10 MHz FUNCTION GENERATOR
ABVOLT UFG-10
Abvolt 10 MHz Function Generator offers a wide functional capability at a modest price. This
compact unit has ranges from 1Hz to 10 MHz. Range & function selection adds convenience to
versatility. Added features such as voltage control and a separate pulse output suitable for
synchronization or driving TTL logic circuits are not normally found in function generators of this price
range.. The instrument is designed using easily available components resulting in ease of
serviceability. Greater emphasis has been put on ruggedness & reliability with the use of single pcb
for complete circuit. The lower frequencies are of special interest to servo manufacturers. Offers sine,
square, triangle functions upto 10 MHz.
TECHNICAL SPECIFICATIONS
Frequency Range : 1Hz - 10MHz. in decadic steps, variable control between steps
Functions : Sine, Square, Triangle, Ramp, Pulse & TTL pulse output
Display : Digital - LCD for Frequency with automatic decimal position
Accuracy : Freq : better than + 1% + 1digit.
Amplitude : Open circuit : 20 V p-p (Sine ,Square, Triangle)
+ 5 V in DC mode
Into 50 ohms : 10Vp-p (Sine ,Square, Triangle)
Peak amp + DC offset < +10 V
Attenuator : 2 steps attenuators 20dB each and vernier fine 20dB
Amplitude flatness : upto 3MHz : + 0.5dB
above 3MHz : + 1dB
DC Offset : Upto + 5V + 5% into open circuit
(switchable) + 2.5V + 5% into 50 ohm
Output Impedance : 50 ohms + 10%
Waveform Characteristics :
Sine wave Distortion : < 1.5% typical
Square wave Rise time : < 50nsec approx.
Triangle Non Linearity: <1% ( 100KHz.)
Ramp / Pulse : 20 : 80 variation (upto 2MHz)
Trigger Pulse output
Sync Output : TTL Level
Modulation : AM / FM / ASK / FSK / PWM
Modes : Int / Ext modes
Freq Counter : INT / EXT modes
Ext : 1Hz to 20MHz
I/p level : min 150mV r.m.s.
General :
Power Supply : 230V+/-10%, 50Hz
Accessories : Instruction Manual
Test Leads : 1 x BNC to Crocodile
1 x Power cord
SPECIFICATIONS ARE SUBJECT TO CHANGE DUE TO CONSTANT
DEVELOPMENTS WITHOUT ANY PRIOR NOTICE
