MULTITOOL DIAGRAM

A
1. Accessory Shank
The part of the Dremel accessory that
is inserted into the tool. Most of the
Dremel accessory shank sizes are 3.2
mm. Other sizes include 2.4 mm, 1.6 mm
and 0.8 mm.

2. Collet nut 4. MultiChuck

Tightening the collet nut forces the Allows users to change accessories
collet’s fingers inward, securing without the use of any collet in the
accessories for use. Avoid excessive tool. Works with the Dremel Corded
tightening. and Cordless high speed multitools,
and all attachments except the router,
cutting guide, grout removal, chainsaw
sharpening and lawnmower sharpening
attachments.

3. Collet 5. Shaft
The most precise way to hold an The rotating part of the Dremel multitool
accessory in a high speed multitool. where the collet is inserted. The shaft is
Even at high speeds and maximum threaded for attaching the collet nut or
pressure, collets stay tight. The collet is the MultiChuck.
located underneath the collet nut inside
the tool’s shaft.

Attaching an accessory to the tool using the collet and collet nut

1. Your tool comes with an 3.2 mm collet and collet nut. 5. Loosen and remove collet nut.
2. Now determine the accessory shank size. 6. Insert properly sized collet.
3. Select a collet to fit the shank diameter of the 7. Replace but do not tighten collet nut.
accessory. 8. Insert shank of accessory.
4. Depress shaft lock button. 9. Tighten collet nut.

8
 MULTITOOL DIAGRAM

A
8. Wrench
Used to loosen and tighten the collet
nut. Also works as a screwdriver for the
#402 mandrel.

7. Shaft lock button 11. Bail

Keeps the shaft from rotating which A wire loop for hanging the tool.
aids in the loosening or removal of the
collet nut or MultiChuck.

6. Housing cap
Unscrews from the multitool to
expose threads for mounting Dremel
attachments.

10. Air Vents

Proper airflow is required
to keep the motor running
cool. When using the
tool, do not block the air
vents.

9. On/off switch and Speed

Control
Turns the tool on and off and allows for
selection of the rotation speed. Some
tools have a separate on/off switch.
Dremel 8200
Dremel 4000
Dremel 200 – series
Dremel 8100
Dremel 7700
Accessory change by EZ Twist nose cap, Dremel 3000
use of the wrench no wrench needed New EZ Twist

Attaching an accessory to the Dremel EZ Change

tool using the MultiChuck Exclusively new to the Dremel 4200, Dremel presents
1. Your tool comes with an 3.2 mm collet and collet EZ Change. To change accessories simply pull down the
nut. lever at each side, place in an accessory then release!
2. Depress shaft lock button. No need for a wrench or lock button and no twising!
3. Loosen and remove collet and collet nut
from your tool.
4. Begin to thread the MultiChuck onto the tool
shaft while keeping shaft lock button depressed.
5. As the jaws begin to close, insert the shank of
the accessory into the chuck.

9
 MULTITOOL ACCESSORIES

Dremel, the inventor of the Multitool, now brings you Dremel EZ SpeedClic. An innovation that makes
changing accessories quick and easy. Through a patented and wheel design, Dremel has found a way that
enables you to change your accessory in 3 simple steps – Pull, Click, Twist – without using any tools.

Overview of the full range of EZ SpeedClic accessories:

SC541 423S SC406/SC456/ SC409

SC456B

SC476 SC544 SC545 511S

512S 471S SC411 SC407

472S 473S SC413

11
MULTITOOL ACCESSORIES

Carving and engraving bits Carving and engraving bits are the largest category of Dremel accessories.
Their overall sharpness and durability allow them to last a long time when used properly.
Router bits are used for edging and grooving wood, and making things like letter signs and picture frames.
Should be always used with plunge router attachment or sharper/router table.

High Speed Cutters Engraving Cutters Structured tooth

Can be used for shaping, hollowing, Quality cutters for detail engraving, tungsten carbide cutters
grooving, slotting, and making carving, routing in wood, fiberglass, Fast cutting sharp teeth for greater
tapered holes in soft metal, plastics plastic and soft metals. (3.2 mm material removal. Use on fiberglass,
and wood. shank). wood, plastic, epoxy, rubber,
laminates, chipboard, soft metals,
and ceramic wall tiles.

Diamond wheel points Tungsten carbide cutters

For fine detail work, engraving, Use for shaping, smoothing and
carving, touch-up and finishing. material removal. Use on hardened
Use on wood, jade, ceramic, glass, steel, stainless steel, cast iron,
hardened steel, semiprecious stones non-ferrous metals, fired ceramics,
and other hard materials. Bits are plastics, hardwoods and other hard
covered with diamond particles. materials.
(3.2 mm shank).

Routing

Router Piloted Bits Straight router bits Other decorative Keyhole Router Bit
Designed to work on only Straight bits are flat on the router bits Use keyhole router bit for
the edge of the wood. bottom and can be used for Can be used for grooving, routing mounting slots in
Can be used to create routing down the centre or carving, lettering and other wood objects.
decorative edges on v interior of a piece of wood. decorative shapes.
arious wood items. They can also be used for
cutting square grooves
and for leveling recessed
12 areas.
 MULTITOOL ACCESSORIES

Grinding and Sharpening The accessories in this category have many practical, do-it-yourself applications.
They accomplish the everyday, money-saving things like sharpening mower blades, boat propellers and chainsaw
blades. They can also deburr, smooth, grind and clean a variety of materials around the home and garden.

Silicon carbide grinding Aluminum oxide grinding EZ SpeedClic Grinding

stones stones wheel SC541
Designed to work well on stone, Use on metals, castings, welded The Dremel SC541 Grinding Wheel
glass, ceramics, porcelain and non- joints, rivets and rust. Ideal for is ideal for grinding and deburring
ferrous metals. sharpening, deburring and general all sort of metals. The EZ SpeedClic
purpose grinding of most materials. system enables quick and keyless
accessory change.

Abrasive points Chainsaw sharpening

Great for finishing work and light stones
deburring. They can be used for Precision ground for quick, easy
paint and rust removal without sharpening of chainsaw blades with
removing any of the base material. attachment.

13
MULTITOOL ACCESSORIES

Cleaning and Polishing Dremel cleaning and polishing accessories include brushes, felt
accessories, buffing wheels and rubber points.

Polishing accessories Polishing compound Rubber polishing points

Includes an EZ Speedclic cloth A hard, solid compound used For finishing and polishing all ferrous
buffing wheel and felt polishing with the felt or cloth accessories metals (containing iron). Effective
points and wheels. Use with to polish metal and plastics. on stones and ceramics and on
mandrels #401, #402 and SC402. Polishing compound removes a dull removing small burrs and scratch
oxidation film and/or light surface marks. (3.2 mm shank).
imperfections.

Impregnated Polishing Stainless steel brushes 1) Brass brushes 1)

Wheel Will not cause “after-rust” when Non-sparking and softer than steel.
Impregnated polishing wheel for used on corrosive-resistant They won’t scratch soft metal like
light stock removal and high luster materials like pewter, aluminium and gold and copper.
polishing. Works on several materials. stainless steel.
Polishing compound is not needed.

Carbon steel brushes 1) Bristle brushes 1)

Versatile brush for removing rust Use for light deburring, cleaning,
and corrosion, polishing metal polishing of silverware, jewellery
surfaces. and other precious metals.

1)
Do not run in excess of 15,000 rpm

14
 MULTITOOL ACCESSORIES

Cutting Dremel provides two types of cutting accessories; cutting bits and cut-off wheels.

Cutting bits
Cutting bits are used with the Dremel cutting guide and cut in a manner similar to spiral saw blades in any direction.

Drywall cutting bit 1) Multipurpose Tile cutting bit 1) 2) Grout removal bit
cutting bit 1)

Cut-off wheels
Cut Off wheels Make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglass reinforced
cut-off wheels are for tough application. The cut-off wheels cuts only along its edge.

Cut-off wheels 3) Fiberglass reinforced EZ SpeedClic

cut-off wheel 3) diamond wheel

Carbide cutting/shaping wheel

For slotting, slicing and shaping on its edge and face. This wheel will
work on soft and hard wood, fiberglass, plastics and laminates.

1)
For use with cutting guide attachment / 2) Not for use on floor tiles / 3) Use with #402 mandrel

15
MULTITOOL ACCESSORIES

Sanding Dremel sanding accessories include sanding drums, bands, discs, flapwheels and abrasive buffs to
remove and smooth material.

Sanding bands Sanding discs Flapwheels

For rough shaping, smoothing wood For rough shaping, smoothing For grinding and polishing flat or
and fiberglass, removing rust from wood and fiberglass, removing rust contoured surfaces. Flapwheels are
metal surfaces and shaping rubber from metal surfaces and shaping used most effectively as a finishing
surfaces. Sanding bands are easily rubber surfaces. Sanding discs sander after heavier surface
replaceable on the appropriate sized are available in finer grits than the sanding and material removal is
sanding drums. sanding drums and are used for fine completed.
detail sanding. Use with the #402
and SC402 mandrels.

EZ SpeedClic Finishing abrasive buffs

Finishing abrasive buffs medium + course and fine. For precise and delicate material removal on metal, glass,
wood and plastic. The flexible material enables to work on tight and irregularly shaped areas.

EZ SpeedClic Detailed Abrasive Brushes

The Detailed Abrasive Brushes have very flexible bristles which allow removal of the exterior “surface layer”
without damaging the base layer below. This can be used for deburring, cleaning, finishing of detailed parts, tiny
areas and irregular places

16
 MULTITOOL ACCESSORIES

Collets, Mandrels and Miscellaneous The grey category features the miscellaneous extras, like drill
bits, collets and mandrels.

MultiChuck Collets Collet Nut

Allows you to quickly and easily The most precise way to hold an Used to tighten the collet, securing
change accessories on your Dremel accessory in a high speed multitool. accessories for use.
multitools without using collets. Even at high speeds, under maximum
The MultiChuck works with all at- pressure, collets will stay tight.
tachments except the router, cutting
guide, grout removal chainsaw
sharpening and lawnmower sharp-
ening attachment.

Drill Bit Set Wood Drill Bit Set Mandrels

7 bits for drilling into wood and soft 4 drill bits with centering point for Used to mount a variety of different
metal. drilling into wood. The titanium accessories.
coating offers high performance and
longer lifetime.

Glass Drilling Bits

The Glass Drilling Bits 662 and 663
are ideal to cut holes in glass. With
the included cooling fluid you can
drill perfect holes with a 3.2mm and
6.4mm diameter.

17
MULTITOOL ACCESSORY SETS
100 Pieces

B
135 Pieces 165 Pieces

Multipurpose Accessory Wood Working Accessory Cutting & Grinding

set set Accessory set
These Modulary Dremel Accessory This Dremel Wood Working Set This Dremel Cutting & Grinding Set
Set contains a wide range of the contains a special selection of contains the most popular Dremel
most popular genuine Dremel genuine Dremel accessories cutting & grinding accessories
accessories (including EZ SpeedClic). (including EZ SpeedClic); all you (including EZ SpeedClic) and two
The accessories are packed in two need for all your wood working useful attachments: Line & Circle
connectable storage cases (the 100 projects. It also includes two Cutter and Cutting Guide, perfect
pieces has 1 case). attachments: Shaping Platform (for for all your cutting & grinding jobs
These modular storage cases can excellent control when sanding) in metal, stone and plastic. The
be connected to similar Dremel and Detailer’s Grip (for increased accessories and attachments
storage cases, to create and expand control), especially designed are packed in two unique and
your own storage system. with wood working in mind. The connectable modular storage cases.
accessories and attachments These modular storage cases can
are packed in two unique and be connected to similar Dremel
connectable modular storage cases. storage cases, to create and expand
These modular storage cases can your own storage system.
be connected to similar Dremel
storage cases, to create and expand
your own storage system.

Cleaning/Polishing Multipurpose set Cutting set set EZ SpeedClic

set (684) (687) (688) Cutting set (SC690)
All you need for cleaning Assortment of best selling Assortment of 68 cut-off Assortment of 10 unique,
and polishing in a accessories in a convenient wheels in a convenient patented EZ SpeedClic
convenient box. Removable box. Removable accessory box. Removable accessory cutting wheels and special
accessory tray and 3 tray and 3 dividers provide tray and 3 dividers provide EZ SpeedClic mandrel.
dividers provide perfect perfect storage solution. perfect storage solution. Besides 6 regular 38 mm
storage solution. metal cutting wheels the
kit includes 2 special thin
cutting wheels (thickness
0.75mm) and 2 unique
20 plastic cutting wheels.
 MULTITOOL ATTACHMENTS

C
With Dremel attachments you can do your job with even more precision and ease. Dremel offers
the versatility you need to easily reach the hardest places; find the best position to work and fix any
object by setting up a workstation at home.

Right angle attachment (575)

Enhances the versatility of your Dremel multitool
by allowing you to get into hard-to-reach areas.

■ Smooth and cool operation.

■ Coupling system allows you to place.
the attachment on your tool in 12 different
directions.
■ Quick connect system easily attaches to your
multitool.
■ Compact, durable design for those “hard-to-
reach” places.

Flex-shaft (225)
Ideal for hard to reach places.

■ Comfort grip handpiece allows fingertip control.

■ 127 mm bend radius provides more comfort
during use.
■ Quick connect attaches the multitool in
seconds.
■ Integrated shaft lock button makes for easy
accessory changes.

ATTACHMENTS TO REACH

21
MULTITOOL ATTACHMENTS

Plunge router attachment (335)

Transforms your multitool into a router for edging,
grooving and freehand routing.

■ Plastic knobs for easy tool assembly, depth.

adjustment, and edge and circle guide assemblies.
■ Easy guide handles with pop off caps for router bit
storage.
■ Edge guide allows for accurate straight edge
cuts.
■ Circle guide routs perfect circles.

Router table (231):

Converts your multitool into a bench mounted wood
shaper.

■ Plastic knobs for easy tool assembly and depth

adjustment.
■ Smooth table surface to slide your work piece
easily over the table.
■ Large 203.2 mm x 152.4 mm worktable.
■ Slot, groove, sand and trim edges.

ATTACHMENTS TO ROUT

Chainsaw sharpening attachment

(1453):
Easily sharpen the dullest of chains.

■ Four sizes of sharpening stones.

■ Adjustment gauge.

ATTACHMENTS TO SHARPEN

22
 MULTITOOL ATTACHMENTS

Multipurpose cutting kit (565)

Cutting a variety of materials.

■ Easily attaches to multitool.

■ Plastic knob for easy cutting depth adjustment.
■ Two drywall cutting bits.
■ One multipurpose bit for cutting seiling tile,
wood, plastic, fiberglass, drywall, laminate and
plastic mouldings.

Wall tile cutting Kit (566)

Includes cutting guide and bit for cutting and
shaping ceramic wall tiles. (Not for use on floor
tiles)

■ Easily attaches to multitool.

■ Plastic knob for easy cutting depth adjustment.
■ One tile cutting bit for shaping ceramic tile.

Wall & floor grout removal Kit (568)

For use on wall and floor grout.

■ Plastic knob for easy slide depth adjustment.

■ 30º angle for controlled cutting.
■ Guides keep bit centred between tiles.
■ Easy screw on mounting.
■ Includes 1.6 mm grout removal bit.

Circle cutter (678)

Makes perfect round and straight cuts

■ Easily connects to you Dremel tool

■ Included cutting bits are perfect for cuts in
drywall, wood and laminate
■ Maximum cutting diameter is 30 cm

ATTACHMENTS TO CUT

23
MULTITOOL ATTACHMENTS

Workstation (220)
This is the perfect solution for stationary with your
Dremel.

■ Drill vertically or in angle, adjustable in

increments of 15 degrees.
■ Holds tool horizontally for polishing and sanding.
■ Integrated, telescoping tools stand holds tool
with flex shaft (225).
■ On-board accessory storage.
■ Cord management keeps cord safely stowed.
■ Depth marking for consistent depth adjustment.
■ Base markings (Metric and Inches).

Flex-shaft tool Holder (2222)

Conveniently suspends your Dremel multitool above
your workbench.

■ Perfect for use with flex-shaft.

■ Clamps to workbenchs up to 50mm thick.
■ Adjustable height from 300 to 1070mm.
■ Stores extra bits on its base.

Dremel® Detailer’s Grip Attachment

The Dremel Detailer’s Grip attachment enables you to
have even better control of your multitool when doing
DIY, hobby and craft projects

■ Detailer’s Grip Attachment

■ Stencil Template
■ 107 Engraving Cutter
■ 481 Collet 2.4 mm

Dremel® Shaping Platform Attachment

The Dremel Shaping Platform enables you to sand and grind at
perfect 90 and 45 degree angles.

■ Shaping Platform Attachment

■ 407 Sanding Mandrel and Band
■ 932 Grinding Stone

ATTACHMENTS TO CONTROL

24
 MULTITOOL ATTACHMENTS

Dremel Multi-Vise (2500)

The Dremel 3 in 1 Multi-Vise. Stationary vise, stand
alone clamp & toolholder.

■ Clamps to any workbench, table or countertop.

■ Rotates 360º and tilts 50º. Allows approaching
the workpiece from a comfortable angle.
■ Jaws may be used with base unit or detached
for use as a stand-alone bar clamp.
■ Easily accommodates larger work pieces.
■ Stabilize oversize objects and protect delicate
pieces from damage.
■ Allows round and odd-shaped objects.
■ Makes removal of objects from jaws fast.
■ Resists twisting and bowing for solid stability.
ATTACHMENTS TO CONTROL

Mini saw (670)

Transforms your Dremel tool into a precision
circular saw for fine, clear and straight cuts in all
sorts of wood.

■ Perfect for laminate and wood flooring or thin

wood plates.
■ The safety guard and lower guard make it safe
to use the circular saw blade.
■ The guide allows to make straight cuts.
■ Quick connect attaches your Dremel tool in
seconds.
■ This mini saw attachment is easier to use than
a hard saw, more precise than a jig saw and fits
in tighter spaces than a circular saw.
ATTACHMENTS TO SAW

25
HINTS AND TIPS

Using Mandrel 401:

Screw accessory on to the mandrel firmly.
The accessories should be used with this mandrel are: 414 / 422 / 429 / 425

Using Mandrel 402*:

Loosen screw.
Replace accessory.
Tighten screw. Do not overtighten
The accessories should be used with this mandrel are:
541 / 456 / 426 / 540 / 420 / 409 / 411 / 412 / 413

Using MultiChuck:
It accepts accessories from 0,4mm to 3,4mm shank. Dremel MultiChuck
uses similar system as a conventional driller and dismiss the use of any
collet. And you can loosen and tighten it using hands

Using collets:
Dremel accessories have different shank sizes, depending on the accessory
you might need to use a different collet. Collets sizes are: 3,2mm / 2,4mm /
1,6mm / 0,8mm. Your Multitool comes with a 3.2mm collet

Using Dremel EZ SpeedClic:

Through a patented mandrel and wheel design, Dremel has found a way
that enables you to change your accessory in 3 simple steps:
Pull, Click, Twist – Without using any tools.

*Hint: For loosening and tightening screws use bottom of the wrench

30
 HINTS AND TIPS

Where to buy? Tool gripping:

You can find the nearest dealer online: Go to our Dealer One-handed grip: Overhand grip on the tool with fingers
locator at [Link] curved over the top of the tool and the thumb underneath.
Tennis style underhand grip. It is useful for drilling horizontally
Warranty:
All Dremel tools have 2 years warranty and all attachments 1 Two-Handed grips give extra stability. An underhand-overhand
year warranty combination gives firm support. This grip is particularly useful
for grinding, sanding and polishing.
Impregnating polishing wheels with
polishing compound: Pencil grip is used mainly for engraving; polishing detailed
This is a solid compound. Add a few drops of water to the applications.
compound and touch the polishing wheel to the compound at a
lowspeed to impregnate it.

Why does the multitool have high

speeds?
High speed when coupled with the right accessory is what
makes the multitool so useful. The best results generally
happen when taking a less aggressive but more frequent pass.
Over pressure can damage the accessory and the work piece. One-Handed grip Two-handed grip Pencil grip

Speed guide:

Speed Speed Speed Speed Speed

Material
Drilling Routing Sawing Engraving/Griding Shaping/Carving
Acrylic
Plastics PVS Low Low Low Low Low
ABS
Hardwood Medium Medium Medium Medium
Natural Wood NR*
Softwood High High High High
MDF High High High NR* High
Chipboard NR*
Man-made Wood
Hardboard Medium Medium Medium NR* NR*
Plywood Medium
Ferrous
Brass
Metal Low Low Low Low Low
Copper
Aluminiun
Ceramics
Glass
Other Low NR* NR* High High
Stone
Slate
Speed is part of an operational formula and depends on several variables, including the density of the material; the type of cutter being used; and the
depth of cut being applied. These are variables that should be considered with each application, preferably after some trial using waste material.
NR*: Not Recommended

31