Low Flow Saves on Water and Chemicals
Toftejorg Midget MiniFlow Rotary Spray Head PD 66397 GB1 2003-08
Application
The Toftejorg Midget MiniFlow is a special version of the Toftejorg
SaniMidget rotary spray head that provides low-flow, compact
design ideal for insertion in small openings. With its rotating fan
cleaning action, the spray head uses very low volumes of clean-
ing media at low pressure. The Toftejorg Midget MiniFlow is an
effective replacement for traditional static spray balls and is suit-
able for all industrial cleaning applications. It can be used in tanks
ranging from 0.1 to 10 m3 (27 to 2,700 US gallons). Application
and optimal positioning assistance is available in CAD format.
Working Principle
The flow of the cleaning media causes the head of the Toftejorg
Midget MiniFlow to rotate, with fan jets laying out a swirling pat-
tern throughout the vessel. This generates the impact needed
to efficiently remove residual product, while the cascading flow
covers all internal surfaces of the tank or reactor.
Standard Design
As standard documentation, the Toftejorg Midget MiniFlow
can be supplied with a “Declaration of Conformity” for material
specifications. Ordering
Please specify required connections, material selection and
Materials type of certification required. Please also confirm the applica-
Housing: SAF 2205 (UNS31803) tion suitability.
Balls: 1.4401 (316)
Options
Technical Data - Downpipes with Tri-Clamp and flange connections
Weight: Thread and clip-on: 0.30 kg (0.66 - Electropolishing
lbs) - 3.1.B certification can be quoted on request
On pipe: 0.55/0.90 kg (1.21/1.98
lbs)
Lubricant: Self-lubricating with the cleaning
fluid
Working pressure: 1 - 3 bar (14.5 - 44 psi)
Recommended pressure: 2 bar (29 psi)
Max. working temperature: 95 oC (203 oF)
Max. ambient temperature: 140 oC (284 oF)
Wetting radius: Max. 3 m (10 ft)
Impact cleaning radius: Max. effective 1.4 m (4 ft)
Connections: 1/2” or 3/4” BSP or NPT
thread.
Clip-on, weld joint (butt weld),
other on request
Flow Rate Cleaning Radius
For clip-on
models, the
flow rate is
increased
by approx
0.5 m3/h.
Dimensions (mm)
The information contained herein is correct at the time of
PD 66397 GB1 2003-08 issue, but may be subject to change without prior notice.
How to contact Alfa Laval
Contact details for all countries are
continually updated on our website.
Please visit www.alfalaval.com or
www.toftejorg.com to access the
information direct.
