Mx16 Course Introduction – 1 Shift

CT3835 – Mx16

Philips Healthcare Academy

Rev. 04 July 2010
CSIP Level 1 - Proprietary Notice
This document and the information contained in it is proprietary and confidential information of Philips Healthcare (("Philips")
Philips ) and may not be reproduced,
copied in whole or in part, adapted, modified, disclosed to others, or disseminated without the prior written permission of the Philips Legal Department.
Use of this document and the information contained in it is strictly reserved for current Philips personnel and Philips customers who have a current and
valid license from Philips for use by the customer’s designated in-house service employee on equipment located at the customer’s designated site. Use of
this document by unauthorized persons is strictly prohibited. Report violation of these requirements to the Philips Legal Department. This document must
be returned to Philips when the user is no longer licensed and in any event upon Philips’ first written request.
Objectives
j
After completing this lesson you be able to do the following:

• Be familiar with your Mx16 Course instructors

• State the course objectives and organization
• Complete Administrative Tasks
• Recognize the layout of the Cleveland Facility
• Follow the course schedule
• List the ground rules for the Mx16 course
• Locate the course documentation
• State your responsibility for the lab assignments
• Be familiar with your fellow students

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
Major
j Topics
p
This lesson will cover the following topics:

• Instructor introductions
• Course guidelines
• Course schedule
• Lab tasks
• Facility
y information
• Documentation
• Class introductions

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course Instructors

Mike
Ellert

Kristin
Babroski Wim
Pladet

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course Objectives
• F
Familiarize
ili i theth student
t d t with
ith the
th Mx16
M 16 CT
Scanner by:
– Identifying the subsystems of the Mx16 to the level of the
Field Replaceable Unit (FRU).
– U
Utilize
e the
eddiagnostic
ag os c tools
oo s a
available
a ab e for
o se
servicing
c g the
eCCT
system
– Provide Hands On experience for Service and
Repair/Replacement procedures
– Calibrating the system to the point that will allow the CT
system to meet the published image specifications
– Navigation of available documentation

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course Objectives II

• What we are NOT going to do in this course:

– Detailed analysis of schematics and circuits.
– Make you Products Specialists

• What we want to provide you:

– Survival skills
– Work from Block Diagrams
g
– Skills to use system logs (Service Tools)
– Experience in repair and replacement of FRUs (Field
Replaceable Units)
– System / Subsystem Calibration
– Software / Firmware Installation
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course General Information

• Course is 2 weeks in length:

– Beginning Tuesday, November 2, and Ending Friday, November 12,
2010

• Course runs 1 shift with 3 students or less per shift (3

per system)
• Class schedule 8:00am till 5:00pm daily
• Lab session every day

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Student Expectations

• It is expected that students make the most of the available time

on the course
course.
• Preparation for lecture and labs is essential.

– Read Labs before attending the Lab session

session.
• During a lab session:
– Any available time after completion of the lab module should
be utilized by exploring the system or additional
troubleshooting
g bugs.
g

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course Schedule  Week 1

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course Schedule  Week 2

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course Ground Rules
• Turn off p
pagers
g and cell p
phones!!
• U.S. Philips Service Engineers change your status to “In-Training”
• Please return from breaks promptly!
• Refreshments
R f h t and
d snacks
k are permitted
itt d iin th
the classroom.
l H
However,
please keep the noise from wrappers to a minimum.
• Laptops should be used to display the Current Topics.
• Office Communicator enabled laptops should use this tool appropriately.
• Network connections in the classroom are raw internet.
– Philips students will need to use iRAS to connect to the Philips
Global Network (PGN)
• Network connections in the lab area are both PGN and RSN.
– Non-Philips students are not permitted to connect to network
connections in lab area.
– Laptops are NOT to be connected to the network in the lab unless
instructed by the lab module or instructor.
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Mx16 Course Ground Rules II
• Fridays are casual dress day – Jeans & sneakers OK
OK. (no sandals).
sandals)
• Breaks during Labs are at the discretion of the lab group.
• Lab Logbooks are to be filled out each day to reflect lab work
performed.
• Keep Labs neat  The system should be in the same shape it was in
when the class started.
• Do not borrow tools from other labs.
• Scanner is to be left fully functional.
• A two-person
t rule
l applies
li tto students
t d t wishing
i hi tto work
k iin th
the llab
b after
ft
hours.
• No labs are to be circumvented.
• The Cleveland Facility is a Philips Premier Site. Customers, colleges,
and schools are often given tours through the facility including Service
Training areas – Dress & act accordingly
accordingly.
– No game playing or searching inappropriate websites at anytime!!!
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Course Documentation
• Installation
I t ll ti andd Service
S i Manual
M l
– Provided in electronic documentation
• Technical Drawings
– Most drawings will be provided in paper form so that you may take
notes on them.
– All Power Point lectures are provided on paper
• Electronic Documentation
– You will be given the latest CD after this presentation
– Time will be provided for you to install the documentation and
ensure it works properly

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Cleveland Facility Information
• Parking
– You may park in any available spaces
– Do not park in visitor or reserved spaces
• Entrances
– Only the Main Entrance can be entered before 6:00 AM and after
7:00 PM and on weekends
– All other entrances require a digital ID badge to enter, but not to exit
– Philips
Phili FSE’
FSE’s may sign
i outt a door
d b
badge
d
– Co-Ops are required to always be accompanied by a Philips FSE in
Philips facilities
• Smoking Areas
– Shelters are provided in the parking areas for smoking outside
entrances R and D.
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Our Location
Facility Address:
NORTH 595 Miner Rd
Rd.
Highland Heights, OH
44143

WEST EAST
595 Miner
M Rd

SOUTH
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Our Location – Arrival Routes

Alpha Drr.
Miner Rd.

To Hotels

Wilson Mills Rd.

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Building Entrances & Parking

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Building Map
D

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Administrative Tasks
• ID / Door Badges (Philips FSE’s only)
– Sign-up sheet filled out in Auditorium
• Radiation
R di ti Badges
B d
– Sign-up sheet filled out in Auditorium

Door & Radiation Badges MUST be returned on the last

day of the course!

• Service Training
g Student Guide
– Contains: General Information, Lodging &
Transportation, Policies and Procedures
• Training Vehicle Assignment
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
 Student Introductions

N
Now iis the
th time
ti for
f us, andd the
th restt off the
th
class to meet you !

• Please tell us your Name, where you are from, how long you have
been in CT
CT, and your Medical Imaging background
• How many Mx16’s you have or are expecting to get in the future.
• What do YOU want to learn from this class?

WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.
WARNING: THIS PAGE CONTAINS COPYRIGHTED MATERIALS THAT ARE CONFIDENTIAL AND/OR PROPRIETARY. ANY RELEASE OR
DISTRIBUTION OF THIS MATERIAL, WITHOUT PERMISSION, IS A VIOLATION OF LAW.