Ordering Information
Request A Quote for Volume Prices, Non-Standard Sizes, Materials, Durometers, Colors.....
Materials General Properties Common Applications
Good resistance to petroleum, hydrocarbons, fuels. Petroleum Oil Seals
Widely used with most oils, hydraulic fluids, alcohol. Hydraulic Fluid Seals
Buna-N Poor resistance to sunlight, weathering and ozone. Water/Greases
(Nitrile / NBR) Many compound variations for specific applications. Transmission Fluid Seals
70 Durometer Black The least expensive most readily available material.
Basic temperature range: -40 F to +250 F*
Excellent temperature and chemical resistance. Vacuum Seals
Viton® Excellent mechanical and physical properties. Many Acids and Fuels Heat Resistance
(Fluorocarbon) Low compression set and low gas permeability. Many Chemicals
75 Durometer Black Not for use with Acetone, Skydrol, or ethyl Acetate. Many Solvents
Basic temperature range: -20 F to +400 F*
Broad temperature range. Odorless / non-toxic. Dry heat
Silicone Resistance to sun and ozone. Fungus resistance. Alcohol / Oxygen
70 Durometer Poor tear and abrasion strength. Electrical / Medical
Red/Orange Poor resistance to oils. Low Temperature
Basic temperature range: -80 F to +400 F*
Resistance to sunlight, weathering and ozone. Steam/Hot water
EPDM/EPR Poor resistance to petroleum oils and fuel. Hydraulic / Skydrol
(Ethylene Propylene) Good heat and compression set resistance. Some Chemicals
70 Durometer Black Basic temperature range: -65 F to +250 F* Auto Brake Systems
Alcohol / Greases
Superior chemical resistance vs. standard Viton®. Chemical Resistance
Viton® ETP Other properties similar to standard Viton®. For use between standard Viton® and Kalrez®
(Viton® Extreme) For use between standard Viton® and Kalrez®
Basic temperature range: -5 F to +400 F*
High temperature and chemical resistance. Click for Specific Compound Info:
Excellent resistance to chemicals. Chemraz®
Chemraz®
Excellent outgassing performance in vacuums. Simriz®
Simriz® Low compression set. Kalrez®
Kalrez® Various compounds for specific applications.
(Perfluoroelastomer) Basic temperature range: -10 F to +600 F*
Simriz® = performance and savings.
Common core materials: Chemical resistance of FEP/PFA with
Silicone, Viton, SS Spring compression set resistant core.
Encapsulated
FEP or PFA Chemical resistance of FEP/PFA with compression set resistant core.
Basic temperature range: Depends on core material.
Excellent temperature range. Temperature Range
Various chemical and fuel resistance. Chemicals / Fuels
PTFE® Low coefficient of friction. Non-elastic
Non-elastic.
Basic temperature range: -250 F to +450 F*
Good resistance to petroleum oils. Refrigeration Seals
Neoprene Low compression set and good abrasion strength.. Freon / Air Conditioning
(Chloroprene) Good resistance to weathering, sunlight and ozone. Motor Mounts
Basic temperature range: -40 F to +225 F* Engine Coolants
Wide range of fluid and chemical resistance. Aircraft fuel systems
Large temperature range. Jet Fuel / Gasoline
Fluorosilicone A blend of Viton® and Silicone. Petroleum Oils
Basic temperature range: -80 F to +350 F* Synthetic Jet Oil
Available in High and Low Grades High Pressure Hydraulics
Urethane Excellent wear/abrasion and extrusion resistance. Drive Belts
(polyurethane)
Poor compression set and chemical resistance.
Basic temperature range: -65 F to +225 F*
Accessories O-Ring Kits, Splicing Kits, Accessories
Click bellow to Order Sizing Cones, Parker O-Lube, Installation/Extraction Tools,
and the ORID(O-Ring Material Identifier Click on the links for details
Aegis® is a registered trademark of Freudenburg-NOK
Kalrez® and Viton® are registered trademarks of DuPont Dow Elastomers.
Chemraz® is a registered trademark of Green Tweed.
[Link]
Back To Library
