NIKKEL ALAPÚ ÖTVÖZETEK
FEDETTÍV HUZALOK (SAW)
Exaton 50SW
Exaton 50SW is a basic agglomerated flux with low silicon pickup. It gives good slag removal, good tie-ins and a finely rippled surface. It is suitable for welding with
either wire or strip electrodes of nickel alloy type. It is particularly suitable for surfacing with Exaton Ni72HP strip electrodes (EQNiCr-3 type). Typical applications for
flux Exaton 50SW are found in nuclear and chemical equipment fields. It is also suitable for dissimilar material welding of nickel alloy grades to stainless steel
grades. Exaton Ni41Cu is used for corrosion resistant alloy surfacing of components in the chemical, pollution control, oil & gas and petrochemical industries and
often in connection with sour gas service. Typical components are tanks, heat exchangers, evaporators, transport pipes and scrubbers etc.
Mszaki leírás
Osztályozások EN ISO 14174 : S A AF 2
Hegesztési áramersség 900 A (Using 60x0.5 mm strip)
Salaktípus Fluoride basic CaF2-Al2O3-(TiO2)-(MnO)
Srség nom: 1.2 Kg/l
Bázikussági index nom: 2.4
Besorolások
Huzal AWS/EN
Exaton Ni41Cu A5.14:ERNiFeCr-1/ 18274:S Ni 8065
Exaton Ni72HP A5.14:ERNiCr-3/ 18274:S Ni 6082 (NiCr20Mn3Nb)
Jóváhagyások
Huzal
*Selected production units only. Please contact ESAB for more information. Visit [Link] to download specific flux/wire combination fact sheets for more details.
Varratfém analízis
C Mn Si S P Ni Cr Mo Cu N
Exaton Ni41Cu
<=0.030 0.8 0.3 <=0.010 <=0.02 40.0 21.5 2.8 2.1 -
Exaton Ni72HP
0.01 3.0 0.4 0.005 0.009 72.0 19.6 0.1 0.02 -
Varratfém analízis
Ti Co Fe Nb+Ta
Exaton Ni41Cu
- - 30.0 -
Exaton Ni72HP
0.15 0.02 1.0 2.2
Huzal összetétel
C Mn Si S P Ni Cr Mo Cu N
Exaton Ni41Cu
<=0.025 1.0 <=0.3 <=0.010 <=0.025 >=42.0 23.0 3.0 2.3 -
Exaton Ni72HP
<=0.03 3.0 0.1 <=0.010 <=0.010 72.5 20.0 <=0.2 <=0.05 <=0.05
Huzal összetétel
Ti Co Fe Nb+Ta
Exaton Ni41Cu
- - >=22.0 -
Exaton Ni72HP
0.4 <=0.10 <=1.0 2.6
[Link]/hegesztanyagok
NIKKEL ALAPÚ ÖTVÖZETEK
FEDETTÍV HUZALOK (SAW)
Exaton 50SW
Jellegzetes mechanikai tulajdonságok
Huzal ?llapot Folyáshatár Szakítószilárdság Szakadási nyúlás Charpy-féle V
vizsgálat
Exaton Ni72HP Hegesztett állapot 320 MPa 600 MPa 40 % 120 J @ 20 °C
110 J @ -196 °C
[Link]/hegesztanyagok
