Actuator LA10 system

Data sheet

LINAK.COM/HOMELINE
LA10 system

The LA10 system consists of one or more Linear Actuators

LA10, a Bluetooth® dongle, a control unit, and a charging
point. The solution is designed for adjustable recliner chairs
and meets user requirements for reduced number of cables
in the system. A Bluetooth® dongle ensures the wireless
connection to the control unit, which is a wireless control
placed in a bracket. To complete the design, the charging
point is available in different versions. The entire system is
designed to meet user preferences and to fit the elegant
design of modern living-room furniture. In the newest system,
the Battery BA002 offers a powerful solution without a
permanent cable to the application.

Features: Options:
• 18 to 31 V DC supply with DC cable • Various pre-set back fixture directions (0°, 45°, 90°, or 135°)
• Max load
- Push: 3500 N Usage:
- Pull: 2500 N • Duty cycle: 10 % ≈ 1 minutes at continuous use followed by
• Max. speed: 16 mm/s 9 minutes pause
• Compact design • Ambient temperature: 5 to 40 °C
• Stroke length: max. 150 mm • Storage and transportation temperature: -10 to +50 °C
• Installation dimension: stroke + 128 mm • Compatible with SMPS001 and SMPS006
- Maximum tolerance: 1 mm • Complies with EN 60335-1
• Adjustable BID
- Up to 2 mm longer
• Colour: Black (RAL 9005)
• PVC-Free™

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks and logos by LINAK A/S is under license.

LINAK.COM/HOMELINE
Bluetooth® dongle BLE2DC
In case you have an LA10 system without battery, the Bluetooth®
dongle BLE2DC is the “brain” of your system and allows you to
adjust your product wirelessly from an app or a Bluetooth® hand
control. Simply plug the BLE2DC into one of the actuators and
pair your device to the system.
The BLE2DC is a very compact unit requiring a minimum of space.
No mounting is needed, just plug in the adapter and you are
ready.
BLE2DC

Features:
• Bluetooth® Low Energy Technology (Version 4.0 of
the Bluetooth® specification) Usage:
• Compact • Compatible with HOMELINE® wireless hand controls
• Simple plug-in, no mounting required • Ambient temperature: 5 to 40 °C
• Easy pairing • Storage and transportation temperature: -10 to +50 °C
• PVC-free™ • Complies with EN 60335-1

Control Unit BP10

The Control Unit BP10 product series is designed
for the control of recliner chairs with the LA10
system. The control unit is a small hand-held
control which can optionally be placed in a
bracket in the recliner chair and used as a panel.
The control unit is available in three different
version - BP11, BP12 and BP13 - controlling 1, 2
or 3 channels, respectively.
The Control Unit BP10 product series combines
ergonomic design and functionality into a user-
friendly control with intuitive buttons.

BP11 BP12 BP13 BP10 bracket

Features:
• Hand control controlling up to three channels
• Ergonomic and elegant design
• Magnetic
• Intuitive use
• Exchangeable CR2032 battery
• PVC-Free™
• Supports sleep mode *
Usage:
Options: • Ambient temperature: 5 to 40 °C
• Customised silk screen print on cover • Storage and transportation temperature: -10 to +50 °C
• Customised colour • Compatible with all HOMELINE® products with integrated Bluetooth®
• Customised logo on battery cover • Complies with EN 60335-1

* Sleep mode:
When no key is pressed, the handset will enter sleep mode 5 seconds after last operation. If a key (or a key combination) is pressed
for more than 2 minutes, the remote enters power-saving mode even if the remote at that time is connected to a system. When this
happens, the remote will disconnect from the system (if connected) and enter a power-saving mode where the keys are scanned
every 500 ms for changes (the remote is sleeping the rest of the time). This is done to conserve power if a key becomes stuck
during transportation. The power-saving mode is left when all keys are released.
Charging Point CP001/CP002/CP003
The Charging Point CP001/002/003 is the connection between power Features:
and your application. It is designed to fit into all designs and comes in • Three versions: Simple, Basic, and Magnetic
three different versions. • Easy to mount, no screws required
• LED light indicator (CP002 and CP003)
The CP001 is a simple cable with a jack plug that gets connected
• PVC-Free™
directly to the power cable. This charging point is very discreet and
compact.
Options:
The CP002 also comes with a jack plug and has a light indicator that • Safety release cable (for CP001 and CP002)
lights up when the system is connected to power. • Different charging point options
The CP003 is a magnetic charging point that has a light indicator which
lights up when the system is connected to power. The magnetic function Usage:
protects the application by snapping apart if the charging cable is being • Compatible with SMPS001/006
pulled. • Ambient temperature: 5 to 40 °C
• Storage and transport temperature: -10 to +50 °C
The Charging Points CP001, CP002 and CP003 are designed for an • Complies with EN 60335-1 (CP001 and CP002)
intuitive use when connecting your application to power.
A safety release cable is optional for CP001 and CP002. It protects the
application by snapping apart if the charging cable is being pulled.

CP001 CP002 CP003

Ordering example:

LA10 040 100 00 00 0 B 0 0 - 228 1 2 2 0 01 0 0 0 0

Option: 0 = Standard

Fire category: 0 = VO

Cable information: 0 = No cable

Dongle: 0 = No dongle

Configure software: 0B = Special configuration ¹

Brake: 0 = No brake

Piston Rod Eye: 1 = Plastic with slot Ø8.2

2 = Plastic with slot Ø10.2

Back Fixture hole: 1 = Slot Ø8.2

2 = Slot Ø10.2
3 = Slot Ø12.2

Back Fixture direction:* 1 = Standard 00

2 = Turned 900
3 = Turned 450
4 = Turned 1350

Installation dim.:** XXX = xxx mm (min. 153; max. 278)

Colour: - = Black (RAL 9005)

IP: 0 = Standard

Option: 0 = Standard

Motor Type: B = 24 V DC

Platform: 0 = Standard

Feedback: 00 = Double Hall

Option: 00 = Standard

Stroke Length: XXX = xxx mm (Installation dim. - 128 mm)

Spindle pitch: 040 = 4 mm

060 = 6 mm

Actuator type: 10 = LA10

¹ : Remember to attach a configuration file when ordering a special item via system spec.
* : See photos below
** : See table below

0° 45° 90° 135°

Additional items for the LA10 system

Name Item number Description

BLE2DC BLE2DC000 Bluetooth® dongle
BP11 BP11BL0000 Control unit, 1 channel
BP12 BP12BL0001 Control unit, 2 channels
BP13 BP13BL0000 Control unit, 3 channels
MB001 Bracket with metal plate
Bracket for BP10
MB002 Metal plate for under-cover mounting
CP001-0500 Simple charging point with Jack connector; length 500 mm
Charging point CP002-0500 Basic charging point with Jack connector and light; length 500 mm
CP003-0500 Magnetic charging point with magnetic connector and light; length 500 mm
Battery box BA002 Standard version
Bracket for BA002 BA002_bracket Mounting bracket for easy mounting/demounting of BA002

Cables for the LA10 system

Name Item number Description Length

Safety release cable CAB1059W7007 Black 250 mm
Connection cable 0965362-400 Black; 2-pole mini-fit cable with angle plug in both ends 400 mm
Connection cable 0965362-800 Black; 2-pole mini-fit cable with angle plug in both ends 800 mm
Charging cable for CP001/CP002 CAB1059W7010 Black 2500 mm
CAB1059W7012 Black; angled 2500 mm
Charging cable for CP003
CAB1059W7014 Black; straight 2500 mm

SMPS

SMPS001 = 230 V version

SMPS006 = Universal input 100 to 240 V version
Dimensions

Linear Actuator LA10

 Bluetooth® dongle BLE2DC

67.5

Drawing No.: 1036W4000

11.4

22
134.3
25.8 99
8.9 24
13

R2
6.2

6.2
60
25

20
BLE2DC dimensions (mm)

49 36.5
79.2

12.8 11

10.2 0.1 10.2 0.1

BID=S+128

BLE2DC mounted in the LA10

eated By Bjarne Skov 2020-10-01
odified By Bjarne Skov 2020-10-01

45
32.7
22
Control Unit BP10

BP11 dimensions (mm)

BP12 dimensions (mm)

 SECTION A-A
4

4.6
1.3

11.6
7.5 45.4
63
31
BP13 dimensions (mm)
A A

Bracket for BP10

125.4
108

143
Created By Bjarne Skov 2020-10-05
Modified By Bjarne Skov 2020-10-06
Charging Point CP002/CP003

CP002 dimensions (mm)

CP003 dimensions (mm)

Copyright © LINAK 2021.11 . MA M9-02-877-E . Chapter 5.10

LINAK® accepts no responsibility for possible errors or inaccuracies in catalogues, brochures, and other material. LINAK reserves the
right to change its products without prior notice. LINAK cannot guarantee product availability and reserves the right to discontinue
the sale of any product. The user is responsible for determining the suitability of LINAK products for a specific application. All sales are
subject to the ‘Standard Terms of Sale and Delivery’, available on LINAK websites.

LINAK and the LINAK logotype are registered trademarks of LINAK A/S. All rights reserved.

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER MANUAL