CATALOGUE
Sl. No. ITEM SPECIFICATION QUANTITY PICTURE
1 1’ PVC Pipes 1” 20 Pc
2 3’ PVC Pipes 1” 9 Pc
3 6” PVC Pipes 1” 4 pc
2 Way PVC joint (Elbow
4 1” 9 Pc
joint)
5 3 Way PVC joint (T joint) 1” 30 Pc
6 PVC End Cap 1” 4 Pc
PVC Adapter (With
7 3/4" 1 Pc
Threads)
8 5’ PVC Pipe 3/4" 1 Pc
9 NFT Pipes 5 Net Pots 2 Pc
10 NFT End Cap 3/4” 4 Pc
11 Water Pump 40 W 1 Pc
1|Page
Volts:12V
Amps:3.0 Amps
Electric diaphragm pump
12 Flow:4.5 Amps 1 Pc
(High pressure mist maker)
Press:110PSI
(6.8 Bar)
Spray diameter:
13 Sprinkler 6 Pc
0.3 m
14 Sprinkler Pipe 1/4 “ 8 Ft
15 Mist Pump Pipe 1/2” 3 ft
16 Electric Switch Board PVC Board 1 Pc
Material: PVC
17 Electrical Switch 5 Pc
18 Indicator Red Light 1 Pc
3 Pin
19 Electric Plug 1 Pc
6A
3 Pin
20 Electric Socket 1 pc
6A
21 Copper Wire 4.5 Mtr
22 Net Pots Depth: 2 ” 10 Pc
2|Page
Humus and
23 Coco Peat 15 Pc
Nutrients
24 Fly Ash In Net pots 100 gm
Nitrogen
25 NPK Nutrients Phosphorus 3 Units
Potassium
After thorough analysis and comparison of the new models with the previous iteration, we proceeded
to develop the final model. This version was meticulously designed to streamline the installation of
NFT pipes, integrate sensors for automation, and facilitate seamless electrical connections. The aim was
to create a system that not only was good in functionality but also prioritized user-friendly setup and
operation.
Fig 4.9 : Final Design for 2nd Model
(Source : Shaper 3d software)
The Dimensions of the new Model are as follows:
• Height: 3 ft 6 inches
• Length: 3 ft
• Breadth: 1 ft
• NFT length: 3 ft
• Water Container Capacity: 25 Litres
3|Page
