Omnicomm Online

Integration Manual
02.04.2020
 Contents

6 General Information

6 Main Features
6 REST
API

7 SOAP

8 Connection

9 Demo access to the web-services

9 REST
API

9 SOAP

10 REST API
10 Obtaining the rights to use REST
API

10 Authorization
10 User
Management
10 Vehicle
Management
11 Geofence
Management
11 Notification
Handling
11 Reports
11 Omnicomm Video
Service
12 Obtaining a video fragment

12 Restrictions
12 Unsuccessful authorization attempts

12 Authorized calls

13 Unauthorized calls

13 SOAP
13 SOAP Methods
List
13 signIn – authorization

13 getObjectSet – list of objects

14 getSmoothedFuel – smoothed fuel level for the period

16 getFuelConsumption – fuel consumption for the period

16 getEvents – list of events

18 getMileage – mileage for the period

18 getEngineOnTime – engine running time for the period

19 getVehiclesState – VH current status

20 getMileageSpeedExcess – mileage with excess speeding for the period

20 getMovementTime – movement time for the period

21 getEngineOnTimeInMovement – engine running time in movement for the

period

21 getEngineOnTimeWithoutMovement – engine running time without movement

for the period

23 getEngineOffTime – engine shutdown time for the period

23 getFuelConsumptionInMovement – fuel consumption during movement for the

period

24 getFuelConsumptionWithoutMovement – fuel consumption without movement

for the period
25 getFuelConsumptionInMotohour – fuel consumption per motor hour

25 getFuelAtTime – fuel level at a given moment

27 getUserNotificationsByPeriod – user notifications by the period

28 getVisitedGeozonesByPeriod – geofences visited by the period

28 getVehiclesParams – list of parameters available to the user

30 signOut – session termination

30 getActiveNotificationRules – profiles of active notifications

31 setDeviceIdToNotificationRules – assignment of notification profiles to VH

32 getFuelLevelsByTimeMoment – fuel level at a certain time

33 getFuelLevelsByPeriod – fuel level by the period of time

34 getSmoothedFuelLevelsByPeriod – smoothed fuel levels by the period of time

35 getRefuelingsAndDrainsByPeriod – fuel draining/refueling operations by the

period of time

35 getVehiclesProfiles – VH profiles matching the VH identifiers

36 getCurrentObjectState – vehicle current status

37 getReportData – report for auxiliary equipment over the period, TPMS,

IQFreeze

38 getSEOnTime – auxiliary equipment running time for the period

38 getStatisticsByPeriod – statistics for the period

41 getTracksByPeriod – VH track for the period

41 getTrack – track

42 getEngineStatisticsByPeriod – engine operation statistics for a period

44 getShiftDataByPeriod – information about the shifts

46 getIntervalsInfo – information divided into intervals

48 Errors
48 Work Client
Example
49 Types of
Events
General Information

Omnicomm Online
Omnicomm Online allows the user to control the operation of vehicles and
drivers by means of reports being part of it. To access Omnicomm Online
only a personal computer is required, connected to the Internet.
Omnicomm Online has built-in special-purpose tools to collect the
processed data and use them in the accounting documents and in the
fleet monitoring systems.
This manual describes the built-in tools operation and the integration with
third-party systems.

General Information
The integration with Omnicomm Online is used to expand the
functionality of third-party systems and to automate the input of data
obtained from Omnicomm Online into the accounting systems.
The following integration methods are available:

REST API

using the SOAP protocol

We recommend using REST API for integration. It is not possible to

expand integration capabilities using the SOAP protocol.

The integration module for Omnicomm system should be developed and

deployed by the third-party accounting system implementers.
Omnicomm does not undertake to delegate specialists or to develop the
integration module for third-party systems.

Main Features
REST API
REST API facilitates the automation of:

user management

vehicle profile management

6
General Information

geofence management

receiving reports

receiving notifications

using the OVMS (video service) subsystem

REST API makes it possible to quickly start collecting, processing, and

monitoring data from vehicles.

SOAP
Data, downloaded from the Omnicomm Online system, allows, at the
initiation of appropriate functionality of third-party systems, the following
tasks to be performed automatically:

Entering data on mileage and fuel consumption in the waybills

Accounting for mileage and usage time for calculating the amount of
work, driver’s salary, etc.

Accounting for attachable equipment to calculate scope of performed

work

Accounting for mileage, engine hours and auxiliary equipment for

maintenance planning

Write-off of fuel consumed

Comparison of documented refills with the actual ones to prevent theft

of fuel

Generation of violation reports

Plan vs. actual analysis on work done, fuel used, etc.

Use of the current location to select suitable vehicle to fulfill the order

Track visualization on the map in a third-party software

Various reports can be generated using the vehicle parameters

downloaded from Omnicomm Online.
Data from Omnicomm Online enable quick estimation of the accepted
planning system correctness and effective dealing with all the possible
machinations of fleet employees, associated with theft of petroleum
products and unauthorized use of vehicles.
The main targets for the integration of the systems are accounting

7
Connection

systems, ERP-systems, and branch accounting systems.

SOAP protocol does not support the use of OVMS (video service)
subsystem. Use REST API for quick integration with the OVMS subsystem.

Web services provide for retrieving the following parameters:

Mileage

Fuel consumption

Engine operation time

Auxiliary equipment operation time

Fuel volume graph

Mileage with exceeded speed*

Movement duration*

Engine operation time in motion*

Engine operation without motion*

“Engine Off” time*

Fuel level at a given moment*

Fuel consumption in motion*

Fuel consumption without motion*

Fuel consumption rate per one hour of engine operation*

Track*

Actual location*

* – Parameters marked are available from version 2.4.2.

In addition to these parameters, it is possible to receive all the events
displayed in the “Events” report in Omnicomm Online.

Connection
To obtain the connection address for web services, the client should
contact Omnicomm’s Technological Support Team.
Connection to the web-service is performed by the Technical Support

8
Demo access to the web-services

Team Ph. 8 800 100-24-42, ext.5

Demo access to the web-services

REST API
Use the following for demo access:
address: [Link]
username: demodealer
password: demodealer1

SOAP
If necessary, to test the connection to web-services (to verify the
application without using a real Omnicomm Online account, or if there is
doubt about the network settings), one can use the web-services demo
server of Omnicomm.
Web services connection address:
[Link]
Login: rudemoru Password: rudemo123456

9
REST API

REST API
You can find the API method specification at
[Link]

Obtaining the rights to use REST API

Please contact the Omnicomm technical support by emailing to
support@[Link] to obtain the rights to use REST API.

Authorization
A JWT token must be indicated in the Authorization header when
accessing the REST API methods (except for authorization methods). This
JWT token grants the right to use REST API.
JWT format: JWT<space><the JWT received from the authorization
method>
Example:
Authorization: JWT
eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpZCI6MTU3MDM1OTEsImxvZ2luIjoiYWR
4ifQ.0I0CXcwWWxZWARE0eUEPOAvKd0prW_Uf0jbOMLnd5SI
The JWT expiry day is indicated in the payload-attribute exp in the Unix
Time Stamp format in UTC. After the expiry, when accessing the method
the Error 401 Unauthorized will appear.
The JWT can be obtained using the method POST /auth/login?jwt=1 or,
upon expiry, post /auth/refresh by indicating in the Authorization refresh
header the JWT obtained during the authorization from post /auth/login?
jwt=1.

User Management
User management covers adding, deleting, and blocking users in
Omnicomm Online, as well as getting a list of all Omnicomm Online users.
An authorized user may access the vehicle data.
An external system can carry out tasks on a user's behalf after logging in
under their account (after obtaining the JWT with the user's right).
Description of user management methods: [Link]
[Link]/#/Users/

Vehicle Management

10
REST API

It is necessary to add a vehicle profile to enable the processing of vehicle

data in Omnicomm Online.
A vehicle is identified by a unique string identifier (UUID), which assigned
when a new vehicle profile is added to Omnicomm Online, or by the
terminal identification number.
Vehicles can be added to groups and the same vehicle can belong to
more than one group. It is also possible to configure access to vehicle
groups for users. Vehicle groups are created when a user is added as well
as in the Omnicomm Online interface.
Description of vehicle management methods:
[Link]

Geofence Management
Geofences are virtual areas on the map created by users in Оmnicomm
Оnline. When creating a geofence, specify its shape (a polygon, a circle,
or a line) and its geographic coordinates.
Geofences are used to monitor vehicle location (entering/exiting a
geofence) and other operation parameters, such as the vehicle's speed.
Description of geofence management methods:
[Link]

Notification Handling
Notifications are used to promptly notify users about recorded events.
Description of methods for handling notifications:
[Link]

Reports
Reports are used to obtain various information about vehicle operation.
Description of methods for obtaining reports:
[Link]

Omnicomm Video Service

The Omnicomm video service covers the video terminal management and
provides video material to the user.
Main features of the service:

11
REST API

receiving, storing, modifying, and providing data of video terminal

profiles

receiving, storing, modifying, and providing task parameters for video

file download

executing video file download tasks

Description of methods for managing the video service:

[Link]

Obtaining a video fragment

This section describes how to use the video service in a typical scenario.
To obtain a video fragment:
1. Log in to the account of a dealer or a user who has rights to the vehicle
and to use the video service: POST /auth/login?jwt=1
2. Get the video profile from the vehicle terminal ID: GET
/service/ovms/api/profiles
3. Get the video file:

Create a task to obtain the video fragment based on the received video
profile: POST /service/ovms/api/tasks

Periodically check the task's status: GET

/service/ovms/api/tasks/{task_id}

After receiving the “done” status for the task, request the video file:
GET /service/ovms/api/tasks/file/{task_id}

Restrictions
There are restrictions on the intensity of requests that may be sent to the
Onmicomm Online REST API to protect it against DoS-attacks and errors
of third-party systems.
When these restrictions are exceeded, any requests from the
corresponding IP address or user to the REST API will be blocked.

Unsuccessful authorization attempts

Not more than 10 in 1 minute from the same IP-address.

Authorized calls

12
SOAP

Not more than 180 in 1 minute for each user.

Unauthorized calls
Not more than 60 in one minute from the same IP-address.

SOAP
SOAP Methods List
For date and time data transmitting the UNIXTIME (in seconds) format is
used. Units of other parameters are listed below.

signIn – authorization

Input Values

String login – user name in the system

String password – password in the system

Returned Values

Boolean status – true/false true in case of successful authorization

String sessionId – in case of successful authentication, the session identifier
(minimum 16 characters)
Unixtimestamp dateTimeEnd – in case of successful authorization, time of
the session termination (the time after which you must log in again)
String error – error message in case of improper authorization (incorrectly
entered username and password, or incorrect data format)

getObjectSet – list of objects

13
SOAP

Input Values

String sessionId – session ID obtained during authorization

Returned Values

Boolean status – true/false true in case of successful operation.

String error – error message in case an error occur
Dataset objects – list of vehicles available to the user — owner of the
registered session (meaning only those objects which the user has the right to
view):
Integer id – object identifier (the same as the identifier of the unit)
String objectName – name of vehicle
String objectType – type of vehicle
String GarageNumber – garage number

getSmoothedFuel – smoothed fuel level for the period

Input Values

String sessionId – session identifier obtaied during authorization

Integer objectId – identifier of vehicle / unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

14
SOAP

Returned Values

Boolean status – true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Dataset fuel – data set (all the data from the archive for the selected period):
Unixtimestamp timeStamp – time of the registered fuel level
Double smothedFuel – smoothed value of the fuel, liters, accuracy up to 0.1 l
String error – error message in case an error occur

15
SOAP

getFuelConsumption – fuel consumption for the period

Input Values

String sessionId - session identifier obtained during authorization

Integer objectId - identifier of vehicle / unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) - end time of the interval

Returned Values

Boolean status - true/false true in case of successful operation.

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double fuelConsumption – fuel consumption for the period, liters, accuracy
up to 0.1 l
String error – error message in case an error occur

getEvents – list of events

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit. Optional parameter, if the
identifier is not present, it returns the data for all vehicles.
Integer type – type of event, required.
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) - end time of the interval

16
SOAP

Returned Values

Boolean status – true/false true in case of successful operation.

String error - error message in case an error occur
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Dataset objectEvents – data set for each event:
Unixtimestamp timeStamp – date and time of the event
Integer objectId – identifier of vehicle/ unit
String type – type of event
String parameters – parameters of the event
String eventAddress – address of the event, if available
String iButton – iButton code in HEX. Only for events such as ‘Driver’
String name – name of geofence. Only for entry and exit to or from Geofence
events

17
SOAP

getMileage – mileage for the period

Input Values

String sessionId – session identifier during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) - end time of the interval

Returned Values

Boolean status - – true/false true in case of successful operation.

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double Mileage – mileage in km for the specified interval, accuracy 0.1 km
String error – error message in case an error occur

getEngineOnTime – engine running time for the period

Input Values

String sessionId - session identifier obtained during authorization

Integer objectId - identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) - end time of the interval

18
SOAP

Returned Values

Boolean status - true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double engineOnTime – total running time of the engine, in seconds
String error – error message in case an error occur

getVehiclesState – VH current status

Input Values

String sessionId – session identifier obtained during authorization

VehiclesType vehicles – list of VH IDs

Returned Values

Boolean status – operation status

String error – error message in case an error occur
vehicleStatesType states – list of parameters describing each VH status

19
SOAP

getMileageSpeedExcess – mileage with excess speeding for the

period

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

Returned Values

Boolean status - true/false true in case of successful operation.

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double mileageSpeedExcess – mileage with speeding in km for the
specified interval, accuracy 0.1 km
String error – error message in case an error occur

getMovementTime – movement time for the period

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – the identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

20
SOAP

Returned Values

Boolean status - true/false true in case of successful operation.

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double movementTime – movement time, seconds
String error – error message in case an error occur

getEngineOnTimeInMovement – engine running time in

movement for the period

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

Returned Values

Boolean status - true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double engineOnTimeInMovement – engine running time during
movement, seconds
String error – error message in case an error occur

getEngineOnTimeWithoutMovement – engine running time

without movement for the period

21
SOAP

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

Returned Values

Boolean status – true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double engineOnTimeWithoutMovement – engine running time without
movement, seconds
String error – error message in case an error occur

22
SOAP

getEngineOffTime – engine shutdown time for the period

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

Returned Values

Boolean status - true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double engineOffTime – engine shutdown time for the period, seconds
String error – error message in case an error occur

getFuelConsumptionInMovement – fuel consumption during

movement for the period

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

23
SOAP

Returned Values

Boolean status - true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double fuelConsumptionInMovement – fuel consumption during movement
for the period, liters, accuracy 0.1 liters
String error – error message when an error occurs

getFuelConsumptionWithoutMovement – fuel consumption

without movement for the period

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

Returned Values

Boolean status – true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double fuelConsumptionWithout Movement – fuel consumption without
movement for the period, litres, accuracy 0.1 l
String error – error message when an error occurs

24
SOAP

getFuelConsumptionInMotohour – fuel consumption per motor

hour

Input Values

String sessionId – session identifier obtaind during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

Returned Values

Boolean status - true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double fuelConsumptionIn Motohour – average fuel consumption for the
engine hour for the period, liters, accuracy 0.1 l
String error – error message when an error occurs

getFuelAtTime – fuel level at a given moment

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp time (seconds) – moment of time

25
SOAP

Returned Values

Boolean status - true/false true in case of successful operation

Unixtimestamp time (seconds) – moment of time
Double fuelAtTime – fuel level at a given moment, litres, accuracy 0.1 l
String error – error message in case an error occur

26
SOAP

getUserNotificationsByPeriod – user notifications by the period

Input Values

String sessionId – session identifier obtained during authorization

Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds. If not
defined, end time = system time of the request execution by the server
Integer page – requested page number. If not defined, first page containing
perPage records is returned
Integer perPage – quantity of records per page, if not defined, quantity is not
limited

Returned Values

Boolean status – operation status. True in case of successful operation

String error – error message in case an error occur
Unixtimestamp timeBegin – start time of the interval (UTC) , seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds
userNotificationsType userNotifications – array of returning parameters sets
Integer notificationsCount – total number of notifications for all pages. If no
notification found, error code 10 is returned

27
SOAP

getVisitedGeozonesByPeriod – geofences visited by the period

Input Values

String sessionId – session identifier obtained during authorization

Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds
vehicleIdsType vehicleId – list of the VH IDs. If absent, all available vehicles
are used for request

Returned Values

Boolean status – operation status

String error – error message in case en error occur
Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds
visitedGeozone geozoneVisits – block of arrays of visited geofences
parameters

getVehiclesParams – list of parameters available to the user

Input Values

String sessionId – session identifier obtained during authorization

28
SOAP

Returned Values

Boolean status – operation status

String error – error message in case an error occur
Vehicle vehicles – VH parameters that the current user is entitled to view

29
SOAP

signOut – session termination

Input Values

String sessionId – session identifier obtained during authorization

Returned Values

Boolean status – operation status

String error – error message in case an error occur
String sessionId – terminated session ID

getActiveNotificationRules – profiles of active notifications

Input Values

String sessionId – session identifier obtained during authorization

Returned Values

Boolean status – operation status

String error – error message in case an error occur
rulesType rules – parameters for each notification profile

30
SOAP

setDeviceIdToNotificationRules – assignment of notification

profiles to VH

Input Values

String sessionId – session ID obtained during authorization

String deviceId – device ID
String deviceTypeId – device type identifier
rulesType rules – identifiers of notification profiles to which it is necessary to
assign VH

Returned Values

Boolean status – operation status

String error – error message in case an error occur

31
SOAP

getFuelLevelsByTimeMoment – fuel level at a certain time

Input Values

String sessionId – session identifier obtained during authorization

Unixtimestamp timeMoment – moment of time (UTC), seconds
vehicleAndTankIdsType
vehicleAndTankIds – list of vehicles and fuel tanks IDs.
In the absence of the list, the request will be executed for all vehicles and
tanks available to the user

Returned Values

Boolean status – operation status

String error – error message in case an error occur
Unixtimestamp timeMoment – moment of time (UTC), seconds
fuelData fuelDataSet – list of parameters for each VH:
int vehicleId – vehicle identifier;
int tankNumber – fuel tank number;
fuelLevelsType fuelLevels – fuel level data;
activityPeriodsType activityPeriods – engine operation data;
ignitionOffListType ignitionOffList – ignition- OFF data;
ignitionOnListType ignitionOnList – ignition-ON data;
llsFailurePeriodsType
llsFailurePeriods – data on fuel level sensor failures

32
SOAP

getFuelLevelsByPeriod – fuel level by the period of time

Input Values

String sessionId – session identifier obtained during authorization

Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds. If the end
time is not indicated, the end time of the period = the system time of the
beginning of the Server-side request processing
VehicleAndTankIdsType
vehicleAndTankIds – list of vehicles and fuel tanks IDs.
In the absence of the list, the request will be executed for all vehicles and
tanks available to the user
Int reduce – thinning:
0 = not required
1 = required

Returned Values

Boolean status – operation status

String error – error message in case an error occur
Unixtimestamp timeBegin – start time of the period (UTC), seconds
Unixtimestamp timeEnd – end time of the period (UTC), seconds
fuelData fuelDataSet – list of parameters for each vehicle:
int vehicleId – VH identifier;
int tankNumber – fuel tank number;
fuelLevelsType fuelLevels – fuel level data;
activityPeriodsType activityPeriods – engine operation data;
ignitionOffListType ignitionOffList – ignition- OFF data;
ignitionOnListType ignitionOnList – ignition-ON data;
llsFailurePeriodsType
llsFailurePeriods – data on fuel level sensor failures

33
SOAP

getSmoothedFuelLevelsByPeriod – smoothed fuel levels by the

period of time

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – object identifier
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
vehicleAndTankIdsType vehicleAndTankIds – list of vehicles and fuel tanks
IDs. In the absence of the list, the request will be executed for all vehicles and
tanks available to the user
Int reduce – thinning:
0 = not required
1 = required

Returned Values

Boolean status – operation status

String error – error message in case an error occur
Unixtimestamp timeBegin – start time of the period (UTC), seconds
Unixtimestamp timeEnd – end time of the period (UTC), seconds
fuelData fuelDataSet – list of parameters for each VH:
int vehicleId – VH identifier;
int tankNumber – fuel tank number;
fuelLevelsType fuelLevels – fuel level data;
activityPeriodsType activityPeriods – engine operation data;
ignitionOffListType ignitionOffList – ignition- OFF data;
ignitionOnListType ignitionOnList – ignition-ON data;
llsFailurePeriodsType
llsFailurePeriods – data on fuel level sensor failures

34
SOAP

getRefuelingsAndDrainsByPeriod – fuel draining/refueling

operations by the period of time

Input Values

String sessionId – session identifier obtained during authorization

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
vehicleAndTankIdsType vehicleAndTankIds – list of vehicles and fuel tanks
IDs. In the absence of the list, the request will be executed for all vehicles and
tanks available to the user
Integer page – number of the requested page with data
Integer perPage – number of entries per page; if it is not preset, it will be
taken as unlimited one
String sortname – field by which it is necessary to sort out the return
parameters
String sortorder – sort order:
asc – ascending
desc – descending

Returned Values

Boolean status – operation status

String error – error mesage in case an error occur
Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds
Integer entriesCounter – total number of entries by the period of time
RefuelingsAndDrainsType
RefuelingsAndDrains – list of parameters for each VH

getVehiclesProfiles – VH profiles matching the VH identifiers

35
SOAP

Input Values

String sessionId – session identifier obtained during authorization

VehiclesType vehicles – list of VH IDs

Returned Values

Boolean status – operation status

String error – error message in case an error occur
Vehicles – list of parameters for each VH

getCurrentObjectState – vehicle current status

Input Values

String sessionId – session ID obtained during authorization

Integer objectId – object identifier

36
SOAP

Returned Values

Boolean status – true/false. True in case of successful operation.

String error - error message in case an error occur
String lastGPS – latest valid coordinates. Contains latitude and longitude
values separated by a semi-colon
Integer lastGPSDir – movement direction, degrees from 0 to 359
Double currentSpeed – current speed at the given moment, in kph, accuracy
0.1 kph
Double currentFuel – current fuel level, in litres, accuracy 0.1 l
Boolean currentIgn – ignition status. True if the ignition is ON
Boolean speedExceed – speed threshold exceed. True in case of speed
threshold exceeded
Integer lastGPSSat – number of satellites with the last valid coordinates
Double currentInputValue – actual value of universal input. Attributes:
Integer number – UI number, String name – UI name

getReportData – report for auxiliary equipment over the period,

TPMS, IQFreeze

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – object identifier
Long timeBegin – start time of the interval (UTC), seconds
Long timeEnd – end time of the interval (UTC), seconds
String reportTemplateID – identifier of report template in Omnicomm Online.
Possible values: addEquipment, TPMS, refState, refWork

37
SOAP

Returned Values

Boolean status – true / false. True in case of successful operation

String error – error message in case an error occur
ReportDataType reportData – array including report data

getSEOnTime – auxiliary equipment running time for the period

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – identifier of vehicle/unit
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) - end time of the interval

Returned Values

Boolean status - true/false true in case of successful operation

Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Double sEOnTime (seconds) – auxiliary equipment running time for every
connected UI. Attributes: Integer number – UI number, String name – UI name

getStatisticsByPeriod – statistics for the period

38
SOAP

Input Values

String sessionId – session identifier obtained during authorization

Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds. If not
defined, end time = system time of the request execution by the server.
int objectType – type of object:
0=vehicle;
1=driver;
If the type does not not exist, error code 12 is returned.
objectIdsType objectIds – array of the type objectIdsType, containing list of
objectId parameters of int type. In case of non-existance, the query is
performed for all the objectId of the corresponding type, available to the user.
requiredStatParamsType requiredStatParams – list of the required
subgroups of the ‘Statistics’ report parameters. If the list is empty, all the
subgroups with all parameters are returned

39
SOAP

Returned Values

movingAndWorkingParamsType movementAndWorkingParams – subgroup

of VH movement and operation parameters. If the list is empty, all the
parameters of the subgroup are returned, otherwise only the enumerated
parameters are returned. If the subgroup is not transmitted, the whole
subgroup will not be returned.
fuelParamsType fuelParams – subgroup of parameters for fuel, draining and
refuellings. If the list is empty, all the parameters of the sub- group are
returned, otherwise only the enumerated parameters are returned. If the
subgroup is not transmitted, the whole subgroup will not be returned.
optionalEquipmentParamsType optionalEquipmentParams – subgroup of
auxiliary equipment parameters. If the list is empty, all the parameters of the
subgroup are returned, otherwise only the enumerated parameters are
returned. If the subgroup is not transmitted, the whole subgroup will not be
returned.
CANDataParamsType CANDataParams – subgroup of CAN parameters. If the
list is empty, all the parameters of the subgroup are returned, otherwise only
the enumerated parameters are returned. If the subgroup is not transmitted,
the whole subgroup will not be returned.
addDataParamsType addDataParams – subgroup of statistics aditional
parameters: TPMS, iQFreeze, etc.

40
SOAP

getTracksByPeriod – VH track for the period

Input Values

String sessionId – session identifier obtained during authorization

Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds. If the end
time is not indicated, the end time of the period = the system time of the
beginning of the Server-side request processing
VehiclesType vehicles – list of vehicle ID
Int reduce – thinning:
0 = not required
1 = required

Returned Values

Boolean status – operation status

String error – error message in case an error occur
Unixtimestamp timeBegin – start time of the interval (UTC), seconds
Unixtimestamp timeEnd – end time of the interval (UTC), seconds
trackDataSetType trackDataSet – parameters of the track for every vehicle:
trackPoint – parameters of the track point by one vehicle
unixtimestamp timestamp – time of the event when the coordinates have
been fixed
Integer latitude – latitude with accuracy of 0.0000001 degree
Integer longitude – longitude with accuracy of 0.0000001 degree
Integer direction – direction, degrees
Integer sattelitesCount – number of satellites
Double speed (km/hour) – speed
Long timeStamp (seconds) – time of event. (UTC)

getTrack – track

41
SOAP

Input Values

String sessionId – session identifier obtained during authorization

Integer objectId – object identifier
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval

Returned Values

Boolean status – true/false true in case of successful operation

String error – error message in case an error occur
Unixtimestamp timeBegin (seconds) – start time of the interval
Unixtimestamp timeEnd (seconds) – end time of the interval
Dataset trackEvents – array of track points:
String gpsPos – event coordinates. Contains latitude and longitude values
separated by a semicolon
Integer gpsDir – movement direction, degrees from 0 to 359
Integer sattelitesCount – number of satellites
Double speed – speed, in km/hour with accuracy up to 0.1 km/hour
Unixtimestamp timeStamp – point date and time

getEngineStatisticsByPeriod – engine operation statistics for a

period

Input values

String sessionId – session identifier received during the authorization

Integer vehicleId – vehicle identifier
Unixtimestamp timeBegin (seconds) – interval start time
Unixtimestamp timeEnd (seconds) – interval end time

42
SOAP

Returned Values

Boolean status – true/false. Returns 'true' if the operation was successful

String error – text of the error message that appears when the error occurs
Unixtimestamp timeBegin (seconds) – interval start time
Unixtimestamp timeEnd (seconds) – interval end time
Unixtimestamp lastDataTimestamp (seconds) – – timestamp of the last
processed data (UTC)
Unixtimestamp operationStartDate (seconds) – operation start time for the
period (UTC)
Unixtimestamp operationEndDate (seconds) – operation end time for the
period (UTC)
Integer operationTime (seconds) – operation time for the period
Integer engineOffTime (seconds) – engine off time for the period Integer
Integer engineOnTime (seconds) – engine on time for the period
Integer engineIdlingTime (seconds) – engine idle operation time for the
period Integer
Integer engineOperationTimeNormalSpeed (seconds) – engine operation
time under normal load for the period
Integer engineOperationTimeMaxSpeed (seconds) – engine operation time
at ultimate load for the period
Integer engineLoadTime (seconds) – engine operation time under load for
the period
Integer dataAbsenceTime (seconds) – time of data absence for the period

43
SOAP

getShiftDataByPeriod – information about the shifts

Input values

String sessionId – session identifier received during the authorization

Unixtimestamp timeBegin (seconds) – scheduled shift start time
Unixtimestamp timeEnd (seconds) – scheduled shift end time
Integer devBeforeBegin (seconds) – allowed deviation from the shift start
time ahead of schedule
Integer devAfterBegin (seconds) – allowed deviation from the shift start time
behind schedule
Integer devBeforeEnd (seconds) – allowed deviation from the shift end time
ahead of schedule
Integer devAfterEnd (seconds) – allowed deviation from the shift end time
behind schedule
Integer vehicleId – vehicle identifier

44
SOAP

Returned Values

Boolean status – true/false. Returns 'true' if the operation was successful

String error – text of the error message that appears when the error occurs
Integer vehicleId – vehicle identifier
Integer vehicleType – vehicle type (0 - car, 1 - fuel tanker)
shiftData:
Unixtimestamp pointDate (seconds) – actual time of shift start/end (UTC)
Integer engineOperationTime (seconds) – engine operation time at the
moment of actual shift start/end
Integer shiftEngineOperationTime (seconds) – engine operation time
for the shift
Double mileage (km) – engine operation time at the moment of actual
shift start/end
Double shiftMileage (km) – mileage for the shift
fuelData – fuel parameters group:

Double fuelVolume (l) – fuel volume at the moment of actual shift

start/end
Double fuelConsumption (l) – actual consumption at the moment of
actual shift start/end

45
SOAP

getIntervalsInfo – information divided into intervals

Input values

String sessionId – session identifier received during the authorization

Integer vehicleId – vehicle identifier
Unixtimestamp timeBegin (seconds) – interval start time
Unixtimestamp timeEnd (seconds) – interval end time
Boolean partsFlag – division into parts (true or false)
Integer interval (min) – interval length
Boolean geocodingFlag – address resolution based on the coordinates(true
or false)
Boolean additionalTankFlag – returns a data set on the fuel level in the
additional tank (true or false)

46
SOAP

Returned Values

Boolean status – true/false. Returns 'true' if the operation was successful

Integer errorCode – error code. Possible error codes:
2: Authorization required - authorization is required to access the data
3: Dead session number – the session has expired, re-authorization is required
4: Bad interval – incorrect time interval entered
5: Bad object – there is no vehicle with this identifier
7: Unusable object– the value cannot be calculated for an object with this
identifier.
9: Access denied – no access rights to the object
10: Data not found – there is no data for the corresponding input values (no
raw data events for the [request period + one event before the period start])
11:Blocked interval – the requested interval contains data blocking periods
13: Invalid format – the format is incorrect
14: Undefined error – the error is unspecified
19: Too many intervals: current N, allowed M - the number of intervals per
period (N) exceeds the limit (M)
String erorrDescription – optional
Integer vehicleId – vehicle identifier
Integer vehicleType – vehicle type (0 - car, 1 - fuel tanker)
Integer tanksNumber – the number of fuel tanks
Integer numberOfIntervals – the number of intervals in the request period
periodData – the data set for the request period
intervalsData – the data for the interval:
Integer intervalNumber – interval sequence number
Unixtimestamp startTime – interval start date
Unixtimestamp endTime – interval end date
statData – statistics data set
gpsData – GPS data set
engineData – data set on engine operation
fuelData – data set on fuel level
seData – data set on auxiliary equipment operation
canData – CAN bus data

47
SOAP

Errors
List of returned errors:
0: No errors – there are no errors
1: Signing in failed – incorrect Login / Password entered
2: Authorization required – authorization is required to access the data
3: Dead session number – session has expired, re-authorization is
required
4: Bad interval – incorrect time interval entered
5: Bad object – there is no object with this identifier
6: Admin login – someone is trying to log in as Admin User
7: Unusable object – the value cannot be calculated for the object with
this identifier
8: Bad event type – there is no event type with this identifier
9: Access denied – no authorization to access the object
10: Data not found – no data for the corresponding input values
11: Blocked interval – the requested interval contains data blocking
periods
12: Bad object type – the specified object type does not exist
13: Invalid format – the format is incorrect
14: Undefined error – the error is unspecified
15: 404 – page not found

Work Client Example

Import of Interfaces
wsimport -d bin -s src
[Link]
Java code:
It is necessary to change strings “user” and “pass” by real values.

package [Link];

import [Link].*;

import [Link];

48
SOAP

import [Link];

import [Link];

public class ExampleClient {

public static void main(String[] args) throws MalformedURLException {
AnalyticalServer = new AnalyticalServer(new URL("[Link]

AnalyticalServerWS port = [Link]();

AuthResponseEntry auth = [Link]("user", "pass");

String sessionId = [Link] ();

[Link]("auth sessionId: " + sessionId);

ObjectSetResponseEntry objects = [Link](sessionId);

List<Vehicle> vehicles = [Link]();

for (Vehicle vehicle : vehicles) {

[Link]("vehicle: %d / %s\n", [Link](), [Link]());
}

}
}

Types of Events

Event Meaning Parameter values, comments

type
number

1 Start of refuelling (for Value of refuelling, accuracy 0.1

refuelling tankers – fueling) litres

2 End of refuelling (for refuelling Value of refuelling, accuracy 0.1

tankers – fueling) litres

3 Beginning of draining Value of draining, accuracy 0.1

litres

49
SOAP

Event Meaning Parameter values, comments

type
number

4 End of draining Value of draining, accuracy 0.1

litres

5 Ignition ON Time from the last ignition switch

off, minutes

6 Ignition OFF

7 External power supply ON

8 Battery power ON

9 Driver authorisation iButton key code in HEX

10 Transition to roaming

11 Exit from roaming

12 Instant speeding Maximum speed value, accuracy

0.1 kph

13 Idle time

14 Beginning of speeding

15 Beginning of transaction Fuel volume before the beginning

groups (for refuelling tankers) of transaction groups, accuracy 0.1
litres

50
SOAP

Event Meaning Parameter values, comments

type
number

16 End of transactions group (for Fuel volume after finishing

refuelling tankers) transactions group, accuracy 0.1
litres

17 Start of fueling during

transactions group (for
refuelling tankers)

18 End of fueling during

transactions group (for
refuelling tankers)

19 Start of draining during

transactions group (for
refuelling tankers)

20 End of draining during

transactions group (for
refuelling tankers)

21 Connection established

22 Additional equipment turned

ON

23 Additional equipment turned

OFF

24 Exceeding the auxiliary

equipment max limits

51
SOAP

Event Meaning Parameter values, comments

type
number

25 Return to auxiliary equipment

normal values

31 Pressing the panic button

32 Overload of auxiliary
equipment

33 Power ON

34 Instant RPM exceeding

35 Entering the geofence

36 Exiting the geofence

38 Power OFF

42 Beginning of stop

43 End of stop

44 Beginning of acceleration

45 End of acceleration

46 Digital input ON

47 Digital input OFF

52
SOAP

Event Meaning Parameter values, comments

type
number

48 Instant acceleration

49 Unknown driver

52 Device tampering

53 Driver authorization finished

54 iButton applied

55 Deleted driver registration

53
info@omnicomm-
[Link]
[Link]-
[Link]