FOURTH QUARTERLY ASSESSMENT IN TLE

G7-8 - COMPUTER SYSTEM SERVICING (CSS)

SY.2022-2023

NAME: _____________________________ DATE: ___________________

GRADE AND SECTION:______________________ TEACHER:_______________

DIRECTIONS: Read the questions carefully. Choose the letter of the correct answer by circle
of the correct answer.

1.Emily decides to set up her work area in a spare room of her house. She takes out all the
components, such as the motherboard, CPU, RAM, and graphics card, carefully placing them on a
designated surface. However, she realizes she needs to use a specific tool to prevent static
electricity from building up. Which tool should Emily use to ensure that she minimizes the risk of
static discharge during her PC build?
A. Anti-Static Mat C. Anti-Static Wrist Strap
B. Hex Driver D. Wire Cutter
2. Which tool is used to blow away dust and debris from different computer parts without touching the
components?
A. Anti-Static Mat C. Soft Cloth
B. Compressed Air D. Cable ties
3. What is the appropriate action to take if a hand tool is found to be damaged or worn?
A. Replace it immediately
B. Continue using it carefully
C. Repair it yourself
D. It depends on the severity of the damage
4. Sarah, wants to upgrade her computer's CPU cooler to improve its cooling performance. As she
begins the installation process, Sarah notices that the existing cooler is attached to the CPU socket
with screws that have a cross-shaped head. What tool do you think she needed?
A. Flat-Head Screwdriver C. Philips Head Screwdriver
B. Hex Driver D. Torx Screwdriver
5. Which of the following is not classified as a diagnostic tool?
A. Multimeter
B. Loopback plug
C. Punch down tool
D. Network Cable Tester
6. Why is it important to follow proper safety guidelines when using hand tools in computer
maintenance?
A. To prevent accidents and injuries
B. To ensure the task is completed quickly
C. To comply with legal regulations
D. To save money on repairs
7. Which type of computer is typically used for applications that require extensive computational power,
such as weather forecasting or scientific simulations?
A. Supercomputer
B. Mainframe computer
C. Mini computer
D. Workstation
8. Hardware components of a computer are:
A. Intangible and non-physical
B. Instructions that tell the computer what to do
C. Tangible, physical, and mechanical
D. Stored and retrieved electronically
9. Which of the following is an example of hardware maintenance?
A. Writing a document
B. Playing a game
C. Cleaning the computer keyboard
D. Accessing information on the web
10. Which of the following is an example of hardware maintenance?
A. Writing a document
B. Playing a game
C. Cleaning the computer keyboard
D. Accessing information on the web
11. You save an important document on your computer's hard drive for future reference. Which phase
of the information processing cycle does this action represent?
A. Input
B. Process
C. Storage
D. Output
12. Which phase of the information processing cycle is illustrated when a user enters their username
and password to log into a computer system?
A. Input
B. Process
C. Storage
D. Output
13. What should you do to rename an existing Word document?
A. Right-click on the document name and select Rename
B. Press CTRL + R on the keyboard
C. Select File ➪ Save As
D. Select File ➪ Rename
14. Which method would you use to create a new blank document if you prefer using keyboard
shortcuts?
A. Choose File ➪ New from the menu bar.
B. Press CTRL + N on the keyboard.
C. Click the New Blank Document button on the toolbar
D. Select File ➪ Save As.
15. At what level should the eyes be positioned in relation to the top of the monitor? At what level
should the eyes be positioned in relation to the top of the monitor?
A. Lower than the top of the monitor
B. Higher than the top of the monitor
C. Looking down at a steep angle
D. Level at the top of the monitor
16. Workstations are different from personal computers mainly because they:
A. Have more powerful microprocessors
B. Are multi-user systems
C. Can execute complex commands and tasks
D. Are embedded systems
17. You want to change the font style in your Word document. Which tab on the ribbon should you
navigate to?
A. Home
B. Insert
C. Review
D. View
18. What is the keyboard shortcut to save a document?
A. CTRL + N
B. CTRL + O
C. CTRL + V
D. CTRL + S
19. Examples of software include all of the following EXCEPT:
A. Games
B. Monitor
C. Spreadsheets
D. Word processors
20. Which type of storage device is Volatile?
A. RAM
B. ROM
C. Storage drives
D. Floppy disk drive
21. Which type of memory holds data even when the system is switched off?
A. RAM
B. ROM
C. Storage drives
D. Floppy disk drive
22. Find the binary code of 19.
A. 11001 B. 10011 C. 11101 D. 10001
23. How many bits in 11 bytes?
A. 66 B. 77 C. 88 D. 99
24. How many bytes are in a kilobyte (KB)?
A. 100 bytes
B. 1,000 bytes
C. 1,024 bytes
D. 1,048,576 bytes
25. Convert the word Hi into Binary Digits. The code of H is 72 and i is 105.
A. 01001000, 01101001
B. 11001000, 01001001
C. 01001000, 01101010
D. 01101000, 01101101
26. Why is it necessary to convert a decimal number to binary for computer interpretation?
A. Binary is more efficient for storage
B. Binary is easier for humans to understand
C. Computers only understand binary language
D. Decimal numbers are not compatible with computers
27. Tom is following a flowchart to complete the technical drawing lesson. He has reached a point
where he needs to perform a sub-process within the main process. What symbol should Tom look for
to represent the sub-process?
A. Oval
B. Rectangle
C. Rectangle with double lines
D. Rhomboid
28. Which symbol usually used as input or output?
A. Oval
B. Rectangle
C. Rectangle with double lines
D. Rhomboid
29. Elden wants to make a flowchart that determine the truth or falsity of his project. Which of the
following flowcharting forms will he use?
A. Decision Program Flow
B. Sequential Program Flow
C. Looping Program Flow
D. All of the above
30. It is represented by a diamond. A process that can answer a decision of "yes" or "no" requires a
decision box.
A. Arrow lines B. Connector C. Decision D. Process
31.How is a resistor symbol usually drawn?
A. As a straight line
B. As a circle
C. As a rectangle
D. As a resistor with an arrow across it or pointing downward
32. What is the function of a transistor?
A. To reduce current flow
B. To store electrical charge
C. To amplify signals
D. To regulate voltage
33. If you need to bore holes in a plastic or metal chassis, which tool would you use?
A. Soldering Iron
B. Desoldering Tool/Desoldering Pump
C. Portable Electric Hand Drill
D. Flat Screwdriver
34. How would you describe the process of soldering?
A. Joining two or more electronic parts using a soldering iron
B. Cutting unwanted parts or components with a desoldering tool
C. Measuring resistance, voltage, and current with a multimeter
D. Boring holes in a chassis using an electric hand drill
35.In a delicate situation where you need to cut or trim connecting wires in a circuit board without
causing any damage, which tool would be the most suitable choice?
A. Long Nose Pliers
B. Side Cutter Pliers
C. Flat Screwdriver

36. What is the function of this circuit symbol?

A. It is a transducer which converts electrical energy to heat.
B. A safety device which will blow (melt) if the current flowing through it exceeds a specified
value.
C. To pass current very easily from one part of a circuit to another.
D. This symbol provides illumination for example a car headlamp.

37. Which of the following circuit symbol is a transducer which converts electrical energy to sound?

A. B. C. D.

38. You need to make a basic electrical splice using both solid and stranded wires. Which cable
jointing method would be suitable for this scenario?
A. Western Union Short tie
B. Rat-tail Joint
C. Knotted Tap Joint
D. Fixture Joint

39. Which testing method is suitable for evaluating the energy storage capacity of active electronic
components?
A. Passive testing
B. Dynamic testing
C. In-circuit testing
D. All of the Above
40. You are designing an electronic circuit that requires precise control of the current flowing through
a specific section. Which type of electronic component would you choose to fulfill this requirement
without generating voltage?
A. Resistor
B. Diode
C. Transistor
D. Circuit
41.Kayla are designing a circuit and need to incorporate a component that limits the flow of current.
The required resistance value for this component is 10,000 ohms. Which of the following options
represents this resistance value in kilo-ohms?
A. 1 kilo-ohms
B. 100 kilo-ohms
C. 10 kilo-ohm
D. 0.1 kilo-ohm
42. In which type of devices are capacitors commonly used for energy storage?
A. Televisions
B. Microphones
C. Solar panels
D. Electric cars

43.Which term is sometimes used interchangeably with "capacitor"?

A. Transformer
B. Capacitance
C. Condenser
D. Inductor
44. How many terminals does a diode typically have?
A. One
B. Two
C. Three
D. Four
45. Which direction does a diode allow current flow?
A. Both directions
B. Clockwise
C. Counterclockwise
D. Only one direction
46. Which of the following best describes the basic functions of a transistor?
A. It acts as a switch and a resistor.
B. It acts as an amplifier and a capacitor.
C. It acts as a switch and an amplifier.
D. It acts as a resistor and a capacitor.
47. This is a passive two-terminal electrical component that implements electrical resistance as a
circuit element.
A. Resistor
B. Capacitor
C. Diode
D. Transistor
48.Which precaution should be taken to avoid electrical hazards when working with computers?
A. Hold the components on the edges and touch the Integrated Circuit (IC) parts.
B. Make sure that the pins are properly not aligned when connecting a cable connector.
C. You do not need to power off the computer and unplug the computer before working on it.
D. Clean the area before and after using it to maintain sanitation and prevent accidents.
49. You will test a resistor using analog meter, what is the first step that you need to do?
A. Check the result of the pointer point of a analog meter.
B. Look for the resistor color band.
C. Know the resistor value.
D. Place your meter probes to the two points of the resistor.
50. A diode terminal that is a positive electrode and the point of exit of electrons.
A. Cathode
B. Anode
C. AC Voltage
D. DC Voltage