint (G/R): Adjusts the amount of green and red in the picture. to the Channel List.
■■Audio Format (PCM/Dolby Digital): You can select the Digital ■■ Added Channels: Shows all Added Channels. These are the 1. Select one or more channels in the All Channels list using the
originally specified, and to the Original Purchaser only.
Center 
As you increase the amount of green, the amount of red Picture Reset Audio output (SPDIF) format. The available Digital Audio output To start Auto Program, follow these steps: channels that appear when you press the CH LIST button. ▲/▼ buttons and the Yellow Select button on your remote.
The above described warranty repairs must be performed by a [Link]/ca/ decreases and vice versa. ■■Picture Reset (Reset Picture Mode/Cancel): Resets the format may differ depending on the input source. 1. Push MENUm → Channel → Auto Program → ENTERE ■■* Favorite: Shows all favorite channels. 2. Press the TOOLS button on your remote. The Tools menu
SAMSUNG Authorized Service Center. Along with this Statement, Web Site
support (English) [Link]/us/
support
✎✎ When the TV is connected to a PC, you can only make picture settings to their factory defaults. ✎✎ By connecting the TV to a receiver or home theater with on your remote. The Antenna Source screen appears. appears.
[Link]/ca_fr/
the Original Limited Warranty Statement and a dated Bill of Sale changes to Backlight, Contrast, Brightness, and Dolby Digital and 5.1ch speakers and selecting Dolby
support (French)
Sharpness. 2. On the Antenna Source screen, select the source of your TV 3. Select Add to Favorite in the Tools menu, and then press the
as Proof of Purchase must be presented to the Service Center. Digital, you can maximize your interactive 3D sound signal.
experience. ENTERE button.

BN68-05829L-00 © 2014 Samsung Electronics Co., Ltd. All rights reserved. POWER

-1- -2- -3- -4-

P
To delete channels from the Favorites list, follow these steps: Programmed List (on the Channel List Screen) ❑❑ Other Channel Menu Functions If you selected Manual:
❑❑ Other Features Game Mode (On/Off) Boot Logo
1. Select one or more channels in the Favorite Channels list The Clock Set screen appears. Use the ▲/▼ buttons to When you connect a game console such as a PlayStation™ Enable/disable displaying the logo while the TV starts up.
Media Play
The Programmed list displays the channels and programs you
using the ▲/▼ buttons and the Yellow Select button on your have scheduled for viewing using the Time Viewing function. You Channel Mode (Added Channels/Favorite change the values in each field or use the number buttons to Program Rating Lock or Xbox™ to your TV, you can enjoy a more realistic gaming Enjoy photos, music and/or movie files saved on a
remote. can view, modify, or delete a show you have scheduled using the enter the values directly. Use the ◄/► buttons to move from experience by turning on the Game Mode function. Eco Solution
Channels) field to field. When done with all the fields, press ENTERE.
The Program Rating Lock feature lets you block programs USB Mass Storage Class (MSC) device. MEDIA.P
2. Press the TOOLS button on your remote. The Tools menu functions on the Programmed List screen Tools menu.
Lets you select the channel list displayed when you press the
you've determined are inappropriate for your children based on ✎✎ Precautions and limitations for game mode: ■■Energy Saving (Off / Low / Medium / High / Picture Off) :
appears. ✎✎ Available only when Clock Mode is set to Manual. the program's ratings. To access the Program Rating Lock xxBefore you disconnect the game console and connect another This adjust the brightness of the TV in order to reduce power
<CH> (Channel) button on your remote. For example, if you
3. Select Delete from Favorite in the Tools menu, and then Programmed List Screen Tools Menu t select Favorite Channels, you will only see Favorite channels when ■■Sleep Timer t feature and make any changes, you must enter a PIN (personal external device, set Game Mode to Off in the setup menu. consumption. If you select Picture Off, the screen is turned
identification number). To watch a blocked program, you must also xxIf you display the TV menu in Game Mode, the screen shakes off, but the sound remains on. Press any button except volume
press the ENTERE button. ■■Change Info: Change the scheduling information for a show or you press the <CH> button. Automatically shuts off the TV after a preset period of time. (30,
enter the same PIN. slightly. button to turn on the screen. ❑❑ Connecting a USB Device
■■Timer Viewing: You can schedule a channel to be displayed channel you have scheduled. 60, 90, 120, 150 and 180 minutes).
automatically at a set time, even when you are watching another To change the information, follow these steps: Fine Tune ✎✎ Program Rating Lock is not available in HDMI or ✎✎ Game Mode is not available when the input source is set to ■■Eco Sensor (Off / On): To enhance your power savings; the 1. Turn on your TV.
✎✎ To cancel the Sleep Timer, select Off. Component mode. TV. picture settings will automatically adapt to the light in the room.
2. Connect a USB device containing photo, music, and/or movie
channel. You must set the current time first in the Time > Clock 1. Select the Programmed List icon on the left side of the Analog channels only.
function to use Time Viewing. Timer 1 / Timer 2 / Timer 3 ✎✎ The default PIN number of a new TV set is “0-0-0-0”. You can ✎✎ After connecting the game console, set Game Mode to On. ✎✎ If you adjust the Backlight, the Eco Sensor will be set to Off. files to the USB jack on the back of the TV. A pop up window
Channel List screen, and then press the ENTERE button. If the reception is clear, you do not have to fine tune the channel,
To schedule a channel, follow these steps: set your own PIN using the Change PIN function. You may notice slightly reduced picture quality. Min. Backlight: When Eco Sensor is On, the minimum screen appears.
2. On the Programmed List screen, select the show or channel as this is done automatically during the search and store Turns the TV on and off automatically at times and days you
brightness can be adjusted manually. 3. Press the MEDIA.P button on your remote. The Media Play
1. Select a channel in the Added Channels list using the ▲/▼ entry you want to change, and then press the TOOLS button. operation. If the signal is weak or distorted, fine tune the channel select. You can set three different on/off timer settings. How It Works Caption
buttons and the Yellow Select button on your remote. The Tools Menu appears. manually. ✎✎ You must set the clock first. ✎✎ If Eco Sensor is On, the display brightness may change menu appears.
When you access the Program Rating Lock Menu functions for (On-Screen Text Dialogue) (become slightly darker in most cases) depending on the
2. Press the TOOLS button on your remote. The Tools menu 3. Select Change Info, and then press the ENTERE button. ✎✎ Select the channel, and then select Fine Tune. ■■On Time / Off Time: Set the hour, minute, am/pm, and the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN surrounding light intensity.
appears. The Time Viewing screen appears. ✎✎ Fine tuned channels that have been saved are marked with Activate/Inactivate fields for the On Time and Off Time. Use the screen closes and the Program Rating Lock Menu appears. Every
■■Caption: You can switch the caption function on or off. If ❑❑ Using the Media Play Menu
captions are not available, they will not be displayed on the ■■No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
3. Select Time Viewing in the Tools menu, and then press the 4. Use the ◄/► buttons to move from entry field to entry field an asterisk “*” on the right-hand side of the channel number ◄/► buttons to move from field to field. Use the ▲/▼ buttons time you access the Program Rating Lock functions, the PIN screen. how quickly the TV switches to standby mode, if no picture is
ENTERE button. The Time Viewing screen appears. and the ▲/▼ buttons to change the entries. Where numbers in the channel banner. to change the values in each field. To activate the timer with screen will appear and you must enter a PIN. Media Play
being received.
are displayed, you can also enter numbers directly using the ✎✎To reset fine-tuning, select the channel, select Fine Tune, and the setting you have chosen, set the Activate/Inactivate field to ✎✎ The Caption feature does not work in Component or
Timer Viewing
Activate.
When the Rating Lock screen appears, select Program Rating
HDMI mode. ✎✎ Disabled when the PC is in power saving mode.
number keypad on your remote. then select Reset on the Fine Tune screen. Lock, and then press ENTERE. Select On, and then press the Videos
Antenna Channel Repeat ■■Auto Power Off (Off / On): The TV will be automatically turned
■■Volume: Set the desired loudness. ENTERE key again. Depending on what type of programs or ■■Caption Mode: You can select the desired caption mode.
▲ 5. Press the ENTERE button when done. off when no user operation is received for 4 hours.
DTV Air 6-1 Once ■■Contents: To select what will be turned on when the timer movies you want to block, select one of the options on the screen, Default / CC1~CC4 / Text1~Text4: (analog channels only) The
▼ ■■Cancel Schedules: Cancel a show or channel you have
scheduled.
Setup Menu setting is activated. You can set the TV to turn on a specific and then press the ENTERE button. The options are listed below: Analog Caption function operates in either analog TV channel Auto Protection Time
Date Start Time channel or play back contents such as photo or audio files. ■■TV Parental Guidelines: You can block TV programs based mode or when a signal is supplied from an external device to the
To cancel a scheduled show or channel, follow these steps: ■■Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
01-01-2014 12 : 01 am Plug & Play Use the ◄/► buttons to move to move to the Contents field, on their ratings. This function allows you to control what your TV. (Depending on the broadcasting signal, the Analog Caption hours): If the screen remains idle with a still image for a certain SUM ■ Change Device
E Enter R Return
L Move U Adjust E Enter R Return 1. Select the Programmed List icon on the left side of the Lets you re-run the Plug & Play initial setup procedure. For and then press the ENTERE button. The Contents screen children are watching. function may or may not work with digital channels.) period of time you define, the screen saver is activated to prevent
Channel List screen, and then press the ENTERE button. appears. Use the ◄/► buttons to move from field to field. Use To open Media Play in the Menu, follow these steps:
instructions, see your Quick Start Guide. ■■MPAA Rating: You can block movies based on their MPAA Default / Service1~Service6 / CC1~CC4 / Text1~Text4: the formation of ghost images on the screen.
4. Use the ◄/► buttons to move from entry field to entry field 2. On the Programmed List screen, select the show or channel the ▲/▼ buttons to change the values in each field. ratings. The Motion Picture Association of America (MPAA) has 1. Press the MENU button. Then, press the ▲ or ▼ button to
(Digital channels only) The Digital Captions function works with
and the ▲/▼ buttons to change the entries. Where numbers entry you want to cancel, and then press the TOOLS button. Language - TV/USB: Select TV or USB. The USB device must be implemented a rating system that provides parents or guardians select Application on the left, and then press the ENTERE
are displayed, you can also enter numbers directly using the The Tools Menu appears. Set the menu language. connected to your TV before you can select USB. with advanced information on which films are appropriate for
digital channels.
✎✎ Service1~6 may not be available in digital caption mode
Support Menu button.
number keypad on your remote. children. 2. Press the ▲ or ▼ button to select Media Play (USB), and then
3. Select Cancel Schedules, and then press the ENTERE ✎✎ Choose between English, Español, and Français. - Antenna: Displays the current antenna source, Air or Cable. depending on the broadcast. press the ENTERE button.
✎✎ If you select Everyday or Every Week, the date you button. The Cancel Schedule screen appears. ■■Canadian English: You can block TV programs based on their ■■Digital Caption Options: (Digital channels only)
Self Diagnosis
select in the Date field becomes the start date for your - Channel: If you have selected TV, select the desired channel. 3. Press the ◄ or ► button to select an icon (Videos, Music,
Anglophone Canadian ratings. ■■Picture Test: Use to check for picture problems. If the problem Photos, Settings), and then press the ENTERE button.
scheduled viewing. For Everyday, the TV will turn on 4. Select OK, and then press the ENTERE button. ❑❑ Setting the Time - Music/Photo: If you have selected USB, follow these steps to ■■Canadian French: You can block TV programs based on their
Size: Options include Default, Small, Standard and Large. The
appears in the test picture, select Yes and follow the directions ✎✎ Media Play might not work properly with unlicensed
every day, at the time you selected, starting from that ■■Information: Display the information for a show or channel you select a folder containing MP3 (Music) or JPEG (Photo) files on default is Standard.
Time French Canadian ratings. on the screen. multimedia files.
date. For Everyweek, the TV will turn on every week, have scheduled. You can also change the schedule Information. the USB device: Font Style: Options include Default and Styles 0 to 7. The
✎✎ The time you set will appear when you press the INFO ■■Downloadable U.S. Rating: Parental restriction information can default is Style 0. ■■Sound Test: Use the built-in melody sound to check for sound ✎✎ Need-to-Know List before using Media Play (USB)
on the same day of the week as the start date you 1. Select the Programmed List icon on the left side of the ✎✎ The maximum displayed number of files, including sub be used while watching DTV channels. problems. If the problem occurs during the test, select Yes and xxThe file system supports FAT16, FAT32 and NTFS.
selected, at the time you selected, from that day on. If Channel List screen, and then press the ENTERE button. button. folders, in one folder of USB storage device is 2000. Foreground Color: Options include Default, White, Black, Red,
you select Once, the TV will turn on once, on the date Locking/Blocking Programs or Movies Green, Blue, Yellow, Magenta and Cyan. You can change the follow the directions on the screen. xxCertain types of USB Digital camera and audio devices may not
2. On the Programmed List screen, select the show or channel ■■Clock: Set the clock so you can use the various timer features ✎✎ The media may not be playing smoothly when using the color of the letters. The default is White. ■■Signal Strength: (Digital channels only) An HD channel’s be compatible with this TV.
and time you selected. of the TV. device lower than USB 2.0. You lock or block programs and/or movies in essentially the same xxMedia Play only supports USB Mass Storage Class (MSC)
entry you want information for, and then press the TOOLS reception quality is either perfect or the channels are unavailable.
5. Press the ENTERE button on your remote when done. ✎✎ If you disconnect the power cord, you have to set the way for each option. Each option displays a grid or table. All the Background Color: Options include Default, White, Black, Red, devices. MSC is a Mass Storage Class Bulk-Only Transport
button. The Tools Menu appears. 1. Use the ◄/► buttons to move to the field under Music Adjust your antenna to increase signal strength. device. Examples of MSC are Thumb drives and Flash Card
clock again. tables have ratings listed on the left. The TV Parental Guidelines Green, Blue, Yellow, Magenta and Cyan. You can change the
✎✎ Only Added Channels can be scheduled. 3. Select Information, and then press the ENTERE button. or the field under Photo, and then press the ENTERE ■■Reset: Reset all settings to the factory defaults. Readers. Devices should be connected directly to the TV’s USB
option also has kinds of content listed across the top: ALL: Lock all background color of the captions. The default is Black.
To set the clock, follow these steps: button. The TV displays a single folder (the Root folder) port. USB HDD is not supported.
✎✎ Scheduled programs and channels are displayed in the
The Time Viewing Information screen appears.
TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation Foreground Opacity: This adjusts the opacity of text. Options ✎✎ The PIN input screen appears before the setup screen.
4. Select Change Info and press the ENTERE button to 1. Select Setup >Time > Clock. and the type or name of the device.
include Default, Transparent, Translucent, Solid and Flashing. ✎✎ Enter your 4-digit PIN. Change the PIN using the Change x x Before connecting your device to the TV, please back up your
Programmed List. / L: Adult Language / D: Sexually Suggestive Dialog. files to prevent them from damage or loss of data. SAMSUNG is
change information, or select Close and press the ENTERE 2. Press ENTERE and select Auto or Manual, and then press 2. Press the ENTERE button. A list of folders on the device Background Opacity: This adjusts the opacity of the caption PIN option.
To lock/block movies or shows with certain ratings and/or kinds of not responsible for any data file damage or data loss.
✎✎ When you select a digital channel, press the ► button to button to close the Information screen. ENTERE again. appears. background. Options include Default, Transparent, Translucent, xxA USB device that requires high power (more than 0.5A) may not
view the digital program list. If you highlight a program in ✎✎ If there are no folders on your device, press the content, click the square next to the rating and/or under the kind of
Solid and Flashing. Software Upgrade be supported.
■■Select All / Deselect All: You can select or deselect all channels If you selected Auto: content. A lock appears. To unlock/unblock, click the square again.
the list, and then press the ENTERE(Schedule) button, Yellow select button to select the Root folder, and Return to Default: This option sets each Size, Font Style, Software Upgrade can be performed by downloading the latest xxDo not disconnect the USB device while it is loading.
in the channel list. The TV will automatically download the correct time from a When you click a low rating, all the ratings above it will also display
you set Timer Viewing for that program directly. then press the RETURN button. The Timer screen firmware from [Link] to a USB memory device.
digital channel. locks. You can also Allow All or Lock All. When done, press the Foreground Color, Background Color, Foreground Opacity and xxThe higher the resolution of the image, the longer it takes to
■■Channel Name Edit: Analog channels only. Lets you assign a re-appears. Background Opacity to its default. display on the screen.
RETURN button on your remote. HD Connection Guide
name of up to five characters to an analog channel. For example, • Select Time Zone, and then press the ENTERE button. 3. Use the ▲/▼ buttons to highlight a folder that contains ✎✎ Digital Caption Options are available only when you can xxThe maximum supported JPEG resolution is 15360 x 8640 pixels.
Hist, Food, Golf, etc. This makes it easier to find and select a Use the▲/▼ buttons to select your Time Zone, and then ■■Change PIN: The Change PIN screen will appear. Choose any Refer to this information when connecting external devices to the xxIf a file is corrupted or the TV does not support the file type, the
music or photos, and then press the Yellow select button select Default and Service1 ~ Service6 in Caption Mode.
channel. press ENTERE. 4 digits for your PIN and enter them in Enter New PIN fields. TV. “Not Supported File Format” message appears.
to select the folder.
Re-enter the same 4 digits in Confirm New PIN fields. When the ✎✎ The Foreground and Background cannot be set to the
■■Select All: Select all the channels in the displayed channel list. • Select DST (Daylight Savings Time), and then press 4. Press the RETURN button. The Timer screen re-appears. same color. xxThe TV cannot play MP3 files with DRM that have been
■■Deselect All: Deselect all the selected displayed channels. ENTERE. Select On if you want to turn the DST
Change PIN screen disappears, press the OK button. The TV Contact Samsung downloaded from a for-pay site. Digital Rights Management
■■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, has memorized your new PIN. (DRM) is a technology that supports the creation, distribution,
✎✎ You can only select Deselect All when one or more adjustment on and off manually. Select Off to turn off the
Sat~Sun or Manual. If you select Manual, you can select the ✎✎ If you forget the PIN, press the remote-control buttons in
View this information when your TV does not work properly or and management of digital content in an integrated and
channels are selected. DST adjustment. Select Auto if you want the TV to adjust when you want to upgrade the software. You can find information comprehensive way, including protecting the rights and interests
to DST automatically. Press ENTERE when done. days you want to activate the timer by using the ◄/► buttons the following sequence, which resets the pin to “0-0-0-0” : regarding our call centers and how to download products and
■■Auto Program: See Auto Program under Memorizing Channels. of content providers, preventing illegal copying of contents, and
to highlight the day, and then pressing the ENTERE button. POWER (off) → MUTE → 8 → 2 → 4 → POWER (on) software. managing billing and settlements.
✎✎ DST and Time Zone function are only available when To unselect a day, highlight it, and then press the ENTERE
the Clock Mode is set to Auto. button.
When you finished making all your selections on the Timer screen,
press either the ENTERE or RETURN button.

-5- -6- -7- -8-

[UH4005-ZA][Link] 1 2014-06-25 [Link]

 xxPTP devices are not supported. yySupported Subtitle Formats Video Decoder Photos Media Play - Additional Functions ✎✎ NOTE Kensington Lock Display Modes (HDMI/DVI Input)
xxIf an over-power warning message is displayed while you are -- External ■■Videos/Music/Photos Play Option menus xxStandard dimensions for wall mount kits are shown in the table The Kensington Lock is not supplied by Samsung. It is a device Optimal resolution: 1366 x 768@60Hz
connecting or using a USB device, the device may not be Supports up to H.264, Level 4.1 Normal [Link] 1024x768 2010/2/1 3/15
below.
recognized or may malfunction. Name File extension When playing a file, press the TOOLS button. used to physically fix the system when using it in a public place. Horizontal Vertical Pixel Clock Sync
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are xxWhen purchasing our wall mount kit, a detailed installation Refer to the manual provided with the Kensington Lock for additional Mode Resolution Frequency Frequency Frequency Polarity
1366 x
xxIf the TV has no input during the time period set in Auto MPEG-4 timed text .ttxt
not supported. manual and all parts necessary for assembly are provided. (KHz) (Hz) (MHz) (H / V)
768

Protection Time, the Screensaver will run. information on proper use.

SAMI .smi
MPEG4 SP, ASP :
Category Operation Videos Music Photos
xxDo not use screws that do not comply with the VESA standard IBM
640 x 350 31.469 70.086 25.175 +/- c
xxThe power-saving mode of some external hard disk drives may SubRip .srt Title You can select another video file
c screw specifications. ✎✎ Please find a “K” icon on the rear of the TV. The Kensington 720 x 400 31.469 70.087 28.322 -/+ c
640 x 480 35.000 66.667 30.240 -/-
be released automatically when your connect them to the TV. – Below 1280 x 720: 60 frame max to play directly.
xxDo not use screws that are longer than the standard dimension slot is beside the “K” icon.
c
SubViewer .sub MAC 832 x 624 49.726 74.551 57.284 -/-
xxIf you use a USB extension cable, the TV may not recognize the Repeat Mode You can play movie and music or do not comply with the VESA standard screw specifications.
c

USB device or may not be able to read the files on the device. Micro DVD .sub or .txt – Above 1280 x 720: 30 frame max
files repeatedly. c c
Screws that are too long may cause damage to the inside of the
✎✎ The position and color may differ depending on the model. 1152 x 870
640 x 480
68.681
31.469
75.062
59.940
100.000
25.175
-/-
-/- c
xxIf a USB device connected to the TV is not recognized, the list of SubStation Alpha .ssa H.263 is not supported. You can adjust the picture size to TV set.
Assembling the Cable manager
640 x 480 37.861 72.809 31.500 -/- c
Picture Size c
files on the device is corrupted, or a file in the list is not played, Advanced SubStation Alpha .ass GMC is not support. E Pause L Previous/Next T Tools R Return your preference. xxFor wall mounts that do not comply with the VESA standard 640 x 480
800 x 600
37.500
37.879
75.000
60.317
31.500
40.000
-/-
+/+
c
c
connect the USB device to a PC, format the device, and check screw specifications, the length of the screws may differ
the connection. -- Internal Audio Decoder 1. In the Media Play menu, press the ◄ or ► button to select
SUM
Picture Mode You can adjust the picture setting. c c 800 x 600 48.077 72.188 50.000 +/+ c
depending on the wall mount specifications. 800 x 600 46.875 75.000 49.500 +/+ c
xxIf a file you deleted from the PC is still found when you run Media Photos, then press the ENTERE button. Sound Mode You can adjust the sound setting.
Name Container Format Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO c c c xxDo not fasten the screws too firmly. This may damage the 1024 x 768 48.363 60.004 65.000 -/- c
Play, use the “Empty the Recycle Bin” function on the PC to 2. Press the ◄/►/▲/▼ buttons to select a photo in the file list. You can play the video with product or cause the product to fall, leading to personal injury. 1024 x 768 56.476 70.069 75.000 -/- c
permanently delete the file. Xsub AVI Picture Format WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR Subtitle Subtitles. This function only works Samsung is not liable for these kinds of accidents. 1024 x 768 60.023 75.029 78.750 +/+ c
3. Press the ENTERE button or � (Play) button. c
xxPhotos only supports the sequential jpeg format. SubStation Alpha MKV Text Format mode of WMA Pro is not supported) Setting if the subtitles have the same file
xxSamsung is not liable for product damage or personal injury
VESA DMT 1152 x 864 67.500 75.000 108.000 +/+

xxThe Videos option does not support the scene search and Advanced SubStation Alpha MKV Text Format WMA Lossless is not supported. ✎✎ NOTE name as the video.
when a non-VESA or non-specified wall mount is used or the
1280 x 720
1280 x 800
45.000
49.702
60.000
59.810
74.250
83.500
+/+
-/+
c

thumbnail functions. SubRip MKV Text Format xxWhile a photo list is displayed, press the � (Play) / ENTERE Audio Format You can select the digital audio
c consumer fails to follow the product installation instructions. 1280 x 1024 63.981 60.020 108.000 +/+
xxIf the number of files and folders saved on a USB storage device is MPEG-4 Timed text MP4 Text Format
Music button on the remote control to start a slide show. output format.
xxDo not mount the TV at more than a 15 degree tilt. 1280 x 1024 79.976 75.025 135.000 +/+

over approximately 4000, the files and folders may not appear and xxAll files in the file list section will be displayed in the slide show. Audio You can change the audio xxAlways have two people mount the TV on a wall.
1366 x 768
1440 x 900
47.712
55.935
59.790
59.887
85.500
106.500
+/+
-/+
c
language if the video has more c
some folders may not open. yySupported Video Formats xxDuring the slide show, files are displayed in order. Language than one language. 1600 x 900RB 60.000 60.000 108.000 +/+
xxThe maximum displayed number of files, including sub folders, in File Frame Bit Audio I Love You I Love you
Playlist 3/15
xxDuring the slide show, you can adjust the slide show speed Product TV size in VESA screw hole specs Standard
1680 x 1050 65.290 59.954 146.250 -/+
one folder of USB storage device is 2000. Extension Container Video Codec Resolution Jhon Jhon Stop Slide Quantity 1920 x 1080 67.500 60.000 148.500 +/+
rate(fps) rate(Mbps) Codec Music 1 using (π) (REW) or (µ) (FF) button. Show / Family inches (A * B) in millimeters Screw
xxThe media may not be playing smoothly when using the device DivX3.11 / DivX4
1920x1080 6~30 20Mbps
1st Album
Pop
2010
No Singer
Music 2 xxYou can move to other files using ◄ or ► button. Start Slide
You can start or stop a Slide
Show. c
lower than USB 2.0. / DivX5 / DivX6
✎✎ Media Play can play Music files automatically during a Slide
4.2MB No Singer
MP3 / Music 3 Show LED-TV 40 - 48 200 X 200 M8 4
H264 1920x1080 6~30 20Mbps No Singer
Videos *.mp4 MP4 ADPCM /
01:10 / 04:02 Music 4 Show if Background Music is set to On. Slide Show You can select the slide show
Troubleshooting
VC-1 1920x1080 6~30 20Mbps AAC No Singer c
Speed speed during the slide show.
MJPEG 640x480 6~30 10Mbps
Music 5
No Singer ✎✎ You cannot change the Mode in Background Music until the
Movie [Link] ► [Link] / [Link]
1/1
Background Music file has finished loading. You can set and select Do not install your Wall Mount Kit while If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit
Background
DivX3.11 / DivX4 background music when c
/ DivX5 / DivX6
1920x1080 6~30 20Mbps SUM E Pause L Jump T Tools R Return Music watching a Slide Show. your TV is turned on. It may result in [Link], then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
MP3 / AC3 yySupported Photo Formats
"*.avi "AVI MPEG 1/2/4 1920x1080 6~30 20Mbps / LPCM /
1. In the Media Play menu, press the ◄ or ► button to select personal injury due to electric shock.
*.mkv" MKV" ADPCM / You can zoom into images in full
Image Photo Resolution Zoom c Problem Possible Solution
H264 1920x1080 6~30 20Mbps DTS
Music, and then press the ENTERE button. screen mode.
MJPEG 640x480 6~30 10Mbps
Base-line 15360 x 8704 You can rotate images in full Flickering and Dimming If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the JPEG Rotate c
DivX3.11 / DivX4
1920x1080 6~30 20Mbps MP3 / AC3
Progressive 1024 x 768
screen mode. Securing the TV to the Wall features like the Eco Sensor or the Energy Saving feature. Follow the steps below with your remote to turn these
"*.asf
/ DivX5 / DivX6 / LPCM / file list. You can see detailed information
features off or on.
ASF ADPCM Information
*.wmv" MPEG 1/2/4 1920x1080 6~30 20Mbps c c c yy Energy saving : Menu → Setup → Eco Solution → Energy Saving →Select Settings
/ WMA /
WMA Pro
3. Press the ENTERE button or � (Play) button. Other Restrictions about the played file. Caution: Pulling, pushing, or climbing onto the TV
E Pause L Jump T Tools R Return H.264 1920x1080 6~30 20Mbps
✎✎ During music playback, you can search using the ◄ and may cause the TV to fall. In particular, ensure that your
SUM

yy CMYK, YCCK Color space JPEG are not supported. Component Connections / If you find that the color on your Samsung television’s screen is not correct or black and white, first run a Self
"*.ts
1. In the Media Play menu, press the ◄ or ► button to select *.trp
MPEG2 -TS 1920x1080 6~30 20Mbps AC3 / AAC
► button. children do not hang over or destabilize the TV; doing Screen Color Diagnosis Test on the TV to make sure there are no device issues.

Other Information
TS / MP3 /
Videos, and then press the ENTERE button. *.tp
H. 264 1920x1080 6~30 20Mbps DD+
✎✎ � (REW) and μ (FF) buttons do not function during Playing Multiple Files so may cause the TV to tip over, resulting in serious yy Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
*.m2ts"
play. injuries or death. Follow all safety precautions provided yy If the test is ok, try making sure ;
2. Press the ◄/►/▲/▼ buttons to select a video in the file list. ■■Playing selected video/music/photo files
"*.dat
*.mpg
MPEG1 1920x1080 6~30 20Mbps AC3 /
MPEG /
✎✎ Media Play only displays files with MP3 and PCM file Installing the Wall Mount Kit on the included Safety Flyer. For added stability, install
yy Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have
3. Press the ENTERE button or � (Play) button. *.mpeg
PS MPEG2 1920x1080 6~30 20Mbps
LPCM / 1. On the File List screen, highlight a file, and then press the Yellow the anti-fall device for safety purposes, as follows.
extension. Other file extensions are not displayed, even if they The wall mount kit (sold separately) allows you to mount the TV on used the AV Out jack on your video source.
-- The file name is displayed on the top of the screen with the *.vob" H. 264 1920x1080 6~30 20Mbps AAC
button on your remote. the wall.
playing time. MPEG 1/2/4 1920x1080 6~30 20Mbps are saved on the same USB device. To prevent the TV from falling yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
2. Repeat Step 1 to select multiple files. For detailed information about installing the wall mount, see Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the
✎✎ If the sound is abnormal when playing MP3 files, adjust the
*.3gp 3GPP MP3
-- If video time information is unknown, playing time and the
H.264 1920x1080 6~30 20Mbps
✎✎ NOTE the instructions provided with the wall mount items. Contact a ✎✎ Since the necessary brackets, screws, and string or cable are video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
progress bar are not displayed. flash H.264 1920x1080 6~30 20Mbps Equalizer in the Sound menu. (An over-modulated MP3 file technician for assistance when installing the wall mount bracket. not supplied, please purchase these separately.
*.flv
formats Sorenson H.263 1920x1080 6~30 20Mbps
MP3
may cause a sound problem.) xxA c mark appears to the left of the selected files. Samsung Electronics is not responsible for any damage to the 1. Insert the screws into the wall brackets and firmly fasten them to
Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
-- During video playback, you can search using the ◄ and xxTo cancel a selection, press the Yellow button again. product or injury to yourself or others if you elect to install the wall the wall. Make sure the screws are firmly fixed to the wall.
you should check before calling for a repair.
► buttons. Other Restrictions xxTo deselect all selected files, press the TOOLS button, select mount on your own.
✎✎ We strongly recommend you drive the screws into a stud.
yy Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go to “Picture” in the Menu, and then
try adjusting these options.
✎✎ In this mode, you can play movie clips contained in a game, yyVideo content will not play, or not play correctly, if there is an Deselect All, and then the ENTERE button. Wall Mount Kit Specifications (VESA)
but you cannot play the game itself. 2. Using screws, insert the screws through the TV brackets, and Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
error in the content or the container. 3. Press the TOOLS button, select Play Selected Contents, and ✎✎ The wall mount kit is not supplied, but sold separately. then fasten the screws to the top VESA screw holes on the back friendly No Signal Power Off feature.
yySound or video may not work if the contents have a standard then press the ENTERE button. of the TV.
Install your wall mount on a solid wall perpendicular to the floor. First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
bit rate/ frame rate above the compatible Frame/sec listed in the ■■Playing a video/music/photo folder When attaching to other building materials, please contact your 3. Connect the brackets on the TV and the brackets on the wall knowing that it will turn off after a certain period of time and not waste energy.
Supported Video Formats table. nearest dealer. If you install the TV on a ceiling or slanted wall, it with a strong string or cable, and then tie the string or cable
1. With the folders on your USB device displayed, use the tightly to the brackets. yy Sleep Timer : User Menu → Setup → Time → Sleep Timer
yyIf the Index Table erroneous, the Seek (Jump) function is not may fall and result in severe personal injury.
◄/►/▲/▼ buttons to highlight a folder. ✎✎ Verify all connections are properly secured. Periodically check If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
supported.
2. Press the TOOLS button, select Play Folder, and then press the the connections for any sign of fatigue or failure. If you have yy No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
yyThe menu may take longer to appear if the video’s bit rate any doubt about the security of your connections, contact a
ENTERE button. professional installer. yy Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
exceeds 10Mbps.
yyVideo content can not be played if there are many contents in ✎✎ Install the TV close to the wall so that it does not fall.
one file. ✎✎ Connect the string or cable so that the brackets on the wall
are at the same height or lower than the brackets on the TV.
Untie the string or cable before moving the TV.
✎✎ To purchase a TV Holder kit, contact Samsung customer
care.

-9- - 10 - - 11 - - 12 -

Storage and Maintenance

Trouble Powering On Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button
on the TV or remote and the light should blink about 5 times before the TV turns on.
There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
Specifications
If you find that you are having trouble powering on your Samsung television, there are a number of things to check it input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. ✎✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching
before making a call to the service department. • Make sure your connected devices are powered on.
the TV.
Environmental Considerations
yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you • Be sure to select the correct input source by pressing the SOURCE button on the remote control. ✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using Operating Temperature 50°F to 104°F (10°C to 40°C)
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your • Reboot the connected device by reconnecting the device’s power cable. a soft cloth to prevent scratches. Operating Humidity 10% to 80%, non-condensing
keyboard or move the mouse. Then try turning your TV on. Storage Temperature -4°F to 113°F (-20°C to 45°C )
RF (Cable/Antenna) Connection
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If Clean the product with a soft cloth Storage Humidity 5% to 95%, non-condensing
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a The TV is not receiving all channels. • Make sure the coaxial cable is connected securely. Do not spray water directly onto the
dampened with in a small amount of Model Name UN40H4005AF UN48H4005AF
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite • Run Auto Program to add available channels to the channel list. product. Any liquid that goes into the
box remote control. If the screen displays the guide or info data, the problem is caused by the box. water. Do not use a flammable liquid
go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set product may cause a failure, fire, or 1366 x 768
in the menu. There are 3 options. (STD, HRC and IRC) (e.g. benzene, thinners) or a cleaning Display Resolution
Stand Assembly • If you have any trouble assembling the stand, refer to “Install the Stand” in the Start Up or Stand Installation Guide. electric shock.
• Verify the antenna is positioned correctly.
agent.
Screen Size 40" Class 48" Class
Cannot find a channel • Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1. (Diagonal) (40.0" measured diagonally) (47.6" measured diagonally)
Poor Picture First, perform the Picture Test and to see if your TV is displaying the test image properly. License
• Some channels may not have caption data. Sound
Go to MENU - Support - Self Diagnosis - Picture Test 10W x 2
If the test image is properly displayed, the poor picture may be caused by the source or signal. The picture is distorted: macroblock, • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in DivX Certified® to play DivX® video up to HD 1080p, including premium content. Output
error, small block, dots, pixelization. sports and action movies. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
The TV image does not look as good as • If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to Dimensions (W x H x D) 35.9 x 21.5 x 3.5 inches 42.6 x 25.1 x 3.5 inches
it did in the store. deliver HD (high definition) picture quality. • A weak signal can cause picture distortion. This is not a TV problem. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit Body (914.2 x 547.9 x 90.9 (mm)) (1083.2 x 637.8 x 90.9 (mm))
• Cable/Satellite subscribers: Try HD channels from the channel line up. Others divx. com for more information and software tools to convert your files into DivX videos. 35.9 x 23.0 x 7.7 inches 42.6 x 26.6 x 8.0 inches
With stand (914.2 x 586.4 x 196.4 (mm)) (1083.2 x 677.0 x 203.9 (mm))
• Air/Cable Antenna connection: Try HD channels after running Auto Program. Purple/green rolling horizontal bars and • Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased
✎✎ Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up buzzing noise from the TV speakers with top-box has a grounding issue. Replace the Component video cables with an HDMI connection. DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your Weight
scaled SD content is low. Component cable connection. device setup menu. Go to [Link] for more information on how to complete your registration. Without Stand 15.4 lbs (7.0 Kg) 20.0 lbs (9.1 Kg)
• Adjust the Cable/Set top box video output resolution to 1080i or 720p. With Stand 16.7 lbs (7.6 Kg) 21.8 lbs (9.9 Kg)
The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are
The picture is distorted: macroblock • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in • Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the used under license.
error, small block, dots, pixelization. sports and action movies. TV.
✎✎ Design and specifications are subject to change without prior notice.
• A weak signal can cause picture distortion. This is not a TV problem. • Adjust the picture size option on your external device or change the TV to full screen.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 ✎✎ This device is a Class B digital apparatus.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels. ✎✎ For information about the power required and more about power consumption, refer to the label attached to the product.
The remote control does not work. • Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct . Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby ✎✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.
Color is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the correct jacks. • Clean the transmission window located on the top of the remote control. Laboratories.
Incorrect or loose connections may cause color problems or a blank screen.
• Try pointing the remote directly at the TV from 5~6 feet away.
✎✎ Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.
[Link]/recyclingdirect or call, (877) 278-0799.
There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness) The cable/set top box remote control • Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
For DTS patents, see [Link] Manufactured under license from DTS Licensing Limited. DTS,
• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving ) does not turn the TV on or off, or adjust the SAMSUNG TV code. the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark ■■JACK PANEL DETAIL / REAR VIEW
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset) the volume. of DTS, Inc. © DTS, Inc. All Rights Reserved.
There is a dotted line on the edge of • If the picture size is set to Screen Fit, change it to 16:9. A “Mode Not Supported” message • Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201,
the screen. • Change the cable/satellite box resolution. appears. resolution settings in this manual. 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474,
4
7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & 1
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1 Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
on the TV.
DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Component. 5
6
When changing channels, the picture • If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It • Caption must be activated on the external device. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or 2
freezes or is distorted or delayed. may take up to 20 minutes)
There is a plastic smell from the TV. • This smell is normal and will dissipate in a few days. registered trademarks of HDMI Licensing LLC in the United States and other countries.
3
• Set the output resolution of the cable box to 1080i or 720p.
TV Signal Strength is unavailable in the • This function is only available for digital channels received through an Antenna / RF/Coax connection. Open Source License Notice
Sound Problems Perform the Sound Test to confirm that your TV audio is properly operating. Self Diagnosis Test menu.
(go to MENU - Support - Self Diagnosis - Sound Test) Open Source used in this product can be found on the following webpage. ([Link] Open Source License (Unit: inches)
TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it. Notice is written only English.
If the audio is OK, the sound problem may be caused by the source or signal. Model name 1 2 3 4 5 6
The Channel menu is grey out • The Channel menu is only available when you select the TV source.
There is no sound or the sound is too • Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV. UN40H4005AF 10.3 8.7 6.1 7.8 7.8 22.7
(unavailable).
low at maximum volume. To send inquiries and requests for questions regarding open sources, contact Samsung via Email ([Link]@[Link]). UN48H4005AF 12.2 12.1 7.7 7.8 7.8 26.0
The picture is good, but there is no • If you are using an external device, check the device’s audio output option Ex. you may need to change your Your settings are lost after 30 minutes or • If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
■■ This product uses some software programs which are distributed under the Independent JPEG Group. NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing
sound. cable box’s audio option to HDMI if the box is connected to your TV using an HDMI cable. every time the TV is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select
TV mode, go to MENU → Setup → Plug & Play → ENTERE. ICU License - ICU 1.8.1 and later installation of your TV. Not responsible for typographical or printed errors.
• Reboot the connected device by reconnecting the device’s power cable. © 2014 Samsung Electronics America, Inc
COPYRIGHT AND PERMISSION NOTICE
The speakers are making an • Check the cable connections. Make sure a video cable is not connected to an audio input. You have intermittent loss of audio or • Check the cable connections and reconnect them.
inappropriate noise. video. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software
• Perform the Sound Test as explained above.
connectors. without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to
No Picture, No Video whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the
You see small particles when you look • This is part of the product’s design and is not a defect.
above copyright notice(s) and this permission notice appear in supporting documentation.
The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV. closely at the edge of the frame of •
• Make sure the wall outlet is working. the TV. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
• Try pressing the POWER button on the TV to make sure the problem is not the remote. POP (TV’s internal banner ad) appears • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup). HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
If the TV turns on, refer to ‘Remote control does not work’ below. on the screen. DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu. ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
• If your PC is connected to the TV, check your PC power settings. ✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software
• Make sure the AC power cord is plugged securely into the wall outlet and the TV. be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. without prior written authorization of the copyright holder.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes ✎✎ Watch these troubleshooting on video at [Link]/spsn. All trademarks and registered trademarks mentioned herein are the property of their respective owners.
if there is no signal.
✎✎ Some functions and pictures shown in this manual are available on specific models only.
✎✎ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site ([Link]
→ Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.

- 13 - - 14- - 15 - - 16 -

[UH4005-ZA][Link] 2 2014-06-25 [Link]